ISE: Change of lifestyle politics

Similar Questions

• Cisco ISE change of domain name

  Our deployment ISE has been setup with our internal domain of csi.corp, during the presentation of the CWA guest is the domain name it is presented to the

  the prompt.  We would like to make this on the public domain and a valid certificate.  From what I have gathered that the https web portal certificate must contain the name of a field FULL of the ISE node, so I need to change the domain name on the server.  I found messages that some have changed the domain name after deployment without negative results, is this possible?  We are currently integrated with our AD Corp. and capable of using that EAP authentications.  We have 2 knots in our deployment, is it possible to change the name of our public domain without a reconstruction?

  Thank you

  Joe

  Wow, this is an old thread, but I'm glad that he still provides help others :)

  wyfy-2015 - thanks for the compliment!

  joeharb - thank you for taking the time to come back and post info on this (+ 5 from me as well).

  Now, if this problem has been solved, we mark the thread as "answered" ;)

  Thank you for evaluating useful messages!

• Begin the AAA Infrastructure with ISE

  Hello

  I configured Authc and Authz policy as follows:

  Authc:

  If Virtual Radius-NAS-Port-Type is equal to the default network access and use AD

  Authz:

  If Radius-NAS-Port-Type is equal to virtual

  AND the specific AD user group

  then the profile Authz permissions (Cisco av-pair = NCS:role0 = root and NCS: virtual-domain0 = ROOT-DOMAIN)

  I am able to authenticate successfully and authorization authorization is applied and I can see what the authentication logs, but after that it seems what ISE goes back to politics of authentication by default to deny access.

  Please someone explain why this failure as the premium Administrator's guide is not the correct configuration steps.

  For my result of authorization in ISE for PI profile, I use the following syntax:

  Access type = ACCESS_ACCEPT
  Cisco-av-pair = NCS: virtual-domain0 = ROOT-DOMAIN
  Cisco-av-pair = NCS:role0 = root

  Now, you obviously need to change this, if you have several virtual domains in PI. It looks like what you use.

  My successful connection is indicated below (however I do not see the virtual port type):

  Timestamp of source	2015-03-03 10:23:56.123
  Receipt of timestamp	2015-03-03 10:23:56.123
  Policy Server	MYISESERVER
  Event	5200 successful authentication
  Reason for failure
  Resolution
  First cause
  Username	mycoolusername
  Type of user
  ID of the endpoint
  Profile of endpoint
  IP address
  Identity store	MYADIDENTITYSTORE
  Membership group
  ID of Session verification
  Authentication method	PAP_ASCII
  Authentication Protocol	PAP_ASCII
  Type of service
  Network device	PISERVERNAME
  Type of device	Network management
  Location	Head office
  The IP address of the NAS	ADDRESS-IP-IP
  NAS Port ID
  NAS Port Type
  The authorization profile	Cisco-Prime-Infrastructure
  Status of the posture	NotApplicable
  Security group
  Response time	19

  Try to take the port type = virtual in your authorization profile config. I only see the port type = virtual in authentication.

• Tecra M11 - 12 p: Win 7 64 bit Fingerprint Remotedesktop AutoLogon question

  With installed last Fingerprintsoftware I have to type in username and password after you connect to the computer via RemoteDesktop since an other PC Win7.

  The feature RemoteDesktop "AutoConnect" (typed at the source-pc credentials) does not work.
  After uninstalling Fingerprintsoftware, everything works well as with any other PC Win7.

  Anyone can confirm this Bug or has a solution?
  Changes in local politics do not fix the problem.

  Hello

  I think that you are the first one here in the forums who try to use fingerprints via RemoteDesktop connection.
  To be honest, I've never used this combination and so I can't tell if it of a bug or feature.

  However, I found new software of fingerprint on the European driver Toshiba page:
  Fingerprint software for Win 64 bit * v1.0.2.29 *.

  I recommend the update of this tool.

• How many times can I use the Dell restore cd that came with my system?

  I ran the cd of restoration over 3 times and nothing has changed that I have I'm restoring an old dell dimension xp. I thought that this would erase it clean and set of parameters by default now I can't boot the OS and not much has changed. I get a blue screen with an error message window was closed to protect the computer and search for viruis.  I found my way in the tree view of the symptoms and I've been running tests, I don't know if this will help, and I still really need help because I am very new to the use of this forum, and now I'm tender hand on this Mac laptop. Boy, any help would be greatly appreciated this whole thing with computers, it's a change of lifestyle.

