isForeground () does not properly in the firmware 4.6 and bellows

Similar Questions

• Serial number does not work after the transfer of OSX and apps for the new Macbook Pro

  My serial number does not work after the transfer of applications and OS X for my new Mac.  Although the Adobe specifications say it is compatible with the older OS X, it does not seem to have no compatibility issues because

  -My old Macbook Pro has Yosemite and was fully running CS5 Web premium without a problem.

  -My new computer has the same * exact * OS X transferred in which the suite was fully functional with the trial.

  A support of top-level, software engineer, or someone who takes care of the soap operas could

  -Please provide a number of test series to test with?

  - And/or activate my series?

  - Or show how to disable the publication series on the old disk hard if I can't use the old computer?  So that I can use with the new computer?

  I chatted with technical support that keeps saying that it's a compatibility problem, to install with old OS X or buy a newer version. But I know that CS5 works with Yosemite (as I use it myself), and the only question I had is that serial # says invalid, which is separate from the functionality of the program.

  I'd rather not spend hundreds more to get a new suite, when I spent a lot for CS5 already and know is fully functional on Yosemite.  I have also not return to an older operating system and break things.

  Moreover, I used to be a general technical Support and I am a coder of web applications, so I understand that this isn't just some sort of "reboot" of the question

  No info to solve this, or a means to achieve at the highest level Tech support, would be greatly appreciated!

  Thank you!

  Transferred apps will certainly question of activation, because licenses files creation is completely dependent on machine, it willl created according to the particular Machine ID, if you transfer the application from one computer to another, there is incompatibility.

  Therefore, it is very necessary that you are using the original installation media.

  Download the CS5 products

  If you do not agree with the process of removing and reinstalling, try wiping the contents of SLCache and rename the SLStore folder.

  
  

  WARNING: Do not forget once erase you the contents of this folder, all Adobe applications will ask the new license or re-enter the serial number.

  Location: /Library/Application Support / Adobe.

  It is strictly recommended to install Adobe applications using the original installation media.

• XML with a member does not properly in the data model

  I use XmlDataAccess class to load an XML list in GroupDataModel. Everything works fine if the XML file has more than one Member, however, it does not load if the list contains a single member. I use the following code to get the XML content:

  QVariant list = xda.load(home.absoluteFilePath("MembersList.xml"),"/members/member");
  

  I need to know if the list has only one or 2 + members, so I can direct the data model to load with the appropriate settings. Can I know the number of members in the list?

  This problem is closely related to this question, where a solution QML is given.

  Hi Mitch99,

  Please see this forum post for a workaround for this problem. I tested it and confirm that it works as with QML.

• 4.0 ai2 - automatic adjustment does not properly in the result of the query grid

  Hello

  in 4.0 ai2 automatic adjustment does not work in the result of the query grid.

  Rather than shrink the columns to the narrower size taking into account topics and content (see 3.2), it auto ' enlarged to fit the entire grid of data query.

  She looks worse and makes it harder to see results at a glance.

  Bug and will be fixed for the release of v4.

• Satellite A100: CD/DVD drive does not appear in the Manager of peripherals and BIOS

  The CD/DVD drive does not appear in the window manager and I can't incert CD
  The BIOS displays "none" instead of "optical device".

  This means that the CD device is dead?

  Hey Micky,

  Unfortunately it's probably :-(. You can try to remove the optical drive and then reinsert it into Notepad, and then marketing and see if it is recognized as a new device.

  Check also that it is not displayed in Device Manager and if it is remove before trying the above.

  Kind regards

• My macbook does not open? The screen is white and the bar hangs?

  My macbook does not? I try to open it and it freezes on the gray screen?

