iPhone 5 c driver error

Similar Questions

• Windows XP does not recognize the iPhone - device not recognized error

  I am running Windows XP (SP2 I believe) and whenever I plug in my iPhone I get the error not recognized USB device. If iTunes does not recognize it and I can't sync. My guess is that I'm missing or have an updated driver, but I don't know how to install. If it makes a difference, I am using a brand new MacBook Pro and Windows XP via Parallels Desktop. I don't think it's the question, though, as I used to be able to sync with my Manager (ACT!) contacts via Outlook. It seems to be simply a function of Windows is not able to identify the iPhone via USB. A simple solution would be appreciated, but I'll take complicated if that's all that's available.

  Hello abogadopeter,

  Thank you for visiting the Microsoft answers community.

  This question has been a known issue that seems by Parallels. I did some research and read through some of the threads for workarounds. He doesn't seem to be a conclusive solution, but works to some extent. You can take a look at http://forum.parallels.com/search.php and simply search for ipod and look through some of these institutions.

  Hope this helps Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• 6 s iPhone download new software error message

  Today, I downloaded the upgrade of the iOS 10 software and sync with iPhone 6s received an error message. Now the phone is stuck on the peak of the cable that need to sync with iTunes. Hit restore, update, etc. and always stuck with peak on the phone. Tried to shut down phone, disconnect usb, etc and nothing will get in the phone to see whats up. Next steps?

  Try the steps on this page - If you can not update or restore your iPhone, iPad, or iPod touch - Apple Support

• Satellite T130-02F - display driver error

  Hello

  I just bought the Satellite T130-02F and after choosing 32-bit operating system, I had the power to recharge the battery and then started to get 'to display driver errors"where the screen black flash and then flash back on. I checked Device Manager and Driver Details, the reader is up to date and as far as I can see is the suitable driver. I searched websites to see if there are other drivers out there ar, but its update.

  I have nothing more have not installed on the computer again and find that I get the error more regularly on the farm rather than power, that concerns me. The computer is less than 24 hours old.
  Any advice?

  Mobile Intel (R) display firmware.
  Windows 7 32-bit is installed.

  Hello

  In your case I would try to reinstall the display driver. You can find the latest version on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  After that, make sure that the latest version of the BIOS is installed. You can download the Toshiba site too.

  If nothing works your only chance is an authorized service provider. It seems to be a hardware problem and should be checked for professional people.

  Welcome them

• Satellite Pro A40 guard stop with the ATI driver error message

  My girls having some problems with her laptop and get back to Uni at the end of week for me to have a look on.

  Basically, he keeps closing sometimes with an ATI graphics driver error message. I had updated the memory last Christmas and resinstalled from scratch.

  My first impressions are it is overheating and I probably need to clean the fan, was wondering if anyone had any ideas?

  Thank you very much
  Keith (South end)

  Satellite Pro A40 is about 3 years old and it is possible that the unit needs to be cleaned. If the appliance is used intensively, I assume that there is more dust inside. By overheating of the appliance stops suddenly without any warning.

  As a first step the device. I don't know if it's the right idea to do it alone, but if you are familiar with laptops, you can give a try. After having done that, your daughter should carefully watch what happens the next few days.

• PROTECTED M400 Sigmatel - audio driver errors

  I've been expereinceing a silent M400. I downloaded the drivers from Toshiba Web site Sigmatel and get the following error messages:

  Stacgui error
  Driver audio SigmaTel is inaccessible. Please make sure that it is installed and activated.

  C++ runtime error
  Program C:\Windows\Seyestem32\rundell32,exe
  The application requested execution to terminate in an unusual way. Please contact the customer support of applications.

  I tried to uninstall the drivers and hardware and then put it back. Has anyone ever seen the inaccessible before SigmaTel audio driver error?

  Hello

  What his reader, you are trying to install? Please can you tell us what OS you are using and the version nummer driver too?

• Try to restore my iPhone and I get the message "Cannot restore iPhone because an unknown error (50)." I got this message several times, how to fix?

  Try to restore my iPhone and I get the message "Cannot restore iPhone because an unknown error (50)." I can't chat because the phone is locked and I can not access my serial number. I got this message several times, how to fix?

  Have you already checked this discussion about this?

  The iPhone cannot be synced. An unknown error occurred (-50)

• If I sell my iPhone 6, indicating the error 53, for parts, should I worry about the person buying it have some sort of access to the personal data registered on this phone?

  If I sell my iPhone 6, indicating the error 53, for parts, should I worry about the person buying it have some sort of access to the personal data registered on this phone?

  Hello error 53 matched a UN failure to the home button you had to replace the screen or the home button alone or outside apple store so if you replace the button man of origin and you restored the iPhone error will be fixed but if you sell the buyer has no access to the data of the iPhone

• Satellite A100-599 - ACPI ATK0100 kernel at startup mode driver error

  I get an error msg (ACPI ATK0100 kernel mode driver error) at startup.
  I use Vista as my OS.

  Please advise as to how to fix this.

  Hello

  Hmm the message says something about ACPI
  As far as I know the ACPI is the installation of the power management of the Windows operating system. If you get this error message then, something must be wrong with the power management

  Have you tried to recover the laptop using the Toshiba disk?

