issue in BI publisher?

Similar Questions

• Error: Site currently is not available (was: can't publish on BC since update)

  Since the last update, I've done this week, I can publish is the catalyst for business. I didn't have any problems before the update. Here is general information, assuming that it might be relevant.

  Adobe Cloud members: is under me, because I'm the designer that uses the adobe platform to complete the work

  Business Catalyst: is the customer information, since it is their Web site

  When I try to publish to Muse on Business Catalyst, this is what I get. It acts as if it is a new site and then there is a message at the bottom topic are not currently associated with this user.

  

  When I check my preferences my client account is still listed as the account to publish too.

  

  Any help would be appreciated, because since the update, it is also completely destroyed the formatting of the Web site and I had to go and fix everything with some of the Muse themes don't work properly now a lot and had to fix those. So, the site doesn't work until I can get it updated with patches.

  Can you try this solution and let us know if this helped?

  1. Publishan empty muse heading to a new site.
  2. Muse to close and reopen the file Muse (with empty page layout). The new site should be thanked after issuing the command 'publish to the catalyst for business. "
  3. Close the Muse.
  4. Opens the previous file of Muse, you are trying to publish and try to publish again.

  Thank you

  Preran

• My site won't publish: "currently associated site is not available for this user.

  After update to build 2015.2, Muse will recognize my site credentials and allow me to publish it, as I always did. I have disconnected, then back, completely, restart - still nothing. Any help?

  You can try this solution!  It worked for me!

  1. Publish an empty file muse to a new site.
  2. Muse to close and reopen the file Muse (with empty page layout). The new site should be thanked after issuing the command 'publish to the catalyst for business. "
  3. Close the Muse.
  4. Opens the previous file of Muse, you are trying to publish and try to publish again.

• number of issues: free and paid articles?

  Is it possible to do folio issue multi and publish questions free and paid it? Thanks for the info!

  Yes, you can have free and retail issues in your Multi number App. For details, you need to have in-app purchases set up in iTunes connect as well.

• Character encoding does not work.

  The OK button in the page character encoding have disappeared in the latest version. Even after I chose a code page, it only shows the Cancel button and does not allow me to change the encoding.

  FireFox 29,0, Android 4.0.4

  Yes, it's a known issue. We publish an update, Firefox 29.0.1, to Google play either today or tomorrow.

• Caching Service broken for Macs?

  I ran on an issue that has published some time ago and is still a problem.

  It seems that the cache server does not work for any Mac that I get when they

  request for updates to the shop of MacApp.  It didn't matter if the update is

  a system update or and for an application update.

  However, any request for an iOS based app, no matter where the application

  comes, iTunes on a Mac or device iOS itself, is recognized, downloaded and cached

  and served on demand by a device iOS or iTunes on a Mac (Update pane in iTunes apps).

  On RARE occasions, an application of MacApp store is displayed in server log caching, but that ends

  by be the extent of it.

  One of the first reasons to use the caching server is save the download bandwidth and only

  need to download something once, but it does not work for the Mac (I have 5).  All the

  Mac is running 10.11.4 (10.11.3 before etc.).  The current version of the application server is 5.1, but

  This has happened for some time before this update (was hoping that this would finally fix it).

  The caching service worked as expected, as far as I could remember in Yosemite and

  front.

  Therefore, this feature actually eliminated?  Is it broken?  I have re-installed server, deleted

  caches and restarted, but had no success.

  In the "Country Restrictions" section of https://support.apple.com/en-us/HT204675 :

  • Download iTunes could not be cached if the IP address of the client is not associated with your area of the iTunes Store.

  This could be your problem?  In other words, the Apple ID, you use in the App Store is registered in the country where your cache server is running?

• Portege Z30T-cannot install drivers LTE

  I recently bought a new PORTEGE Z30T-A PT24CE-01600EN5
  updated to Version Microsoft Windows OS 8.1 Pro 6.3.9600 with its CD.

