iPhone 6 will remain not connected

Similar Questions

• WRT54G v.5 will remain not connected to the new laptop / Windows 7 Premium

  WRT54G v.5 will remain not connected to the new laptop / Windows 7 Premium. It works continuously with a cycle detection, connection, loss of connection; detection, connection, loss of connection, etc... The router works through this cycle, basically acting as if I disconnected and then reconnected to the power to reset, it disrupts my Internet connection to my Wired iMac and wireless, another office to the floor. Paid for Linksys support today and through remote access, he put up a new network on my desktop (iMac). After finishing, the problem still exists. When I told him that the problem had not been corrected, he said just wait an hour or two and it should work itself. She, of course, did not himself. Any ideas out there?

  Nevermind - I seem to have solved the problem with a simple firmware. Funny how the Linksys technician support don't think to ask what version of the router I have or suggest that I should try to upgrade firmware first. However, he is quite good at trying to upsell me for a new router instead of trying to help me solve the problem I had. It makes me want to go buy Netgear next time, thanks a lot!

• I have an inspiron which will remain not connected to wireless internet but another computer works perfectly

  I have a Dell inspiration that will remain not connected to the internet wireless, but the other computer

  Are the two computers to the same distance from the router?   How many bars do you plan to connect?  You use without wireless - G or wireless-N?  Try clicking on the bars (next to the lower-right clck) then click on Open network and sharing Center, then click on wireless network connection and see that the number of MB/s is just above the bars in the middle of the right.  You should see something like 54 Mbps and at least 2 or 3 bars.

  Good luck.

• Windows Live will remain not connected

  Original title: won't remember

  My account will remain not connected, whenever I go to my email that I resign, even when I check the box to keep me signed.

  Hello

  -What browser are you using to access Windows live?

  -If you use Internet Explorer, then what is the version?

  I suggest you try the following steps if you are using Internet Explorer.

  1. open Internet Explorer, click the Start button. In the search box, and then type Internet Explorerin the list of results, click on Internet Explorer.

  2. press the ALT key then press click on Tools and then click Internet Options.

  3. click on the content tab.

  4. under AutoComplete, and then click settings.

  5 Select or clear checkboxes address bar, Forms, usernames and passwords on formsand ask me before saving passwords .

  6. click OKand then click OK again.

  For more information, visit the below mentioned link:

  http://Windows.Microsoft.com/en-us/Windows7/fill-in-website-forms-and-passwords-automatically

  If the problem persists, I suggest you to ask your question in the windows live forum

  http://windowslivehelp.com/

  Let us know if it helps.

• Guests who will remain not connected to vCenter

  4.1.0 ESXi and vCenter 4.1.0

  We have four hosts in a cluster, two have no problem while the other two will remain not connected to vCenter.  I checked all that in the article 1003409 (http://kb.vmware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1003409) and found no problem.

  Four servers are IBM x 3690 X 5 and all are connected to the same four SAN LUNS, the only difference is that for problem servers management interfaces are on a different subnet, but the port UDP 902 is open between them and the vCenter server.  I can reconnect manually, but they will be disconnected again in a minute or two.

  Does anyone have ideas beyond what is in the article 1003409 that I can check?

  Thank you

  Darryl

  Make sure you have port 902 open TCP , as well as UDP.

  See this article: http://kb.vmware.com/selfservice/documentLinkInt.do?micrositeID=&popup=true&languageId=&externalID=1012382

  Regarding the 902 TCP port:

  vCenter Server system uses to send data to managed hosts. This port should not be blocked by the firewall between the server and the host or between hosts

  If the problem persists, I would try to remove the host to vCenter inventory, add new. Who's going to reinstall agents vCenter on the hosts.

  EDIT: This particular excerpt was taken from the entrance to vCenter 5.x, but the same is true for vCenter 4.x (it is high on the table). To be clear, you 902 TCP and UDP open both vcenter for hosts, host to vCenter and host to host.

• Windows XP card reader will remain not connected

  We use a software called easy dental and occasionally when we try to open it gives an error message saying that it can not connect to the database... After talking with our easy dental support team, they have advised that call us microsoft Windows XP and tell them that "our card reader does not remain", these are the details I only... they thought that Microsoft would be able to walk us through the process for solve the problem

  By design, a mapped network drive disconnects after a period of inactivity.  We should return quickly when necessary.  For more information:

  "Drive mapped to the network connection may be lost.
    <>http://support.Microsoft.com/kb/297684 >

  HTH,
  JW

• case # 1178354456. Complete Windows is no longer install new programs. IE will remain not connected

  Windows Installer does not work.  programs (program of the printer) will not be installed.  That is to say wii not stay connected.  This uprade last saince for windows vista

  Hello JoeB66,

  You receive error messages when you try to install programs?

