Is IOS 9.3.2 update cause any problem on my phone?

Similar Questions

• Windows Update Causes startup problem

  I have an interesting problem with Windows Update (or apparently is from Windows Update). I am running Windows Vista Ultimate 32-bit, if that info is needed. There are two updates I have not install, as I am not sure that is the cause. The updates in question are Internet Explorer 8 and Windows Defender definitions 1.63.604.0. Here's what's happening.

  When you restart after Windows updates, the computer starts with a black screen with a mouse pointer. That's all. Happened every time I tried to start after the pdates. I can reboot into SafeMode very well, is apparently a problem driver or update.

  I also installed DivX on the computer, but it seemed to work as I could watch .avi via WMP thereafter, so I excluded. I thought that if there was a problem with it, it would not have worked in the first place, but I thought it was interesting.

  In any case, the only solution I found doing a system restore and do not install updates day or DivX, since technically I don't know which is the cause. I had to restore the system 3 times already and I didn't continue to do because this computer was very expensive and I don't want to ruin the hardware or something.

  Someone knows something about an error with updates, or perhaps with DivX that may have caused this. The computer works fine without the updates or DivX, I just want to know what could be the real problem so if it is only one of the 3, I can install the other two at least.

  Change your update settings, install the updates one at a time, hide the problem:

  Click Start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  See you soon.

  Mick Murphy - Microsoft partner

• Windows Update causing various problem on the computer

  Original title: bad update?

  11/10, I downloaded and installed updates Vista KB2641690, KB2492386, KB972971644, KB2505189. There is more, but this format makes it very difficult to enumerate. My computer is now constantly lock up, and various closed functions (Explorer being the worst).

  My computer works horribly since the update. Is there a way to reverse the updates, or should I use a fixed disc and just pray that I don't have reinstall?
  THX

  Hello

  Method 1: I suggest you to restore the computer to a point in the update got installed then install the update one at a time to determine the cause of the problem is updated:

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Method 2: You can try to install the updates to the clean boot in order to verify if any third-party application is causing the problem:

  http://support.Microsoft.com/kb/929135

  Note: after a repair, be sure to configure the computer to start as usual as mentioned in step 7 in the above article.

  Method 3: Try a manual install of update by downloading the update from the Microsoft Download Center:

  http://www.Microsoft.com/download/en/default.aspx

  Note: the number of the KB article in the search box to search for the update.

  Reference: the problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

• WIn Vista for 13/12/11 updates cause startup problem

  Hello

  There was some 16 published "Windows Updates" yesterday.   After applying my Vista system would not restart until they have been regularized.

  I don't know which one caused the problem.   I guess I could let the updates from the Office product be applied again to try to limit the update at the origin of the problem.

  But do you know what is wrong?

  Larry

  Hi LarryMcMahon,

  Download the latest driver chipset directly from the manufacturer. If Windows was preinstalled on your computer, you can find the driver on the website of the manufacturer of the computer.

• Update causing error problem"ssing or 32\DRIVERS\pci.sys corrupt system"

  Original title: update the problem cause

  After updating major on XP, cannot restart. Emergency start screen goes to "missing or damaged system 32\DRIVERS\pci.sys. How can I move from this screen to allow the use of the Windows CD-ROM to allow the repair to activate? Help gratefully received.

  PCI.sys error when Windows starts

  Problems with damaged or Incompatible hardware with Windows XP
  http://support.Microsoft.com/?kbid=330181

  Windows could not start because the following file is missing or corrupt:
  System32\DRIVERS\pci.sys
  Setupdd.sys could not be loaded. Error code 4.
  -or-
  Setupdd.sys could not be loaded. Error code 7.

  When you start Windows, you may receive an error similar to:
  File is missing or corrupt: C:\Winnt\System32\Drivers\Pci.sys

  To restore the file, perform an upgrade on the spot or expand the file from the Recovery Console:
  1. start the Recovery Console.
  2 select the installation that you want to access.
  3 enter the administrator password.
  4 entry card to determine the drive letter assigned to the CD-ROM.
  5 type: Expand, CD-ROM drive>: \i386\pci.sy_ c:\Winnt\System32\drivers/y.
  You should receive:
  PCI.sys
  1 file (s) expanded.
  6 type exit to complete the Recovery Console.

  Install and use the Recovery Console in Windows XP
  http://support.Microsoft.com/kb/307654

  The above is my notes on Windows XP - no guarantee

• My time will not be updated, causing various problems on all kinds of things on my computer.

  It began with my time do not update automatically. When I go to the tab "internet time" to connect and update, he needs an administrator to fix it and even though I am the administrator, it won't let me, but that's another issue all together. I have fixed this before going to msconfig comand prompt and then cancellation of the registration on the server time and re-registration. This fixed for about a month, but his pass yet. I've updated to implement everything and searched tons of forums and convenience stores without getting an answer I've already tried. Help, please! I'm very limited in what I can do because of this.

