WIn Vista for 13/12/11 updates cause startup problem

Similar Questions

• Windows Update Causes startup problem

  I have an interesting problem with Windows Update (or apparently is from Windows Update). I am running Windows Vista Ultimate 32-bit, if that info is needed. There are two updates I have not install, as I am not sure that is the cause. The updates in question are Internet Explorer 8 and Windows Defender definitions 1.63.604.0. Here's what's happening.

  When you restart after Windows updates, the computer starts with a black screen with a mouse pointer. That's all. Happened every time I tried to start after the pdates. I can reboot into SafeMode very well, is apparently a problem driver or update.

  I also installed DivX on the computer, but it seemed to work as I could watch .avi via WMP thereafter, so I excluded. I thought that if there was a problem with it, it would not have worked in the first place, but I thought it was interesting.

  In any case, the only solution I found doing a system restore and do not install updates day or DivX, since technically I don't know which is the cause. I had to restore the system 3 times already and I didn't continue to do because this computer was very expensive and I don't want to ruin the hardware or something.

  Someone knows something about an error with updates, or perhaps with DivX that may have caused this. The computer works fine without the updates or DivX, I just want to know what could be the real problem so if it is only one of the 3, I can install the other two at least.

  Change your update settings, install the updates one at a time, hide the problem:

  Click Start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  See you soon.

  Mick Murphy - Microsoft partner

• Win vista hm.prem./wu/update/

  Win vista hm.prem./wu/UPDATED - 1 attempt today (successfully) - install/THEN/5 x of other attempts to install the update-TODAY ' HUI-a failed and successful "duplicate" //-AFTER-// I changed the day - to - download & install update after selection.

  jbland,
  In addition to post the information requested from PA bear.  You can try the steps in this article and view the results as well.

  Troubleshooting Windows Update: offered on several occasions to update

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Where the log file is located (Win Vista) for the actions of OTHER USERS have taken to using the boxes in user account control?

  Where the log file is located (Win Vista) for the actions of OTHER USERS have taken to using the boxes in user account control?

  I use the version of Vista Home Premium.

  While I don't really like how the UAC area enters the information that tells it when to display the box tell me about your work of things on the UAC (I know an article exist on the web), is not how to answer this question.

  There is no log of UAC elevation file.

• Is IOS 9.3.2 update cause any problem on my phone?

  Is IOS 9.3.2 update cause any problem on my phone?

  What are all the specs is added to this update.

  My phone looked up crash when you receive an incoming call. This happens twice in the day.

  Can you please send back with your answer to all these questions.

  No problem causes update for devices, updates are made to overcome bugs and Yes, it is good to update your device to the latest version.

  The specifications are bug fixes and improves the security of your iphone.

  After updating your device works very well, otherwise ping - me and clarify the problem.

• Windows Update causing various problem on the computer

  Original title: bad update?

  11/10, I downloaded and installed updates Vista KB2641690, KB2492386, KB972971644, KB2505189. There is more, but this format makes it very difficult to enumerate. My computer is now constantly lock up, and various closed functions (Explorer being the worst).

  My computer works horribly since the update. Is there a way to reverse the updates, or should I use a fixed disc and just pray that I don't have reinstall?
  THX

  Hello

  Method 1: I suggest you to restore the computer to a point in the update got installed then install the update one at a time to determine the cause of the problem is updated:

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Method 2: You can try to install the updates to the clean boot in order to verify if any third-party application is causing the problem:

  http://support.Microsoft.com/kb/929135

  Note: after a repair, be sure to configure the computer to start as usual as mentioned in step 7 in the above article.

  Method 3: Try a manual install of update by downloading the update from the Microsoft Download Center:

  http://www.Microsoft.com/download/en/default.aspx

  Note: the number of the KB article in the search box to search for the update.

  Reference: the problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

• Win vista basic keeps repeating same update sp1

  I reinstalled a Vista Home Basic win in another computer.  It will not install sp1 properly.  He resumed the sp1 update whenever I try to update
  Ralph

  See the article after some troubleshooting for your question:

  http://support.Microsoft.com/kb/910339/en-us >

  Please let us know if it did or did not help to solve your problem

  UTC/GMT is 07:13 Tuesday, July 31, 2012

• Why I repeatedly get a security update for Windows Vista for systems (KB2676562) and update for Windows Vista (KB2679255) focused on the x 64 even after that both have been installed successfully?

  update of security (KB2676562) has already been correctly installed 21 times, began towards the end of May.  Update for Windows Vista (KB2679255) was successfully installed 35 times, he began in mid-April.  These two continue to update themselves every day and do it at least twice a day, back to back.  It is very frustrating to have to deal with that and makes me think that something may be a problem with my computer.  I had heard of registry cleaners is not not a good thing to use, if recently I not unhooked my registry free cleaner.  I hope that it has not caused my computer to lose any registry key values.  Does anyone know a possible solution or what I need to do? I thank everybody help, please!

