Is it possible to view and burn DVDs of movies I have watch it on Netflix on my computer. I use Win 7.

Similar Questions

• "Reading and burning DVDs in Windows 8.

  Just recently my uncle died, after 76 years, and a DVD were made from photos of his life. I don't have a DVD player. So when I got a DVD in the past (with windows 7) I was watching it on my computer. And if I had a family DVD I would like to make copies for guard duty, I would burn it... Just recently, my old computer with windows 7 past as well. So I bought a new a Windows 8 and found that it will not play or burn DVDs. What can I do? And if I have to upgrade, I would do it with a program/system that is compatible with Windows. I don't have a lot of money through autour, but I don't want for a free system and take the chance of getting malware or virus... Help, please. What is the best program/system for windows 8, which will play and burn DVDs?

  For DVD player, you need to just install K-lite codec pack, then you can play a DVD with windows media player on your windows 8. No need to buy anything.

  For DVD burning, I would recommend you convertxtodvd , works well on windows 8, safe and easy to use.

• I need a replacement CS6 Design and Web-DVD Premium. I have a new computer and no longer have the DVD. My serial number is saved in my Adobe member account.

  I need a replacement CS6 Design and Web-DVD Premium. I have a new PC and no longer have the installation DVD. My serial number is saved in my Adobe member account.

  Download the files you need to download Creative Suite 6 applications

  Install and enter your serial number.

• Satego X 200 - 21 d: drive DVD TS-L632D is not read and burn DVD-R DL

  Hallo,

  I have problems with my DVD SATEGO X 200 - 21 d
  TS-L632D read a burn only DVD-R DL discs.
  I contacted Toshiba support via e-mail and asked
  for a new disk firmware, but the answer did not solve my problem.

  There are only updates in the download area of toshiba,
  but not for my car model. I can send my laptop
  for the money to a service partner, to check this problem.

  I do not understand this! I bought a laptop upscale
  for 1,700 EUROS and there is no support for the update of the firmware
  available to solve problems with newer drives?

  If I get this problem in the WEB, there is an a large number of
  questions and problems with playback and engraving
  Discs DVD-R DL with this drive model!
  How is it possible?

  I hope for some advice to get an update of the firmware player
  to solve the problems of reading and writing DVD - R DL discs.

  Janni J. Gettings of Germany

  Hello

  I found the update of the firmware on the European driver Toshiba page!

  Satego X 200 - 21 d seems to belong to the PSPBEE and the Toshiba page provides the update of the firmware to TO02.
  It s for the TS-L632 reader.

  But generally not all CD or DVD of all manufacturers is fully supported.

  My knowledge of the user manual should provide a details and info on compatible and tested media.
  Using recommended media, you can be sure they will be compatible and will work 100%.

  Greetings

• I can't burn DVD with movie maker window

  I use windows vista, and until very recently, I had no problem with windows movie maker.  But during the past year, whenever I try to burn a dvd, it burns at about 40 percent or more and then all of a sudden, it will say 'cannot complete the dvd, 'unknown error'.  Are there any suggestions as to why this might be happening?

  Hello whalelover,.

  You can try the problems Troubleshooting Microsoft listed here for problems with burning CD/DVDs .
  There is an automatic FIXIT who will scan your computer and fix problems that he sees.

  If this does not help, it may be a problem of encoding and you don't have the correct Codec to hole in Movie Maker.

  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

  Please answer back with an update.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• When I RIP and burn music with windows media player the disc will only playback on computer

  I must have the wrong settings on my functions to rip/burn because the music, put on the disk is reproduced on my computer, but not my cars, stereo system. When I read the file for each song extension, the extension is "wpl" what are the correct settings for a retry? Windows xp.

  I must have the wrong settings on my functions to rip/burn because the music, put on the disk is reproduced on my computer, but not my cars, stereo system. When I read the file for each song extension, the extension is "wpl" what are the correct settings for a retry? Windows xp.

