iSCSI CdRom Device (Optical) error Code - lack of string: libDapi5.p5p:

Similar Questions

• No audio output device installed: error code: C00D4E84

  I need to install the sound on my pc it says "no audio output device is installed" HELP

  How to install the sound on my pc it says error code: C00D4E84

  Hello

  • Will there be any changes made prior to this issue?
  • The sound card is listed in the Device Manager?

  You can check these links:

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

• 12 Device Manager error code

  Hi all

  I have this error code for all card reading devices Ricoh "insufficient resources".

  Look at one of the devices of connection I have.

  Intel 82801 PCI bridge - 2448 @ F0400000 - F04FFFFF

  and as a subtree, the first camera Ricoh starts with F0400000 - F04007FF

  I thought in uninstalling and reinstalling would get Vista to assign different IO but uninstall the device just gives the BSOD with one of the pilots Ricoh for instance 'rixdptsk.sys '.

  Any thoughts?

  Thank you

  Justin

  Hi Justin,

  Error code 12:

  This device cannot find enough free resources that it can use. If you want to use this device, you will need to disable one of the other devices on this system. (Code 12)

  Cause:

  This error can occur if two devices that are installed on your computer received the same i/o ports, the same interrupt, or the same Direct memory access channel (whether through BIOS, the operating system, or both). This error message can also appear if the BIOS did not allocate enough resources for the device.

  You can use the Troubleshooting Wizard in Device Manager to determine where the conflict is, and then disable the device in conflict.

  Turn off the device in conflict

  a. in the device properties dialog box, click the general tab.

  b. click troubleshoot to start the Troubleshooting Wizard. The wizard will ask a few simple questions and provides a solution to your problem, based on the answers you provide.

  c. follow the resolution steps provided by the wizard to resolve the problem.

  Also check out the following link:

  Code 12: This device cannot find enough free resources that it can use

  http://TechNet.Microsoft.com/en-us/library/cc732199 (v = ws.10) .aspx

  Hope this information helps.

• T61 keyboard inadmissible: Device Manager error code 39

  Of course, I'd appreciate some advice on the treatment of a keyboard device driver error.  Things were fine yesterday, but today, stop the keyboard. Keyboard displays a yellow alert with code 39.  I've uninstalled and reinstalled the driver but it will reinstall with the same alert.code.  I tried a find update but can't find anything more recent Windows.  I looked on the Lenovo download site but haven't seen a keyboard driver.  Couldn't get into safe mode, but does not have msconfig through the keyboard to the diagnostic boot insto mode screen, but the same results.  Any help is greatly appreciated... it seems it shouldn't be so difficult, and of course miss me something obvious.  Thank you

  After abandon it and post my request for help, I found the answer.  Search the Web more upturned one clue which led elsewhere... and I found that an update of Threatfire which I run didn't copy a new tfkbmon.sys of keyboard (used to help in the detection of keylogging apparently) driver in the drivers folder.  Things has worked after updating but the restart was the culprit and I forgot the programme asking to install an update earlier.  Downloaded the file from the TF community forum in the drivers folder and everything is now ready to go.  Thank you

• portable device driver error - code 31

  Gidday everyone,.

  Rig = AMD Athlon II x 4 620 clocked at 2.6 ghz, 2 GB Ram, Win 7 Ultimate 32 bit SP 1 on Asus M4A78

  bios mod-

  config sys: ide to ahci (to improve the rate of the ISF, NCQ; using sata, ide, no raid)

  reset for win 7

  blue screen

  back to ide

  reset

  www for solution - registry mod help:

  KEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\msahci

  CHG of DWORD from 3 to 0

  reboot ok for Win 7

  improve the exchange of data

  started victory day

  installed optional AMD - other materials, Storage Controller - AMD SATA controller,

  published March 2013

  Update said "with success."

  Reboot as required by the update

  Device driver error 31 on portable devices

  (Two) WPD filesystem Volume driver

  :-(

  Active BIOS, no change

  reset

  BIOS - return to the ide

  Restart

  no change, still error 31

  Restored AMD update

  error 31 remains

  hands up in the air

  NB. earlier this year the experience even device driver error 31 on portable devices on portable devices for WPD filesystem Volume driver. Investigations at the time found no solution. However, think has an update of the applied victory since then "arranged" the error. The error was not apparent immediately before the update to AMD.