  I noticed today my connection LTE / 4G dropped several times and it was fixed when I restarted Windows, but then the LTE adapter deletes completely himself and connection
  .
  Whenever the connection drops, I check the Device Manager and there is no LTE device more so I have to restart again. And when he finds that he is the "generic mobile broadband adapt" not Sierrea.

  I go to Device Manager under network adapters---> EM7305 here for this device that is LTE the driver provider is displayed as Microsoft with the 6.3.9600 version 16453 dating from October 31, 13.

  Then I downloaded the driver LTE Sirerra from TOSHIBA Web site, here's what they recommend: [driver LTE | https://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 4 & selSeries = 362 & selProduct = 17899 & STAS hortMod = 4655 & language = 13 & selOS = 46 & selType = 438 & upload year = & monthupload = & dayupload = & useDate = null & mode = allMachines & search = & action = search & macId = & country = a he's & selectedLanguage = 13 & type = 438 & page = 1 & ID = 90092 & OS ID = 46 & driverLanguage = 42].

  I've installed several times but nothing changes, always driver of Microsoft it.
  Sierra is displayed as "Location Siearra wireless sensor" but not under network adapters.

  A little this driver deleted and moved no more.
  This seems to be a driver problem. Someone at - it a similar problem?
  Configure the laptop, it took me a week; I really don't want to use recovery each time without understanding why.

  Post edited by: djemo

  It seems that, up to now in this forum no one has reported that emits a similar LTE pilot.
  The question is: the same issue has been published in the factory system pre-installed?

  I guess you can't provide the answer to this question and so we cannot say with certainty that this material related question isn t.

  In any case, on the page of the Toshiba UE driver you can find a lot of drivers and tools of Toshiba for this device. All the tools and software as well as the BIOS should be updated to the last State. Check if you are using the latest version of the BIOS.
  Then I recommend you to install the driver manually through the Device Manager.

  The driver package that you downloaded from the Toshiba driver page is compressed. You must decompress the package. Inside of this package, you will also find and the exe file. It is also a zipped package. Right click on this package and unpack the exe file.

  Now you should see all the driver files and should be able to install the driver through Device Manager by using the Advanced installation procedure.

• Satellite P10 824: card reader SD and IrDA doesn't work

  I have a tosiba Satellite P10 824 a I don't know why I can use Infra red and sd card reader.
  I installed the driver but I do not have nor why I can use.
  When an sd card I can't and I can't send anything via infra red.

  Hello

  Check the Device Manager.
  Are the mentioned devices properly recognized in Device Manager or there is some yellow exclamation points?
  How did you install the operating system? Train the Toshiba Recovery CD or manually? This issue has been published since the first day, or you have installed any 3rd party applications?

  As you can see there are a lot of questions because no one knows what you have done on your laptop. In my opinion the damaged registry entries might be a reason for these issues.

  I think that you should try to remove the SD card reader and Irda device after the Restart Manager again you should auto search devices.
  The drivers have to update and it should be possible to use the devices.

• How we can know if my iphone already install spy app (like myspy, webwatcher) by someone?

  Dear Hei

  Please give know how to check my iphone's record or not to spy app like myspy, webwatcher

  TL; DR: having backups, use TLS everywhere, choose passwords secure, use codes to six digits or (better) passwords, etc.

  Well, since you are clearly concerned about the safety...  First, go get yourself good and current backups and maintain and recreate with the some schedule, like a lot of people here who are concerned about safety have these backups, or not to encrypt these backups.   Backups are a central part of the security, because they are the path to your data after the loss of the unit, damage or theft or such.   Although iCloud backups are possible, I prefer to use iTunes for this.

  Then determine if you have installed a software who ran security iOS - a process called jailbreaking - or whether you are a target of interest for an individual entity, organization or nation State with a lot of time and money and to access intentionally.  Since you ask this question here, you are most likely not.   Most people are simply not worth the risk of inherent exposure.   If you are, then formal assistance - an iOS device is that the tip of what is involved.