  ==================================================
  The .wpl files are probably Windows Media Playlist files... not real music files.

  Here is some info on the .wpl files:

  WPL file extension
  http://www.downloadatoz.com/file-extensions/wpl-file-extension.html

  File extensions on the Audio CD (music) that will play in a CD player must be CDA.

  The following link might be worth a visit:

  Windows Media Player 11
  for Windows XP
  Burn your own custom CDs
  http://www.Microsoft.com/windows/windowsmedia/KnowledgeCenter/HOWTO/MP11/burn.aspx

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• I need help reinstall Adobe Photoshop elements 12 and 12 Premium items. I have opaid to these programs, however my computer recently had to be reset through the recovery and they have been erased, any help? The link cat Adobe has me download some thing-bu

  Help. You need to reinstall Adobe Photoshop elements 12 and first 12 items. Both are pre paid programs I had on computer, however, the system had to be reset through recovery and these programs have been erased > given that I have already forked the money for these, I want to use them because I am an artist and need the programs. Please, any help? Ideas?

  You should try to keep the title short and sweet, and put the details in the message... it's a mystery what happened regarding the download link, so here's a few...

  PES 10, 11, 12 - http://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-10-11-downloads.html

  PE 10, 11, 12 - http://helpx.adobe.com/premiere-elements/kb/premiere-elements-10-11-downloads.html

• Qosmio F30 - 112 - DVD player can read and burn DVDs

  Hey everybody!

  Here's the problem: my DVD-ROM won't read some DVDs, it does not burn. In Nero when it start burning error pop up and the message is: Power calibration error

  I tried with all the testers for writer and reader of alerady and they all did not find any problem. They said that the recorder and player work properly. I even reinstalled twice end it always shows me this error and it will not burn or read some DVD Windows Vista (which I tried to read another computer and there is no problem). I tried to clean it with cleaning and nothing.

  I think that this problem started since I've updated the firmwire F103, but I do not know...

  Help please.

  Hello!

  Was the update of the firmware of your CD/DVD drive or have you another one? In my view, the drive could be faulty due to a bad firmware

  But before you exchange the drive, you should try to remove the upper and lower filters in the Windows registry:
  (1) start Regedit (start-> Run-> Regedit)
  2) go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class {4D36E965-E325-11CE-BFC1-08002BE10318}
  (3) in the right pane, delete the "UpperFilters" key and delete the key "LowerFilters".
  (4) restart.

  Good bye

• WMP 11 allows you to burn or read DVDs or only data CDs? originally made wmp 11 decoder has to read and burn DVDs or not? I am running windows xp sp3.

  I have windows xp pro sp3 and since I installed the fix wmp 11 Report Center that my disc is not readable in spite, I can play cds/dvds.and data also

  Impossible to install wmp! so the fix Center report as nero burning plugin causes wmp to crash or does not not despite

  every bit of nero have been removed from the registry.what going on? does any body help

  Hi Kostas,

  What is the brand and model of the computer?

  You can try the steps to drive your CD-ROM or DVD drive is missing or is not recognized by Windows or other programs

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756

  (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows

  Please post back with the State of the question.

• How to download movies on the internet on my computer and burn DVDs of it

  I don't know how low loading movie from the internet and create a dvd of it can someone please help

  Hi esthernall12,
   
  There are many web services available for download videos from video sharing sites. Please use your favorite search engine to find a reliable site to do.
   
  Coming to burn these movies on DVD, you can use Windows DVD Maker, Windows Media Center, Windows Media Player or Windows Explorer.
   
  Find help below articles.
   
  Burn a CD or DVD in Windows Media Center
  http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-in-Windows-Media-Center
   
  Burn a DVD-video using Windows DVD Maker disc
  http://Windows.Microsoft.com/en-us/Windows7/burn-a-DVD-video-disc-with-Windows-DVD-Maker
   
  Burn a CD or DVD in Windows Media Player
  http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-in-Windows-Media-Player
   
  Burn a CD or DVD in Windows Explorer
  http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-in-Windows-Explorer
   

  Important note: This response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• replaced the hard drive and burner dvd on vista computer

  After loading vista, computer is stuck on "Please wait while windows checks your computers performance" its been on 4 hours.any ideas?

