Issue of first Elements 9

Similar Questions

• Burning issue with first Elements 9

  I made a cinematic slideshow in first Elements 9 and I wanted to then burn it to a DVD.  He reached 99%, then I got this message:

  .\Vobulator\BlockPlanner\BlockPlanner.cpp,line215

  The DVD is ejected without completing the burning process.  What should I do?

  The audio in the preview works perfectly with the menus. The video plays slowly and is a bit slow and sort of stalls, but the sound continues to play very well.

  Just to make sure I'm on the same page as you, here we are talking about video in the Menus, right? These would be animated Menus and have both a video "background" and also Audio.

  If that is correct, I have some questions and he has not seen the up-thread answers.

  What is the format/CODEC the video background Motion?

  Its duration is that of the Audio match perfectly? If this isn't the case, I would say that you do this either by editing the video file to match the Audio, or vice versa. I would keep this time< 30="" sec,="" but="">

  To make the animated Menus, it's my workflow:

  1. I have create a new sequence in PrPro, where you create a new project in pre.
  2. Import my video & Audio.
  3. Drag each to the timeline
  4. Change less than 30 s, as it should. Note: This is where I set my Audio levels and as for Menu music be ~-12 to-18 dB, but I put those in the ear, with only a glance to my meters. I don't like strong Menu Audio, because I believe it should be nothing else than background.
  5. Export/Share to the elementary streams, i.e. a DV - AVI file in one video and a PCM/WAV Audio file only to 16-bit 48 kHz. Note: I'm on a PC, so these exact REBS. are for the PC. On a Mac, one would choose MOV and probably a CODEC like Animation, but always make the elementary streams, the MOV has no Audio - it would be only the video stream.
  6. Then back in the draft, where I intend to use those, simply import and use for my Menu animated backgroun and Audio

  Not sure how this workflow will work for you, but it will eventually create Menus very similar to those of the library, even though Adobe may well have changed their video to something like MOV format, especially since the pre went X-platform with PrE 9. Again, the app creation with PrPro, Adobe went from WMV for video to M2v, from PrPro/Encore CS3, assets when PrPro/still go X-platform. Yet, on a PC, nothing works better than a DV - AVI video only that corresponds to the Menu (and the project, where the Menu is used) in both the pixel x pixel (proportions) dimensions and also in the (Pixel Aspect RATIO), which determines if a Standard 4:3 and widescreen, 16:9. If I still use it, where everything is done "by hand", the modules of this program are the same as those before, and I've never had problems.

  I found that if I feed creation program just what he wants and needs, and taking any supplement treatment charge out of it, things work better. Matter of fact, even though I do not always animated Menus, but always have music on them, I've never had a mistake for years. So far, things have always worked perfectly and hope they do for you also.

  Good luck and please keep us updated on your progress.

  Hunt

• Active project - first Elements 14 - cannot dray files

  I can't drag files in folders in the active project in the first 14 with Windows 10 elements.

  Bill McMurry

  Thanks for the follow-up.

  Let me give you an example... If decides to issue all about working to put images in folders of the project not the routine and drag-and - drop files in the active project... an example

  If I have images imported into the workspace of first elements 14 active project experts (see list), create a folder in the project and want copies of these images in the folder

  .

  Then as I hold down the CTRL key, I'll click dragging an image in the folder icon.

  

  You can open and close the file by clicking the small triangle to the left of the folder for the folder icon.

  However, at this point, I agree with you that 14 is 'different' in his behavior to file new active project (against 11, 12/12.1 13/13.1)

  11, I could drag the files in the folder - not abandoning the original you see in screenshot 2. Also, 11, I could drag the file out of the folder for various purposes, including the rearrangement to the folder. I can still do it with the help of the CTRL key, but I end up with the copy.

  If what I'm describing goes to the point of your question, I will explain some more on it. I did the above with first elements 14 on Windows 7 64 bit. Based on your response, I'll do that too with Premiere elements 14 on 10 64-bit Windows and add more variables to the mix.

  Thank you.

  RTA

• 11 "Green Media" Bug - first elements all help?

  Hey everyone, I am having trouble with the first elements 11. Whenever I have add data to this project, he bugs and the entire video becomes green.

