ISO image does not start

Similar Questions

• ISO vSphere does not start

  Hello

  I try to install vsphere on a new system with a card mother Gigabyte GA-X58A and I don't get too far at this point...  The situation is that when I try to boot from the DVD that contains the standard iso esxi, nothing happens.  I have a fast blink, no screen change, nada.  I am able to start a Win7 disc from the same machine and I am also able to load the iso (disk mounted) esxi in a VM and windows startup.  So I confirmed the iso esxi is functional and the system with the Gigabyte card starts a dvd but I am at a loss of what be it further.  I'm a noob to virtualization (if it isn't already obvious enough ) and I would appreciate any input from more experienced.

  Thank you

  Lefty29er

  You will need to find a piece of software to burn the image on CD/DVD. Copy of the ISO file will not work. Check with the software that you did the DVD with to see if there is an option to "burn Image". If this is not the case, there are a lot of freeware tools that you can download. A google search for ISO image to burn is expected to increase much.

• The VMware Tools ISO image does not exist or is not accessible

  I have a few virtual machines with a yellow exclamation mark on the vmware tools icon indicating that they can be updated. When I try and update vmware tools manually, I get the error: "VMware ISO image tools exist or is inaccessible. See the error of the stack for more details on the cause of this problem". Below in the window of the error stack, I see messages, 'called 'VirtualMachine.MountToolsInstaller' or object < servername > ESXi '192.168.3.39' failed. Cannot install VMware Tools. An error occurred trying to access the image file ' / usr/lib/vmware/isoimages/windows.iso ' to install VMware Tools: 0 (input/output error). If your product comes with the module of VMware tools, VMware ESX to reinstall, then try again to install the VMware Tools package in the virtual machine. »

  I got messages stating I must check vmtools directory symbolic links and I think that those who are present. I also tried to manually navigate to the image file, but it seems that there is a problem any with the file system. See the images below:

  

  ESXi installed on a USB key. The directory of the iso images is corrupt? Can anyone help me on how can I fix? Should I just replace the USB key, or is there another way?

  See the input / output error on the screen usually indicates a faulty drive (or in this case device USB). I wouldn't waste a lot of time and replace the USB key.

• Iso image VDR does not start

  Hello

  VSphere 4.1.0

  I'm currently building a VDR from scratch, I had some problems with a previous installation.  I can't get the VMwareDataRecovery - 1.2.1.1616 - 369570-i386

  . ISO to boot at all.

  I checked that another ISO image would be start, no problem.  But the VDR just... does not work.  I get kicked in the network boot agent / PXE after that.  I tried to start the ISO from a store of data with the customer's computer via the option "connect the CD/DVD.

  I just downloaded a new copy of the VDR to make sure I didn't have a corrupt ISO.

  Any thoughts?

  Thank you.

  The ISO installation file is not bootable. It contains for example the OVF files for the device...

  Extract the files from the ISO image or mount it to the virtual CD-ROM drive of a Windows VM to access the files.

  André

• After the deployment of a Windows 7 image, pc does not start after Windows logo

  Hello

  I tried to install a laptop via a Windows Image. After that I deployed the image, the laptop does not start past the Windows logo. Normally I had to change the SATA AHCI setting to solve this problem, but he was already on AHCI.

  I tried to install it via a Windows 7 installation CD and it works, but I want to fix the laptop / image to work on this laptop.

  The logo of Windows get stuck, then I get a blue screen very quickly and it restarts. Also when I try to start in safe mode, it's the same thing. loading everything, then it gets stuck and also a really fast blue screen and reboot.

  Someone at - it an idea may be what the problem?

  BR,

  Jim

  I did restore by image much, many times without ever a problem.

  • I only use the integrated Windows 7 image creating installation
  • I only use a DVD + R White, never-r
  • I create the image ONLY on install brand new to be absolutely certain, there is no corruption

  I've heard of this kind of problem does not happen when the image was made from a damaged disc.  Which simply transfers the corruption.