  Wow, the loss of time

• Windows Update Cause shutdown problem? [was: Win 7 Professional]

  Under Win7 Pro 64-bit Acer Last nite my mouse froze and I was not able to turn off the laptop. I disabled manually and I tried restarting and screen that says Win does not close properly, two options were given allow windos fix this and start earning normally. I chose an and still no start, then I choose the other (after turning it off again) and still no rebbot.

  The beginning of victory just hanged. I could then by going to F8 to get into the Safe Mode and access to a chess program that has worked well, but I obviously didn't have Internet and my anti0 virus does not. Then I tried to boot into safe mode with network and allowed me to access the net, but with my antivirus doesn't work do not. I tried restoring the system several times and got little results. Tonite while I ran this prograam of chess (not a new or recent installation of the software) and it closed and I tried to reboot and presto! My laptopseems do return to normal. Then I had Win Update telling me that I have 11 new updates that I write this are download and beinf installed. Someone told me that MS had problem this week with updates. Can anyone confirm this?

  Hello

  Thanks for posting your query to the Microsoft forum. I will definitely help you with this.

  I appreciate your efforts to try to solve the problem.  This could be due to conflicts during the installation of Windows updates as some optional updates may also be installed.

  Check Windows story update and let us know what Windows Update have been installed recently?

  Let us know if you need more assistance. We will be happy to help you.

  ____________________

  Thank you best regards &,.

  Isha Soni

• Vista updates causing interference day and PC crashing.

  Greetings,

  I have a tiny little problem. It seems that the new updates for Windows Vista has been causing some intolerable freeze and crash my PC. I don't understand quite updates are causing it. How ever I can officially say that BEFORE I updated my machine it worked almost perfect (except for the graphics). I won't be pesmistic, it really worries me. On top of her crashing and freezing. I also noticed a sufficient amount of gain and loss data. I.E. I have several backups of games on pc before I played. but when I'm done with extracting files and remove approximately "20" of them only '13' will do for the recycling bin, so my (OS - operating system) * HDD partition * wins extra/hidden files. I also noticed that my PC has not been suggested to download SP2 from the Auto Update Center. I had to recover this file manually on the microsoft site. Please explain this problem and please not to recommend a re-installation of the operating system... I have already this is plenty of time to do it either.

  Side of a person responding to this hopeful message. because I have problems with my pc could you please send me a response @ (* address email is removed from the privacy *) thank you.  "ACEs".

  You will get the best help for your question of Windows Update in the right Forum; link at the bottom of this answer.

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understanding Windows Update and Extras in Windows Vista at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Windows Update Forum:

  It's updated operating system Vista, upgraded installation and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows Vista update causes applications non - IE to be denied access to the internet

  I have a laptop Lenovo IdeaPad Y510 unfortunately comes with a Windows Vista Home Premium OS that has caused me a lot of problems with conflicts between her and others, package applications, and now I am forced to use my network at home for route information and documents that must move through the internet by sharing them with another computer Windows XP which is also configured exactly as my Lenovo IdeaPad Y510. I look forward to wean myself off of all MS products, possibly other that MS Office, I use a lot and plays always well for me to wire many years and updates/upgrades. Not the same for MS Windows Vista, however. My experience, similar to many other forum users, has been constantly frustrating over the years I've had to deal with it.  I lost a lot of time dealing with problems caused by code errors in the last set of MS Windows Vista updates that made all my package applications that require internet access unusable.

  I contacted the support of Lenovo and support forums for my problem, and they too cannot provide all the answers that address this issue that is causing me to spend much too much time I could use to work at a rate of $65 / hr, so you can see that this is not only an inconvenience.

  Before someone points me to the myriad other similar positions for possible answers, let me say that I probably have alread read it and tried all the suggested actions, without success. I need to REAL answers and REAL support, and I need it NOW.  Also, I don't think I should have to pay for the support which has been made necessary by the negligence of MS to test their updates for compatibility issues with the popular, free package critical applications for the safety of MS OS system of a user, such as AVG Free antivirus, ZoneAlarm Free firewall personal , OR who are competitors for their navigation on the web or by email client applications. I am not now under the other another firewall that MS Vista firewall having had to uninstall my firewall ZoneAlarm Free. I even had one of my other previously compatible and effective anti-malware/spyware apps, AdAware, uninstall Lavasoft. No matter what I did, which was suggested to me by MS resources support or Lenovo support resources, this problem, which began shortly after the last round of all the months of downloads to fix security and facilities, persists and cost me more money in revenue and lost time every day.

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understanding Windows Update and Extras in Windows Vista at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  And for Windows Update problems:

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  You will receive the best help here.

  See you soon.

  Mick Murphy - Microsoft partner

• 82566MM security update causes problem

  I use a network with fixed ip addresses setting and a 300 tinkpad X.

