Issuing Java.lang.NullPointerException after inactivity

Similar Questions

• Smartphones from blackBerry 8350i eception exception java.lang.NullPointerException after hard reset

  basic information:

  8350i

  v4.6.1.204 (Platform 3.0.0.73)

  Desktop Manager 4.7

  everything is good except that I was using two batteries, one in the phone and the other in a charger. When the battery is almost empty I swap with one charge naturally causing a hard reset.

  This procedure worked well for at least a week or two, until last month when I swapped batteries - after the hard reset, I had

  Eception exception: java.lang.NullPointerException

  I could make calls, but all other software were corrupted... practically nothing else worked... missing icons etc.

  tried all kinds of solutions, but the only thing that fixed it was a full-on device software erase/recharging, then a restore of data since the previous backup. at the time, I thought it was just something random and was happy to learn how to do a full charge of the software.

  then yesterday it happened again (even once, at the end of the security check immediately after the hard reset). now I'm afraid to swap batteries because it seems that every time I have hard reset it recharge a 10% chance (I guess) of corruption of software and a complete takes considerable time.

  If anyone else has noticed this? does anyone have a solution?

  can I change batteries without a hard reset; i.e. Exchange while that connected to the power supply? I have not tried this yet for fear of harming my BB.

  any help is appreciated,

  John d.

  15 seconds is too short period of time.

  It took at least a minute before returning the battery.

  Error you reported is related to badly written in device memory operating data.

  In most cases, helps to battery pull. But you must wait at least one minute before you put the battery on the device.

  When you do battery pull make sure that this device is not connected to any external device or the wall charger.

  In the event of battery pull does not help, I recommend to consider wiping the device memory.

• java.lang.NullPointerException after upgrading to 10.1.3.5.5 ODI

  Hello
  
  I've recently updated 10.1.3.5.0 to 10.1.3.5.5 ODI by applying the update rollup (Version: 10.1.3.5.5 |) Date: December 3, 2009 | p9200535_101350_Generic).
  
  Planning interfaces are work well after you apply the hotfix, but are NOT the interfaces that use Essbase.
  
  I get the following error when I run and the Essbase interface against a local agent.
  
  org.apache.bsf.BSFException: exception of Jython:
  Traceback (innermost last):
  
  "< String >" file, line 79, inside?
  
  java.lang.NullPointerException
  at com.hyperion.odi.essbase.ODIEssbaseDataWriter.validateLoadOptions (unknown Source)
  at com.hyperion.odi.essbase.AbstractEssbaseWriter.beginLoad (unknown Source)
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  at sun.reflect.NativeMethodAccessorImpl.invoke (unknown Source)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke (unknown Source)
  at java.lang.reflect.Method.invoke (unknown Source)
  at org.python.core.PyReflectedFunction.__call__ (PyReflectedFunction.java)
  at org.python.core.PyMethod.__call__ (PyMethod.java)
  at org.python.core.PyObject.__call__ (PyObject.java)
  at org.python.core.PyInstance.invoke (PyInstance.java)
  to org.python.pycode._pyx0.f$ 0 (< string >: 79)
  to org.python.pycode._pyx0.call_function (< string >)
  at org.python.core.PyTableCode.call (PyTableCode.java)
  at org.python.core.PyCode.call (PyCode.java)
  at org.python.core.Py.runCode (Py.java)
  at org.python.core.Py.exec (Py.java)
  at org.python.util.PythonInterpreter.exec (PythonInterpreter.java)
  at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:144)
  at com.sunopsis.dwg.codeinterpretor.k.a (k.java)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting (SnpSessTaskSql.java)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders (SnpSessTaskSql.java)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders (SnpSessTaskSql.java)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt (SnpSessTaskSql.java)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSqlI.treatTaskTrt (SnpSessTaskSqlI.java)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask (SnpSessTaskSql.java)
  at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep (SnpSessStep.java)
  at com.sunopsis.dwg.dbobj.SnpSession.treatSession (SnpSession.java)
  at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand (DwgCommandSession.java)
  at com.sunopsis.dwg.cmd.DwgCommandBase.execute (DwgCommandBase.java)
  at com.sunopsis.dwg.cmd.e.j (e.java)
  at com.sunopsis.dwg.cmd.g.z (g.java)
  at com.sunopsis.dwg.cmd.e.run (e.java)
  at java.lang.Thread.run (unknown Source)
  
