Training materials

Similar Questions

• Why VMWare is not to update their training materials?

  Hello

  I noticed that VMWare training materials do not conform to the version of vSphere product lates, but reviews are on the latest vSphere product!

  I attend new courses, upgrade to VCP4 VCP3. While I'm looking and reading, I saw most of the blogers and in the VMWare community, they recommend to prepare for the exam with the final documentation produced...

  So, if the review is based on the latest version of the product, why the Materils training always focus on version 4.0? Should not be the latest version. !!

  Thank you

  S.Hussain

  As I said, it is normally "latest version as the course is released", to give you a few examples, What's New is based on 4.0, Performance management and troubleshooting based on the 4.0 Update 1, install configure manage comes from the 4.1.

• Yet another question about VCP, training materials

  Hi guys,.

  I'm sure you asked this several times, but I hear that the best study materials are unique to VMware .pdf but who exactly those? There are thousands!

  I would be correct in saying the .pdf is available for download on this page would be a good starting point?

  http://www.VMware.com/support/pubs/vi_pages/vi_pubs_35.html

  I just finished CBT of Elia Khnaser (very good) and also bought the VCP Exam Cram book which I'll go through once my knowledge base is preferable.

  Reserved (e) to participate in the day 4 training this month, but seeks to focus on the good material so far here. If you know of any other material which is good please let me know.

  Not interested in brain shocks - the reason for the test is if it forces me to learn the in-depth product!

  -Is it possible to book your exam prior to attending the training and the calendar for after training?

  Thanks in advance for your answers.

  Matt MC

  Yes - URL is the place for the PDF files, you will need to study for and yes it is possible to book your exam before taking the class.

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• under condition of read/write terminals on the side of the connector (basic training 3)

  Hello

  During my practice towards the review of the CLD, I examine the Core 3 online training material too. I just read a few tips of 'best practices' on the forum, for example this post:

  http://forums.NI.com/T5/LabVIEW/Community-Nugget-wired-terminals-in-subdiagrams-clearing-up-the/m-p/...

  It should be noted, that we should not use terminals (which are on the connector pane) to the inside of while loop or condition of the structure. Neither control, nor indicators (read/write terminals): "terminals conditionally read or written on the side of the connector are BAD!"

  I can find many examples in the online training materials, when the indicators and controls are placed inside while loop and the case of structures in a Subvi.

  I guess I should not do this during my review of the CLD, as they will run benchmark on my project? Should not be the core training materials updated some time? Or it's just not too important to have terminals on the outside? I would lose points during the CLD Exam my project as in the Core 3 screws?

  example 1: Core 3, exercise 4-6 design of an error-handling strategy:

  

  EDIT:

  What's even more ugly in this project, is that, in the case of 'Get empty Cue', the Cue output indicator is updated via a local variable, because the indicator is not accessible via 'outside ': wire

  

  Nice catch on the training material.  that the application would take an if subject to a review of the CLD test graders.

  As noted in the nugget: sentencing of perfomance for conditionally reached terminals is a function of the size of the data.  So, it is sometimes acceptable for simple data.  The larger point being to learn about compromise and make the right choice for your code.

  Preping for the CLD on other means of hand knowing that VI Analyzer will run on your project.  Like any other code review you walk in - know the guidelines for the review and code to ' review ' as well as 'reply spec.'

  I've not seen an instance where an example of shipping (2013 and later versions) would fail this test VIA (there are a few screws deep inside the vi.lib which can date back to before the adoption of this recommendation from style)

• management reporter user guide located in the section of training and preparation

  I try not to locate the following documentation of management journalist who is a download of CustomerSource by accessing the State of preparation and training section to training materials, on the left side of the screen.  From there, click on the menu down and select Management Reporter from the product list.  The title of the publication is to report in Microsoft Office PerformancePoint 2007 Management Reporter design, PP001 course number.

  Can you help me get this file?