  A Dell Dimension 4700 Series are of desktop computers; and, as such, do not come with wireless capabilities.

  Connect with an Ethernet cable to your router.

  If you want to use a wireless connection with it, you must either purchase a Wireless USB adapter or a card PCI of Wirelesss.

  Here is an example of both:

  USB adapter: http://www.dlink.com/products/?pid=722

  PCI Wireless Card: http://www.ebay.com/sch/i.html?_nkw=wireless+PCI+card

  And here's all the information from Dell on Dell Dimension 4700 series.

  http://support.Dell.com/support/eDOCS/systems/dim4700/en/OM/Y69490LRs.PDF

  And it can help, too (Service Manual):

  http://support.Dell.com/support/eDOCS/systems/dim4700/SM/index.htm

  See you soon.

  PS You are welcome, the ROCKS of XP

• Order of port re-auth authentication and switch / stop of the session

  Hi all

  We are implementing an ISE (1,4) and met regarded questions on the agenda of the authentication and a stop of the session after posture in line. We got mab, dot1x as authentication order (priority of authentication is set to dot1x, mab). We have configured a reauthentication in the ports of the switch. Windows uses begging all-connect NAM (see 4.2) to dot1x and posture. During the re-authentication, either all-connecting NAM or switch does not start an eapol start and switch allows the session to the MAB, where - as when seen dot1x and mab authentication switch order generates eapol start. The switches are 3750 (15.0 (2) SE8).

  Any possibility we could force the switch/NAM agent sent an eapol start during re-auth?

  Regarding the posture, posture once conform for an endpoint (after dot1x authentication passes) following a judgment of the ISE manual session for an endpoint, switch creates a new session in ISE changes and switch the State of the unknown port to posture. Posture ise AC client still shows status of complaint of posture in the endpoint. It seems do not know about the stop of the session. During NAM endpoint agent session performs a re-auth component however posture remains unchanged "in line".

  Does anyone have experience this problem?.

  Thanks in advance.

  Concerning

  GA

  Hi Gaj-

  I had the similar problem in the past and for setting the following attribute:

  Termination-action-AVPair attribute modifier = 1

  Give that a go and let us know if you still have any questions.

  Thank you for evaluating useful messages!

• Some planning reviews don't show all the data. "no data to display.

  Hello

  As I changed the policy for oversized VM, planning does not seem to work.

  For example, I have 6 power VM off, but in the planning - views - Machine virtual Powered-Off, I have nothing other than a small text at the bottom: "no data to display.

  

  As you can see on the left of the screenshot, I have a few VM power - off, and I guess that Vcops know because it display the logo "off voltage VM', but still, to planning - finds out, he does not list these VM.

  I don't know if it's because I change politics for oversized VM, but I put back it by default, and the problem is still there.

  Thanks in advance for your help.

  (And sorry if my English is approximate)

  Sorry, I did not explain my problem very clearly:

  The engine out of sight the listed me, some VM before I get a parameter to the default value of policy, but then: no VM more not listed in the display. Even after you return, I changed this setting to normal, the virtual machine has not p showed in the sight of power off.

  But still, the problem is "solved", it works now, I just had to wait. I think that Vcops recalculat every thing when you change something in politics, and it took more time than I have.

  In any case, thanks mark.j

• Case Rotobrush & mask Keyframe Question

  Hello

  I wanted to just make sure that the sample here is a case of Rotobrush.  Of course I've never used before, but I want to retain the color, (excuse the mask of shit), I created in the water in the first shot, of the sequence of cuts throughout.  When the woman is moving on the aquarium, I'll need to rotoscope it correct?  Any tips?  However, I will be reading the manual!

  http://Vimeo.com/39579490

  And the mask question - I should know this, but for some reason, (in another comp), my rearranged mask shape helene.  It was the same tank that you see above, but it was a dolly shot and the tank has not changed shape!  You will laugh but I ended up resetting the points of mask in 291 frames, and it still does not like variations in forms of mask created a flicker after applying the correction of color, levels etc..