  Hollow salvation of the farm,

  Try these steps

  Method 4: Reset the contents of the Catroot2 folder

  go to start > all programs > Accessories > right click on command prompt > run as administrator

  Reset the contents of the Catroot2 folder. To do this, follow these steps:

  Type the following commands and press ENTER after each command:

  net stop cryptsvc

  MD %systemroot%\system32\catroot2.old

  xcopy %systemroot%\system32\catroot2.old /s %systemroot%\system32\catroot2

  output

  Restart the PC and then

  Method 8: Rename the folder C:\Windows\SoftwareDistribution

  Rename the Windows Update temporary C:\Windows\SoftwareDistribution folder. To do this, follow these steps:

  Open an administrative command prompt window.

  Run the following commands and press ENTER after each command:

  Net stop wuauserv

  CD %SystemRoot%\System32

  Ren C:\Windows\SoftwareDistribution SoftwareDistribution.old

  Net start wuauserv

  Try to install updates again.

  also try to scan your computer

  Method 1: Use the Microsoft Safety Scanner to scan your computer for viruses and malware

  
  To analyze your computer by using the Microsoft Safety Scanner, click on the following link:

  http://www.Microsoft.com/security/scanner/ use the software to combat spyware and antivirus software to scan the computer.

  To see a list of third-party anti-virus software vendors, visit vhttp://www.microsoft.com/windows/antivirus-partners/windows-7.aspx.

  To download and install Microsoft Security Essentials antivirus software, visit http://www.microsoft.com/en-us/security_essentials/default.aspxc.

  Please come back if you need assistance

  Thank you

  Makoi

• Windows Update Cause shutdown problem? [was: Win 7 Professional]

  Under Win7 Pro 64-bit Acer Last nite my mouse froze and I was not able to turn off the laptop. I disabled manually and I tried restarting and screen that says Win does not close properly, two options were given allow windos fix this and start earning normally. I chose an and still no start, then I choose the other (after turning it off again) and still no rebbot.

  The beginning of victory just hanged. I could then by going to F8 to get into the Safe Mode and access to a chess program that has worked well, but I obviously didn't have Internet and my anti0 virus does not. Then I tried to boot into safe mode with network and allowed me to access the net, but with my antivirus doesn't work do not. I tried restoring the system several times and got little results. Tonite while I ran this prograam of chess (not a new or recent installation of the software) and it closed and I tried to reboot and presto! My laptopseems do return to normal. Then I had Win Update telling me that I have 11 new updates that I write this are download and beinf installed. Someone told me that MS had problem this week with updates. Can anyone confirm this?

  Hello

  Thanks for posting your query to the Microsoft forum. I will definitely help you with this.

  I appreciate your efforts to try to solve the problem.  This could be due to conflicts during the installation of Windows updates as some optional updates may also be installed.

  Check Windows story update and let us know what Windows Update have been installed recently?

  Let us know if you need more assistance. We will be happy to help you.

  ____________________

  Thank you best regards &,.

  Isha Soni

• After downloading the last update for my iphone 6, it caused a problem with Siri... everyone has experienced the same thing?

  I downloaded the latest update for my iphone 6.  Siri now does not work.  Is there a link?

  Yes, lately, siri is useless for me.  Every time I try to create a reminder (of dozens of times a day) it says "a s...". "followed by"I'm sorry, I couldn't create a reminder. »

  Turn off the phone and then back on (full stop) restores this feature for about 30 minutes, then it stops working again.

  Also, when I say "Open recalls" Siri she responds with "I'm sorry, but I can't find an application named"reminders"on your phone.

  This is despite the fact that the reminders app is RIGHT THERE and there and APPLE APP.

  Ridiculous.

• My time will not be updated, causing various problems on all kinds of things on my computer.

  It began with my time do not update automatically. When I go to the tab "internet time" to connect and update, he needs an administrator to fix it and even though I am the administrator, it won't let me, but that's another issue all together. I have fixed this before going to msconfig comand prompt and then cancellation of the registration on the server time and re-registration. This fixed for about a month, but his pass yet. I've updated to implement everything and searched tons of forums and convenience stores without getting an answer I've already tried. Help, please! I'm very limited in what I can do because of this.