  Luca

  Hello

  You need to contact support for the site where the download is available,

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• LabView hangs after displaying a pop-up window

  With my Test.vi I start a Subvi (Test1.vi). These two screws are set below. When you press the Start in Test.vi button a popup window is started via
  Test1.VI. can I close this pop-up window with an OK button. The 1st time it works fine. By pressing Start and the time of 2nd OK button causes all LabView hang. It can only
  be arrested by the Task Manager. I'm using LabView 2014.
  Software details: Version of LabView 2014 (free entry)

  What you do doesn't make too much sense. You do a lot of programmatic errors. You should learn how to properly use the Structures of the event (through the Core 1 and 2 training materials). You should put controls (action buttons, control Boolean OK) associated with a case of event in the event company. Moreover, the reason why your grip VI: in your Subvi you close the front panel of your VI via the property node, but it will still be running, you do not set a mechanism to stop the VI.

  

  Did you watch a few appropriate screws coming with LabVIEW examples? Go to file--> new...--> a UI event handler. Open it and watch how it works...

  

• BSOD on install of Windows 7 after hard drive crash

  I have a HP Dv7 with Intel i7 and 8 GB memory. About 3 years.

  Recently, I lost my hard drive to a physical failure. I bought a 120 GB SSD as the principal and a 1 TB drive 7200 RPM as the secondary to be replaced. I ordered the HP restore kit to reinstall Windows 7, but each installation stops at "loading drivers" step and gives me a BSOD. I tried to remove the SSD drive and using only the hard drive, but the same results. Also tried to do a clean install of Windows 7 with an ISO image to a bootable USB key. The same problem. I also tried swapping the primary/secondary locations for readers.

  Nothing I have tried seems to work. I'm desperate for a solution! Why would I get a BSOD on a reinstallation of the software factory?

  I am trying install Windows 7 without SP1 to see if that works, but have no chance. What else can I try? What I have to install Windows 8 to work with the new hard drive or SSD? »

  I tried to restore 4 times (3 hours + per attempt). I tried the clean install of Windows 7 SP1 at least 10 times, each of them do not reach the exact spot. Windows won't INSTALL, so that steps can be taken?

  As I posted earlier, I had problems with installing Windows 7 on my laptop HP Pavilion Dv7 after replacing a hard drive defective. I ordered the kit of training materials ($60) and the operating system of restoration kit (essentially Windows 7 and drivers) on a 4 disc set. I paid the extra money for all accelerated for me.

  After you have installed a 120 GB SSD and the new 1 TB drive 7200 RPM, I tried to install the operating system using the DVD restore I ordered. Each installation took about 4 hours and each of the 3 times (i.e. 12 hours!) installation has failed at the end of the installation process. Then I downloaded a clean version of Windows 7 ISO and burned a bootable USB an attempt installs another 15, which also failed at the end of the installation process.

  In desperation, I contacted HP support and was informed that I had to pay for technical support. I must say that I was really disappointed by HP and HP «each incident» support I spent $59 and 3 hours talk with some idiots in the new Delhli, who accompanied me through a few tests of BIOS of base no matter what 3-year-old could have understood, I sent them a picture of the BSOD and error code, and they arrived at their 'solution' to send me my laptop to HP for them to install a new hard drive and reinstall the operating system for the pittance of $200 and 7 to 9 days!

  I refused their generous offer to relieve myself of the burden of $ 200 in my wallet and took the laptop to Fry when I bought it. After 15 minutes of discussion about my question, the tech told me that I needed to install the Intel drivers during the installation of Windows 7. He popped a USB key containing the Intel drivers, I've needed, continued with the installation of Windows 7, and I was back at home with a working machine within the hour. It cost me $35. A BARGAIN, given that HP, the company that BUILT my laptop was completely distraught about this problem and the only solution was to deprive me of my laptop for 9 days and during this time, charge me $200.

  So to all who read this, please pay NOT for the HP "per incident" support. They are slightly educated idiots who know no more about the HP product than your typical 3 yr old child. For example, they suggested that the HP laptop in my possession was "very sensitive" and I wouldn't be able to put 'any hard disk that was not exactly to the same specification as that was in it from the factory'.  Idiots.

