IR materials

Similar Questions

• Fixing of materials more

  Hello.  I can't add more than 5 documents to a post.  Which is the limit?

  I think you mean attach materials to assignments and help:

  Attach materials to a position assignment

  ... "Repeat steps 3 through 4 to attach up to five materials".

  So yes, the limit seems to be five.

• HP Envy 700-327C: walk of recovery materials (D); What would they

  Believe it is 64 bit, but not sure if that makes a difference. It's Windows 10

  Content of the recovery disc (D) seems to be ALL the files that are located on drive C with the exception of the info Office more a section marked or named "Recovery". Is it the way it is supposed to be?

  The reason why I ask this is that I saw a question in a forum of Support HP indicating "Recovery Drive Full - new HP Envy Windows 10" and the answer was - "If your recovery disk is displayed as having a drive letter, which could be the source of the problem, as there may be a default download setting (as in a browser you use) which writes that animate its temporary files instead of disk. OS. " Then there were know get into disk management to see if the volume of recovery has a drive letter (D) and if so, how to erase it.

  My d drive recovery - is not complete; It shows 1.89 GB free of 15.4 GB - (I'm not sure of what he showed when the PC has been implemented) and, as noted above, has all the files that are located on drive C with the exception of office. When I go to disk management the recovery volume shows the drive letter D. So delete it or not? Must drive D materials reproduce what's on drive C as described. Delete "D" drive Mgmt will create problems?

  Thanks for yoour help

  @OPAMA, welcome to the forum.

  The D: partition is only recovery files.  There should be no other data on it.  However, that said, if you did the recovery media when you bought the computer and are positive that it works, you can delete the D: partition.  Normally I leave just to be sure.  Is the best solution to your problem, check which drive is when you save the data.  In addition, you can remove all the data that are the same as on the C: drive.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• With GarageBand music itself inside the material and sound materials makes new music

  With GarageBand music itself inside the material and sound materials makes new music

  This kind of music can be put in the game when the background music

  I don't know about this

  Y at - it friends who know say me thank you very much

• my app store on my 6plus does not work... not load materials... Help, please

  my app store on my 6plus does not work... not load materials... Help, please

  Turn off your device and turn it on again. If this does not help, sign out of your account and reconnect.

  In addition, you can try to reset your settings.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

  https://support.Apple.com/en-us/HT201559

• Reactance frequency-dependent in the definitions of materials

  I'm trying to run a simulation for a material with a reactance frequency-dependent. However, when I try to enter a variable for the frequency in the definition of material I receive the following errors:

  Global definitions
  21:50:04 frq - error of the equation: Variable not found '_FREQ '.
  Structure of EM 1
  21:50:04 STACKUP. SUB: Error evaluating the 'React' parameter (error of the equation: Variable "frq" is not valid). (Click Help.)

  In the global definitions and schemas, I tried setting a suggested for such frequency variable in the examples by assigning frq<_FREQ. i="" also="" created="" an="" equation="" to="" use="" for="" the="" reactance,="" ex. ="" x(f)="(2*_PI*f)." i="" then="" entered="" x(frq)="" for="" the="" reactance="" in="" the="" impedance="" defintion="" of="" the="" material="" defs="" tab="" of="" the="" enclosure="" properties.="" these="" simulations="" were="" attempted="" using="">

  Any help would be greatly appreciated.

  There are a few possibilities to condition some materials for AXIEM frequencies.

  Please see the attached project.   Output equations write a few equations and are drawn to help define the equations.  the STACKUP does NOT use these it is just for debugging purposes.

  For some settings, you can enter a frequency dependence, this example is it for Er and TanD.

  I don't know exactly which parameter you want to make dependent on frequency, I'm sure that you can set the type for the ResSQ and react.

  This should get you.

• Digital potentiometer through materials

  Does anyone have a quick reference to material that contains a digital pot? Is there material that does this?  Can you create a digital pot through materials?

  Thank you.

  Hello Jonathanupr,

  I did some research for digital pots we sell and the only one I found was this one. The series 5b on the modules we have created this work on this aircraft back created by Analog devices.

  Also, what are you going to use the digital pot for? If you try a current relatively low output voltages, you may want to consider a DAQ with analog outputs on this card. If you are looking for a high current, you can always implement this with a unity gain op amp boost up the power from another source.

• on materials

  
  

  The plastics used for portable electronic devices may vary, but in general, you will see the ABS, acrylic of different kinds and smaller amounts of polyethylene, polypropylene, (especially in the internal components).  Because of the requirements of the RoHS, weld without lead and other alternatives (mechanical linkages) are used.  PVC has kind of favour fell on these days too.

  The billboards will use glass internally, of course.

  The beauty of small portable devices, is that in the past, we did a lot of larger machines.  The raw materials for an individual player is only a fraction of what will be needed for a single device.  No vacuum tubes and transmitters of thorium, filled with oil in transformers and large masses of resin and other.

  It is a pity that GENIUS ELECTRIC feel a bit of an art lost in American universities, like making all too often abroad.  This equation is simple enough for the "majors" to understand.