  If your phone was not jailbroken and if all of your passwords are well chosen through a mail server Apple ID and all services used, then the iOS platform default security will prevent all known shenanigans - outside interfaces designated, iOS security Apple seeks to block all applications to access all the other apps unrelated.   It is also why you do not see the anti-virus or anti-malware packages available on iOS.

  If your phone was jailbroken, then this is very probably wide open.   This process intentionally disables the security of the platform.   The jailbreak software that has been available is would have been extremely questionable itself, too.

  Now that you can do which connects out of the appliance - connections not secure network for mail or web, websites were opened, including networks Wi - Fi and cellular towers you have been close, etc. - can be monitored, but it is no different from any other computer in the network.   Make sure that you use TLS security everywhere and decent passwords.   At least the people of Mspy, is a known password iCloud allowing him to listen to (some) traffic to the iOS device.

  Apple Remote Desktop software - where this issue has been published, is completely different to your question, FWIW.

• How to manually forwarsd or port open for Blizzard Downloader to download a demo version of StarCraft II

  title port forwarding: original manual

  I want to use the Blizzard Downloader to download a demo version of StarCraft II.  I downloaded a 7 GB download for 4 days only to get to 99% and find that my download could not be authenticated.  They then gave me 3 things t do to overcome the problem.  I tried the first two and it does not solve the problem.  Finally, I should manually set port forwarding to allow 6112 tcp and UDP port and in.

  I tried to do, but don't know how.  My PC security is managed by Norton360.  I have a Belkin Wireless adapter and a router Linksys wireless connected to my Internet source.

  I was encouraged to pay $30 for a program that should automatically configure my ports... which was about the same amount that I would have to pay for a real record of customer in StarCraft II.  Ridiculous.

  Any advice on the manual port forwarding task?  Not sure that this good place to ask, but invite you, anyway.

  Thank you

  Hello
  Thanks for sharing the information. This will help other members of the community who are facing the issue. Please publish it on us in case you have questions more associated with Windows.

• CD/DVD drive is ejected disks after about 4 minutes. Often don't recognize the presence of the disk.

  Unit acted almost since. Don't recognize some discs, acknowledges some, even new program disks. When I can get it to play a DVD, it will appear yits in 4-5 minutes.

  Hello billyrhelms:

  Welcome to HP forum. Well, I see you found piou HP CD/DVD drive. This is a normal behavior how wonderful. CD and DVD have codes unfortunately HP Touchsmart will not open disks. You must use the Mexwell of HP brand discs or diskettes. Now for movies you have to pay for this updatehttp://www.cyberlink.com/prog/update/v2/update.jsp?fileTypeId=1&PRODUCTNAME=TouchSmart&PRODUCTVERSION=3.2_MediaSmart_4.0_DVD&VERSIONTYPE=BD+OEM+2ch&CHANNEL=OEM&LANGUAGE=ENU&OSREGION=0xf4&SYSTEMLOCALE=0x0409&BU=CLT&MAJORVER=3&MINORVER=2_MediaSmart_4&BUILDNO=4.0.4215&VENDORNAME=625&SR=HTS091023-02&DEVICE=DVD_Pre&PATTERNID=186873&BB_ID=58908&HWID=None&Model=None&APREGID=9649aabba4fa4bc2508c841e4b64e17a&UUID=None&affiliate=625_732_572_HTS091023-02_58908_186873_1-1_None_9649aabba4fa4bc2508c841e4b64e17a_None_0&utm_campaign=BB_&utm_source=BB_TouchSmart_625_&utm_medium=BB_TouchSmart_58908_Patch_Enhance_HTS091023-02_186873__ Not cheap very expesive $84.00 . If yoi is problems with the software disk. Insert the disc and then close this useless tiny window witch I find this very annoying.  Left click on (Edrive select properties and choose witch Windows to open the disc in.) The computer ejects disc not compatible and softawre

  It is one of the reasons why people are turning to Apple computers or other computers of the brand.  Please read forum. This is not the first time that this issue has been published. Please click on Bravo, if I answered your question. Thank you frrw.