  Grateful for the help please.

  Have '

  Hello

  Thanks for posting your query in Microsoft Community.

  I understand your concern and will help you solve this problem.

  I suggest you try using the steps described in these Microsoft help articles and check if it helps.

  What to do when a device is not installed correctly
  http://Windows.Microsoft.com/en-us/Windows7/what-to-do-when-a-device-isn ' t-installed-correctly

  Restore a driver with its previous version
  http://Windows.Microsoft.com/en-us/Windows/restore-driver-previous-version#1TC=Windows-7

   

  I hope this helps. If the issue is not resolved, please get back to us and we would be happy to help you.

   

• WAN Miniport device receives error Code 31 in XP

  Problem came to light, when the system would no longer connect to the internet.

  I found that the Miniport network EXTENDED (IPX) device was yellowed out.  I tried to update the drivers using the Windows XP disk.

  You can not remove the device because it indicates that it may be necessary to reboot the system.

  * original title - MiniPort (IPX) Wan gets this error in Device Manager. The device does not work properly because Windows cannot load the drivers required for the device (CODE 31) _ *.

  Go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest XP drivers for it > download/install them.

  The computer you are using now if you have an Internet connection with the other > download / save drivers > copy them into Flash Drive > transfer / install on another computer/laptop.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  Here is the Vista Forums.
  
  See you soon

  Mick Murphy - Microsoft partner

• Get I/O device 0x08078002A error code when you try to backup in Windows 7.

  Original title: backup problem WIN7

  I recently had to replace my HARD drive.  I added an external HDD, IOMEGA Prestige II.   When I ran the backup, there was error: unsuccessful backup.  OS WIN7: I/O device 0x08078002A and Error errorcode internal 0xC003005.

  Hello

  Welcome to the Microsoft Community and thanks for posting the question.

  Looks like you get an error when you try to save.

  Try these steps and check:

  Method 1:

  I suggest you run a Sfc scan on the computer and check.

  a. click Start, type cmd in the Search box, right-click cmd.exe in the programs list, and then click run as administrator.

  If you are prompted for an administrator password or for confirmation, type your password, or click continue.

  b. at a command prompt, type the following command and press ENTER:

  CHKDSK /R

  Collapse this tableauAgrandir this table

  Note	: In this command, is a placeholder that represents the drive letter of the volume you want to check.

  c. press y when you are prompted to check the drive the next time the system restarts.

  d. close all applications and restart the computer.

   
  The collapse of this Expand table this table

  Note:

  When you restart, Windows checks the drive for errors, and then Windows starts.

  e. after the computer restarts, repeat steps 1 through 4 for the other volume and try the backup operation again.

  Method 2:

  SFC scanner on the computer to ensure that the system files are intact:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Hope this information helps. If you have any other questions feel free to respond and we will be happy to help.

• DVD/CD player - 52 Device Manager error code

  This message - computer can't find the DVD/CD player:

  Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or maybe it's a malicious software from an unknown source. (Code 52)

  Try following the steps under "Windows 7 or Windows Vista" in the MS KB article:

  http://support.Microsoft.com/kb/982116

  These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.

  Create a System Restore Point beforehand and restart the computer later.

• Satellite A80 - in ODD device with the code 39 error Manager

  Hello

  I have a Satellite A80 127. I have a problem with my CD player.

  When I tried to upgrade my XP Home Edition of XP Pro SP2, display said the restart that he couldn't play in my CD player. During the inspection, I found that my CD/DVD drive is unable to read CDs if it can read the DVD. From what I remember, it was working fine a few days before.

  I tried to locate the source of the problem and with the option of troubleshooting, I found that I have a yellow exclamation mark against my SCSI/RAID host controller in my device (with error code 39) Manager. I could not update the driver it give me an error message. In addition, there was a controller SCSI/RAID of Nero. I tried to remove to check if the main works, but always without success.

  Any suggestion would be great, and in the meantime I'll try to find similar topics.

