Issue of multi-Cam

Similar Questions

• Complex issue of multi-camera editing

  I have a question of several camera.

  I have the following clips:

  1 video clip continues with audio

  24 with audio video clips taken at different times (from different angles and close ups) catches throughout continuous clip

  4-track mono mic that extend over the entire period (4 different microphones placed at various locations in the room)-they are defined as mono in the settings of the element.

  1 stereo audio clip which extends over the entire period of audio recorder separate

  When I create sequence multi-cam, audio-based, it does not complain and creates the element multi-cam.  However, when I put in a sequence, I have 26 audio tracks. Many of them are empty.  I have no audio at the beginning, although I see the video game.  The audio tracks I see seem to be all stereo, with his fate only one side.

  Is there any special way working to combine the sequence above in a multi-came track, where I can change camera angles that I prefer and then mix the audio based on who speak - IE spend an audio 7 sources and sometimes to mix some of them at different levels?

  Most of the videos I've seen does not appear to cover this level of complexity of clip, so really doesn't help.

  Any suggestions gratefully received!

  Thank you

  Dave

  What I do is manually synchronize everything in a sequence, then alt - select the video (and not audio), then right-click and embed the video tracks. Then right-click on this nested track and choose Activate/multi-cam. Now I can make multicamera on photo editing, and audio tracks are intact. I mix and remix audio to my heart's content.

  There are 2 drawbacks to this method, but for me they are tolerable. 1, you must get the synchronization just before you nest, otherwise it's a mess. 2, by balancing the sequence, you have to be sure to cut all the audio tracks at the same time to maintain synchronization.

• I have a project with clips of multi-cames and that they do not play

  By pressing space or play on the window of the program button will act as if it is being read (turns into a stop button) but will not. I am using first Pro CC.

  I have 17 different time limits all multi-cam. Anyone have a resolution?

  Ok.

  Update 9.0.2.  There was some difficulty big on this issue.

• Multi camera: Z3

  Hello

  I have a compact Z3 and a Compact of Z3 tablet. Both have the multi camera installed function.

  However, when I allow it to touch their back to back, they are trying to connect for a long time, but nothing happens and finally a message to say that they are unable to connect.

  They are obviously grateful each other, but there isn't any multi-camera event.

  I tried three permutations:

  (1) multicamera beginning the Z3 compact and touch to the Table Compact Z3. This results in a long delay, then a pop-up on the Z3 Compact to say "Connecting to the Xperia" and a pop-up on the Tablet Z3 compact saying "collected a new tag: application/onlineremote ' which is repeated on several lines." Finally the Z3 Compact says that it cannot connect.

  (2) in reverse with the Z3 Compact Tablet first. Same again (1), just the opposite.

  (3) start the camera both application and select multicamera on both and then press them back to back. They try to connect and then eventually abandoned.

  Any ideas? I'm not as something exotic. They are the two models Sony Z3 with the default android on them and they have not taken root.

  Thank you

  Joe

  Hello

  So, an important update on that.

  I called Sony and they told me to delete the data files and the cache for the application of the camera on both devices. I did and it made no difference.

  Then they told me to factory reset the devices, how I've had enough of bad mood because I spent long enough to implement and Sony did not have a specific reason why this should solve the problem. I felt that it was somewhat a 'try this because we cannot think of another thing to tell you".

  Anyway, I didn't do that. What I did to, it's get to restart both devices over the next few days.

  Then I tried again, put the two devices in mode multicamera, before I tried to open the connection. And it worked.

  Thus, three options are available:

  • Reset the date/cache for applications.
  • Restart the device.
  • Retry the connection when the two devices are mode multicamera.
  • Or maybe just a combination of those three...?

  I hope this helps someone!

  Joe

• Synchronization multi camera using points, but no point

  Hi all

  The question is quite simple:

  Can I synchronize two clips for multi-cam using the point in but but not starting from the point.

  I thought it should be a basic option, given that many times, I have a point a minute in the video sync, but I still need this minute in the sequence obtained from multi-cam.

  This minute to lose since the multi-cam sequence starts from where was the sync point.

  Any ideas?

  Use markers instead of points.

• Multi-cam editing - switch cameras

  I am currently editing a multiple camera sequence, but a right click and select camera 1, camera 2, picture 3 in the Drop Down

  It takes time to scroll to the bottom of the drop-down list, and pass in the source window slows down the machine a little

  Is there a quicker way to switch?

  Even a keyboard shortcut would be useful...

  Thank you

  There are actually a multi-camera set view. You can add buttons to your monitor, the program for access to these or access the view with Shift + 0. If you click the sign icon at the bottom right of your program monitor, you can add recording and one button directly on his right to switch to the display of MC.

  To turn the cameras with a shortcut, you can press the number keys 1-9, and to cut the cameras during playback you can add Ctrl modifier to these keys. You can go into control panel shortcuts shortcuts keyboard and see what multi-cam already exist, and add your own commands that are not shortcuts already assigned to them.

• How to make a Multi camera track is always visible?