  java.lang.NullPointerException: java.lang.NullPointerException
  
  at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
  at com.sunopsis.dwg.codeinterpretor.k.a (k.java)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting (SnpSessTaskSql.java)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders (SnpSessTaskSql.java)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders (SnpSessTaskSql.java)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt (SnpSessTaskSql.java)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSqlI.treatTaskTrt (SnpSessTaskSqlI.java)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask (SnpSessTaskSql.java)
  at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep (SnpSessStep.java)
  at com.sunopsis.dwg.dbobj.SnpSession.treatSession (SnpSession.java)
  at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand (DwgCommandSession.java)
  at com.sunopsis.dwg.cmd.DwgCommandBase.execute (DwgCommandBase.java)
  at com.sunopsis.dwg.cmd.e.j (e.java)
  at com.sunopsis.dwg.cmd.g.z (g.java)
  at com.sunopsis.dwg.cmd.e.run (e.java)
  at java.lang.Thread.run (unknown Source)
  
  ************************************************************************************************
  
  But I get the following error when I run an Essbase interface against a Word with agent TST_AGENT_1, manually created as a windows service:
  
  org.apache.bsf.BSFException: exception of Jython:
  Traceback (innermost last):
  
  "< String >" file, line 79, inside?
  
  com.hyperion.odi.essbase.ODIEssbaseException: error occurred while running script maxl. Error message is:
  at com.hyperion.odi.essbase.ODIEssbaseConnection.executeMaxl (unknown Source)
  at com.hyperion.odi.essbase.AbstractEssbaseWriter.beginLoad (unknown Source)
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  at sun.reflect.NativeMethodAccessorImpl.invoke (unknown Source)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke (unknown Source)
  at java.lang.reflect.Method.invoke (unknown Source)
  at org.python.core.PyReflectedFunction.__call__ (PyReflectedFunction.java)
  at org.python.core.PyMethod.__call__ (PyMethod.java)
  at org.python.core.PyObject.__call__ (PyObject.java)
  at org.python.core.PyInstance.invoke (PyInstance.java)
  to org.python.pycode._pyx0.f$ 0 (< string >: 79)
  to org.python.pycode._pyx0.call_function (< string >)
  at org.python.core.PyTableCode.call (PyTableCode.java)
  at org.python.core.PyCode.call (PyCode.java)
  at org.python.core.Py.runCode (Py.java)
  at org.python.core.Py.exec (Py.java)
  at org.python.util.PythonInterpreter.exec (PythonInterpreter.java)
  at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:144)
  at com.sunopsis.dwg.codeinterpretor.k.a (k.java)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting (SnpSessTaskSql.java)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders (SnpSessTaskSql.java)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders (SnpSessTaskSql.java)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt (SnpSessTaskSql.java)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSqlI.treatTaskTrt (SnpSessTaskSqlI.java)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask (SnpSessTaskSql.java)
  at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep (SnpSessStep.java)
  at com.sunopsis.dwg.dbobj.SnpSession.treatSession (SnpSession.java)
  at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand (DwgCommandSession.java)
  at com.sunopsis.dwg.cmd.DwgCommandBase.execute (DwgCommandBase.java)
  at com.sunopsis.dwg.cmd.e.j (e.java)
  at com.sunopsis.dwg.cmd.h.z (h.java)
  at com.sunopsis.dwg.cmd.e.run (e.java)
  at java.lang.Thread.run (unknown Source)
  
  Caused by: com.essbase.api.base.EssException: error occurred while running script maxl. Error message is:
  
  at com.hyperion.odi.essbase.wrapper.EssbaseConnection.executeMaxl (unknown Source)
  
  ... more than 33
  
  com.hyperion.odi.essbase.ODIEssbaseException: com.hyperion.odi.essbase.ODIEssbaseException: error occurred while running script maxl. Error message is:
  
  at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
  at com.sunopsis.dwg.codeinterpretor.k.a (k.java)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting (SnpSessTaskSql.java)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders (SnpSessTaskSql.java)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders (SnpSessTaskSql.java)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt (SnpSessTaskSql.java)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSqlI.treatTaskTrt (SnpSessTaskSqlI.java)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask (SnpSessTaskSql.java)
  at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep (SnpSessStep.java)
  at com.sunopsis.dwg.dbobj.SnpSession.treatSession (SnpSession.java)
  at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand (DwgCommandSession.java)
  at com.sunopsis.dwg.cmd.DwgCommandBase.execute (DwgCommandBase.java)
  at com.sunopsis.dwg.cmd.e.j (e.java)
  at com.sunopsis.dwg.cmd.h.z (h.java)
  at com.sunopsis.dwg.cmd.e.run (e.java)
  at java.lang.Thread.run (unknown Source)
  
  
  The MAXL script works fine from the command line in the shell to essmsh. Environment variables have been set up correctly for essmsh. Essmsh shell called command line.
  