  I you need to re - install Windows 7 on your laptop, visit the Intel website and download "floppy" (i.e. not the executable versions which self install) versions of their drivers for your laptop, load on a USB stick and when begins the installation of Windows 7 where it asks if you want to load the drivers, select the drivers on your USB key and installation will be smooth.

  Again, how is it possible that HP and their support forums are not aware of the problem or the solution? Seriously. This is probably the last HP I buy. Just exhausting and annoying to deal with this.

  Craig

  PS - My HP Pavillion DV7 is smoking quickly with the new solid-state drive and updated 7200 RPM secondary drive. * beep * thing boots like 20 seconds and Photoshop load almost INSTANTLY. Incredible.

• Wink IMAQdx framework

  Community salvation OR,.

  Question 1:

  I want a VI that takes a picture of the camera when I hit the Boolean value and keeps it for later use. When I start my VI it does not show a picture when I run mode to run culminating it works very well. I've also attached the VI if you want to try it.

  

  Question 2:

  In the end, I want a VI that captures the 5 different images using different Boolean 5. I was looking for a structure with 6 cases (do nothing + 5 capture image case) when I hit one of the Boolean values. I couldn't find a (structure of the event and conditional turn off structure seems intresting, but I could not understand how to use them, it is still possible). So my simple solution was to copy the structure of business 5 times. That would work no doubt, but not not seem a clean solution (what happens if I want to capture 30 frames).

  Kind regards

  Ruts

  Hello ruts.

  I made a little adjustment to your code.
  It is not yet optimal performance wise, but it should give you at least one output.

  Please note that you must have some features of waiting in your loop and try to keep your outside the loop (if possible) initialization code.

  Can you test and let me know if problem 1 is resolved?

  Regarding question 2:
  -Do you have previous experience with LabVIEW?
  If Yes, what have you tried already?

  -Have you taken classes (1 Core, Core 2,...)?

  You have access to online training materials?
  If you do, then a good starting point to know the structures of the event and other things is the next page:
  https://lumen.NI.com/nicif/us/LMS_LOGIN/content.XHTML?du=http%3A%2f%2Fsine.NI.com%3A80%2Fmyni%2Fself...

  -Are in the image of the camera even?
  How should they be displayed for the user?

  Side question:
  For what will be used this acquisition in the end?

  Probably the best way to start would be a kind of event-driven state machine who acquires different images.

  The attached Code is provided as is.  It has not been tested or validated as a product for use in a deployed application or system, or for use in dangerous environments.  You assume all risk for use of the Code and the use of the Code is subject to the license terms of Sample Code which can be found at:

  http://NI.com/samplecodelicense

• Windows Media Player no longer recognizes the music in my library

  I have a lot of music in my library and several training material files.  As of the last month, the music will not play.  I click on it, and she travels about 6 songs, puts a red x next to each and answers media cannot be played.  training materials actually play fine.   Used to play music, and I don't quite know what I changed, although there was a day where Microsoft updated a lot of things and my computer has been updated for probably 45 minutes.  This seems to be on the time where this has happened, even if it could be a coincidence.  WMP is passed to a new version that does not recognize the old hardware?  Thank you

  This happens usually when you move or rename the files.

  To get media player to play yet MP point to them.

  MP open, click file on the menu, click Open and navigate to the file.

  Click on the file or Playlist, click Open.

  If you click on a playlist to re-record it to the new location.

  Click file, click, save now playing list as, click, save and overwrite the file.

• We want to give you what you want

  What items of specific topics / you want to know more on our online training team and what format you want it to be delivered? (Examples: Web demo, recorded training session, bridge of PowerPoint, video training)

  1. how to solve the network connections at home (file sharing problems, search for computers on the network, share printers, etc..)

  2. reformatting readers/clean installation of OS in a new SSD.

  3 overclocking via BIOS (1333 mhz-online 1866 mhz) memory

  4. keep bloatware lean system.

  5. how to configure the automatic data backup using the dedicated external HARD disk.

  6 PC owner maintenance (cleaning of the dust/debris, upgrading memory, ports installation SSD, maybe add thermal paste, etc.).