  The video itself is not the problem, as I have tried with other videos. This just started to happen, it was fine before. I use Windows 10. I tried to restart the program to see if it would be fixed, but not luck. Any help would be appreciated.

  AstroA

  Thanks for the follow up with important details of troubleshooting.

  NVIDIA Shadow Play catches have had problems in the past with Premiere Elements. I realize you are facing at a before and after the situation. But I suspect that this is independent of the operating system and version of Premiere Elements. But the answer will be in the details.

  The following link refers to an audio problem with NVIDIA Shadow Play video and Premiere Elements.

  Audio recordings of Nvidia Shadowplay is asynchronous to the video in first 12 items! How can I solve this problem?

  Think about download and install handbrake to get the H.264.mp4 @ version rate constant frame and then import this file in first 11 elements. Is the missing issue or?

  Premiere Elements does not do well with the video recorded with a variable rate. The symptoms are out of sync audio to not be able to import the file at all.

  Please confirm... are the current green imports into Premiere Elements of today project the same real files who worked before the 10th of Windows?

  Please consider the above.

  Thank you.

  RTA

• Adobe first Elements 13 do not interpret the film and properties correctly for widescreen is a mod.

  Adobe first Elements 13 do not interpret the film and properties correctly for widescreen is a mod. This has been brought to the attention of Adobe in December of 2014 by others. If you import a footage in Adobe Premiere elements 11 or 12, you can eliminate the black bars on the sides by setting predefined settings correctly and using properties and interpreting the film. Not the same with 13 elements. What has been done to correct the problem? How users can be compensated for the purchase of a program or upgrade to a program that has a fault serious?

  Please notify.

  fran3

  What you report a known problem with elements 13/13.1 first I wrote about back in December 2014, and whenever the subject came up in the Adobe Premiere elements Forum.

  First Elements ATR troubleshooting: EP: 13 serious problem with. MOD Widescreen files

  I have not seen Adobe personal or PRE_help this issue whenever it appears in one of the threads here. The frequency of appearance of personal Adobe or PRE_help is not defined. It's a call from Adobe on ignore or fix in the next version or other.

  This isn't Adobe. Instead a user. You need to contact Adobe to know the why of the situation and what his plans are to remedy the situation in order to allow the usual workaround if this is a solution that will make unnecessary workaround.

  You have a chance by converting the widescreen is a mod to another format that would recognize the flag of 16:9 wide screen of is a mod, if 16:9 is really there.

  RTA

  Add on... Consider

  https://www.Adobe.com/cfusion/mmForm/index.cfm?name=wishform

• We tried to install Adobe first Element and he repeated to me that drive E is empty.

  Adobe Premiere elements 13.1 keeps saying drive E is empty.  We got around him, changing the name of another letter.  Why did do that?

  Véronique

  Please explain your question a little more away. Here's your scenario?

  1. you have installed Adobe Premiere elements 13 (on which OS computer?) Supposed the installation disc and the default location on the Local c drive.

  2. you insert your installation disc in the tray of the burner, the burner is the E drive? And, you get an empty message E drive instead of automatic reading

  you click to start the installation path?

  There is a known issue with the elements first 13/13.1 where installing this version an error No Disc. The fix for this is deletion or deactivation of the OldFilm.AEX

  file in the path

  Program Files

  Adobe

  Adobe Premiere Elements 13

  Plug-ins

  Commune

  NewBlue

  and in NewBlue folder is the file OldFilm.AEX that you remove or disable renaming of OldFilm.AEX to OldFilm.AEXOLD.

  What kind of Blu - ray or DVD/CD burner DVD burner has been involved in this situation - internal or external?

  RTA

• My serial number will not be accepted when I try to download first elements 13?

  I have a MacBook Pro laptop computer and I recently bought first elements 13 because I need for school and work however when I get to the last phase of download, my serial number is not being accepted and I tried many methods of download! IF anyone has had the same or similar issues please let me know! I paid a lot for this and I really need the program.

  travisw

  Thanks for the update. I'm glad you have Adobe Chat comments on this issue of incorrect Mac serial number.

  A cat tried to create a new user account with administrator privileges, installation and you try to run the first Elements of her?