  
  To apply the patch, I just copied the contents of the oracledi file present in the patch on the top application of oracledi existing ODI record. Let me know if I missed a step.
  
  Indications will be useful.
  
  
  Thanks in advance!

  This means that you have not imported into the new KM for "IKM SQL for Hyperion Essbase (data)", you always use the original and it will fail because the new version has additional options.
  Right click the KM existing - import/replace, then navigate to SQL IKM for Essbase data.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• BlackBerry Smartphones MySpace untrapped exception: java.lang.NullPointerException when you try to access the friends

  Curve 8330 Verizon Wireless

  4.5.0.77 (Platform 3.2.0.51)

  V1.0.0.29 AppWorld

  MySpace v1.5.0.12

  Facebook v1.5.0.32

  Was a problem with MySpace, found no messages/threads with this specific issue, if you are looking for help.  I noticed in the review for MySpace v1.5 on AppWorld Board there were other owners of the Curve 8330 has the same question:

  Whenever I try to view my friends list, add a friend, or look at someone from another friend list, the application crashes.  If I leave the app to do something else while it loads and try to re - open, I get:

  Untrapped exception:

  java.lang.NullPointerException

  Research on the forums for this error of java, most of the suggestions were to reload the operating system of the device such that it may be corrupted.  As an attempt to solve the problem, last night I upgraded to v4.5 v4.3.  When I have been upgrading completed, my MySpace, AppWorld and Facebook apps has shown under options > advanced > applications, but the icons could not be found.  I even searched the hidden icons and still no luck.  I used the destop application loader to remove these three applications in the device manager.  I then downloaded AppWorld from my (www.blackberry.com) device and once it has been installed it used to download and install MySpace and Facebook.  Once they have downloaded and installed, I turned off and only went to a battery.  Restarts, showed the icons and apps worked... except for the MySpace Friend list: same problem.  I don't remember when this error occurred initially, but I guess it was after the last MySpace app update.  Were not immediately thereafter, however.  I can access my messages, and the home page, but that's all.  I already sent an e-mail to [email protected] with no response

  Any help out there!

  MySpace 1.5.1.7 version is available for download!

  Curiously, the app started working properly a few days there with the exception of slow notifications, but not mistakes.

  Thanks for all your support!

• _ERR_COMMAND_EXCEPTION CMN3101E user, the system is unavailable due to "java.lang.NullPointerException".

  I just had some problem to be able to print a PDF file that has sent me a reliable source of the school. He could not open with precision and would not print. I was told a few undesirable and the part of it said:

  User CMN3101E the system is unavailable due to "java.lang.NullPointerException".

  I then Googled that and found the I needed to have the video drivers Intel and not the versions of MS due to some problems. I went through all this mess by using Device Manager and switched 2 pieces of diff for Intel drivers Intel and not versions of MS. I also did an UPDATE MS after a reboot to ensure that another MS Update would not reinstall certain versions of MS and if he found them I wanted to mark them for future IGNORES and ignore them now.

  Still no go. I need help big time. Does anyone for a small iJEFF help today¿

  Hi Jeff,

  1. What is the brand and model of the printer?

  2. is the specific question in the PDF? Have you tried other files to print?

  See the articles:

  Resolve PDF printing problems

  http://helpx.Adobe.com/Acrobat/KB/troubleshoot-PDF-printing-Acrobat-Reader.html

  http://www.Adobe.com/cfusion/search/index.cfm?cat=support&term=Java%2Elang%2ENullPointerException&loc=en_US&self=0&LR=en_US&product=Acrobat

  Let us know if you have other questions about Windows in the future.

• Exception: java.lang.NullPointerException untrapped blackBerry Smartphones

  When I start my BB, it gives me this untrapped exception: java.lang.NullPointerException message

  When I try 2 delete a call log number even

  dosent show me any more calls I madeit

  Hi and welcome to the forums!

  I have seen this error several times, usually with a corrupt address book.

  When you start the phone it reads the address book when you delete a call containing log

  you get a contact from the address book as well. Use the following procedure to resolve the issue.

  Thank you

  Bifocals

  "The software of the device or software component of application has not, or there is corrupted data of a synchronization cable.

  http://www.BlackBerry.com/BTSC/search.do?cmd=displayKC&docType=kc&externalId=KB04469&sliceId=2&docTy...

• BlackBerry Bold 9780 Smartphone - download failed: Null Pointer Exception: Java.lang.NullPointerException

  Hello

  When I get Whats app with pictures and videos and I try to open them... I get following message / warning - download failed: Null Pointer Exception: Java.lang.NullPointerException.

