is it only 1 triggered HERE enough?

Similar Questions

• Cannot remove the r ' only R backups, not enough space

  I have V3.01.1037.00 R & R installled on my son's cell phone.  It has a few old R & R backups that I want to delete.  I ran R & R programs in the list and found the Advanced tab, which allows me to delete the backups... but when I try and remove the one it says (after request confirmation and "Please wait while the backups are deleted"):

  "Rescue and Recovery has not enough space disk to perform the requested operation"

  and then do nothing.  I tried turning the properties from the Recycle Bin to "do not move files to the Recycle Bin" in case that was the problem, but that did not help.

  Backup file is 15 GB (!), free space on the disk is 5 GB.

  leamphil, welcome to the forum,

  removal of the last backup that was made on his own, and then the others worked for other members.

  Hope this helps

• TouchEvent only will not work properly with two mobile fingers

  Hello

  I'm not quite sure what the problem. My code running, sometimes, this mobile finger 1 causes actions that could only be triggered by moving the finger 2. When mobile fingers 2, then, further actions are triggered, which could be invoked by the 2 finger, so it seems to be a bit strange. It's also a little messy to debug. Anyone ideas? Is this a case for the Issue Tracker?

  
      private int lastX1;
      private int lastY1;
      private int lastX2;
      private int lastY2;
      private int lastAngle;
      private boolean fingerOne = false;
      private boolean fingerTwo = false;
  
      boolean touchEvent(TouchEvent message) {
  
          switch(message.getEvent()) {
  
          case TouchEvent.DOWN:
              if(message.getX(1) > -1) {
                  lastX1 = message.getX(1);
                  lastY1 = message.getY(1);
                  fingerOne = true;
              }
              if(message.getX(2) > -1) {
                  lastX2 = message.getX(2);
                  lastY2 = message.getY(2);
                  lastAngle = Fixed32.atand2(lastX1 - lastX2, lastY1 - lastY2);
                  fingerTwo = true;
              }
              return false;
  
          case TouchEvent.MOVE:
              if(message.getX(1) > -1 &&
                      (lastX1 != message.getX(1) || lastY1 != message.getY(1))) {
                  //do some action here
                  lastX1 = message.getX(1);
                  lastY1 = message.getY(1);
                  if(fingerTwo) {
                      lastAngle = Fixed32.atand2(lastX1 - lastX2, lastY1 - lastY2);
                  }
              }
              if(message.getX(2) > -1 &&
                      (lastX2 != message.getX(2) || lastY2 != message.getY(2))) {
                  lastX2 = message.getX(2);
                  lastY2 = message.getY(2);
                  final int lastAngle = this.lastAngle;
                  this.lastAngle = Fixed32.atand2(lastX1 - lastX2, lastY1 - lastY2);
                  final int rotation = Fixed32.toRoundedInt(this.lastAngle - lastAngle);
                  //do other action with rotation here
              }
              return false;
  
          case TouchEvent.UP:
              if(message.getX(1) > -1)fingerOne = false;
              if(message.getX(2) > -1)fingerTwo = false;
          }
  
          return false;
      }
  

  I'm not sure what the problem is that you meet, but there is a problem with the TouchEvent return incorrect values if the two points of contact Cross (IE if you touch the left and right of the screen and then move your fingers together, once they cross the X 1 value will now follow the finger instead of finger 1 2).

• Thunderbird communicates only with servers?

  I use Thunderbird 24.6.0 on a Sony Vaio with Windows 7. Everything worked along smoothly until about a week ago. One night, I used Thunderbird to check my e-mail from Comcast (as I did for years) and everything was normal. The next day, worked in Thunderbird. When I open Thunderbird, it says "Connecting to < email server >"... and nothing ever happens. I use this as my main account email account, so I don't usually open Thunderbird every day, so I have not messed with it again since then. Today I decided to try again and nothing has changed: it says "connecting" but never connects to receive my email. I tried to send an email as a test and got the message, "the message could not." not sent because the connection to the smtp.comcast.net failed I went to the Comcast website to check all my settings and checked them in Thunderbird. I noticed that my account in Thunderbird was introduced as POP and Comcast recommend IMAP so I tried changing it to that, but nothing works.