  I hope that Adobe Chat solves this with a new serial number that will work for you.

  Please update us on your progress as your schedule allows.

  Thank you.

  RTA

• First Elements 11. Cannot open the project (file PREL) in point 8.1 of Windows.

  I created the project (file PREL) in the first 11 elements in the Windows 7 Professional environment. I was able to open it without problem.

  Now I have Windows 8.1. When I try to open this project, I have a saying "this file type is not supported, or the required codec is not installed."

  Help!

  Levalt

  Thanks for the reply.

  When you import media source in a first Elements (any version), you are not importing real media. What you have in the media of the project are copies of the originals which are stored in the designated place hard drive. But the project needs to trace these originals to the save location as they were when they were imported in the project. If you move the source media, delete rename them or even that they are in the folder, you will encounter some bad media reconnect issues. At this point, the message "Where is the file...?" that you get when you try to reopen the saved closed project will be a major asset by her reconnects. Alternatively, you can use the function replace images for her reconnects.

  The following links go to the above factors...

  http://help.Adobe.com/en_US/premiereelements/using/WS09e4b3c48f3a79fc19b622510385d4355c-7d cb.html

  http://www.atr935.blogspot.com/2013/04/pe11-replace-footage.html

  Troubleshoot damaged projects | Adobe Premiere Elements

  Do not hesitate to ask if you have additional questions on this or need for clarification on what written.

  Best wishes.

  RTA

• A specific point in the video gives first element crash

  Hey

  I have a problem that is PISSING ME OFF!

  I have a video file recorded with Dxtory, minecraft, and most of the video is very good. Does with errors or crashes in Windows media player.

  BUT then I took the video and play, at one point in the video, it blocks first elements, no error message, no point of freezing, just "Adobe premiere has stopped working".

  This bug or what ever it is, is a deal with the video file, because I can through the video what ever I want to first elements, and if he doesn't have a Xvid codec, its fine. (Yes I checked if the video file is Xvid and it's not)

  I tried to convert the file to mp4 = new show = just audio

  I tried to compress the file = problem = elements like Xvid

  I tried to run a booster mode, reduce half of the edited video, make the first part without problem = always crashing to the point of 'crash' (if this isn't a memory issue)

  Y at - it no great beautiful man with the answer to everything, who can help me please?

  Thank you

  Yes the links didn't directly help me with my problem, but they helped with something that could prevent this problem.

  The codec-links gave some good information about the weird codec using the Dxtory and also some alternative codecs. I for example will use codecs without loss as an alternative clean "Lagarith lossless codec" or Dxtory´s, called "PackBit codec" and hopfully not having this problem again.

  Now, what I did, was like John T Smith said, using another program to change. But what I have, I found the drop point which was in my video, is 00:13:41:26 gone 11sec back up 00:13:30:00 and make a cut, went from 19 sec before the drop point and makes another cut. I then removed the video clip that I did, so I was left with a g 30 sec.

  Then I went to Windows Live Moviemaker and made an exact replica of the clip I just removed, rendered the clip moviemaker and placed in the ATM in my project to create items.

  It worked fine with no crash! The only down side is these 30 seconds, there is a small decline in quality and a little switch in the sound, but who better than nothing

  Thank you both very much for helping me! With the new codec I got of hunts to the links, I will hopefully not encounter this problem again, and if I do, John T Smith helped me with the solution of movie maker.

  Thank you!

• First elements 10 video playback is very bad and rough

  When I look at my Prime Minister mts files to 10 items, the video is really bad. But when I watch the same videos with windows media player, that they look very well. Any idea on how I can get my videos to look good in first elements? I have a new high-end computer.

  You must use Premiere Elements to get the support of your camcorder to your computer, Don - not the software that came with your camera and certainly not Windows MovieMaker. You want to keep the video in its "native" format, and Premiere Elements will do.

  Just follow my instructions above and you'll be fine.

  Regarding the video, you have already captured as WMVs, it is possible, you can still use them in Premiere Elements - but you are going to have performance issues you encounter. Then you can actually be wise to carry out this project in Windows MovieMaker, the only product that is perfect for use WMVs as your edition files.