  Kindly help me.

  Thank you... Rishi

  Copy the contents of your data cards... After that format your card data, and the data will be deleted immediately... resolves your problem.
  I solved my self by doing this...

• HELP blackBerry Smartphones: intercepted the calls missed on the fritz, no Exception: java.lang.NullPointerException

  Hi all - I tried to figure this thing out of these last hours... and I'm about to smash my phone against the wall (of course, I've gotten nowhere with it).

  Here's the problem: about 2 days ago I noticed that my phone is no longer maintaining missing calls in the call log (the last "missed calls" are dated 3/22). Instead, what happens is that I'm going to take notice of the number of calls on my home screen, but then when I go on my call log, I see that calls that were actually sent or received and not those missed. Not long after that notice, the following message appeared: Eception Exception: java.lang.NullPointerException. Also, until this happened, I used to get a pop up after each missed call that would tell me that I missed a call and give me the possibility to display or dismiss the alert. Is no longer comes after he missed a call, so I think it's the functionality of java which was damaged.

  So I tried to pull the battery and all that jazz, but nothing has changed. At one point, pulling the battery caused the phone to give me some other errors of java and back to put on the original page of the home screen, but after removing the battery once more, everything is returned to my original problem. Only happened once. Today I finally decided to search online for a quick fix and I was thinking about something. I tried pulling the battery and remove the sim/memory card, then tried to re-sync, then try clearing the addressbook of device and re-sync, tried to backup everything, then checked more OS updates (mine is already the most recent)... and now I'm stuck. The only thing I have not actually tried is wiping and nine with a reload of the OS. I would really like to avoid this

  Also, for some reason after that the software update RIM has checked my phone for its version of the OS, my ringtone settings reset itself. Not sure if this is related to the java problem or just a chance to complication/bad?

  Does anyone have an idea what could have happened to my phone? It is literally out of nowhere, so you can imagine my frustration...

  Any suggestions on how to fix it?

  Yes, you will need to remove the current operating system, and reload later.

  The software seems to be corrupted.

  Make sure you have the latest version of the software for your device and your carrier installed on the computer.

  It's the device, software, not the Office Manager.

  Once done, go to drive C: Program Files: common files: Research in Motion: App Loader and double-click on loader.exe.

  Once the Welcome screen appears, plug the battery in and click Next. When you see the PIN number appear after maybe a few minutes press next.

  Once he arrives at the device application part, select only things you need, uncheck all other languages, etc..

  On the last page before you click on finish, you see an option "EITHER", click here and make sure that both check boxes are fixed.

  Do not press the save option and select Finish

  This will fix the problem.

• Smartphones blackBerry one other Exception: java.lang.NullPointerException uncaught

  Hi all - I'm new here, so please accept my clumsiness.

  My apologies to annoy everyone on this subject again; I have seen and read the thread where someone (of the Germany, like me) had the problem to constantly get the error Exception: java.lang.NullPointerException no message intercepted, but the proposed solution didn't solve it for me (or else, I was too stupid to understand). In addition, for some reason, the link given to improvements in T-Mobile does not work (I get the msg that it is an invalid URL).

  Some data:

  BB bold 9000 smartphone v4.6.0.126 (Platform 4.0.0.135)

  Carrier: T-Mobile

  tried battery pull, several times in fact, and it makes no difference.

  have you tried sms/email = separated under Messages, but only got the "untrapped" error message again.

  The trick to reinstall the device OS sounds good, but how do I go about this? (* daft *)

  I would be extremely grateful for the help; the at T-Mobile customer service said Friday (24) that technical support remember, but they have not yet and when I call them they just tell me to be patient, something which is becoming quite difficult.

  Thanks in advance everyone,

  Viveka

  Follow the exact procedure, originally posted by Bumblepie

  The software seems to be corrupted.

  Make sure you have the latest version of the software for your device and your carrier installed on the computer.

  Click here to get your carrier software - http://na.blackberry.com/eng/support/downloads/download_sites.jsp

  It's the device, software, not the Office Manager.

  Download and double-click to install you're your computer. Don't connect the device again.

  Once done, go to drive C: Program Files: common files: Research in Motion: App Loader and double-click on loader.exe.

  Once the Welcome screen appears, plug the battery in and click Next. When you see the PIN number appear after maybe a few minutes press next.

  Once he arrives at the device application part, select only things you need, uncheck all other languages, etc..

  On the last page before you click on finish, you see an option "ADVANCED", click on this button and make sure that both check boxes are fixed.

  This will fix the problem.

• Exception: java.lang.nullpointerexception eception blackBerry smartphones... Help!

