iPhone not charging when connected to the USB power adapter

Similar Questions

• iPhone not charging when connected to the computer via USB

  Original title:

  I use windows 7, when I connect my iphone to laptop, it does not load .i don't know it's because of device drivers not installed.when I connect my phone to another laptop its load.  Thank you

  Hello

  1. are you facing problems with USB devices?

  2. that you get an error? If Yes, what is the exact error message?

  3. is your phone detected in iTunes?

  4. doesn't Windows detect the iPhone as storage medium?

  5. are you aware of any changes made to the computer, before the show?

  Method 1:

  Run the hardware troubleshooter and check the issue.

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  Try to plug it into a different USB port and verification.

  Method 3:

  Check out the following link.

  iOS: device not recognized in iTunes for Windows

  http://support.Apple.com/kb/TS1538

  I hope this helps.

• ZTE open not light unless it is connected to the USB power source.

  Even with the battery fully charged, my ZTE open never turn on unless it is connected to a USB power source. Once connected, it can be started, behaves normally and can be disconnected.

  You should contact the owner of the eBay store in this case.

• iPhone not charging when the Mac is in mode 'sleep'

  Before the OS X El Capitan 10.11.6 version update, I was able to charge my phone while my Macbook Pro was in mode 'sleep' / with the lid closed. Since the update to the latest version of El Capitan, the power to the USB ports immediately turns off when the laptop goes to sleep. Is it possible to fix this?

  Try a different USB port. There is only 1 USB port can charge the iPhone when the lid closed.

• USB device not recognized when connected to the computer

  original title: USB port problems

  When I plug a usb device, I get a message not recognized usb device (one of the usb devices attached to this computer has malfunctioned and windows does not recognize)

  Hello

  ·         Since when are you facing this problem? Were you able to use this USB device on the system before?

  ·         Remember to make changes to the system?

  ·         It happens with all USB devices that try you to plugin for the system?

  I suggest running the fix which is present in the article below and check if the problem persists.

  Advanced troubleshooting tips for General USB for Windows XP problems

  http://support.Microsoft.com/kb/310575

  Also, I suggest you return the item mentioned below.

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive

  http://support.Microsoft.com/kb/925196

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.

• My keyboard is not recognized by windows when connected to the USB ports.

  My keyboard is not recognized by windows because that is malfuncioned or something else, that's what I get a message when I insert the keyboard to the usb port that could do because the ports are fine.

  Original title: keyboard problem

  Hi Caragata,

  Perform the steps from the link below and see if it works.

  Tips for solving problems of USB devices

  Note: This article also applies to Windows 7. If the fix it does not work, you can then run the built-in utility.

  Good day!

• iPod 4th generation not recognized when connected to a USB port.

  Original title: question

  When I connect my ipod 4th generation in the usb port a message out saying that it recognizes not it. I tried everything and it still refuses to recognize my ipod. What should I do?

  Hello

  Check with iPod Support and Forums for more information if necessary.

  -IPod support
  http://www.Apple.com/support/iPod/

  iTunes and iPod Support
  http://www.Apple.com/support/

  Each iPod - iPod help & Technical Support (part 3)
  http://www.EveryiPod.com/iPod-help/index.html

  ---------------------------------------------------------------------

  For most MP3 players that can and will be able to be synced to WMP - iPod syncs not natively for Windows.

  Set the MP3 MTP Mode for WMP sync - mode MSC to treat the MP3 as a reader.
  (Now its set to MSC)<-- this="" is="" for="" mp3="" in="" general="" and="" ipod="" will="" not="" usually="">

  Your MP3 player should have 2 settings - MSC which should allow the player to be used as an external symbol
  drive and PSG that is the parameter to use to sync with WMP. Remove the MP3 and charge it the
  computer. Change the MP3 in MTP mode - it power off and plug it in.

  ======================================

  There is a plugin to let WMP sync music to an iPod:
  http://thewelltemperedcomputer.com/SW/WMP/sync.htm.------

  WinAmp supports iPod
  http://www.Winamp.com/

  How to use Winamp to manage your iPod
  http://www.SimpleHelp.NET/2007/07/07/how-to-use-Winamp-to-manage-your-iPod/

  WinAmp - Forums
  http://forums.Winamp.com/

  6 ways to synchronize your iPod to computer without iTunes
  http://www.MakeUseOf.com/tag/6-ways-sync-iPod-computer-iTunes/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• GPIB has not detected when connected to the internet

  Hello

  I have keysight power supply connected to the PXI-8880 via GPIB, it does not detect when it is connected to the internet & it was detected when its not connected. Any body can help me to solve this problem.

  Hello

  This problem occurs because of a conflict in present multiple network adapters in the system. It was a question that has used for detection of targets ethernet to the system that has been resolved. But then this question has also resolved to do the same thing. You can follow the link on how to change the order of the present network adapters in the system.

  http://digital.NI.com/public.nsf/allkb/FD9E1AF5AB1343098625736F0076DE6B

  You must also make sure that the IP addresses of the network adapters are different, otherwise conflict can happen also.