  I wouldn't be able to go to the end of the model.  Draw the shape of the mask I want, keyframe mask shape; then go at the beginning of the comp - set the position of the mask and the keyframe again.  Please tell me where I'm wrong!

  And; is there a way to keyframe a "transformation" of the shape of the mask over time?  Basically, change the size and shape of the mask, I couldn't make this image by image.

  As always, many thanks for all the advice, patience and knowledge.

  Best,

  Jesse

  Tops is just another word for anchor points / nodes in the path. Not sure I understand the rest of your post this late in the evening. My brain is pretty chewed... You can move masks in their entirety by double-clicking on. This will call up the free transform box. Therefore, it would be a simple way to keep all proportion. AE can have an infinite number of masks per layer (well 9999 or so at least) and they even Boolean modes for more fantasy. This is not different from that of PS, in fact its even more versatile since you can reorder the masks and change their lifestyles without invoking obscure keyboard shortcuts. I recommend that you look that up in help. During the follow-up, you would connect the solid position, since points in AE mask themselves are not easy to follow. Yet once, find it in the help or study a good tutorial (such as Mathias Möhl).

  Mylenium

• Change password for local administrator on Cisco ISE in distributed deployment

  Hi guys,.

  I managed four ISEs of Cisco in a distributed environment.

  First ISE is the Admin, second ISE is followed, the third and fourth are the PSN.

  We use local authentication. We want to change the password for the admin user name.

  -What does that by a lucky break the connection between the ISEs or will be the new password pushed to each of them?

  There is no possibility to change the passwords on the PSN as the administration tab is not available.

  I know that when I create a new user, he's pushed all ISEs.

  Thank you.

  Serge.

  Serge,

  Good question.  Once I read this question, I had to know, so I tried this in my lab.

  I changed the admin password and change successfully, I had to connect to ISE using the new password.  Then I noticed on my dashboard to my node communication school admin and my PSN was green.  YAY.  I went to the page of deployments and could access the configurations for the nodes.

  Trust, I logged the secondary node using the NEW PASSWORD.  So, Yes, not only communication does NOT break, the new password is pushed down to all nodes.

  Please rate useful messages and mark this question as answered if, in fact, does that answer your question.  Otherwise, feel free to post additional questions.

  Charles Moreton

• ISE Admin CLI password change

  Hello Experts,

  Recently, I changed my EHT Admin password, now I can connect to the ISE of GUI with the new password, but I can not connect to it through CLI or using old/new password.  I tried to change the GUI mode admin password again, but still I can not connect to ISE by CLI.

  Any help please...

  ISE got Admin GUI and CLI accounts are separate accounts.  Passwords are synchronized during the initial installation.  All other times, it must be done manually.

  The unique password which can be changed via the GUI is the password for the Admin GUI.

  The two passwords can be changed in CLI, but with very different commands.

  To change the password of Admin CLI, simply enter the command password

  To change the password of Admin's GUI, the command is reset-passwd newpassword admin ise application

  However, in your case, you must boot from the DVD of the ISE (or iso, if virtual) and select option 3 or 4 depending on your situation.

  

  Please rate useful messages and mark this question as answered if, in fact, does that answer your question.  Otherwise, feel free to post additional questions.

  Charles Moreton

• Users cannot change password for 802.1 x and implementation of ISE

  Hi all

  We have implemented cisco ISE 1.1 for a week and we notice that Microsoft active directory the user cannot change password there when it expired.

  We store all user account in Microsoft active directory for authentication and ISE is mapped with Microsoft active directory. Normally, when your expired password Microsoft active directory ask you to change your password, but in our case cisco switch or 802. 1 x do not allow communication with active directory before giving access to the network. Is this a configuration error or cisco do not support this?

  Best regards.

  Hello

  I have the same problem, did you find a solution?

  Thank you

• Changing IP after ISE CoA

  I've heard of this problem before, but am not sure of how to stop it...

  Client connects to the switch, switch contacts ISE on the backend. Client gets the IP address on VLAN 30 in the meantime. ISE determines the customer belongs to VLAN 60 and performs the CoA. Switch change VLAN, but the customer is always an IP to VLAN 30.