  I get the following message at the start when I turn on my 9000.

  uncaught exception: java.lang.nullpointerexception

  Also, when I started this post I also couldn't get my missed calls! Very frustrating. Any ideas would be apprecieated.

  Check that this thread to solve:

  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=9500&thread.ID=36430&jump=true

  There is the same issue discussed.

  Check this box and post here can you solve your problem with this information.

• BlackBerry Smartphones erros message "Eception exception: java.lang.NullPointerException.

  each time after you restart my storm, the following message appears on the screen: "Eception exception: java.lang.NullPointerException.

  I think because of this error that my incoming and outgoing calls are not saved in the log call... I do the following steps:

  Phone--> call--> hit-->-->--> Call Logging Options menu key select all calls to show them in the list of messages...

  When I try to access the logs of phone call since the messages folder, the same error message appears. does anyone know what what can be?

  You can delete a phone log at the same time.

  Connect the device to the desktop computer.

  Start the BB Desktop Manager.

  Go to the backup/restore

  Hit the "Advanced" button, now find and click the button ' call telephone logs "in the list and press 'Remove' (or 'Clear') under the list.

• Error message from blackBerry Smartphones: Eception Exception: java. lang::NullPointerException

  I had a problem using whatsapp. So I deleted the program. After the reboot, I get the message: Eception exception: java.lang.NullPointerException. I had to press the OK button to access my handphone. Now, I can not download whatsapp. I get the same message. You will appreciate all the assistance. Thank you

  OK will try. Thank you.

• BlackBerry Smartphones Eception Exception: java.lang.NullPointerException

  Hello

  My BB 8220 flip has always had battery problems. Lately the battery dies after only 8 hours in standby mode. The last time he died was two days ago, and after four hours of charging it finally turned back on - only to have the error "untrapped Exception: java.lang.NullPointerException' on-screen display.»  I noticed that now, the call log does not work for incoming, outgoing and missed calls.  The SMS also mysteriously disappeared, so I am not able to send and receive texts.  My address book is still intact.  I did not so I don't have all the additional applications on the phone, just that it came with a data plan.  I tried to restart (remove battery) several times, but the error has not set itself.

  Simple ways to correct this error, or is my phone forever?

  Hi and welcome to the Forums!

  Given your description, I would recommend a reload of the OS or upgrade. From a PC, you can install any bundle of BONES to a BB via this procedure:

  • http://supportforums.BlackBerry.com/T5/BlackBerry-device-software/how-to-reload-your-operating-syste...

  Note that although written for "reload", it can be used to upgrade, downgrade, or recharge - it depends on the OS package you download and install on your PC. You can even use a different OS package carriers simply insert, between steps 1 and 2, the deletion, on your PC, a file named PROVIDER. XML. remember that you remove from your PC, no matter what other packages devices OS BB as having more than one installed on the PC can cause conflicts with this procedure.

  If you are on a MAC, you are limited to only your sanctioned carriers OS packages... but can still use any level they currently have to sanction. See this procedure:

  • KB19915 How to perform a clean reload of the smartphone BlackBerry using BlackBerry Desktop Software application software

  Good luck and let us know!

• Smartphones blackBerry eception exception: java.lang.NullPointerException &amp; default Services

  I got a Blackberry update notice for my handheld.  I think it's 5.0.0.973.  The update also includes an update on all the applications I had on hand held.  After the update, I had to go and connect to my other apps.

  The big problem is I lost by 'Calendar' in my default Services", I can't synchronize my contacts with google sync and I every time that I reboot I get message not caught exception: java.lang.NullPointerException. »

  BlackBerry is no help at all.

  Is it possible to reinstall my systems software without going to Sprint?  I tried to download the software of systems as if I had no provider, but it reads like a file and will not be installed.

  Help

  I went to Sprint and they have wiped the system and I down loaded by calendar & contacts of my Google Acct, which is much better than iCal.  I no longer get the message "of the United Nations taken exception... »

  So some little glitches seemed to stop also.

  The only problem I get now is that I can't get my email envelop to appear on the home screen. only the "Message" envelope.

• EPM 11.1.2.3.500 - book of financial reports error:; nested exception is: java.lang.NullPointerException

  Hi all

  We have up gradation of EMP 11.1.2.3.500 11.1.1.3.

  We have financial reports book for HFM.

  When we right click on the books and select 'complete book as PDF', we get after that error

  "the nested exception is: java.lang.NullPointerException.

  

  

  any idea?

  Kind regards

  Dattatray - Mate

  Hello

  We have solved this problem as follows,

  1. open this book report

  2 remove the reports within the book.

  This is how it works for us

  Kind regards

  -Matt Dattatray