• Problem with update vista

  Hello

  I have a similar problem on an issue which was published in 2009 and who was never apparently resolved.

  I have installed the latest updates 'critiques' to my computer that runs vista standard 32-bit and initially things seemed to work, although very slow. First obvious thing that's happened is that the toolbar has changed to a classic type of view (and would not change the type of which I chose) and the system worked extremely slowly (i.e. it took about 20 minutes to open a file on my desktop). I went to reboot the computer and goes really slow. I did a hard stop down, went to safe mode and went to the restoration of the previous system, while everything was fine. My mistake, I didn't prevent download does not happen and the system went through the same as above, except that when I shut down the computer it wen by entirely. When I rebooted the problem was still there, so I made a firm hard to be able to quickly access the safe mode.

  It is then the real problem started. SafeMode from got stuck and would not move forward after waiting half an hour. I did another hard to stop to see if the problem would be right and that he intended to run for at least an hour to try and get through the system restore. The computer is now in a loop without end. start windows normally happen to the installation screen step updates 3 of 3 stays at 0% and then restarts. If I try to go to safe mode because soon it passes through all the list of files, it goes to a black screen then restarts.

  I have no access to my office and have no idea how to fix this. I'd rather not have the system wiped and reinstalled if it can be avoided. Unfortunately, I don't have the codes to which updates have been installed, unless there is a way to access in a way that me are less familiar with.

  Help!

  It cannot start in normal mode OR safe.

  Francis

  Do you have the recovery DVDs?  Click on the link of the Startup Repair tool that I listed above.

  pus

  Use the following steps to start the system recovery:

  1. Restart the computer.
  2. When the Acer logo appears on the screen, press the left Alt and F10 keys.
  3. If you are prompted with a Microsoft Windows splash screen, press the Enter key.
  4. After that the Acer eRecovery Management application is loaded, select your type of restore.
  5. Read the review and then click Next when you are ready.
  6. Click next to start the restore process. Restoration can last from 10 minutes up to an hour.
  7. Once the recovery is complete your computer will load Windows and start the installation of your software and drivers. Your computer may restart several times during this process. Once they are all completed, your computer will be like it was when you bought it first.

  http://Acer.custhelp.com/app/answers/detail/A_ID/2631

• notification opens direct mail box has stopped working solution search then it resrarts live mail

  When I click on windows live mail, a notification box appears, said direct mail has stopped working solution. Then, a box will appear and restart direct mail. This product whenever I have used direct mail.

  Also my live messenger doesn't appear not work longer hours, a box appears and says setting side by side does not.

  Help

  R.K.

  Hello

  the two issues should be published in the Windows Live Help links below to forums

  Windows live mail-Forum:

  http://windowslivehelp.com/product.aspx?ProductID=15

  Messenger forums:

  http://windowslivehelp.com/product.aspx?ProductID=2

• Reliability Monitor does not work in Win7 Ultimate

  Can someone shed light on why the reliability monitor does not work in Windows 7 Ultimate? Apparently, it has not operated since I installed the operating system on a dual boot w/Vista system as nothing recorded, nor any indication that current operations record is!
  I don't remember having a problem with the tools of Perf and Rel in Vista and performance monitor seems to work in Win7?
  I already read the thread on this issue which was published in January 2009.
  Any suggestions welcome!
  Thank you

  Hi dw_witless,

  Thanks for posting on Microsoft Answers!