• Cisco FlexConnect 7510 does not start the backup, stuck on "cisco bootloader stage2 loading" image

  Cisco FlexConnect 7510 does not start in the backup image. Yesterday I downloaded 8.1.102.0 on our master controller and rebooted when evertyhing was complete, the controller has not restarted in 8.1.102.0 it is stuck on the screen that says "cisco bootloader stage2 loading" I have hard reset the box with the power button and tried a couple of times. I looked at the material to break the boot with the 'ESC' key, but is not nothing to me either, even modified keyboards, comes to the white screen cisco F2 for Setup / F12 for the boot etc menu, but I'm not able to use the keyboard to enter this sequence. I have my controller to slave running 8.0.110.0 now that he's turned and took controll when the captain went to restart. For any help or suggestion would be greatly appreciated. Thanks Matt

   "cisco bootloader loading stage2"

  This happens when you connect a computer monitor directly to the WLC.  If you connected in the WLC by using the console port, you should not see this.

• My C50 - B Satellite does not start from the HARD drive

  Details of the machine: -.

  Model number: PSCMLA-03F07Q
  Serial number: XE343127P

  Computer does not start from hard drive. No error message, just the start Toshiba at the end of self-test screen.

  Sometimes a reinstall of the operating system seems to correct the problem, but then he would go again, now the problem is consistent.

  I reduced the possibilities to a fault of BIOS, reasons.

  System boots from USB with no problems. Installation of operating systems is done without error. SMART hard drive data indicates a perfectly healthy hard drive. Memcheck will return no error.

  The obvious solution is to reload the BIOS, just reset it doesn't help. But that is the problem.

  1.4 BIOS update that the Australian site offers is a Windows program and the computer cannot start Windows.

  Obvious answer is to use a bootable USB key with an operating system 'live' on this issue, but all of these systems are Linux and the update of the BIOS is a Windows program. So much for smart solutions.

  Downloaded Bios version 1.7 of the European site but the iso inside the rar file is empty, 25 MB in size but nothing in there according to Linux. Tried to run his program on a Win7 64 bit computer and it returns an error that it could not find the correct iso file.

  I submitted a support request by email to Toshiba, but they believe that it could take three days to get a response, so I thought I would ask here as well. Can someone tell me please to a working copy of the latest BIOS update disk for a laptop Satelite C50 - B? Note: this model does not have a CD player so iso should be compatible with USB boot.

  See you soon,.

  Andrew.

  Hello

  From my experience that I n think that BIOS update is the final solution for you. When you set the default settings of the BIOS disk HARD appears correctly in the BIOS settings?
  HARD drive is also offered and listed as boot device when you enter in the start using F12 at startup menu?

  What happens when you start using recovery image installation created recovery USB key (I hope that you have created a)?

  Offer BIOS updates are versions of WIN and can be performed by running the Windows operating system.

• My Windows XP does not start

  I use a Dell Dimension E310. I've recently upgraded to SP3 on my windows xp. Now it does not start and gives me this message:

  Windows did not start because of an error in the system. Please report this problem as:
  "Load needed DLLs for kernel.

  I looked at a few sites on how to fix this error. Everyone keeps suggessting, reinstalling windows. I don't have a windows installation CD. I have this computer 7 years ago.

  Now the difference with my situation is that I have vista and XP on my computer. So I am still able to access the files on my XP with vista. Now, I hate vista and I would like to get my XP working again, because most of my work and the programs I use are on this side.

  My question is this: is it possible for me to solve this problem without having to reinstall if I am still able to access the files? In the affirmative, please let me know.

  I hope that I just need to download a certain file and insert it in the right folder

  Thank you.

  Meaning so that their file is probably missing or damaged:

  c:\windows\system32\kdcom.dll

  There are chances good copies of the file on your system here:

  c:\Windows\System32\dllcache

  or here:

  c:\windows\ServicePackFiles\i386

  There is also one on my SkyDrive, you can download for a work machine and network disks using a floppy disk or a USB memory to the afflicted machine device and copy to which it belongs.

  Depending on your configuration of registry, you will not be able to access the floppy or USB key, once you enter the Recovery Console, but you will still be able to use a Hiren BootCD (it has its own register), but first try the easy things.