  After installing Intel 82566 MM Gigabit Network Connection update via Windows Update on every reboot

  the default gateway is removed. I can enter it manually in the network settings, but this isn't the way it should work.

  Does anyone have a solution for this?

  Concerning

  Johann

  I'm terribly sorry. Not the NIC driver update caused the problem. The problem came with Vista Service Pack 2.

  I found the following solution and it works now fine again:

  1. open the registry, regedit.exe
  2. go into the path: HKLM/System/CurrentControlSet/Services/Tcpip/parameters/Interfaces.
  3. here you must select the CLSID of your network card when you change the settings. You'll probably recognize it watching the IPAddress value which will have IP address for this adapter.
  4. open the value 'Passerelle_par_defaut' of doubleclicking it. You will see a list of all the bridges that disappeared! (maybe in your case it will be single, in my case it was because of the many test multiple addresses) Most likely, the first line will be empty. I don't know how this little flaw can be a big problem. However, if you manually delete the first empty line, click OK and restart your system, everything should be working again fine.

• Automatic update because of problems with the USB ports.

  After an automatic update this morning at 03:00 October 15, 2010 for windows vista, all my USB ports on my laptop have stopped working. Please advice all solutions to locate the update caused the problem.

  This must be a different problem from what I had so...

  In any case, I uninstalled all updates on vista (as opposed to other programs, office, outlook, etc.) and then reinstalled again and everything works fine now... go figure: /.

• I encountered the problem with the last iOS 9.3.2 update I can't receive call from people, I can call any body, but when l'm calling people any body can ring me just now, I thing the problem where new soft

  I encountered the problem with the last iOS 9.3.2 update I can't receive call from people, but I can call any body, but when l called people any body can ring me only at this time, I think that the problem of the new update. can u check this and answer my question.

  and my phone

  iPhone 6plus

  You see a Crescent Moon at the top of the screen icon? If Yes, disable does not bother to: settings - do not disturb = Off.

• on iPad Mini iOS 9.2.1 update fails due to low memory, even though 57 GB are available

  iOS 9.2.1 update failed due to low memory, although 57 GB was available.

  What is the cause and the fix?

  EN 57 is the size of your storage. There is no iPad with 57 GB of memory (live RAM). Have you tried to hold the home and power buttons until the iPad reboots? Also try double clicking the home button and close any open applications.

• iOS 10 watered iTunes update and picture Capture

  iOS 10 watered iTunes update and picture Capture

  So I have a dear a few applications and functions I always use Snow Leopard on a Mac Pro. Updated my iPhone 6 and iPad 2 Air more iOS 10.0.1 today. Went off without a hitch... to the... I plugged in the desktop...

  Both devices trigger the pop-up asking to "Trust this computer" and iTunes implements that an invalid response was received from the device. By telling the trust doesn't make NO difference, restart the iOS device makes no difference. For wifi connections do not work or the other (iTunes wifi sync).

  Any suggestions before I restore my backup iOS 9? Was going to order a Plus 7 but the upgrade to the new software Mac OS as Mavericks/El Capitan is NOT an option.

  Frustrated in Austin

  So for you iTunes connect to iOS 9.x, you need iTunes 12.x or better that requires OSX 10.8.5 or better.

• Skype or last update causes the disconnection, accidents

  Have used Firefox for several years. Today, I was forced to upgrade to Skype 7.1. Immediately after the installation of Skype, Firefox would be is more to connect to internet or load web pages (tab "connection... ("say forever). Other applications and browsers work fine and there is no interruption to the internet connection of the PC. After about 2-3 minutes of this, Firefox will crash if left alone.

  After that, firefox.exe remains as a process and can never be completed. I try 'end process' and 'End process Tree' in the Manager of tasks without success.

  Firefox remains a task in the Manager of tasks forever, even when the browser window is closed. If I try to re - open Firefox from there, I get the error "Firefox is already running but is not responding". When I click on "Close Firefox", I get a new error message that says: "cannot load your Firefox profile. It may be missing or inaccessible. After that I'm 'OK' of this, I can't do anything else that to restart the computer to get rid of firefox.exe Manager tasks... and then the cycle repeats.

  Not sure if Skype is to blame that Firefox updated itself today. I blame Skype because it was the same Weird hanging in the Task Manager without ever closing until I disabled the video processing in Skype (and due to the suspicious timing).

  I tried clean re - installed, running Firefox with disabled modules and re - install Skype as well. Same behavior in all cases.

  Any suggestions? Note that I am submitting this from another machine.

  This may mean that a loaded program is causing the problem.

  What type of blocking programs do you use?

  Check the programs that are on your computer

  Windows: Start > Control Panel > uninstall programs.
  Mac: Open the folder "Applications".
  Linux: See your user manual.

  Go through the list. If you find something that you do not
  know what it is, use a search on the web.

  The problems of Firefox caused by malicious software {web link}