  I'm working on a sequence of Multi cameras.

  Let's say I have 13 titles in there:

  • 12 tracks are actual video clips
  • 1 track made of graphical overlays (as in Formula 1 Racing, with stuff like positions of rank, drivers, lap time, telemetry, etc...). This track is imported from legacy and has in it's alpha channel. This track is at the top of all the other tracks.

  I want the graphic track to be ALWAYS on, regardless of which track I select in blocking.

  This path must be on the INSIDE of the camera multi sequence and I can't get out of multi camera (for reasons of synchronisation).

  No idea how to do it?

  Some screenshots to clarify what I mean.

  Here's my multicamera Setup:

  

  Here is the final result. You can see the graphics overlay on video.

  

  It is not possible.  You need to place the chart outside of the multicam sequence so that it is always visible.

• First film edited with Premiere - proxy, audio questions and multi-cames

  I have several questions that I have not found in the videos and forums, at least not for my situation. I'm finishing the revision of sequences now adding comments in prelude and will begin soon to change it. Please excuse the long post.

  Background:

  I'm working on my first film, a documentary. Most of my work is 10-11 interviews, about an hour each. The majority is 4K Panasonic GH4, but some of the images is an Olympus MDGS EM5 II 1080.

  I recorded the sound using a LAV and a shotgun microphone, each goes in its own channel in a Tascam DR - 70 d, an external audio recorder, with a line going into the camera for reference. Audio and video files (at least one, since GH4 brings several) will have a slate tone to the head, created by the audio recorder. The recorder has captured the audio 24-bit, 16-bit audio captured camera. The recorder fooled also two other channels to lower 12db audio in the case of audio peaks.

  I will be changing on Mac laptop - 2013 MacBook Pro, OS 10.11.5, 2.9 Ghz Intel Core i7 memory of 16GB 1600 MHz DDR3, NVIDIA GeForce GT 650 M 1024 MB graphics card. I think I need to create my images 4 K proxies.

  All images is storage on my external drive of G. The interviews are separated and are located in the folders of each interviewee.

  The final project will be 1080, not 4K.

  Questions:

  Naming - being a hybrid, the GH4 breaks an interview of an hour in several separate files. Should I change the names of all files, or keep them in folders named in Premiere Pro? If I should change them, should I do it before swallowing?

  First synchronize audio and video, but since I have an audio file and several video files, I synchronize each video file individually or assemble them somehow, then synchronize? If each of these excerpts from the interview is sewn together, wouldn't that make editing more easy?

  When you create proxy for video files, also create proxy for audio files separate? Once synchronized, will be presented first the Hi output version of the resolution of the video and audio?

  Multicamera - in one case, I have an interview with two 1080 cameras. But for the rest, I've shot with a camera in 4K, so I intend to use a section cropped interview (zoom) when an important statement is mentioned, simulating a two cameras set up. Given that I have to create a sequence of multi camera after I ingest proxy files, first will be a problem activating/deactivating files proxy for the salvation of the res files?

  B - roll is added later, once the interviews are published about. It will be a few (not 4K) images and photos. Make the proxies of these too or first care to have all files proxy or a mixture?

  Finally, I have never edited a video which has been more than 10 minutes. This film could be of 40 minutes or up to 90. Everything I need to know to make the editing more smooth? I am a beginner!

  Thank you for bearing with me and thank you in advance for any idea!

  -SK

  1. allow only file names.  Make your organization with records (hard drive) and ferries (project).

  2. Manual of multi-camera method

  3. the audio files are small and will not need of proxies.  Export will always use the original media.

  4. possibly.  My first attempt was a disaster that froze the machine so badly, I had to do a hard reset.  However, you need not go back to the original of the sequence to make your cut-ins.  Proxy media will do fine work.  Simply place a copy of the plans at the 50% level in V1 and a second copy on the scale of 100% in V2 when creating the source multicam sequence...  Will allow you to see the full versions and then cropped the multicam editing.

  5. the photos no need of proxies.  If the B-roll change, make proxies for those.  PP not care a spirit to keep all the images the same.

  6. $ 2,000 custom PC vs $ 4,000 Mac Pro - YouTube

• All clips in my sequence of multi camera went black

  After spending a long time, editing a sequence of multi cameras, all the clips have now gone black. The waveform has disappeared, but the audio is not yet. Other clips on the same timeline, including another sequence mulitcam all seem to be good and I can't identify exactly where it happened in what concerns the measures I did.

  The last element in the sequence multicam has diagonal white lines through it. I don't know if this is related? Online forums suggest it's something to do with the insufficient media, but I don't really know what that means. The camera angle ends before the other, it's the only thing I can think of that would cause the white lines.

  I have attached some sceenshots I hope clearly the question - can anyone help? I'm desperate: I lost several hours of work! Thank you!

  I have it solved! (With the help!) It turns out that the original source multicam file has been deleted. I was able to return to a previous AutoSave and import it into the current version of the project and add a link to my sequence for it. So relieved to have solved this problem without having to re - edit. Thanks again for the help!