  Have you tried to install in compatibility mode printing software?

  http://Windows.Microsoft.com/en-us/Windows7/what-is-program-compatibility?SignedIn=1

  For your internet connection problems, I recommend you to look at this article and try the troubleshooting is:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

• When I download it will remain not connected?

  When I try to download every thing to "freewebs.com" he used uploaded to it, it keeps saying connect to the server, but will never connect. What I am doing wrong?
  

  Promblem fixed I had to just make a new site because it is not properly configured.

• RALink RT5390 802.11b/g/n WiFi Adapter will remain not connected

  I use a laptop of Hp 2000, and the adapter installed on the computer provided wireless is a Ralink RT5390 802.11b/g/n WiFi Adapter.  I ran the driver update tool, and it says I have install the driver update.  I have also run the tool to "Diagnose the problem", and he says that he has no problem.  However, the computer loses internet connection constantly.  I guess it has something to do with the wireless adapter, because all other wireless in the House have no problems. The operating system is Windows 7.  I'm a little tech savvy and can normally include questions to just play with it for a while, but this one has me dumb founded, and its very annoying when you try to do something and you just loose connection and have to start all over again. Help, please!

  Hello:

  I found that the relying on a tool the driver does not always provide information.

  Here is the link to the latest version of the driver if you don't v.3.2.12.0 (13 April 2012) installed.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & CC = US & prodTypeId = 321957 & prodSeriesId = 3688868 & swItem = ob-104619-1 & mode = 3

  Paul

• WIFI will remain not connected

  Buy HP Pavilion x 360.  Whenever I use my laptop I reconnect the WIFI via Network Diagnostics.  How can I keep my WIFI connected?  I don't know if mst be a setting somewhere.

  Hi tkveene,

  I'd love to help you, but it is necessary to get more details to help you properly. It would be useful to have the right product Pavilion number X 360 is a series with many variations. Please read the following document if you need help to find out who.

  How can I find my model number or product number?

  The following pages are useful for troubleshooting wireless connectivity problems.

  Troubleshooting wireless network and Internet (Windows 8)

  Universal solution WLAN, Wireless and Wi - Fi errors

  In addition, you can watch the the power management of your wireless adapter:
  Turn off the power to the adapter:
  1. open Device Manager. (Win Key + R > type devmgmt.msc > OK)
  2. expand the network adapters.
  3. right click on the Ethernet adapter / wireless, and then click Properties.
  4. click on the power management tab.
  5 remove the check mark next to allow the computer to turn off this device to save power.
  6. click on OK.
  7 test cycle.

  Also if you need to forget a network on your laptop, then you can try the following:

  How can we forget the wireless networking in Win 8, when it is in the range

  Go to settings in the menu of charms
  Windows key + i
  Click on the wireless icon
  Right-click on the network you want to forget
  Choose forget this network

  If the network is not in range that the procedure above does not work, use the following:
  Press the Windows key + x and press c to open a command prompt

  Then at the command prompt, type the following command to view a list of all networks wireless currently known on your computer.

  netsh wlan show profiles

  From the displayed list generated by this command, note the network name that you want to delete, and type the following command. The network name must be inside the quotes.

  netsh wlan delete profile name = "name of wireless network to forget."

  Please let me know if you need additional assistance. I hope it's useful for you.

  Kind regards

• iPhone and iPad does not connect to internet

  Hello

  Since yesterday, I was unable to connect to internet via wifi on my iPad and iPhone.  They show the power of the full signal and says I'm connected, but won't load Web pages or refresh applications.  When I disable wifi on my phone everything works fine on the LTE, but I don't want to use my data.

  I think it must be something with the update iOS because:

  -J' completely rebooted our router and modem and it worked on my iPad for about 30 seconds (what makes a Web page) before it stopped working again.

  -My boyfriend did not the last update on the iPad or iPhone, and both connect on our wifi at home, while my iPad or iPhone will connect to the internet.

  -My iPhone also does not connect to the wifi in my work, even though I know it works as I am online on my computer work via wifi.

