Issue of burn OSX in USB or DVD

Similar Questions

• C50-A634 satellite will not boot from USB or DVD

  My new toshiba Satellite C50-A634 won't boot from usb or dvd,.
  I downloaded victory 8.1 and burn the image to a dvd but I always get an error message "no boot... device please restart."

  Can you please help?

  Hello

  Startup mode of the change in the BIOS settings and you should be able to use the optical drive as first boot device - http://aps2.toshiba-tro.de/kb0/TSB2C03F80002R01.htm

• DVD burner does not recognize blank dvd inserted

  DVD burner does not recognize blank dvd inserted into the pc

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Bootable USB-CD/DVD drive need for Portege M200

  I couldn't find any list with bootable USB-CD-& DVD-ROM-drive for Portege M200.
  No boot on USB drive. Some change to the boot of other USB devices?

  Sorry for my English

  Hello

  Please check this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=45144

  Horwath user posted a link to the Toshiba document that gives all the information on the CD/DVD bootable USB drives.

  In addition, you can buy a compatible USB WEIRD of the ASP from Toshiba

• G20-110: Burning recorded TV on a DVD - RW?

  Hello

  Anyone know if this is possible? I have a
  G20-110 and have tried to burn a program, I recorded it, on DVD - RW via "Windows XP MCE", but when it gets to 4%, it spits out the disc?

  Hello

  Have you tried burning the files on the HARD disk, and then on DVD - RW?
  I have never tried to burn the programs on the DVD and I can t give you an appropriate response.
  Please check this Microsoft Web site for detailed information on the registration of MCE

  http://www.Microsoft.com/windowsxp/mediacenter/using/TV/recordtv.mspx

  Good bye

• If I buy a macbook pro, how can I open a burning all my old projects DVD and how can I burn CD from my itunes playlist?

  If I buy a macbook pro, how can I open and burn all my old projects DVD and how to burn cd from my itunes playlist?

  To burn iTunes:

  GO to iTunes > help > using iTunes and search for burn and go to burn CDs and DVDs

  Try to publish the iDVD forum to burn old iDVD projects since Apple dropped to iDVD a couple of Mac OS x versions there are.

  iDVD

  The latest model MacBook Pro do not come with a DVD player if yo are going to need an external

• Boot from USB CD/DVD RW

  Hi all
  I would like to ask if it is possible to start the laptop (T.Satellite) an external USB CD/DVD. I have this necessary cause my CD/DVD-RW is not working and I would like to reinstall the system on the Toshiba CD with the hope that everything will start to work again properly. I try to go into the BIOS to change the sequency of startup, but I don't have the ability to put an external USB device. Thanks in advance for any suggestions.
  Leonardo

  Hello

  You should tell us what model you have because some models may support this and isn't the most.
  In general, I would say no, though. Very few models support this. The only one, I know in my head right now is the Portege M200. Other models later, it can support, but I can't say right now. It's better if you tell us that you you have.

  BR

  Tom

• Can't boot from USB or DVD. HP Pavilion g6 - 2257sr

  My new laptop HP Pavilion g6 - 2257sr doesn't let me boot from USB device.

  The laptop computer startup, I pressed ESC and F10. Then I put in place the order of startup UFEI - USB-device / DVD / OS selector.

  I use the official Windows 7 disc and several own USB devices with bootable images.

  But rebboting use OS hard drive provided.

  Help, please. I want to delete the current operating system on my laptop.

  Hello:

  I have a set of recovery first disks before continuing.

  To start the PC, you must go into the BIOS and enable the legacy mode.

  Then you should be able to boot from another device.

• Question about reinstalling operating system via external USB CD/DVD

  Hi all. I need to reinstall the operating system on my portege m200, but I have a lot of problems:

  (1) the recovery DVD seems to not work on my external USB dvd drive
  (2) at the start, it is impossible run any OS on cd USB external dvd drive, so I can't use another XP or Linux OS at startup

  Someone told me that I need a particular type of dvd-pc card reader. Is it true? dvd to pc-card readers are good or I need gadget particular toshiba?

  Thanks for the help and sorry for my English
  idum

  Hello

  As far as I know that you need a compatible USB key to boot from the external drive.
  I found this useful document with a list of compatible readers on the Toshiba support page.
  Please visit this link:

  http://support.toshiba-tro.de/KB/40/TSB4800R70001R01.htm

  Best regards

• Burn VIDEO_TS or DMG to DVD image readable on DVD-Video players?