  I don't know if this means something important or not, but if I go to Account Settings-> Actions-> account and click on get a new account, I get a message that says: "sorry - we are unable to communicate with our server subscription. Please check your connection. "This reminds me of Thunderbird just cannot communicate with the internet at all, and I have no idea why this would be the case (especially since nothing has changed in the interval between when Thunderbird last worked normally and when it started).

  I can access my e-mail through my phone, and Comcast web mail is certainly not a problem with my email account. Any help would be greatly appreciated. Thank you.

  Yes, Matt, I was frustrated. I'm sorry, but it's frustrating when your email suddenly stops working without obvious reason why. Only, I posted here when, after a week, he doesn't always work and any troubleshooting that I helped him. All my Comcast server settings were correct. My firewall doesn't seem to be the problem. I only started to tinker around with settings of the server as a last resort when nothing else has worked, and then who still made no difference (because I was correct and as indicated previously, you cannot exchange a POP IMAP account - AND it wouldn't let me create a new account, because he says that it could not connect).

  As I mentioned above, I didn't know that my version of Thunderbird is so old and obsolete and Thunderbird did not tell me that is. He said even she was aware and that he wouldn't do an automatic update. After update it the other night, nothing seemed to be different because it has expired always all telling him ' connection to...» ». However, this morning, it downloaded my mail. I brought no further changes - everything is as it was when my last message, but now it seems again to communicate with mail servers. I still don't understand, but fine, it works. Oh, and Yes, my modem is provided by Comcast. I'll go look for exactly what model is if my problem comes back.

  I apologize for my frustration with the situation, but I appreciate your response and your help.

  Megan

• Sorry because of their privacy settings, this video can be read here

  HI since to do the update yesterday to iOS 9.3 I get "Sorry because of their privacy settings, this video can only be read here" on safari and Google. The video played until the update. they play ok on Samsung Tablet and PC. Someone knows what's the problem?

  Is the active cookies?

  Settings > Safari > block Cookies > allow Web sites I visit

  Make sure that it not on private browsing

  Visit the sites without writing the story. Press on , and then click private. Sites you visit do not appear in the iCloud tabs or be added to the history on your iPad. To store your private sites, type , then press private again. You can close the pages or keep them to display the next time you use the Private Browsing Mode.

• Refuses to print in monochrome only

  Recently, I replaced my Canon printer with a HP Potosmart 6520, which I put in place in order to exploit via WiFi. I use Open Office under Windows 7.

  When I click on print with Canon printer I have given the possibility to print in color or black and white and slecting b & w worked well.

  Now with the Photosmart if I select b & w it does not work and print in color without worrying.

  I looked out the window / settings in HP and Open Office, but have not found a solution.

  Any help would be appreciated

  No problem.  You're good.

  The problem occurs if you are using other programs?

  Have you tried to change the default settings in black ink only?  Click here for help.

• Windows Vista Home Basic 'local only' access via ADSL router, broudband

  Hello

  I've set up a new router broadband wireless ADSL to connect to my broadband PostOffice.com existing Standard.

  The router is a Belkin F7D1401uk Surf N150 model.

  It is facing up and running and I can use other machines to connect to the internet through it. A netbook running Windos XP SP3 and a mobile phone (Nokia X 6), but my laptop main running Windows Viast Home Basic SP2 (32 bit) do not have wireless internet access.

  It is a Fujitsu Siemens Amilo Li 2727 laptop. If I connect to the new Belkin router using an ethernet cable, I can connect to the internet. But when I unplug the ethernet cable and turn on the WiFi I see a connection to the modem Belkin Wireless, but on an 'unidentified network' and with 'local access' only.