  The kdcom.dll is the same for SP2 and SP3 so somehow or another you need to get started on something to replace your missing or damaged.

  You can create a bootable CD from the Console of the Recovery XP (no XP media required) and then when you do, you must enter a command like this:

  Copy c:\windows\system32\dllcache\kdcom.dll c:\windows\system32

  or

  Copy c:\windows\ServicePackFiles\i386\kdcom.dll c:\windows\system32

  Answered in the affirmative if invited to replace existing file and you should see that a message the file (s) has been copied.

  Are you a first bootable XP Recovery Console because it is easy and something you can always use another day of rain.  If not get it for you, or the file is not found on your system, you can download it from my SkyDrive, but first try the easy things.

  Here's how to make a bootable CD from the Console of the Recovery XP (no XP media required):

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget what you have (no XP media required).

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD (do not install UniBlue or the Ask Toolbar - never!):

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Then enter the commands copy and see if you can replace the kdcom.dll file and see how things work after that.

  I see a potential problem with these instructions in the link Zhang posted (even if you don't have an XP bootable installation CD) true that we can take up later if he cares about.

• just installed sp3, xp does not start, gores in safe mode.

  I installed Windows XP pro sp3 today.  When I try to restart or start my acer aspire laptop Windows XP does not start and the computer goes to the safe mode screen

  How to remove Windows XP Service Pack 3 from your computer
  http://support.Microsoft.com/kb/950249

  How to troubleshoot an installation fails on Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950718

  Release notes for Windows XP Service Pack 3
  http://support.Microsoft.com/kb/936929

  The space of hard disk required for Windows XP Service Pack 3
  http://support.Microsoft.com/kb/947311

  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717

  How to troubleshoot an installation fails on Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950718

  Some third-party programs can make a change in functionality after you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/947309

  How to obtain the latest Windows XP service pack
  http://support.Microsoft.com/kb/322389

  Windows XP Service Pack 3 - file to Image CD ISO-9660:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=2FCDE6CE-B5FB-4488-8C50-FE22559D164E&displaylang=en

  Windows XP Service Pack 3 for developers network installation Package and the professionals (unique facilities for the PC can use the same file)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5B33B5A8-5E76-401F-BE08-1E1555D4F3D4&displaylang=en

• Error - NTLDR missing Windows XP Home computer does not start.

  Original title: XP-based computer does not start.

  XP Home does not start after I uninstalled a large file of Samsung mobile phone. I get a missing NTLDR error message and have had a System32 error as well, but there is no DOS prompt that would allow me to access anything whatsoever. Another problem is that I lost my installation CD. I initially bought this Dell PC nine over 6 years ago, so can provide identification details, if necessary program. Could someone tell me how I can make a recovery CD please? (No floppy drive not installed in the PC). To further complicate things (Yes, I know - I created many more problems that we all need), I have to keep my files on the hard disk, so cannot do a complete reformat, unless someone can tell how to save them somehow. My BACK skills could be summed up as "plodder inexperienced but determined!

  The file might be missing or it could just be that XP can't find it if your file system has somehow got corrupted.

  As the forums MS Answers does not prompt for any information system when a new question is asked, we know absolutely nothing about your system.

  Not knowing the basic information a problem prolongs the frustration and the agony of these issues.

  Provide information on your system, the better you can:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Your system have IDE or SATA disks?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a working CD/DVD (internal or external) drive?

  System32 error, you see, is what exactly?

  Depends on a few factors, there could be another copy of the file NTLDR in other places on your system, but you have to start on something to find out whether there is or not.

  After answering the above questions, I begin to make a CD from Recovery Console bootable XP by running a chkdsk/r, first on your HARD drive and then see what is left to do.

  Here's how:

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and don't forget (no support for XP not necessary).

  This is not the same as recovery disks that may have come to a store to purchase the system.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD (do not install UniBlue or the Ask Toolbar - never!):

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• Windows does not start. Stuck on the WIndows logo or a black screen United

  Original title: BOOT ERROR

  It's been 6 days since my computer is having this problem.i spin asrock pc.the problem is when I restart my computer it doesn't not load some time the screen appears black and sometimes windows logo appears faintly.and when I restart once more, he sows me windows error message it says windows does not start correctly and give me options to start , they start windows normally, sfafe mode, last known good... etc.when I chose an option and start same happens.but when I turned off my pc and wait a minute and start windows boot normally without a problem.is this because of my startup file or something else?