  Someone at - it a good way to stop this? The only thing I've heard is to put a pre authorization ACL on port denying DHCP. But I'm having issues even getting this to work.

  Thank you.

  I've had this problem before and have posted on similar topics. I have never tried DHCP with an ACL of blocking, but it would be interesting to know if it will work. I see two problems with it if:

  1. the ability to use the critical auth VLAN in the case of ISE descending is not really an option unless you use the cat 3850 s or 3750 with IP Services where you can use a script to EEM to remove the ACL of pre approval. In the case otherwise, even if ports are allowed, it is not Radius Server to push a dACL to replace the ACL of pre approval

  2. I like to use the flow of comments/CWA when 802.1 x and MAB fail. Of course, this requires an IP address

  3. a lot of good information for profiling are obtained by DHCP.

  In the past, I used the static IP on these devices, and that seems to work ok. Overall, I really don't like the substitution VLAN dynamic for this exact reason. That's why I recommend just letting everyone on the VLAN by default and restrict access via the ACL or DACL on the L3 interfaces. If an additional segmentation is needed, you can always go to SGT/SGA :)

  Thank you for evaluating useful messages!

• ISE and AD Password expiry Notification and allow the user to change

  We are almost ready to chat live with ISE for our VPN users.

  One last thing that has been requested is, how can we ISE prompt a user when their AD password is about to expire and give them the opportunity to change it at this time here?

  I know that the ASA has the ability, if it performs authentication directly against the AD, but that the feature goes away with the IPN. So what settings are there to encourage users who connect via Anyconnect to the ASA VPN by ISE?

  We don't have any ISE Setup for internal/system users and yet, it's strictly a VPN configuration only for now.

  Thank you

  Dirk

  Yes, that's what I said in the first post.

  Since then, we use Protocol radius for password expiry notification will not occur.

  You will get a pop-up window that password is expired, please change.

  Jatin kone
  -Does the rate of useful messages-

• Change of IP address for Administration ISE 1.2 nodes?

  Hello world.

  Currently, I don't have the means to simulate this (it would be to create multiple virtual machines to test and I do not have access to this space memory and hard drive to do).

  I have currently deployed an ISE 6 knots, with 2 Central nodes configuration (Administration and monitoring), and 4 NHPS scattered around the country.

  The customer needs to move the hubs of their data center, and it will be to change the IPS for both nodes.

  What are the steps to do this? I've searched and couldn't find anything conclusive.

  My idea is this:

  1. take the secondary node and cancel the registration of the deployment.

  2 change the secondary ip address (cert regenerate if necessary)

  3. change the DNS record for the node admin secondary

  4. secondary displacement in the data center

  5. turn on the node admin secondary

  6 register admin secondary node

  7. to promote the admin school primary node

  8. repeat the steps for the primary (now secondary) node.

  Of course, in the meantime I have to change the IP addresses for servers RADIUS on all WLC and switches.

  Will this work?  Are there additional aspects that I need?

  Thanks in advance.

  Dear Sir

  Your proposed plan seems logical, but you must take care of the following:

  "If you have saved a secondary node of the Administration (the main new) after registering secondary nodes of Cisco political ISE of Service and monitoring, you must restart the secondary Cisco ISE nodes that were saved before the secondary management node was registered."

  City of ... http://www.cisco.com/c/en/us/td/docs/security/ise/1-2/user_guide/ise_use.

  Thus, after step 7, you need to restart the Ssnp 4 to communicate with the administrator AGAIN.

• Using ISE to dynamic change of VLAN

  Hi all

  I need help to dynamically change the VLAN on each port of my Catalyst 3560, to do this, I don't want to use the MAC address filtering, but I want to use conditions already in place in my ISE to port between two VLAN (comments and Corporate) where they give free on the corporate LAN and the other Internet access LAN switch.

  Maybe someone of you had might have some ideas to do this using, or perhaps without VLAN?

  PS: Sorry for my bad English, I'm not native English ;)

  Thank you in advance.

  I don't understand exactly what you are looking for... But still

  The two types of access you plan can be achieved anyway

  Display the VLAN: as explained you... you must create two differnent authorization policies according to the users belonging to the Group of (AD) ...

  dACL: you can push downloadable ACLs to change according to the membership of users in AD.

  Let me know if you need help, design or configuration point of view...