  I noticed something strange on my iPhone and iPad when I went to check the settings wifi yesterday - the VPN configuration is flashing/refreshing without touching me, even if I don't have everything set up VPN connections.  When I actually click on VPN, an error is displayed.  There may be something wrong with the VPN on the new update which blocks the wifi signal?

  
  

  I really appreciate your help!
  

  If you are able to connect your iPad and iPhone to your wireless router agreement but the iPad and iPhone will not connect to internet, it is unlikely to have anything to do with the version of iOS.

  Try this:

  Restart your router (unplug unit, wait ten seconds and then reconnect it).

  Wait for the router shows all lights normal and connected.

  Now, reboot your iPad or iPhone

• My Iphone 5 c is not connect to any wifi after update ISO9, I only downloaded it 12/01/2015.

  After downloading the latest IOS 9.1 12/01/15, my phone can't conenct to my University, not even comments wifi wifi as it says 'unable to connect '.

  I tried all the option shown so far, restoring phone (unfortunately I can't restore before this date that my phone has since on my itunes and icloud), reset the network settings and reset the entire phone to factory settings.

  All wifi available are visible, whether they say cannot connect user name or incorrect password when I know that it correct.

  Any help would be greatly appreciated.

  Thank you

  Tim

  Hi Little_Timmy,

  The resources below provides troubleshooting steps for connectivity Wi - Fi with your iPhone.  Your administrator University computer SCIENCE may be able to help more because they have activated additional security settings.

  If your iPhone, iPad or iPod touch connects to a Wi - Fi network
  https://support.Apple.com/en-us/HT204051

  For more help, try restarting your device, router or cable/DSL modem. After each step, check to see if you solved the problem.
  • Restart your iOS device.
  • Unplug your router and plug it in again.
  • Unplug your cable or DSL modem and plug it in again.

  Still not connect?

  Reset your network settings. Tap Settings > General > reset > reset network settings. This also resets the Wi - Fi networks and passwords, cell parameters and VPN and APN settings you used before.

  If you use a network in a business, school, hotel, store or other place of Wi - Fi, find an employee for assistance.

  If you are connected to a Wi - Fi network, but you can't get online, try to use your Wi - Fi network on other devices. If you can't get online using your other devices, there could be an interruption of the service. Call your internet provider cable or the assistance company.

  Try to connect to a Wi - Fi network in a different location. If your device can connect, you will need to get help with your Wi - Fi network. If it cannot connect to Wi - Fi networks, contact Apple.

  Update your Wi - Fi router with the latest firmware and check that the router supports your Apple product. For more information, contact the manufacturer of your router.

  Take care

• iPhone 5s will be not updated

  We have a two 5s iPhone and an iPad. Yesterday an iPhone and iPad have been updated. Today, tried to update iPhone 5 woman's. Install now selected, log on again, and then reported, in the "update of rejects", "not connected to the internet. FAKE! Can navigate through Safari, peut has obtained about anywhere, but update software doesn't say so just enter the loop. Turn off and on. Linked reports. Unplug and replugged. Work to be done, but not up to date. 9.2.1 on his phone runing courses

  Apple pulled the iOS version 9.3 for iPhone 5 s. wait for a patch.

  (140944)

• Client VPN will travel not connected via 877w

  Hello

  I've implemented a Cisco 877w and it works very well for web access

  Client VPN on my laptop connects via the 877w and authenticates on my remote work ASA5510 firewall.

  Problem is after you connect to the ASA, I can not connect anything internally work network (10.0.0.0/24), ping, etc. RDP is back with no answer.

  I've attached the config, can someone tell me what I am missing, might access a list?

  Thanks for your help

  Chris

  This router is made PAT/NAT, Ipsec blocking.

  Activate Nat on the ASA course remote.

  ISAKMP nat - t or crypto isakmp nat - t

  HTH

  Sangaré

  Pls rate helpful messages

• iPhone 5 s is not connect to iTunes

  A week or two ago, I connected my phone to my computer to make a backup. As normal, iTunes open when the phone connected, but then he said that I had to update iTunes. I did this (version 12.5.1.21), but then iTunes does not recognize my phone and still does not work. The phone will appear in the file Explorer. When I connect the phone, I get a message on the phone asking to authorize access to pictures and videos, which I welcome. How can I my iTunes to recognize my phone. IOS is also updated to version 10.0.2.

  To get iTunes recognize your iPhone, follow the steps described in this article:

  If iTunes does not recognize your iPhone, iPad or iPod - Apple Support