  I suspect that data collection is not enabled. To follow the steps below to enable it:
  1 activate the data collection for reliability monitor
  Reliability Monitor uses data provided by the RACAgent scheduled task. Reliability Monitor will begin showing an indication of stability, and event information specific 24 hours after installation of the system.
  The RACAgent scheduled task runs by default once the operating system is installed. If it is disabled, it must be enabled manually in the software component for Microsoft Management Console (MMC) snap-in Task Scheduler.
  Membership in the local Administrators group or equivalent is the minimum required to complete this procedure.
  To enable the RACAgent scheduled task
  1. Click Start, click in the search box, type taskschd.msc, and then press ENTER.
  2. in the navigation pane, expand Task Scheduler Library, expand Microsoft, expand Windows, and click RAC.
  3 right-click RAC, click view, and click Show hidden tasks.
  4. click on RACAgent in the results pane.
  noteNote
  The RACAgent task name is maybe not completely visible. If you don't find it, expand the name column in the results pane.
  5. in the Action menu, click Activate.

  If the steps above does not
  2 reset the reliability monitor:
  1. turn off your Windows 7 problem report history.
  NOTE: You need to do step 6 at this link above to delete all the problems.
  2. If the Reliablity monitor is open, close it.
  3. open the Folder Options and select (dot) the hidden files and folders option, and click OK.
  4. open Windows Explorer and navigate to C:\ProgramData\Microsoft\RAC.
  5. to save the history of reliability data-
  WARNING: This is an optional step, you will not be able to restore these data if you do not back up this data and it will be gone for good. If you want to ignore this, go to step 6 instead.
  (A) copy the PublishedData and the StateData files and paste them to another backup location.
  6 open the folder PublishedData.
  7. Select all files in the folder and click on delete.
  8. click on Yes to approve it.
  9 open the StateData.
  10. Select all files in the folder and click on Delete
  11. click on Yes to approve it.
  12. If prompted by UAC, then you will need to click Yes to each UAC prompt for each file in the folder StateData approve deleting each file one by one.
  13. close Windows Explorer.
  14 emptying the trash.
  15 open the Options folder and select (dot) the do not show hidden files and folders option and then click OK.
  16 open the Reliablity monitor to see it reset now own.
  NOTE: If Reliablity monitor is already open, close and reopen.

  For additional help, you can also check out the article below which explains more on reliability monitor:
  http://TechNet.Microsoft.com/en-us/library/dd744567%28WS.10%29.aspx

  It will be useful.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Integrative function of Virtual PC: possible xHCI (USB3) support of hubs is?

  This question is quite duplicate, but is written in a way better and the other had an initial response.

  The subject was sent to technet too.

  Hello

  I use a Hub-USB3 with Fresco Logic FL1000 pilot and master in Win7Pro: 3.0.110.12 (19/11/2010)

  • Start-up VirtualPC
    • If the HUB-USB3 is connected before departure
      • Error starting: features are disabled
      • During manipulations: blue screen crashes can in connection attempts that require integration, the exact circumstances not reproduced
    • If the concentrator is connected during the session
      • (Virtual) Windows XP crash or
      • Turning off the features
      • Even the video driver bit followed blue screen crash

  Can we and how to access the USB3 drives, managed by the HUB?

  Why disable startup gives no explanation?

  For six months, I'm looking for the solution without success and I had to stop several projects because of data accessible only via the software on XP.
  I discovered almost by accident the causes of disabling the integration features to start the virtual computer (I tried to start VirtualPC, while the USB3 hub was not connected... because I was looking for a problem waiting for restart of the system, while the hub is connected topic: on an ASUS G73SW USB3 Root HUB fresco logic has behave erratically - logical drives lost in work).

  Note that with the USB2, there no problem

  Best regards

  Trebly

  Hi Trebly,

  Thanks for posting your query in Microsoft Community.

  According to the description, the question must troubleshooting on Virtual PC and the HUB. I understand that the issue is already published in the TechNet forums but this more complex issue that generally responded to this forum. TechNet is watched by other computing professionals who would be more likely to help you.

  So, I suggest you to check the TechNet link suggested by Sara Basile replied on 4 February 2015 in the following link and to validate your request.

  https://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/why-and-how-to-work-around-when-a-USB3-hub-using/be55ae6b-A381-4741-970F-599b489c7b48

  Hope this information is useful.