  Bob

• Training materials

  Can anyone recommend the training materials available commercially for FB 4.6?  I would like to purchase something similar to the Bible of Dreamweaver CS5.5 insofar as a training manual "soup to nuts".  I'm not a professional programmer just an enthusiastic amateur.

  Awesome!  Thanks a lot for your comments.

• My taskbar? (at the bottom of the screen) and all materials-clock, battery, etc. from start menu, a completely frozen. Pleeez HEEELP!

  Hey there, at 7.52 pm (3 hours), my taskbar? (at the bottom of the screen) and all materials-clock, battery, etc. from start menu, completely frozen.

  The cursor does absolutely nothing when you click on it. Heeeeelp Pleeeez!
  Thank you, Nat

  Given that this problem is only a few hours ago, please do a system restore.

  Choose a date where you did NOT have this problem as your restore point.

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  You can give alco, this method a try...
  Restore explorer.exe

  Press CTRL + Alt + Delete... Task Manager... Processes tab... Right-click on explorer.exe... click on end process... Applications tab... New task... in the Open box, type explorer.exe ... OK when finished.

• Whenever I try to place materials on the House, these materials is placed on the grassy areas. Punch said update my chipset, but I have problems doing that.

  Meeting of the problems with my Punch home and landscape design V17.  Whenever I try to place materials on the House, these materials is placed on the grassy areas.  Punch said update my chipset, but I have problems doing that.  I have Intel (R) g33/g31 Chipset family 8.15.10.1825.  I'm looking for a place to download the latest updates for this system of video card.

  Go to the web site of the manufacturer of your computer.  They should have all the correct drivers for your computer brand and model.  Don't download them from any other place because who could cause problems.

  Good luck.

• To access the resources on composite materials

  Hello

  I have a few projects of BPEL and some XSL files are used in composite materials. Is there a way I can do a joint project and access the xsl and xquery in composites and OSB. Ora using: processXSLT and ora: processXQuery, can I access the xsl/xquery in other composite. I am aware that this can be done through MDS, but given the time, is it possible that this can be achieved without MDS

  Thank you

  soa05

  You can see the XSLT files via the HTTP URL inside the composite in these functions.

  I used something like below a few years ago... We had a simple web project that had all the transformations XSLT, accessible via the http URL. These URLS have been targeted in the transformation functions.

  ORA: doXSLTransformForDoc (http://serrver:8001/XSLTFiles/otm/XFormPorts.xsl, $Receive_1_Read_InputVariable.part1)

• Are all materials and videos will be removed after July 13?

  Hello

  I would like to know if material of the entire lessons (videos, tutorials, homework, ecc.) is removed in the pages of course after the date limit of the quiz (13 July).

  It would be awesome to be accessible in the future for the pursuit of learning.

  Thanks in advance and congratulations for this amazing course.

  Concerning

  Pietro

  Hi Pietro.

  No materials will be open to the public and remain on OLL - about 2 weeks after the end of the race.

  Tom

• Materials available during the review of the VCAP-DCA

  Hi guys,.

  Who will be my VCAP-DCA exam at the end of the month.

  I was reviewing notes and format of the DCA, and it is not clear what materials are available to the candidate during the examination.

  Are functions online help or the documents available to the candidate during the DCA?

  Or do we have to memorize all the menu items and orders for this review?

  Thank you
  Kelvin

  You will have access to all the functions of built-in help of interfaces and the different tools and documentation that refers to the action plan.

  But, time is tight and you have to rely on access to these things as little as possible - in the best position to be in is not not to refer to the documentation/help at all.

  I did DCA on vSphere 4 and the same is true for this - I haven't used documentation for a couple of tasks and should make reference to the CLI help a few times - screen strive to keep that to a minimum.

• A query to get the values of the batch % off tab Formulation of incoming materials.

  Does anyone have a request that they would like to share to get the % batch out of the tab of the formulation of specifications of Formulation of incoming materials? Thank you!

  David

  I believe you can find this on the table of gsmFormulationInputs, using the percentBatchFactor column (* 100), while the percentage of step is PercentStepFactor.

  Is that what you are looking for?

• the difference between the intermediate process and materials first in BCP formulation?

  I do not understand the difference between the intermediate process and materials first in BCP formulation. could you give me an example to show the difference?

  The intermediate process - questions all the specifications that are used in the

  current specification.

  Raw - questioned the level of material first in the hierarchy.

  Hello Terry,

  It is used in the screen output Formulation based PCA. You can configure different PCA rule which is available in formulating exit point BOM, then when you start a screen of PCA in the base of the exit, you will see this rule.

  And the difference between the intermediate process and raw in PCA, let me explain with an example, I have a configuration hierarchy as below:

  OutputA

  A formulation

  Material X

  Output B

  Formula B

  Material M

  Material N

  If I select the output B in formulating A framework, and when I run a screen of PCA in the base of the output, I have three options:

  High level - it allows to extract A output attributes as PCA review the settings;

  Intermediate processes - it to retrieve attributes material X and B output like BCP review the settings;

  Raw - it will extract attributes of material X, output B, M and N of material material as PCA review the settings.

  I hope this helps.

  Thank you

  Jessie