  Here is a copy of what I get when I run "ipconfig/all" at the command prompt:

  Windows IP configuration

  Name of the host...: Clare-PC
  Primary Dns suffix...:
  Node... type: hybrid
  Active... IP routing: No.
  Active... proxy WINS: No.
  ... DNS suffix search list: Belkin

  Wireless network connection Wireless LAN adapter:

  The connection-specific DNS suffix. : Belkin
  ... Description: Atheros AR5007EG Wireless Network adapt
  Physical address.... : 00-16-44-E8-64-2C
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  Address IPv6 local link...: fe80::4d89:e63c:ba6c:1c4d % 11 (Preferred)
  IPv4 address: 192.168.2.3 (Preferred)
  ... Subnet mask: 255.255.255.0.
  Lease obtained...: April 3, 2011 15:59:55
  End of the lease...: May 11, 2147 00:41:44
  ... Default gateway. : 192.168.2.1.
  DHCP server...: 192.168.2.1.
  DHCPv6 IOOKING...: 268441156
  DHCPv6 DUID customer...: 00-01-00-01-13-A7-2B-7F-00-1F-16-00-9E-C4
  DNS servers...: 192.168.2.1.
  NetBIOS over TCP/IP...: enabled

  Ethernet connection to the Local network card:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. : Belkin
  Description...: Realtek RTL8101E Family PCI - E Fast Ethernet NIC (NDIS 6.0)
  Physical address.... : 00-1F-16-00-9E-C4
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 7:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Teredo Tunneling Pseudo-Interface
  Physical address.... : 02-00-54-55-4E-01
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 12:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. : Belkin
  ... Description: isatap. Belkin
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  So, it looks to me that use wireless I have an IP address and the default gateway and DNS servers are correct.
  But I do not understand why I "local access" only.

  Can anyone suggest what I can do to get my laptop connected wireless to the internet please?

  Kind regards
  David

  Hello Ttard,

  Thanks for your post.  One of the solutions, I saw about this problem is to go to your system manufacturer's Web site and download / install the latest driver for your computer wireless.

  This thread is very long, but has some great troubleshooting in steps.

  Please let us know if this information helps with your problem.

  See you soon

• cannot change the loan only parameter in the file properties.

  I tried to edit a photo that I have previously loaded to my laptop but it gave me an error message saying "this photo have not been modified. This file can be a read-only or that you are not allowed to save photos to the location."  I finally understand where that height was and it is actually extracted a single reading file but when I go to uncheck and apply and save and exit, he goes right to read-only.  This has never happened before, I edited the images of this album in recent weeks. Help

  You must grant you full rights and perhaps even to take possession of the file and, possibly, its parent company or folders to remove the read-only attribute.  Here are some tips that can help you:

  To view your permissions, right-click on the file/folder, click Properties, and check the Security tab.  Check the permissions you have by clicking on your user name (or group of users).  Here are the types of permissions, you may have:http://windows.microsoft.com/en-US/windows-vista/What-are-permissions.  You must be an administrator or owner to change the permissions (and sometimes, being an administrator or even an owner is not sufficient - there are ways to block access (even if a smart administrator knows these ways and can move them - but usually should not because they did not have access, usually for a very good reason).)  Here's how to change the permissions of folder under Vista:http://www.online-tech-tips.com/windows-vista/set-file-folder-permissions-vista/. To add take and the issuance of right of permissions and ownership in the right click menu (which will make it faster to get once it is configured), see the following article:http://www.mydigitallife.info/2009/05/21/take-and-grant-full-control-permissions-and-ownership-in-windows-7-or-vista-right-click-menu/.

  To solve this problem with folders, folders takeownership or the reader (as an administrator) and give you all the rights.  Right-click on the folder/drive, click Properties, click the Security tab and click on advanced and then click the owner tab.  Click on edit, and then click the name of the person you want to give to the property (you may need to add if it is not there--or maybe yourself). If you want that it applies to subfolders and files in this folder/drive, then check the box to replace the owner of subcontainers and objects, and click OK.  Back and now there is a new owner for files and folders/player who can change the required permissions.  Here is more information on the ownership of a file or a folder:http://www.vistax64.com/tutorials/67717-take-ownership-file.html. To add take ownership in the menu of the right click (which will make it faster to get once it is configured), see the following article:http://www.howtogeek.com/howto/windows-vista/add-take-ownership-to-explorer-right-click-menu-in-vista/.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• ListField.drawListRow only draws a line in the first row, all the lines.

  I'm close. ListField.drawListRow is called for every row without problem, but the two graphics.drawLine only are displayed (shot) in the first row at the point of coordinates noted.

  I thought that each line would get the two drawn drawLines?

