is - this normal for a new phone make a humming noise.

Similar Questions

• When restoring to icloud for my new phone I have to restore the entire contents, or then I choose?

  When restoring from a backup to icloud for my new phone I have to restore everything or can I choose?

  Everything, after the restoration, you can delete things.

• Is this normal for retina imac to do great headphone plug sound during installation first speakers?  Some new arise as well.

  I have an imac of retina.  Since the day I bought it new, I also had new harman/kardon talking plugged into the headphone jack.  This has worked well for more than a year or two.  Recently, I noticed an occasional static or pop.  It is not very strong, it's just boring.  I went to make sure that the headphone jack was still firmly inserted on the speakers and a very strong buzz takes place when you first insert the speakers.  To be fair, makes the noise even if I touch just the end of the shooting (of speakers), as if my human energy is impacting on the speakers.   Is this normal?

  Everything seems to work very well for most Park with the imac and the speakers, once I insert them.  But they are a very strong when buzz jack of first contact with the helmet of the imac.  In addition, it seems to be a very slight whistle full time air and occasional pop of static sound.

  I moved the speaker wire to ensure that they were not in contact with anything whatsoever.

  I changed the plug for the speakers.

  I did a reset of the PRAM.

  I did a reset of the SCM.

  Another thing before I wrap up this thing and go through the genius bar appointment process?  Everything I am on?

  Thank you.

  Hello

  The short answer is no the explanation is that the headphones and speakers, both, must be in the State of "Turn off" when you connect or plug in the unit. Amplified as helmet speakers power can be "plugged hot."

  These phone can get dirty sitting and not mobile. Simply power off all devices and 'gently' work the phone jack to plug and unplug some times help you to establish a better connection. If this does not resolve the static electricity, then consider that it should be considered by a professional.

  Bravo!

• I got a new Sport iWatch for my birthday at the end of November. I followed the start of instructions for synchronization with my iPhone. Nothing happened. The iWatch battery was completely dead. Is this normal with a new show?

  The battery on my new iWatch was dead when I opened the box. Is this normal? The watch seems to work now after that I gave her a load.

  Hello

  The battery on Apple Watch charge will reduce over time, even when it is off.

  It is possible that your watch has been stored for a while before you received it as a gift. Your communities of Apple Support profile indicates that your watch has watch OS installed 1.0.1. This version of the software was released in may 2015 and was followed in September 2015 watch OS 2.0.

  For all the latest features and best performance, update your iPhone and Apple Watch for the latest versions of software (currently 9.2 and watch OS 2.1 iOS). The software update instructions are available here:

  - Update the iOS on your iPhone, iPad or iPod touch - Apple Support software

  - Update the software on your Apple Watch - Apple Support

  More information on the workload of your watch:

  Check your battery and load your Apple Watch - Apple Support

• iPhone 6s more repair - confirmation of the serial number for the new phone

  Hello

  I sent my phone in for repairs recently and received a new one. Of course, the new phone has a different serial number and I want to sell it. How can I get confirmation that the iPhone I received instead of the iPhone, I sent is what I got? The buyer expects me to have a confirmation from Apple that says I sent them a phone with serial number 'X' and they sent me a serial number "Y". I have no way to confirm this, it is very urgent.

  IIR, you got it in the mail, it should have a packing slip that accompanies it with serial number for information.  who can be paired the phone room in settings/general/about.  Should not your old phone number because it is no longer relevant. Warranty info can be obtained with the new serial number

• Is this normal for an Application project (developer Cloud Service) takes a lot of time in commissioning?

  Hello

  I just followed the step by step tutorial to create a new project of my developer of cloud service, but then I noticed that the time is too long for the procurement process (more than 24 hours).

  Is this normal or have I done wrong sth in settings?

  Thanks for any suggestions,

  Skender

  

  Well, I think it's normal since he finished only now the procurement process.

• Is this normal for Firefox Sync connected to my Airport?

  When I went into Firefox Sync, I found that it was related to my Airport via its Mac address. I have removed, but since then my Mac address is always listed under "Synchronization Options" and it the airport comes with all boxes checked (passwords, navigation, etc.) When I try to uncheck and click on 'OK', he returned to controlled the next time I look. Is this normal? Or if not, how is it? Thank you.

  Hello

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  
  Note: This will make you lose all the Extensions and preferences.

  • Sites Web open is not recorded in less than 25 versions of Firefox.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

  Thank you.

• Is this Normal for CHKDSK?

  Windows 7 has ever given me this problem previously, but is now, and I'm curious to know what would cause this.