  No, you can't.

  If you have a true bootable XP with SP1 or SP2 installation CD, you can create a new installation CD with SP3 integrated using a process called "slipstreaming".

  It is a pleasure to the project for a day and there are several methods, you can read on the Internet, such as BleepingComputer:

  http://www.bleepingcomputer.com/tutorials/tutorial154.html

  If you want to use the Recovery Console and is not a real XP bootable installation CD or are not sure what you have, simply create a bootable XP Recovery CD of Console yourself (without XP media required)

  Here's how:

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  When you install ImgBurn, DO NOT install the Ask toolbar.

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

• Windows XP does not start. Can I boot Windows from a disk so that I can recover the data?

  Windows XP does not start. Can I boot Windows from a disk so that I can recover the data? This should be a CD because it doesn't have a floppy disk on my laptop drive. It is maybe that my hard drive has begun to fail and therefore cannot locate XP startup files. I can not start using one of the other methods of starting for example. Safe mode. If I can recover the data, I can then reload Windows and check the surface of the disc etc etc. Thank you all for your comments. Steve

  Lately, I'm leaning toward the Hiren's BootCD you can download here:

  http://www.hirensbootcd.NET/

  On the left, click on download, scroll down, choose the most recent version

  The download link is a little hard to see.  It is at the bottom of the page, above the drop for older versions and looks like this (click this component to download the ZIP file):

  Direct HTTP mirror + Torrent, Torrent Magnet

  Click the "Live HTTP Mirror" link to start the download and save the ZIP file on your desktop of somewhere that you can remember.

  The ZIP file is large, so the download will take probably some time to complete.  Then unzip the download to extract theHirens.BootCD.ISO file that will be used to create your new bootable CD.

  Create a bootable CD. ISO file is not the same as simply copying the. File ISO onto a blank CD.  You must use software that includes how to burn a. ISO to a CD to create a bootable CD.

  File ZIP the Hiren is the file BurnToCD.cmd that you can double-click to launch it.  The BurnToCD.cmd will use the file BurnCDCC.exe to burn the. ISO file onto a blank CD using your existing CD burner.  You can also use your own burning software as long as your software is able to create a bootable CD. ISO file.  More modern burning programs can create a bootable CD. ISO image.  Create a CD from an ISO image bootable is not the same as just the file on a CD burning.

  If you need a simple and CD burning, this is a free software popular software:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your new bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.
  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When starting on the Hiren's CD, you will see a menu of options.  Choose Mini XP.

  It will appear while Windows is loading and you will be presented with a desktop computer that has the look and feel of the interface of Windows Explorer, you are already accustomed to using.  You will feel at home.

  Using the Mini XP, you can access the Internet, maneuver around your system, copy files, replace the files, run the scans for malware, etc.  There are dozens of free and useful tools included in the CD that can be used to repair your system, or copy files to another device such as a USB device or an external drive if drop in trying to repair your system.

  If you want to see if you can fix your system, describe what is happening when you try to start and to answer these questions:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira!, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

• Is it possible to extract personal folders from my hard drive and transfer to an external hard drive if Windows does not start?

  Hello, I recently started my Windows XP Dell computer and it should start up normally unless it would run the ChkDsk utility. It would freeze then 68% on stage 1 and goes no further. I called the people of Dell and after trying so many solutions, including safe mode, safe mode with network and CommandPrompt, we ran the diagnosis. The hard drive and memory are fine, no errors. He concluded that it was the operating system and must be restored. However, I have important files, I need to extract from my hard drive and he recommended me an external hard drive. I bought it, but now I'm not sure how to extract my files from my drive hard if Windows can not even boot the desktop computer. Is it possible to extract these files without the use of the desktop computer?