• Video playback on Adobe first Elements 8 no longer works

  Windows 7 Professional 64 bit OS

  Lenovo T420

  i5 second Gen Proc

  8 GB RAM

  First Elements 8.0

  Last update Version and update driver

  Majoirty of video from the Flip camera

  What other information is needed?

  I work on a video for the past two months and have about 15 minutes of film.  Recently when I opened the project to work on the last 25% of the play feature has stopped working (no sound or audio when you press play).  I noticed that the background rendering has been disabled so I have reactivated it, but I'm still facing the same problem.  I saved my video in several formats, including AVI in the hope that I will be able to complete at a later date.  I'm only a bit technical, so please don't waste your time correcting me (I'm sure that I have committed several mistakes and provided information that aren't pertainent to the issue)!  Looking for help, so I can finish my project.

  
  Thank you in advance!

  OK, this chip Intel graphics and its driver, could be part of the problem. I go to the Lenovo Web site and see if they have the latest video driver available. If so, I would setup which. If they don't, then check the Intel website for a newer driver.

  Pre interfaces very, very closely with the video and even a simple OS update, or hot - fix driver, can make the out-of-date video driver instantly. That's why companies like nVidia and ATI/AMD issue so many updates pilot - about one a month.

  While you check for drivers, see Realtek and see if they have a new driver audio too.

  That things once worked, but no more do, pointing to something changing, as an update of the OS.

  Also, take a look at this ARTICLE, which begins as a checklist to get pre working its best, then goes into detail about tuning its hardware and OS and finally troubleshooting.

  Good luck

  Hunt

• First Elements 9 and Fraps

  Hello

  I record images with a resolution of 1600 x 1200 using Fraps and as so far have been unable to find a predefined project exit in first Elements 9, which does not produce a wide black border or the resulting images.

  I have scoured the internet for help on this issue and tried to return many projects using different presets and output parameters, copy of my project overall using ClipMate.

  As nothing has worked until now, I thought I would ask directly. It becomes a very annoying problem, I missed the date to which I wanted the project to be finished and am disappointed that the software appears to be unable to correctly render the Fraps video.

  Any help would be appreciated. I am sure that there must be a combination of settings that I need to use, but I can't work on what it might be.

  Thank you!

  It took me three weeks, but I found a way to fix my problem without sacrificing the resolution I wanted--followed the advice on this topic, modify it to work with 9 elements: http://forums.adobe.com/thread/480309

  Finally, I was able to create my own project preset without using a first pro, and it made my video perfectly.

  I hope that others will enjoy!

• First Elements 10 64-bit does not start

  My question:

  When I try to start Adobe Premiere Elements 10 64-bit the program will start and then windows will announce "Adobe Premiere Elements 10 has stopped working"

  My system:

  HP Elitebook 8540w

  Intel i7 CPU M640

  8 GB Ram

  64-bit operating system

  NVIDIA Quadro FX 880M

  I tried: (I'll try to remember everything)

  Uninstall/reinstall

  Reboot after each uninstall mentioned in the I tried section

  Uninstall antivirus

  Stop all programs and unnecessary services, that I could find

  Video and audio card drivers updated to the latest version

  Updated to the latest version of Quicktime 7.71.80.42

  Clean hard drive and temporary files

  Uninstalled NVidea Driver 3D, PhysX system, nview, and HD Audio Driver, leaving only the main display driver

  Checked event viewer looking for connected issues.  It still fails on display.dll.  Details below

  Name of the failing application: Adobe first Elements.exe, version: 10.0.0.0, time stamp: 0x4e791009

  The failed module name: Display.dll, version: 6.0.0.0, time stamp: 0x4e78fee0

  Exception code: 0xc0000005

  Offset: 0x00000000000230bc

  ID of the process failed: 0 x 874

  Start time of application vulnerabilities: 0x01ccaba6fa61d433

  The failing application path: C:\Program Files\Adobe\Adobe first 10\Adobe first Elements.exe Elements

  Path of the failing module: C:\Program Files\Adobe\Adobe first Elements 10\Display.dll

  Report ID: 3c543fc1-179a-11e1-ad00-68b599f767d3

  Any ideas?

  After spending all day on this I finally found the answer.

  He had something to do with my two monitors connected to my dock.