  You can try in this order. SMC reset https://support.apple.com/en-us/HT201295 reset Pram.  https://support.Apple.com/en-us/HT204063 secure boot. Hold down the SHIFT key at startup. https://support.Apple.com/en-us/HT201262 or in single user mode. http://www.cultofmac.com/240390/use-single-user-mode-to-solve-wonky-mac-os-x-iss Siu-os-x-advice / http://www.cultofmac.com/240390/use-single-user-mode-to-solve-wonky-mac-os-x-iss Siu-os-x-advice / If none of this works, you will need the installation to your computer disk. If you have not installed to 10.6.6. You will need to insert the disc into the optical drive at startup by holding down the C key. You can run the disc utilities form here or if you need to do a reinstall. If you have a newer operating system. Start with the R command to get into recovery and do the same things.

• My Explorer Microsoft touch does not connect to the computer (Win 8 and 7 or iMac)

  I bought a touch of Explorer Microsoft wireless mouse and cannot understand why the mouse does not connect. The small usb dongle is recognized and the mouse turns works. The optical light is blue and the touch sensor clicks when I run my finger on it. Nothing happens when I press any button of the mouse (without interaction with the computer). It almost seems like its not even connected to the usb dongle. I tried to find out what's wrong with it or with Windows. The mouse itself doesn't simply plug the usb dongle or on the computer at all. It is not a Bluetooth mouse, so there is no button to connect or sync.

  Hello

  As it seems to be a hardware problem, you can check the link for the Microsoft Hardware supported:

  http://www.Microsoft.com/hardware/en-in/support

• fonts Mathematica does not properly after the senior at el capitan

  I used Mathematica 5.2 on my MBP with Mountain Lion. After the upgrade to El Capitan, there is a problem loading the fonts and Mathematica does not load correctly. Any ideas? Wolfram has a package of fonts, but don't know what fonts to download or how to install them on my MBP. Any ideas?

  Please, back up all data before proceeding.

  Launch the application book fonts and validate all the fonts. You must select the fonts in order to validate them. See the built-in Help and support article for instructions. If the font book detects any problems, solve them.

  Start in safe mode rebuild the font caches. Restart as usual and test.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or the boot volume is a software RAID, you cannot start in safe mode. In this case, ask for instructions.

  If you still have problems, then in the font book menu bar, select

  The file restore Standard ▹ fonts...

  You will be prompted to confirm and then enter your administrator login password.

  Also note that if you disable or remove built-in fonts, for example by using a third-party font manager, the system may become unstable.

• Update panels does not properly since the 2015.2.1

  My sidebar panels does not work properly since the update. Hit the tab key does not hide the sidebar: sidebar remains visible. Also, sometimes I can't access the menu bar, or change view (shift f command).

  On the retina mi Macbook Pro, OS X 10.11 2015.

  I drove back to 6 and are no longer problems. Any suggestions on how to upgrade to the current version without problems?

  Make sure that you are on 6.1.1 the latest stable version.  Help > system information to check your version.  See these instructions if you are not on 6.1.1: http://www.lightroomqueen.com/how-do-i-roll-back-to-lightroom-2015-1-1-or-lightroom-6-1-1/.  6.1.1 LR has some important bug fixes to 6.0 which has affected a large number of people.

  Adobe has apologized for the mess in LR CC 2015.2 / 6.2: update of Lightroom 6.2 Release and apologies, update of Lightroom Import 6.2. So don't waste your time trying to get 6.2.1 work - wait for 6.3 and let others do the beta testing.

• HP pavilion ab027tx 15: Equalizer b & o does not properly after the update of windows 10

  I've updated to windows 10. .and I have installed the latest driver realtek audio on my laptop from the HP website.

  The B & play 0 appears in the control panel and list of icons. But I am not able to change the mode(music/voice/movie) in the room B & O when you listen to music and watch YouTube etc .i have reinstalled the driver realtek audio, but the same problem appears. Please tell the solution for this problem

  It does not work when I use my headset

  Hi there @pavan_014.

  Thank you for visiting the Forums HP's Support and welcome! I think the problem you are having is your sound and headphones since the Windows 10 upgrade.

  Note Remove all USB devices. Disconnect all devices of non-essential, as these can cause some problems.