  Graphics.Clear is called correctly (as a test only - I have commented out them as well, but not changes).

  How can I get the two Graphics.drawLine at the bottom of the method called for each line, correctly?

  public void drawListRow(ListField listField, Graphics graphics, int index,
          int y, int width) {
      Logger.debug("CoffeeStoreContent [drawListRow] y: " + y + " width: " + width);
      /*
       * Top Margin
       */
      y += appGraphics.calcHiRes(6);
  
      int[] colors = appGraphics.getColorPalette(sportTitle);
  
      /*
       * Get the current CoffeeStore object.
       */
      CoffeeStore currentRow = (CoffeeStore) get(listField, index);
  
      StringBuffer subline = new StringBuffer(currentRow.getSource());
      subline.append(Characters.SPACE);
      subline.append("|");
      subline.append(Characters.SPACE);
      subline.append(currentRow.getDateAgo());
  
      int HiX = 43;
  
      if (graphics.isDrawingStyleSet(Graphics.DRAWSTYLE_FOCUS)) {
          graphics.clear();
          graphics.setColor(AppGraphics.YELLOW_HIGHLIGHT);
          graphics.fillRect(0, (index * listField.getRowHeight()),
                  listField.getWidth(), listField.getRowHeight());
  
          graphics.setFont(font);
          graphics.setColor(Color.BLACK);
          graphics.drawText(currentRow.getLinkText(), HiX, y, 0, width);
  
          graphics.setColor(AppGraphics.TEIGHT);
          graphics.drawText(subline.toString(), HiX, (y
                  + graphics.getFont().getHeight() + 2), 0, width);
      } else {
          graphics.clear();
          graphics.setColor(colors[0]);
          graphics.fillRect(0, (index * listField.getRowHeight()),
                  listField.getWidth(), listField.getRowHeight());
  
          graphics.setFont(font);
          graphics.setColor(AppGraphics.TSIX);
          graphics.drawText(currentRow.getLinkText(), HiX, y, 0, width);
  
          graphics.setColor(Color.WHITE);
          graphics.drawText(subline.toString(), HiX, (y
                  + graphics.getFont().getHeight() + 2), 0, width);
      }
  
      graphics.setColor(colors[2]);
      graphics.drawLine(0, 50, width, 50);
      graphics.setColor(colors[3]);
      graphics.drawLine(0, 51, width, 51);
  }
  

  No - only y + 50 is enough.

• Removal of Smartphones blackBerry and reading the emails in Outlook not reflecting only not on Blackberry

  I've set up by O2 of BIS and links to 3 email accounts.  They are all IMAP.  I start Outlook to connect to these accounts from my laptop.  Almost everything works perfectly.  Always receive emails for delivered to Outlook and Blackberry OK.  If I open an e-mail or delete it on Blackberry, then this is reflected in the accounts of e-mail OK.  All emails deleted on the Blackberry are displayed in a basket on my email account.  What does not work, it is when I delete or read an e-mail in Outlook.  This is reflected on the Blackberry and I have to manually read or delete messages on the subject.  All the settings for accounts on the Blackberry look good balance that is wireless enabled, the victories of the mailbox and delete on handheld and mailbox is enabled.  If I do a balance now, nothing happens, read and deleted messages are still on the Blackberry.

  Any ideas anyone?

  You need BES to do, only BIS is not enough

• Please someone tell me why I get this error, as my D: recovery drive has 3 GB of space on 28, I don't know how to delete it and it may be the cause but I'm not sure, that's why I'm here :(

  The error is the reference 0x00c91187
  memory 0x47be01e0. The memory could not be read

  Here is a link to the screenshot of my http://tinypic.com/view.php?pic=1e56v6&s=8#.VCyjYPldVOZ error

  I don't know why I get this error and its very annoying, my hard drive has 3 GB of space for 28 gigatbytes, why is there so much space taken up there and how I delete it without hurting important files

  It dose it when you try to run an apillication game. or other

  Sorry for not being detailed

  I hear by clear weather, how to free up space on my D: recovery drive?

  and I am referring to the game app is soldier fonts 2, it gives me error when I start the game

  and no, I only get this error with the soldier make game 2 application only

  and here's a better link RII

  Sorry for the inconvenience

  http://Tinypic.com/view.php?pic=1e56v6&s=8#.VC3GRfldVOZ

  OMG IT WORKS SO BAD, I HAD TO UPGRADE TO WINDOWS 8.1 WAHOOOOO

• License error: 0 Mocha AE CC must be open only from After Effects

  I placed an AE file in the project to create and tried to export using Media Encoder (all CC). When I try to open the m4v file, I get an error message: "license error: 0 Mocha AE CC should be open from After Effects '-what it means and how to fix it? Is it because we are using ME to export rather than rendering directly from first? We are only to learn here and would appreciate any idea. Thank you.