  And you've burned the .iso image, and not as data? If Yes, then you have created a bootable CD. Put it in your optical drive and restart the computer. You may need to change the boot order in your BIOS. With some machines, you can get a temporary startup command menu by pressing a function such as F12 at startup. Other computers require that you enter setup and change the boot order in the optical drive first of all from there. When you start your computer it will be information about which key press to enter the BIOS (Setup) or give you the temporary boot order.

  After you changed the boot order to boot first from the CD and rebooted the computer, Knoppix will boot. Have your external hard drive connected to the computer before you start doing this. After Knoppix is finished booting, you will be in his office. It will be very similar to Windows. There are icons on the desktop for your internal hard drive and the external hard drive. Copy files from the internal to the external drive as you want. Review what I wrote about the use of Knoppix in my previous answer. MS - MVP - Elephant Boy computers - don't panic!

• Two disks hard two Vista does not start

  Two disks hard two Vista does not start

  For large computing needs, I combined two software Vista, two memoirs, two hard drives, the work display card and sound card.  A hard disk as Primary Master IDE has perfectly my current programs, Office 2007, data and functions.  The SATA drive has the space of files I need and a disabled Vista.  The computer starts with the SATA HD Vista does not work and stops at a missing file.  I do F12 and select the hard disk IDE startup.  I tried several solutions, for example: Startup Repair, recovery disk, installation DVD of Vista, repair, BIOS F2 re boot choice and sequence, does not list the IDE drive as a choice, tried to remove the disabled Vista, all the solutions in the forum, Ms.  Not solved.

  For months in the auto-update feature, the two .NET Framework 1.1 and 3.5 will not install.

  Please tell me solutions to correct these errors for .NET and start-up.

  http://support.Microsoft.com/default.aspx/KB/326246

  'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/kb/314060

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD

  Burn a CD or DVD

  If your computer is equipped with a CD or DVD burner, you can copy files to a recordable disc. This process is called burning a disc. By default, Windows Burns discs in the active file system format, but you can also choose to burn discs in ISO image format.

  See you soon.

  Mick Murphy - Microsoft partner

• Laptop does not start upward, Windows error recovery

  Hello, my laptop has blocked start correctly.

  It all started when I was using the laptop as usual and the battery disconnected, I didn't notice right away until I removed the charger and the phone is dead, because then the laptop does not start with the dough connected and the charger,

  I use Windows 7 when I boot up I got to Windows error recovery that takes me so into the Startup Repair which is nothing, I tried system restore but it won't let me past picking of a restore point.

  I have I have the laptop currently in safe mode hoping that would allow me to restore the system, but it has not, please someone can he help because it is a work laptop and I need to use it this weekend

  Thank you, Josh

  Hello

  Thank you for visiting Microsoft Community.

  According to the description of the problem you are facing problems with your Windows 7 computer. The question might be if there is a file system corruption. Then I suggest you to perform auto repair. For the execution of the task, I suggest you to try the steps below and see if it helps.

  Method 1:

  When you use the recovery environment (Windows RE) to troubleshoot startup issues, first try the Startup Repair option in the System Recovery Options dialog box. If this does not resolve the problem, or if you have additional problems manually, use the Bootrec.exe tool.

  Because you cannot start the computer, you may need to create a bootable Windows installation media, and then do an auto repair.

  If you are using Windows 7 then the link provided below might help you to download and create installation media.

  Download Windows 7 Disk Images (ISO files)

  Method 2

  Try to rebuild the BCD by using the Bootrec.exe tool.

  To run the Bootrec.exe tool, you must start Windows RE. To do this, follow these steps:

  1. Place the Windows 7 installation disc in the disc drive, and then start the computer.

  2. Press a key when you are prompted. Select a language, a time, a currency, a keyboard or an input method, and then click Next.

  3. Click repair your computer.

  4. Click the operating system you want to repair, and then click Next.

  5. In the System Recovery Options dialog box, click command prompt.

  6. Type Bootrec.exe, and then press ENTER.

  See the following link for more information:

  How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows

  http://support.Microsoft.com/kb/927392

  Hope this information helps.

  Meet us with the State of the question.

  Sincerely,

  Ankit Rajput