  I ran 'chkdsk' command prompt window Admin to check one hard drive, other than my boot, as I usually do.

  Running "chkdsk" from a window seems to do a much better job for some reason any.

  Used the usual, "chkdsk x: /f. The reader is a blank Format, empty 50 GB SATA, who, being freshly cleaned and formatted

  should not, "chkdsk" very long took at all.

  A took almost half an hour, AND used 6.7 GB of system memory.

  

  Really?

  Somethings wrong.

  Have you used, ran a SFC, chkdsk on reboot on my boot drive, check virus, complete startup disk defragmentation.

  Clean everything. Any ideas?

  Hello

  Disk problems can take seriously very quickly so I would check carefully drive
  now and be sure to keep redundant backups of your important data (use several
  Methods).

  For even better and more efficient to check:<- advanced="">

  At the Recovery Console prompt (if you have one) or
  a Vista/Windows 7 disk - if you do not have a Vista/Windows 7 disk, you can
  borrow from a friend (it must be able to 32 or 64 bits and that they are not a copy)
  protected) or make a. Also your system manufacturer will sell the physical disks
  cheap since you already have windows.

  Chkdsk /f /r

  RESET

  After k and before space / f and before.

  sfc/scannow

  RESET

  Space after c and before.

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  ----------------------------------------------------------------

  Go to settings/settings F2 (BIOS/CMOS) often as you start so watch the screen as you start. Set the boot order on CD/DVD, to use disks of Windows (Vista or Windows 7 If you have installed.) Be sure to set in when.

  If you need to repair disks - these help repair Windows not re-install.
  Often, these records will help when the OEM recovery disk does not work.

  Download Windows 7 system recovery discs - charge now $9.75 for ISO
  images to make the discs. (It can be done on any computer running XP,
  Vista or Windows 7 which has a CD/DVD burner).
  http://NeoSmart.net/blog/2009/Windows-7-system-repair-discs/

  How create a Windows 7 system - free repair disc (must be made on a
  Windows 7 computer running the same 32-bit or 64-bit).
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  An installation disc is possible also to use for repair. Of course you would
  Use your own COST (product key).

  How to: What are my options for Windows 7 reinstall media?
  http://answers.Microsoft.com/en-us/Windows/wiki/Windows_7-system/how-to-what-are-my-options-for-obtaining-Windows-7/528163c1-0b2e-4AD2-a26d-7112851d1dc2

  Welcome to the recovery of Microsoft software
  http://www.Microsoft.com/en-us/software-recovery

  See MVP Andre Da Costa message in this thread.
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/how-can-i-download-gatewaywindows7recovery-disc/3c0ecd74-CFC1-4188-89c7-a6bbe8113ee1

  =====================================

  If CheckDisk is unable to fill as above:<-- manufacturer's="" diagnostic="">

  (The old 302602 links isn't now valid for Diagnostics links).

  Manufacturer diagnostic utilities - run one to your hard drive
  http://www.techsupportforum.com/hardware-support/hard-drive-support/462298-no-IDE-device-found.html

  Corrected list dated 06/09/2010

  Fujitsu hard drives: utility of diagnosis here
  http://www.Fujitsu.com/EMEA/products/HDD/

  Hitachi hard drives: utility of diagnosis here
  http://www.HitachiGST.com/support/downloads/

  IBM hard drives: use Hitachi utility *.

  Toshiba hard drives: use Hitachi or Maxtor utilities

  Maxtor hard drives: Diagnostic Utilities here (now SeaGate)
  http://www.Seagate.com/www/en-us/support/

  Quantum hard drives: use the Maxtor utilities

  Seagate hard drives: here Diagnostic utilities
  http://www.Seagate.com/www/en-us/support/downloads

  Conner hard drives: use the Seagate utilities

  Hard drives Samsung: utility of diagnosis here
  http://www.Samsung.com/global/business/HDD/

  Hard drives Western Digital: utility of diagnosis here
  http://support.wdc.com/product/download.asp?lang=en
  Trial versions of one of these 'might' help.

  SpeedFan
  http://www.almico.com/sfdownload.php

  HD Tune
  http://www.hdtune.com/

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" and="" devices="" for="" it :="" bicycle="" -="" mark="" twain="" said="" it="">

• How can BlackBerry Smartphones improved 9700 to 9900 - I move my apps for the new phone?

  I just switched carriers and got a new phone. I had several applications on the old phone, among free apps that I recently downloaded. When I connect to the blackberry app world with on my new phone connected, I see apps in 'my world '. When I connect the new phone, they all disappear. I got the blackberry app world could move the apps on my new phone, but it seems to be now way to do. It's like the old 'my world' disappears when I connect the new phone. I would have thought if they were not compatible with the new operating system that they show at least as being waiting for upgrade or something. Am I missing something?