  7. how to catch up with the latest drivers (video drivers, TSRI firmwares, SSD/HDD, chipset, etc.)

  All training materials must be in video format w / downloadable instructions. Make downloadable video as well for easy reference.

• Uninstall messaging

  The training materials for the Surface are so bad I want to just start the process of email configuration. I don't see any option to delete accounts and it's the only way I can think to do this thing works properly. Help/training/tutorial information is unnecessary. Microsoft, you have disappointed me. I looked forward to many more.

  To uninstall the application Mail - click Start and search for messages.

  Where is found, slide down on mail in the search results and click on uninstall.

  Once uninstalled, you can reinstall it on the Store (the name of the application is Mail, calendar, people, and e-mail).

  If you have any questions Mail, take a look at this page of Windows:

  http://Windows.Microsoft.com/en-us/Windows-8/mail-FAQ

  Hope this helps,

  Kate

• Unable to load WSDL in Jdeveloper/SOA BPEL

  Hi all

  In the last month, I went through the composite application Oracle SOA to build in house training. In training that oracle handed training materials in class. After completing the training, I set up the /Weblogic of the SOA and the Jdev on my own machine, and I was going through the documentation of classroom training for practice. In Chapter 7.2 training document where to import the local machine's ".wsdl" file to the BPEL process. But when I try to follow the step that jdev survey and the error message.

  Can someone help get rid of this error message. I'm new to JDEV, SOA and BPEL in order to ask that you explain the solution in detail if Possible.

  Thank you

  Vijay

  WSDL is trying to find the xsd to 'C:\Lab\files\wsdl\xsd', while your xsd is actually located at C:\Lab\files\xsd.

  "Use schemaLocation ="... /XSD/storeinfo.xsd"

• Subject disappears in printe documentation

  I create a training materials that will be printed. I've added a new topic for my project and generated in my main layout (web help) and the subject was there. But when I generated the project as printed documentation is not the subject. Help! : ()

  When you generate your printed documents, on the second screen, you will need to add new topics to the left side on the right side. I usually just remove everything from the right to the left and then add everything to the left to the right.

• Commercial use?

  If I buy a standard Adobe Stock license, am I too then allowed to illustrate training materials with illustrations from Adobe Stock and sell materials in primary schools to the Denmark and private clients?

  Hello

  Please see the frequently asked questions, Adobe Stock

  You can also check using Adobe Stock

  Hope that helps!

  Kind regards

  Sheena

• How can I learn FrameMaker?

  Can anyone recommend materials such as books, videos, or web for learning FrameMaker tutorials that are intended for beginners?

  The only book on FrameMaker, I could find on Amazon is published in the last two years is intended to be a reference for experienced users of FrameMaker. Everything on the site of Adobe seems to be on very precise FrameMaker, present topics, in no particular order, and there is an overview of the new features, but nothing to guide a new user. The last classroom in a book on FrameMaker is for Version 11. I tend to get a copy of that, but I don't know how can be lack of it.

  In case it is useful, my situation is that I'm interested in a career change to become a technical writer and I finished a certificate program in technical writing at the local Community College, but he had no exposure to FrameMaker in this series.

  Thanks in advance for your suggestions.

  Andy

  See also: Adobe FrameMaker appears to be a very difficult program to learn. Should I buy?

  For all those who want to add FM to their portfolio of skills, training materials and manuals on older versions on paper collection has some value, and you can often find this material cheaply on eBay and sellers of second-hand books.

  Not every shop is on the current version of FM. I recently took his retirement from that always used FM7.1/Unix and FM6/Unix for the major part of its production. In all cases, a port of entry is very likely to result in the maintenance of existing documents, perhaps in a heritage FM.

  The usage model will also vary widely, with shops put emphasis on one of (but without limitation):

  • Unstructured FM
  • Structured FM
  • workflow in Postscript for printing
  • workflow in PDF format (historically most likely)
  • workflow (more) to HTML, XML or ebook
  • FM as part of a build system automated documents focus on the DB in real time