  Hello

  1 succeeded installing Windows?

  2 - does this happen when you start?

  I suggest to start the computer in safe mode and check if you are able to boot:

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  If you are not able to start in safe mode, and then try to perform the Startup Repair and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  It will be useful.

• creation of DVD will not burn DVDs for movie maker projects, why?

  I have vista 32 bit. I save movie maker projects, then try to burn them on a disk, but it says only as (0r full 98, 99%) in a single box eventually & (cannot create the dvd, an error occurred while burning the DVDs) in the other box... sometimes it burns, but lately it's not at all... I bought a new drive, I did a restore of full operating system, but nothing works... I need some updates?... what I need to change the format?... BTW, my computer seems to not fit either...

  Hello

  ·        What is the format of the movie maker project file?

  Check if an error code is listed in the event viewer, see the link below: open the event viewer:http://windows.microsoft.com/en-US/windows-vista/Open-Event-Viewer

  You can also check out the link below: the problems with creating a DVD-video using Windows DVD Maker:http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-problems-with-creating-a-DVD-Video-using-Windows-DVD-Maker

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 7 starter edition will not burn DVD and will not format

  • My recorder DVD format player, will play and burn DVDs when I move my dvd drive to another computer running windows vista
  • It will not burn a dvd or format a dvd rw disc when it is attached to my netbook toshiba running windows starter 7

  http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-in-Windows-Explorer

  Engraving for Windows 7 Info

  If your computer has a CD or DVD burner, you can copy files to a recordable disc. This process is called burning a disc. Windows Burns discs in the active file system format or in ISO image format, depending on which disc format you choose.

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• What program to use to record and burn the DVD in Windows 8.1

  Help, please. I had VISTA and he had a program to record and burn DVD do I need to duplicate this program for Windows 8? Thank you

  Original title: Mackman

  Hello Larry,.

  Thanks for posting your query in Microsoft Community.

  I understand that you have issues with the burning software for Windows 8.1. We will certainly help you with the same.

  You can use the link below to burn a CD or DVD in Windows Media Player. You can burn audio or video files through this program.

  Burn a CD or DVD in Windows Media Player

  http://Windows.Microsoft.com/en-us/Windows-8/burn-CD-or-DVD-Media-Player

  Check also in store Windows there are some DVD burning software are available.

  Check out the link:

  http://Windows.Microsoft.com/en-in/Windows-8/Windows-store#1TC=T1

  You can also use your favorite web browser and install the free DVD burning software.

  Note: using third-party software or a link, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third party software or link can be resolved. Using third-party software or a link is at your own risk.

  I hope this helps. Feel free to write us again for assistance and we will be happy to help you come.

• Burned DVD - Equium A60 playback

  Hi guys, I was wondering if someone can help me. I have an Equium A60-692 with a Pioneer DVR-K13A CD-ROM drive. The current problem I have is that whenever I insert a DVD that was previously burned, not only by my pc, but others that the CD-ROM drive is unable to read. DVD, that I created in the past that worked very well also stopped play. All I get is the orange led flashing first and then rest it perminently on resulting in a failure in the dvd playback. The player plays original DVD movie very well and plays also any form of cd. Do you think the reader is endangered or is there a setting that has been changed? Any help on this would be greatly apreciated.

  Best regards Richard

  Hello

  It's not easy to say why it of not possible to read the burning DVD.
  You log out of engraving? Sometimes the medium cannot be read because the sessions of burning are not closed. But this is only possible if you burn CD/DVD several times.
  The second possibility could me not supported way. You must use different media.
  However try to remove you drive the Device Manager and reboot the device. The operating system should recognize the drive again. Well maybe this procedure will solve this problem.