  Thank you
  knockaert

  Hello

  Check this thread http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=111441 please

  Good bye

• HP DVD A DS8A8SH device. CdRom SATA stopped working code 19

  MY HP laptop has a problem.  The DVD drive has stopped working.

  HP DVD a Beltway. DS8A8SH SATA CdRom

  An error code 19 registry error.

  I use CCleaner for registry error and have reinstalled the driver, but none solved the problem.

  Can someone please?

  Thank you

  Hello

  Try to follow the procedure at the title of the subheading 'Manually set the registry entries corrupted' on the link below to remove the upper and lower filters and see if that helps the issue.

  http://support.Microsoft.com/kb/982116

  Kind regards

  DP - K

• Windows Vista Home Premiun auto restoration and backup; Save the error code: i/o device error (0x8007045D), file backup complete normar will not complete successfully.

  Device error Code: i/o Device (08007045D) error Code... trying to make a backup of normal file that goes all the way and then produces this error code.

  Hey Rodney,
   
  To resolve this issue, follow these steps:
  1. Click Start, type cmd in the start search box, right-click cmd.exe in the list programs and then click Run as administrator.
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
  2. at a command prompt, type the following command and press ENTER: Chkdsk/r X:
  Note: In this command, x is a placeholder that represents the drive letter of the volume you want to check.
  3. press y when you are prompted to check the drive the next time the system restarts.
  4. close all applications and restart the computer.
  Note: When you restart, Windows checks the drive for errors, and then Windows starts.
  5. after the computer restarts, repeat steps 1 through 4 for the other volume and try the backup operation again.
   
  For more information, see this article: http://support.microsoft.com/kb/952272
   
  I hope this helps.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• When you transfer overdrive mp3 audiobook, receive the OxCOOD2772 error code

  When att. to transfer overdrive mp3 audiobook, "has a problem OCC in obt. OxCOOD2772 of devices CERT error code. ».

  This error message may indicate that your device cannot access the DRM protected WMA files. In order to play the WMA titles, your mobile device must be able to play Digital Rights Management (DRM) WMA files - not only WMA protected files.

• disabled (ERROR CODE 400) graphics card

  I run Windows Ultimate 64 bit on my desk, which has an ASRock ALiveXFire-eSATA2

  Motherboard.

  I have a card graphics Palit GeForce 610.

  Attempt to upgrade my results 2 Mg memory of the graphics card being extinguished by Windows with a 40 Device Manager error Code.

  I downloaded the latest drivers from the website of Palit, which does not help.

  Any advice would be much appreciated

  Then contact the essential medium

  PS They were modules of 'value', I saw problems with these timeings memory of requireing bios be reset according to the crucial recommendations specific to your motherboard

• HP Pavilion 23 "TouchSmart: optical drive error Code 19

  Hi, the optical drive in my HP Pavilion TouchSmart 23 "does not work correctly. In Device Manager it says that it is the result of the conifguration in the registry being incomplete or damaged (error code 19), but I can't solve the problem. I tried to solve by updates driver and verification for the top and bottom filters using regedit, but none of those who were present. I can't find any other possible solutions anywhere. Thanks for the help.

  Hello:

  The only suggestion I can offer would be to go through the troubleshooting steps in the link below you haven't tried.

  https://support.Microsoft.com/en-us/KB/314060

• receive an error code 41 on my two optical drives.

  When in Device Manager it shows me error 41, but does not show me the fix. Am went to the OEM website, thinking that maybe I need drivers updated, but it says I have the latest drivers. Tried to disable, and then click Restart, and then activated. Did not work. Tried to uninstall, then restart, reinstalled, but also told me that the drivers have been installed, but no material was found. Even checked the boot order in the bios to make sure they were still on the list, they are. So now that?

  Hi MaryStreeter,
   
  -What is the brand and model of the optical readers that you use?

  Error code 41: this problem occurs if you install a non-Plug-and-Play device driver, but Windows cannot find the device.

  For more information, see:

  Explanation of error codes generated by Device Manager in Windows XP Professional

  Try the steps listed in the section "Let me fix it myself" from this link to fix the problem:

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756   how to back up and restore the registry in Windows

  Your CD or DVD drive is missing or is not recognized by Windows or other programs