  Most applications will be compatible.

  On the new device, go to AppWorld > MyWorld.

  Press the Menu button > refresh.

  You should see all your old apps in the list "uninstalled". Click at the top of the screen to pull down the uninstalled.

• You can buy and 2 Air iPad smart case and use this case for the new iPad 9.7 Pro?

  can you get an iPad 2 case Air and use it for the new iPad 9.7 Pro

  You should be able to. Both devices have the same accurate external characteristics. I think that the physical difference is that the Pro 2 has 4 speakers and 2 Air has two. (Pro has two on top, two on the bottom, 2 Air just has two on the bottom)

  Yes, as long as the case is not "blocking the speakers or you don't care (I use only headphones with my iPad so I don't care if the speakers have been blocked)"

• Is this normal for XPS 15 9550 screen quality?

  Good evening.

  Last month I bought the XPS 15 9550 with a 4K screen and it had a red tinge in the corners of the display surface, which was visible in a bright room with me, just sitting in front of it. I thought that I have received a defective unit and arranged a replacement through Dell customer support and yesterday I got a new one. However, it has exactly the same problem. To understand what I'm talking about I enclose a picture of the screen. Black background, no external light sources, average brightness.

  

  Smart phone camera exaggerates this effect a little bit but it is still very noticeable to me. I'm talking even on ghosting and consultation of top / sides when black past completely in red, honestly, I could live with it, but that distortions of color at this angle... I expect too much of a £1,800 laptop? It is worth to try another replacement?

  Not normal. RMA and hope for better luck.

• In the preview, is this normal for a series of small to keep opening browser windows?

  When I saw in the Internet Explorer browser, I receive a small string of the browser windows that I need to view my pages I have designed for maximized screen individually. Is this a standard DW Preview in the browser process? I use 4 DW and IE 7.  I have Vista OS with screen resolution 1600 x 1200. All the targets of my pages are fixed empty. I don't want myself or my viewers to be entered through this tedious process when the site is finally online. I have a problem here?

  You know, I get that every once in a while. I think it has more to do with how you last left your browser with something to do with Dreamweaver. Go to your browser, maximize, then shut up. Then open it again and see if it happens great this time.

  And, of course, you can't control what your viewers do with their browser, unless you create these behaviours 'display the new window '. Your behavior window was empty, maybe because you have to first select the thumbnail or text... and then in the behaviors panel, press the "add the behavior." Choose browser window open, etc. etc.

  I think I'm repeating myself

  Yes, those big arms can be pretty average... Let's see, it was a Charles Atlas ad in the back of comics, Yes?

  Beth

• Feature not available on this responsibility for a new custom application

  Hello
  I followed all the steps (with the exception of the concurrent Manager, using the line) described in Metalink Note: 70276.1, 216589.1 and the document titled: "how to integrate applications with custom applications."(à condition que comme une autre Metalink Note, je ne me souviens pas qui dès maintenant...) 11i version ".
  
  The problem occurs when after connecting as a new user created... .lets say XXTEST (with a XXTESTRESP responsibility) calls a function (form). The error message "Feature is not available to this responsibility" occurs...
  
  What I need to do something else... (for example to run the automatic configuration, because I modified the file custom env that was created to set and export the variables in custom applications created)...?
  
  When I source the APPSORA.env file, I get the contents of the env variable: echo $XXTEST_TOP according to the needs...
  /.../.../xxtest/11.5.0
  
  Note: I use EBS 11.5.10
  
  Thank you very much
  SIM

  SIM,

  Did you bounce application services after setting the CUSTOM_TOP in the env file?

• drive hard failure after 2 years of use, is this normal for a 1.6-inch toshiba 80 GB drive

  is the lifetime of a drive hard toshiba mini car shorts... and how to get data back now that the player is without a normal connection only a flat cable...

  In fact, that would be my next suggestion. If you're technical enough, you can use a Linux, or in your case, USB key bootable CD. I have had several instances where do this on a disk failed HARD still allows me to remove some data. Not everything, but it's worth a shot-to-shot, sure! And even if it doesn't work, you still have the USB key to use.

• Transfer data to the new phone

  I upgraded my Iphone 5 to the SE.  AT & T helped me transfer my photos and contacts.  I saved my 5S for my laptop, but do not know how to transfer the data from this backup on my new phone.

  You can make a backup with iTunes after this, put your new devices in iTunes and select this option to restore the backup