  Take a look at these:

  Mac forums

  License error: mocha AE CC when opening quickti... | Apple support communities

• I bought the thing only app for illustrator, but the creative cloud thing keeps giving me the trial version?

  AY yo I made a purchase plan only app to 200 per year and the darn creative cloud thing won't let me use the thing, I bought. It keeps giving me the trial version.

  It won't let me sign up or the license of the thing for nothing.

  The trial and the actual application are the same, they use your license.

  You have already subscribed.

  Check the details of your account on Adobe.com to see if the active subscription will appear.

  Sign in to creative cloud with the SAME Adobe ID (what is essential, since it is the only way for her).

  If this still does ' t help, let us know what is happening, including error messages.

• not triggered alarm not: insufficient vSphere HA failover resources

  This alarm is only triggered when a HA action fails?  I have a cluster of two hosts ESXi 5.0, and since I'm on more than 50% of available memory on each host, for me, it seems that I can't tolerate a single host failure.

  

  HA and DRS are enabled on the cluster, and the "admission control policy", I have 'percent of reserved failover cluster resources', set at 50%.

  So why no alarm?  My goal is to get an alert before to reach the State we begin, where we cannot tolerate apparently not a failure of the host.

  > Based on this and the absence of the alarm, we can assume that if I dropped one of the hosts of this 2-host cluster, all the virtual machines would be able to start on the only host remaining, correct?

  Correct, if one of your guests crashed or zero all your VMS would have sufficient resources to start (no guarantee of performance, just start/running)

  > And the alarm, I want to talk to the title of this thread only is triggered when what 98% to 50% or less, correct?

  There's no alarm. When your ability to failover CPU or memory reaches 50% admission control will prevent you from turn another VM

  > I am still concerned about the diagram of distribution of this resource for memory, however. It looks like I could push up to 100% on both hosts and still no push failover memory less than 50% capacity. I guess that this is due to the fact that my virtual machines have no memory reserved, so vSphere counts only the minimum amount of memory to start the virtual machine, and it will depend on permutation and balloon so all virtual machines start actually using all of their memory.

  Fix

  > So the alarm I'm looking for is the one that reproduces the table of distribution of resources and alerts when the total unused memory in the cluster is less than the total memory to a single host.  Make sense?

  I'm not aware of an alarm like this. You may be able to find something through google or create something yourself. On the creation of reserves for your virtual machines? Or less the most important? This way you can ensure that they will get resources when they restart. Or if you really want you can replace admission control by hosting dedicated failover policy? (I do not think that I recommend with what I know of your situation, but it will give you what you ask for).

  Have you watched the vRAS fling? VM and Service availability & #8211 resources; VMware Labs

  This adventure allows you to perform a host on your infrastructure failure analysis. You can simulate the failure of one or more hosts in a cluster (vSphere) and identify how:

  • Virtual machines will re-start safely on different hosts
  • Virtual machines would not be restarted on different hosts
  • Virtual machines would be the degradation in performance when rebooted on a different host

  With this information, you can better plan the location and configuration of your infrastructure to reduce the downtime of your virtual machines / Services in case of failure of the host.

• Select read-only list / or show only

  Hello
  I have list items of selection based on lookup tables. When the form in edit mode, I want to prevent the user from changing the value of the select list items. How can I accomplish this?
  * If I change the type of the element to display only, then it will display the value returned from the selection list.
  
  Kind regards
  Water

  Good morning, water,

  Amend section-> read-only-> read-only Condition

  Here, you can set the condition to display the item read-only. It works for select list point in the well.

  Kind regards
  Hari