• I have a sound of HUSH with one of my multi-cam sequence

  Hello, can the French guy with poor English here, you help me?

  

  It's my 'main sequence' (I call it "Montage"), left I got a subsequence multi-cam of an interview, everything good about it but right, I also had a subsequence multi-cam of an interview and the sound is horrible, as you can see.

  Two days before I have had no problem and today when I load the project, I got that.

  To see what I have and I go to the sequence:

  

  No sound problem, not DAVID.

  Of course, I tried to recharge my project, restart the computer, load the project on another computer, but none of it worked.

  I have an old auto-save where I don't have the problem but I did a lot of things since...

  So if anyone has a solution or something I can try please help me .

  Thank you

  Try this:

  1. close the Premiere Pro

  2 delete the Cache files.

  3 Rename the folder containing the media.

  4 put updated to 2015.2

  5 reopen the project and link it to the media.

• Where is the drop-down menu which will distribute choose me multi cam to open different cams in the program monitor?

  I have a project of two cameras that I want to use the multi cam editing option.  Cannot find how to get individual cams open in the program monitor I can start cutting between them.

  The key offers that option as well.

• Multi cam, video and audio at the same time ditto audio video"editing.

  Hi everyone, I'm multi cam edit a project I have but you want to use the audio of each camera while the camera is on show, so, for example if I showed the images of the camera 1 I would hear the sound of the camera 1 and camera 2, then if I cut to camera 2 I'd like to hear the audio from camera 2 and not camera 1. Is this possible?
  When I put in place a nest for a multi cam it brings the audio with the video but does not seem to use it in the camera selection.

  Can anyone help?

  Thank you
  CJ

  

• Problem creating Multi Cam

  I'm having a problem around the creation of a multi cam.  I don't know how to explain it so I'll do my best.  I have a created a multi cam clip.  I'm cutting into pieces for a sequence.  The first piece I cut in the timeline went perfectly.  As a single green clip.  If I can edit seamlessly from camera to camera.  Now I have later in the clip camera Multi and train to cut another piece in the timeline.  There are two clips on top of the other and two beds audio now for some reason any.  What makes it more of a pain to switch between camera angles.  Why it does this now?  I'm sure that this is a user error, but I don't understand what is happening and I've done it before with number.  Any information would be helpful!  A PERIOD of really bad you need a very long piece today!

  Click the icon to the left of the magnet, the title sequence of the timecode.

  (By the way, there no such thing as a multicam in PP clip that uses nested for work multicam sequences.  Clips and sequences are different.  She supposedly has a multicam sequence.)

• Synchronization of four cameras with gaps in the timeline for multi cameras sequence

  I use Premiere Pro Trial CC to edit a multi camera concert. (The trial is just to see if the multi-came thing will work better than CS5) Since there is a limit of 30 minutes on four of my SLR, I have gaps in each of my deadlines of four cameras. All of these tracks were synchronized manually upward with a master audio track.

  In order to create a multi-cam sequence, I need to synchronize the video tracks 1-4, but so far have not been able to do. I tried to clips from each camera of nesting (so video 1-4 are all separate nested clips.)   I turn on the targeting of track for four channels of video and an audio track. Then I press 'I' to select a Point for the selected tracks. Not sure if this is how it works - just guess here.

  I then tries to 'Create Source Multi camera sequences' and tracks synchronization to aid 'In Points' on the nested five (4 video and 1 audio).   When I double click on the sequence of Source Multi camera to preview, I get four video windows appear, but the timing isn't right. It's as if they all were associated with at the beginning of the clip, not the markers that I put in front.

  So that's my problem. I can't synchronize these titles before creating a sequence of Source Multi cameras. I tried the synchronization of audio track, but it fails - too gaps to make it work, I think. I have no timecode. The only way I can think to do is to clip markers. Are some of these features disabled in the trial version?   Thanks for any help on this!

  MacBook Pro

  10.10.5

  Intel Core i7 2.8 GHz

  16 GB 1600 MHz DDR3

  NVIDIA GeForce GT 750M 2048 MB

  All of these tracks were synchronized manually upward with a master audio track.

  Then, with all your video tracks manually synchronize would with your audio master, you are ready. It would be a sequence with audio and 4 video layers. Now that nest, activate multi-cameras and turn on the multiple camera monitor in the program monitor and start your editing.

  --------------------------

  and if you want to try the other route-

  as for the creation of sequence of Source Multi cameras with points, place your points on your clips 4 source using the source monitor, you will only be able to get one on your audio files. That you establish for the created Premiere Pro sequence camera multiple source.

• I can't install my AD018640672 order number because you ask for the previous issue. Adobe came with my computer I don't have that. Can you help me!

  I can't install my AD018640672 order number because you ask for the previous issue. Adobe came with my computer I don't have that. Can you help me!

  Hi bobj39626549,

  We could certainly help you.

  If she asks for the previous version number, then you could acquire a version upgrade.

  You must purchase the full Acrobat version so that it can be installed and activated with the serial key.

  Hope that helps.

  Kind regards

  Ana Maria