  Wow, the loss of time

• Update causing error problem"ssing or 32\DRIVERS\pci.sys corrupt system"

  Original title: update the problem cause

  After updating major on XP, cannot restart. Emergency start screen goes to "missing or damaged system 32\DRIVERS\pci.sys. How can I move from this screen to allow the use of the Windows CD-ROM to allow the repair to activate? Help gratefully received.

  PCI.sys error when Windows starts

  Problems with damaged or Incompatible hardware with Windows XP
  http://support.Microsoft.com/?kbid=330181

  Windows could not start because the following file is missing or corrupt:
  System32\DRIVERS\pci.sys
  Setupdd.sys could not be loaded. Error code 4.
  -or-
  Setupdd.sys could not be loaded. Error code 7.

  When you start Windows, you may receive an error similar to:
  File is missing or corrupt: C:\Winnt\System32\Drivers\Pci.sys

  To restore the file, perform an upgrade on the spot or expand the file from the Recovery Console:
  1. start the Recovery Console.
  2 select the installation that you want to access.
  3 enter the administrator password.
  4 entry card to determine the drive letter assigned to the CD-ROM.
  5 type: Expand, CD-ROM drive>: \i386\pci.sy_ c:\Winnt\System32\drivers/y.
  You should receive:
  PCI.sys
  1 file (s) expanded.
  6 type exit to complete the Recovery Console.

  Install and use the Recovery Console in Windows XP
  http://support.Microsoft.com/kb/307654

  The above is my notes on Windows XP - no guarantee

• Is it possible to load vista x 64 sp2 safely to avoid startup problems?

  I had problems with vista premium x 64 stall during what seems to be loading the driver of tunnel.sys. All equipment is new Phenom x 4 9200: Council AMD geforce 8200: 8 GB of ram: 1 TB of HARD drive.  I have tried everything I can read everything!  I gave up and I am reformatting the drive & reinstalling windows. I'm sure that SP2 is the culprit, is it possible to load updates so that they are in conflict with each other?

  Hi billyelevator,

  Thanks for choosing the Microsoft Answers forum.

  You format it and reinstall Vista I recommend you to install all the updates of windows and the Service Pack before installing your software.

  If you are an Office user, it is safe to install Office and run for Office updates after the installation of the Service Packs.Once is done, you can install the required software.

  Run the system update readiness tool and install service pack 2 on your computer.

  System Update tool checks your computer and trying to resolve certain conditions that can interfere with the installation.

  Description of the tool system for Windows Vista update:

  http://support.Microsoft.com/kb/947821/

  How to obtain the latest Windows Vista service pack

  http://support.Microsoft.com/kb/935791/

  Make sure that you remove all devices external (except keyboard and mouse) on your computer during the installation of SP2.

  You can also go through the link below:

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues

  http://support.Microsoft.com/kb/947366

  Hope the information is useful.

  Kind regards

  Yama - Microsoft technical support.

• Installation of XP SP3 causes startup problems

  Just done the SP3 download and now Windows won't start.  It goes into a loop, if I try to boot into Normal mode.  Only way to start Windows is in Mode without failure.

  See this recent & related discussion: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/dfc3ef4b-019d-408e-9598-c71531c920ef ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Roxio uninstall causing startup problems

  My system is a Dell Inspiron 518 on Windows Vista Home Premium, 64-bit desktop. The Roxio Creator OF 10.2 has been pre-installed by Dell. I decided to uninstall the unused program, carefully follow the instructions on the Roxio site, which includes editing the registry keys and delete hidden files.

  I found myself with starting seeds: two previously used programs 'configuration' at every start, my Dell Dock missing language files, my McAfee Security Center giving a popup "system is at risk", which immediately becomes "the system is protected" when I click on 'technical assistance '.

  I tried to use a just system restore before uninstalling the Roxio program, but my problem persists.  However, I have a file that is an export of the registry before I made some changes according to the instructions of Roxio. I have the Roxio installation disc that came with my Dell.

  My questions are all related:

  Should I try importing the registry from the point just before the uninstall?  If so, is it possible to export the current registry so that it is a separate file that I want to use - in other words, export the current registry as a measure of protection would cause him to crush the export that I wanted to use?

  Finally, it would be wise to try to reinstall the program disk Roxio if import above does not solve my problems start?

  Hi tealbingy,.

  This document should help you import the registry keys.

  Dena
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.