  I burned a movie to a DVD using toast. Now I want someone sends a file so that they can burn their own DVDs. I moved the DVD files on my desk. I burned them (a VIDEO_TS and AUDIO_TS folder inside) directly on a DVD, but it's unplayable. I used disk utility used to create an image ("read-only" Format of Image with 'none' encryption). I burned this .dmg directly on a DVD, but it's unplayable.

  Is it possible, or is it the other person must have something like Toast to burn their own video DVDs?

  Open the toast and click the video tab. In the drop-down list, choose the VIDEO_TS folder (you need not the audio file). Drag and drop the VIDEO_TS folder on your desktop in the left pane blank. Burn the disc.

• can we build SP1 AND SP2 in a Vista image file and burn it to a single DVD?

  can we build SP1 AND SP2 in a Vista image file and burn it to a single DVD?

  http://www.Vistax64.com/tutorials/151606-Vista-SP1-slipstream-installation-DVD.html http://www.Vistax64.com/tutorials/230249-sliptream-Vista-SP2.html

  A read of the links above and links inside them on how-to-do-it.

  See you soon. Mick Murphy - Microsoft partner

• How do burn you a CD or DVD from an ISO file

  WINDOWS XP / HOME EDITION / 2002 VERSION / SERVICE PACK 3

  How do burn you a CD or DVD from an ISO file? To be more precise, Windows XP file system image which is only on my computer. I bought this computer a long time ago and I have the product key, but I don't have the original installation CD.

  Do you know how I can burn the image file of Windows XP that is currently on my computer?
  What drive A: and D:? These 2 drives will be included in the Windows XP image file?
  Thanks in advance for your answer.

  WINDOWS XP / HOME EDITION / 2002 VERSION / SERVICE PACK 3

  How do burn you a CD or DVD from an ISO file? To be more precise, Windows XP file system image which is only on my computer. I bought this computer a long time ago and I have the product key, but I don't have the original installation CD.

  Do you know how I can burn the image file of Windows XP that is currently on my computer?

  What drive A: and D:? These 2 drives will be included in the Windows XP image file?

  Thanks in advance for your answer.

  I recommend that you download and use the freeware Imgburn program.

• USB and DVD not recognize anything it shows that peripheral unknown.

  Original title: USD/DVD does not work.

  my USB and DVD does not recognize anything, it shows device unknown and does not work.

  Hi alexandrebernat,

  You did it all change hardware or software on your computer before this problem?

  For the question USB, you can follow this link & check if it helps.

  USB port may stop working after you remove or insert a USB device

  Reference: Troubleshooting tips advanced to General problems USB in Windows XP

  For the CD/DVD drive problem, you can follow this & check if it helps.

  Your CD or DVD drive cannot read or write media

  Reference: How to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD

  Hope the helps of information.
  Please post back and we do know.

• boot usb or Dvd canoe

  I try uffi menu of startup to boot from usb and dvd on my g6 2320tx pavalion notebook...

  and it's just starting the win8 and ignore what is in the Flash DRIVE or a Dvd

  I want to install win 7 on it as victory 8 is crap...

  Please help me to install win 7...

  Hello

  Try disabling 'Secure Boot' and enable 'Legacy Support' - save the changes and then try to boot from the disc or usb again.

  See the HP document on the following link for more details.

  http://support.HP.com/us-en/document/c03653226

  Kind regards

  DP - K

• My HP Presario f 700 laptop does not recognize my CD/DVD drive and will not burn or play CDs or DVD movies.

  My HP Presario f 700 laptop does not recognize my CD/DVD drive and will not burn or play CDs or DVD movies.

  I have a lightscribe, CD/DVD player, and I started having problems about a month ago... I tried to burn a lightsribe CD and my computer told me that I didn't have a CD Lightscribe drive (I!)... then when I just tried to burn the music on the CD, he didn't do it either... Finally a week ago, I tried to play a movie on my laptop, and that does not work either.

  When I insert in the film or the cd, the drive lights up and I can hear the work, but it is as if she has no connection with my laptop and my laptop is not picking up the CD/DVD drive try to play a movie or a cd.

  A friend suggested that I go to the HP website and am trying to download a driver, but I didn't know what to do once I got to this website, and I don't know if it will work.

  If you know how to solve this problem, or if you have had a similar problem with your computer, please help, thank you.

  Hello

  Try the microsoft 'fix - it' for your problem below

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  and read this information too

  http://support.Microsoft.com/kb/982116/en-us