• Class not registered when connecting to the Express Edition

  
  On my laptop I was able to install the 11.2.0.2.1 XE and Developer SQL 4.0.1.

  TNSNAMES. ORA is properly configured, the SQLPlus and SQL Developer therefore have access to the database, I can create tablespaces, users, tables, etc. SQLDeveloper connects using the TNSNAMES file. ORA.

  XE =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP) (HOST = PORTLEKU)(PORT = 1521))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = XE)
  )
  )

  FITTING_SERVICE =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP) (HOST = PORTLEKU)(PORT = 1521))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = XE)
  )
  )

  However, when I run my application program, "Fitting.EXE", it gives me a 'Class not registered' error message when I run Connection.DoConnect.

  The connection string is configured to connect through OLE DB, use Fitting_Service as data source. This is known to work, such that the program works correctly on my desktop PC that is running Oracle 10 g with OLE DB and is used to compile and link the executable file (the laptop has no software development).

  My first thoughts on this problem are:

  (1) I need ODAC on the laptop. But that creates a new home of the Oracle, is not?  So if I set up the TNSNAMES file. ORA in this new folder tree, how it can reach the server database on the same PC, a server that already has a listener configured and known to work as SQLDeveloper can see the database. There is already a TNSNAMES file. ORA files in the tree of files server and properly configured. If I install a new listener, don't he substitute somehow the existing one, may break the connection that uses SQLDeveloper?

  (2) the program Fitting.EXE has been linked on a system with 10 g and the corresponding OLE DB software. Perhaps it is impossible to connect to an 11g database, either by an OLE DB 11g if I install it to ODAC 11.2.0.2.1? I have not yet tried ODAC installation because I was afraid to disturb something that works - see already 1) above.

  As you can probably guess, I'm a little lost on this and need someone to point me in the right direction instead of groping in the dark.

  --

  JF

  Success, finally!

  Take your index on copying tnsnames alias in the client tnsnames file, I installed ODAC112021 and did just that. It works amazingly!

  Problem solved. Thank you.

  Plomong

• the music does not work when connected to the internet

  While my ipod as we connected to the internet, I can not play any music, it only put in place a picture with music on it. I don't really know yet how to explain this

  Nevermind, he just buggy upward and has no shiw the button continue

• Web page does not appear when connected to the internet

  I have an older Dell Inspiron I try to connect to the internet.  When I connect it to a wireless or ethernet card in my desktop, I get a message that says that I seem to be connected to the internet, but it cannot display this Web page.  Any help would be appreciated.  Thank you.

  check this

  http://support.Microsoft.com/kb/956196

• By getting Unattended.XML file not recognized when booting from the USB key dvd

  I have prepared without supervision. XML file and put it in the root of the USB stick and kept Windows 7 OEM DVD player. Mentioned the path of the file catalog in unattended mode. XML. active all USB ports in the BIOS settings. But without surveillance. XML file is not acknowledged at the start. What could be the possible problem here? Can someone help out me?

  Hello

  Please contact the Microsoft community.

  I suggest you to send your request in the TechNet forums to get the problem resolved.

  Please visit the link below to send your query in the TechNet forums:

  https://social.technet.Microsoft.com/forums/Windows/en-us/82410df7-2e70-47C7-a9dc-7dba7c17fbf8/autounattendxml-will-not-load-from-USB-HDD?Forum=w7itproinstall

  Hope this information is useful. Please come back to write to us if you need more help, we will be happy to help you.

• iPhone is not syncing when connected to the macbook.

  My iPhone is not connecting to iTunes and when I hook it up to my MacBook Air and maintains a load beep.

  I would like to try a different cable or usb port

  If she has always been the case then I suspect the connector in the iPhone to be vice or have some Lint and dirt inside

• iPhone 6 charge when plugged into computer USB and not an ankle... Help

  Ive tried different cables as well as my friends phones... All phones except my fees on the wall units and the computer USB... Mine will load only on the computer USB... Suggestion? Help?

  What IOS version you are using and you are using an Apple cable loading?

• Z10 Z10 blackBerry will not charge when plugged in the beginning

  Hello, I load problems my Z10. When I plug it in to charge initially lightning does not appear and it does not load. Even after 5 minutes of waiting. The only way to load is to unplug and then plug back in again. Everyone knows about this problem? My phone is defective? I'm worried because it is new and if there is a problem, I would like to that it be supported until I can't replace...

  I use the blackberry USB cable and charger. I also tried other USB cables, but it has not remedied the situation.

  It is not a problem with your charger.  This can happen when the charger is plugged slowly on the phone.   Currently, it causes the charger detected being wrong.

  KB33636