• Satellite L350 - persistent master hard drive errors

  I've known persistent main hard disk errors. Errors, in their first incarnation, were windows freeze at loading screens and screensavers, and then developed by stopping Windows to boot at all. It certainly would not start normally and sometimes would not start in safe mode. I used the recovery partition to restore the computer to its factory settings. A day or two later, the same symptoms began to manifest again, although not as severely. The hard drive errors, freeze on screens and loading screen savers.

  My question is: if I re - format the hard drive master, thus destroying the recovery partition, I could then just restore windows from a newly formed recovery CD? And, in addition, what is the probability that reformatting the drive hard completely would have an effect on the frequency of errors?
  If the hard drive is simply borked, format or not? And if yes, what is the next step?
  Could I restore windows on my drive hard slave and give up on the master?

  Thanks in advance.
  Mike

  Hey Buddy,

  Are you sure that all these problems related to the HARD drive at 100%? How did you check that?

  I don t mean it s not the HARD drive, theoretically, you could be right but before you think to change the HARD drive please use a diagnostic tool special for HDD as Drive Fitness Test:
  http://www.HitachiGST.com/support/downloads/#DFT

  This tool can check your HARD drive for bad sectors.

  If the HARD features of bad sectors disk, formatting will not help you because the sectors are physically damaged. With other words, the only chance is to exchange it.

  But if you have already used the recovery feature of HARD Toshiba drive to reinstall Windows you can say s that no problem of software and it must be hardware related. ;)

• Hard drive error, does not start.

  Computer does not start. I get this failure code:
  Rw1xtw-7ax87b-mfpv6k-619403
  
  Can't find any information on this subject, can someone shed some light on this subject for me?

  Hello

  It decodes for hard drive error 305 or the hard drive has failed, you will need to get the replaced hard drive and reinstall the OS and have a Fresh start, note that all your data is saved on the hard drive will be lost.

• Now on windows 7, the games running slow - update video card driver error message and/or turn on hardware accelerator. Sony supporting not - how make to identift video card in my laptop?

  Now on windows 7, the games running slow - update video card driver error message and/or turn on hardware accelerator.  Sony supporting not - how make to identift video card in my laptop?

  Press the Windows key, type in "Device Manager" without the quotes and the Device Manager select from the list that appears, or press ENTER.

  In the window that appears, find graphics card and press the sign more or arrow to the left of it. It should fall down the name of the video card you have.

• No Audio device and Audio HDA Bus Driver Error Win XP SP3

  Hello

  I'm running a put together computer, with Windows XP SP3. I've recently accidentally got rid of my sound on my computer, eliminating the bad program in Add/Remove programs. I know that my computer is running Intel (r) 82801 AA AC 97 Audio Control. So I went to the thought of their site, I had deleted the drivers and audio devices. I downloaded the current driver, but this has not fixed the problem even with an update. So I went hunting online and found this link http://www.youtube.com/watch?v=9idzHNWZLP0

  , thinking maybe that would help me even though I am not a user real tek (have intel of course). But he said that it is compatible with windows xp. I tried downlaoding it and got the error: "could not complete the installation: missing Audio HDA Bus driver.

  So now, it seemed to me, I had not only a mistake, but two. I tried to download a driver of Bus HDA, but this failed. I tried to look in the Device Manager to see if there was a red or yellow marker next to my audio devices and maybe they needed to be reinstalled. Showing a problem there, he said nothing everythign was working properly. I tried to use Soundmax audio driver as well, but who was also discussed with the bus driver error. I also went to http://noaudiodevice.com , and these solutions do not work either because I was not faced with a problem of yellow or red marker. I also did this off stupidly deletling the bad thing no one updated.

  I'm almost at a loss at this point and was way over my head to start.
  I could really use some help. I know that my computer when I had one month ago second hand but wiped off, had run soundmax. If you need more information about my computer or screen shots please let me know. I looked at the subjects here, and none seem to adapt to this situation for me.

  Did you get the specific drivers for your motherboard?
  If this isn't the case, remember to search the downloads specific to what you have.

  You can try a system restore: http://support.microsoft.com/kb/306084

• Laptop HP 2000: hard drive error

  Hello
  I have upgraded to Windows 10 one a few days ago and then yesterday when I went to turn on my computer it says this.

  Hard drive error
  Please run the hard drive Test in the diagnostic system
  Hard disk 3 (3F1)

  I ran the test drive and that's what he said

  Smart check: PAST
  DST short: FAILURE

  Help, please!

  You will need to replace the hard drive. Update to Windows 10 had nothing to do with it. After the back if you want to help find a car and its installation and reinstallation of Windows. If your Windows 10 appeared as it is activated, you can do a clean reinstall of Windows 10.

• Can't turn on my XP computer, includes a multi driver error

  He has a multi driver error I can enter the command prompt, but it doesn't let me do a chkdsk r he says he's busy and just a chkdsk there doing nothing, but does not go into windows? any suggestions

  Hi JeannieBellLW,
   
  -What exactly happens when you try to boot into normal mode on your computer?
  -You receive an error message? If Yes, indicate the same.
  -What has been the recent change that was made on your computer before this problem started to happen?
   
  Try to start your computer in safe mode and check if you can successfully start.
   

  Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed.

  Refer to this article to do the same thing:

  A description of the options to start in Windows XP Mode