  Although you had already uploaded/updated new drivers, I would suggest trying to uninstall all the drivers of its current:

  • Go to the Device Manager
  • Click sound, video and game controllers
  • Right-click on the audio driver
  • Click on uninstall
  • Restart your computer laptop twice
  • Try the speakers

  You can use the HP Support Assistant's drivers. Here is a link to the HP Support Assistant, if you need it. Simply download and run the application and it will help with the software and drivers on your system that need updated for Windows 10.

  Are - what you happened to try the audio Troubleshooter? It might be able to solve your problem automatically.

  You can find the great troubleshooting steps in document No. sound from speakers as well as resolution of the headphones and headset problems. This document contains several troubleshooting steps that may prove useful.

  Please follow provided the troubleshooting steps, re-post and let me know the detailed results of the troubleshooting.

  Thank you!

  Have a great day!

• WLan / WiFi works does not properly on the Satellite C55C-C-16f

  Hello

  I just bought the laptop toshiba Toshiba Satellite C55C-C-16f mentioned in the title, and there seems to be something wrong with the WiFi adapter.

  Sometimes it connects to the WiFi, but most often, when I start the computer (whether by or stand when it is off), it finds no network and cannot connect to my WiFi router. Usually, when I restart the computer all of a sudden does ot connects to the network. I tried the filming of standard Windows problems, but it can not find problems or repair.

  I hope you can help!

  Best regards

  I just have the same problem with my new ray. If I have more than 2 m from the router, the reception is 1 bar. Most often the laptop can't find any network.
  I tried to put maximum performance in energy saving mode, but it doesn't change anything...

• Play Lenovo Vibe K4 Note mobile store does not properly after the recent update...

  After the last update, my game store does not work correctly. A lot of apps is not proceed with the installation an error...

  Help, please

  Hi Digambar,

  Welcome to the community of Lenovo!

  Please perform the below mentioned the troubleshooting for the troubleshooting steps:

  1. go to settings--> Apps--> all Apps-> Google Playstore: clear the Cache, erase the data
  Note: All browsing history will be get deleted.
  2. If the problem is persists kindly update the playstore Google later.
  3. make sure that the update of the system is up-to-date.

  Please come back to us if the trobleshooting helped you.

  Thank you & best regards

• 6921 IPPhone does not register after the firmware update

  Hi all

  We try to update the firmware 6921 phones.

  We have CUCM system version: 8.0.3.20000 - 2

  Current firmware on the phones of SCCPS 6921 is SCCP69xx.9 - 0-3-0.

  We tried to upgrade to SCCP69xx.9 - 4-1-3 SR 1, but the phone will not register with this firmware.

  As we modernize cucm to 10.5 (1), we woud would have all put phones upgraded to the version of the firmware shipped with cucm 10.5 (1) before the cut above miniimize downtime.

  Any suggestions will be helpful on how to solve this problem.

  Thanks in advance

  Hi Ravi,

  I guess you have to download the Pack of the device if you want to use 9.4 (1) SR1

  9.4 release notes (1) SR1 say that

  Before installing the version, check that the device Package Cisco Unified Communications Manager is installed

  http://www.Cisco.com/c/en/us/TD/docs/voice_ip_comm/cuipph/6900_series/firmware/9-4-1-SR1/Release_Notes/P690_BK_6AA8901D_00_6900-series-release-notes-9_4_1sr1.PDF

  Now if I see the Compatibility Pack device matrix, it's for CUCM 8.5 (1), but in your case, call Manager version is 8.0.3.20000 - 2

  http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/compat/matrix/CMDP_BK_CCBDA741_00_cucm-device-package-compatibility-matrix/CMDP_BK_CCBDA741_00_cucm-device-package-compatibility-matrix_chapter_00.html#CMDP_RF_C6E2BC42_00

  regds,

  Aman

• layout does not properly when the phone is in landscape mode

  Hello everyone,

  I created a Web page with 3 different configurations: desktop, Tablet and phone. Each presentation has several breakpoints. For example, the available phone has 2 breakpoints, at 375 px and 667 px.