  Arrrgh!

  Disconnected from the laptop and it works fine.  Thanks for all the suggestions!

  Merck

• Question of fundamental change first Elements 7 for DV

  Hi all

  I have PE7, a quad-core Q6600 and Windows 7 64-bit.

  I captured about 6 hours of Standard definition a film DV 16:9 of the church ceremony.  Video was taken of an old Pana PV-GS320.

  The Church wants a dynamic video to be produced from the captured sequences (60 minutes more than in length).  I intend to do a lot of different effects including semi-transparent overlay video, picture in picture, inserting pictures and audio inputing the video of the ceremony.  The final product will be a standard definition DVD disc.

  I did some research about how the DV is interlaced and output to DVD must be interlaced (unless I am mistaken in this conclusion, let me know).  I also know that doing heavy editing with interlaced images (slowing/speeding up footage, zoom in and out, rotation, several overlay, etc.) may create flicker and "mouse teeth" in the video.  I also searched through these forums and continue to run in HD questions/solutions...  I guess I asking an old question that has probably been answered a long time ago when a DV tape ruled the world.

  QUESTION 1:

  So, if I may ask, in order to obtain the best results, prepare my raw images in PE7 before editing it by (1) deinterlace it? (2) exporting as progressive? (3) both? (4) leave it alone and start to change there? or (5) if I'm missing another option?

  QUESTION 2:

  Also, what the resolution would be preferable to import photos into the project?

  I know that the best way to work with any video must make as small as possible changes to it, but it's inevitable in my case.  No one wants to attend 6 hours of video...

  Thank you very much for reading my questions and I really hope that you have time to answer!  Thanks for any information!  I really appreciate it!

  -141rockwell

  Relax, rockwell. You do all this unnecessarily complicated.

  If you capture your video to DV - AVI via a FireWire connection, you will not get "mouse teeth" in your final product. The program is designed for working with interlaced video and create interlaced DVDs. The results should look almost as good as the original film. You can't damage video with "excessive change.

  Just trust the program to deal with technical issues. You can concentrate on editing.

  In regards to the photos you want to add, you will get the best results if they are not larger than 1000 x 750 pixels in size, by the frequently asked questions to the right of the forum.

  http://forums.Adobe.com/thread/431851?TSTART=30

  Meanwhile, if you are looking for help with the Basic program, be sure to check out my tutorials of basic 8-part training free of charge to the first Elements Muvipix.com support site.

  http://forums.Adobe.com/thread/537685?TSTART=0

• Sony DCR-SR85 will look grainy in first elements 7

  I was using a Sony DCR-SR85 camcorder with a 60 GB hard drive. Latey I noticed that when I save my wife's horse in the arena the video seems a bit grainy when I down load it into prime Elements 7. I say grainy, but maybe it's not the right word. The pens have conducted horizontal and the pixels with the pipes to almost make a wave in the background. The horse looks very well in the video, I am shooting in standard mode, but is planning to go to high quality mode to see if that helps. I give work area in the calendar after I downloaded the video pre 7. He always looks a little weird every time you move anything with near multiple horizontal lines. (as a kind of enclosure)

  HI -.

  Your camcorder is what we called a 'hybrid' and can shoot in a variety of standard definition modes and levels of quality. It is difficult to advise you without knowing a few details.

  What mode are you? If you go to edit your video in Premiere Elements, you can shoot in HQ mode.

  When you set up your project first Elements, that project settings did you use? You must use the disc hard/Flash Memory Camcorder Project / Standard definition preset for this type of camcorder.

  How did you get the video from your camcorder to your computer? In version 7, you should be attaching the camcorder to your computer via USB, and then use the Media Downloader items first (tab organize, go to get media / AVCHD or other hard drive camcorder) to import the video into your project.

  Although, by nature, your computer will focus on your camcorder interlacing (which appear as horizontal lines) and these are not issues when you play your video on your TV, there are certainly graphic problems that are inevitable. As all videographers, know you should never shoot video of a person wearing a striped shirt or a person standing in front of Venetian blinds. Narrow lines produce a distortion called a moire - and if that's what you see, there is not much that can be done on that, with the exception, do not shoot, unfortunately.