  I've published on businesscatalyst. When I open the page with my iPhone portrait 6 mode, it works fine, but when I turn my phone horizontally, in landscape mode, everything is misplaced. The layout of phone 667 px does not appear.

  Any ideas why this is and how to fix it?

  Is it necessary to make 3 different models, for each device, or can I just do a desktop with several breakpoints layout, corresponding to the fixed and mobile devices? If I do this, my page will be considered by Google 'sensitive '?

  Thank you all,.

  Anne

  Hello Mimi_furnicutza,

  What Muse version do you use?

  If you use (pre-release) version beta Muse then I advise you to this post on the forum dedicated to the pre-release version.

  Adobe Muse Private Beta Program

  Kind regards

  Vivek

• For each does not properly in the XSLT file to two loops on a single node

  Hi all
  
  I'm transforming 2 inputs to a single target using XSLT. Both of the target entry of the same pattern and have the child element.
  In the XSLT, I gave this condition.
  "< xsl: for each select="$Variable1.payload/ns1:BookStore/ns1:Books ">
  < xsl: for-each select = "/ ns1:BookStore / ns1:Books" >
  "< xsl: if test="$Variable1.payload/ns1:BookStore/ns1:Books/ns3:BookId = ns3:Books / ns3:BookId ">
  
  My second for each does not work and in the target, I'm getting double elements. Help, please. Here are two xml source and xml desired target.
  1 XML source:
  
  < bookStore >
  < book >
  Name1 < name > < / name >
  author1 < author > < / author >
  < ID > 1 < / BookId >
  < quantity > 2 < / quantity >
  < price > < price / >
  < status > < / status >
  < book >
  < book >
  name2 < name > < / name >
  Author2 < author > < / author >
  < ID > 2 < / BookId >
  < quantity > 2 < / quantity >
  < price > < price / >
  < status > < / status >
  < book >
  < book >
  < name > NAME3 < / name >
  author of 3 < author > < / author >
  < ID > 3 < / BookId >
  < quantity > 2 < / quantity >
  < price > < price / >
  < status > < / status >
  < book >
  < / book >
  
  XML source 2:
  
  < bookStore >
  < book >
  < name > < / name >
  < author > < / author >
  < quantity > < / quantity >
  < ID > 1 < / BookId >
  < price > 100 < / price >
  < status > < / status >
  < book >
  < book >
  < name > < / name >
  < author > < / author >
  < quantity > < / quantity >
  < ID > 2 < / BookId >
  < price > 200 < / price >
  < status > NA < / status >
  < book >
  < book >
  < name > < / name >
  < author > < / author >
  < quantity > < / quantity >
  < ID > 3 < / BookId >
  < price > 300 < / price >
  < status > < / status >
  < book >
  < / book >
  
  Desired target XML:
  
  < bookStore >
  < book >
  Name1 < name > < / name >
  author1 < author > < / author >
  < ID > 1 < / BookId >
  < quantity > 2 < / quantity >
  < price > 100 < / price >
  < status > < / status >
  < book >
  < book >
  name2 < name > < / name >
  Author2 < author > < / author >
  < ID > 2 < / BookId >
  < quantity > 2 < / quantity >
  < price > 200 < / price >
  < status > NA < / status >
  < book >
  < book >
  < name > NAME3 < / name >
  author of 3 < author > < / author >
  < ID > 3 < / BookId >
  < quantity > 2 < / quantity >
  < price > 300 < / price >
  < status > < / status >
  < book >
  < / book >
  
  Thank you

  Hello

  It will not work like that... To do something like the following... Only one for each...

  
    
    
      ns1:Name
      ns1:Author
      ns1:BookId
      $Variable1.payload/ns1:BookStore/ns1:Books[ns1:BookId = $bookId]/Quantity
      $Variable1.payload/ns1:BookStore/ns1:Books[ns1:BookId = $bookId]/Price
      $Variable1.payload/ns1:BookStore/ns1:Books[ns1:BookId = $bookId]/Status
    
  
  

  I don't have to check the syntax, but you get the idea...

  I hope this helps...

  See you soon,.
  Vlad