Istall printer Photosmart C5140 depends on the SNMP response.

Similar Questions

• Printer Photosmart C4599 fell into the error mode "printer offline".

  Seemed to start after that ATT came home to tune up our internet service by adjusting the wireless channels.  Of course, they deny that they had anything to do with the printer.

  Printer does not print.  jobs stack in printing (QC) I ran the "wireless network test report" and I got a "failure" on the name of the SSID network not found.  I don't know what that means.

  Help!  I went to Best Buy and they said they do not even bother to work on printers or even help out them.  Buy a new printer is advice

  In case of failure.  Means that you are not connected to your routers SSID with password.   IF they changed the channel change it back and use channel 1.   Reset your printer to the default network via the front panel.

  To restore the default settings of the network
  1. press the button wireless on the product.
  2. press the button next to the down arrow on the display until restore network
  Defaults is highlighted and press OK.
  3 confirm that you want to restore the default settings of the network.

  Now connect your printer to your network using your printer USB cable and re-run the installation CD.  If no CD, download on the website of HP here.

  http://support.HP.com/us-en/drivers/selfservice/HP-Photosmart-C4500-all-in-one-printer-series/3575173/model/3757821

  Use the drivers and fully functional software.

• Why my printer Photosmart C would prevent the selected print areas in Excel 2010?

  I need to print selected areas of my worksheets on a regular basis.  When I try to do, my printer only prints the first column and don't know anything about the reset of the selected area.  I tried zone print setting in Excel.  Does not work.  Shy of reinstalling the driver, what can I do to rememdy this problem?

  Well, according to the information I found the issue isn't with print but in Excel software. Here is a document on how to print a selected area in Excel:

  http://www.howtogeek.com/HOWTO/10451/print-only-selected-areas-of-a-spreadsheet-in-Excel-2007-2010/

  Is that what you do that deviates from this? Were you able to make an impression of a selected from any other excel file area? Also, what are the contents of the cells you want to print?

  Let me know and I'll do what I can to solve this problem for you!

  Have a great day!

• Printer Photosmart B109n

  Hello, can you tell me if the printer Photosmart B109n will take the 364 black Photo ink cartridges?  I bought one, but don't seem to be able to embed it in the cradle.

  Thank you very much

  Ian

  Thank you, you are right.  Don't understand why they number the same photo cartridge that normal black ink - did not know up to what I had opened the package that I had the wrong.  Very frustrating, especially since I won't be able to return it!

• Photosmart 5524: MGP1CN1610AR update the Firmware on HP PhotoSmart 5524 on September 14, 2016 broke wireless printing

  I have a question which I believe is related to the MGP1CN1610AR firmware update that was released on September 14, 2016 and auto installed on my HP Photosmart 5524.  Since the update I can print is no longer my laptop Windows 10, or my iPhone with iOS 10.  I can, however, send an e-mail to my HPEPrint account and this shows with success - which proves that the printer is connected to the internet and WiFi.

  My network is provided by my BT HomeHub 5 with BT infinity.  The status of router, the printer displays intermittently as connected then disconnected.  This is since the update of the firmware.

  Is it possible to restore the firmware on the printer? OR is there a known solution to get my WiFi printing works again.

  Hi RTD_HPUser,

  Thank you for your answer!

  I'm glad you found a solution that worked for you. About the firmware, as long as the Web service is enabled, you can select the icon Web Services, settings, and then select printer Update, then the update is automatic, and turns off. This will prevent the firmware update on the printer.

  If you are unable to reach a resolution, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

  I hope that answers your question!

• Photosmart Prem C310: Printer does not appear in the list of printers - but is on the list of devices and printers

  I'm used to be able to print perfectly in any program.

  Now, I can print from Gmail - or I can print from this forum, however in Publisher or Word, or a genealogy program I use, the Photosmart is not one of the available printers listed.

  When I go to Device Manager, I can right click on all the printers I have and see a long list of options, such as set as default printer.

  But on the Photosmart, I right click and only get 4 options; create a shortcut, troubleshoot, remove the device and properties.

  I downloaded new printer drivers and went through Assistant support, rebooted, unplugged and replugged etc.

  I can't understand this one!

  Hello
  
  Thank you for using the HP Forums. You can try the following:
  
  Please download and run the HP Print and Scan Doctor (PSDR) tool to diagnose and solve your problem
  
  http://h20180.www2.HP.com/apps/NAV?h_pagetype=s-926 & h_lang = on & h_client = s-h-E016-1 & h_keyword = DG - PDU
  
  Hope that helps.

• Default AirPrint of reversal of the rather long and short side (printer Photosmart 5520)

  Hello

  When I used to print from my iPad via AirPrint on both sides on my printer HP Photosmart 5520, it used to print, so that you may browse on the long side. For some reason, it changed to printing, so it switches to the short side.

  How can I change by flipping on the long side?

  My son has discovered a fix for this problem. We have now tried on three iPads and whenever he has set.
  The solution is to disable double-sided printing in the options when you are about to print a document and then turn it back on.
  After that the only time anything printed duplex will be sharp long printed not short edge.
  It is not a rocker, I can't get my iPad to print double-sided on the short side now (not that I want to), for some reason once you turned two-sided printing off and on again, long-back becomes the permanent default.
  Weird!
  
  P.S. He arranges for all applications.

• HP Vivera Photosmart 3210: EXPIRY of the INK. can buy black ink only and print n & B with the range of printers hp Vivera 3210?

  all ink has expired. can I buy only black ink and print n & b with hp Vivera printer, photosmart 3210 all-in-one

  and black and white printing only with color expired ink in there?

  Hi @peanut7949,

  I believe, with this model, you can continue printing with inks has expired. That being said, if you replace only the black ink and continue to print with others (expired), it should be fine.

  Here's what I could find on the subject:

  Each ink cartridge has an expiration date to protect the printing system and ensure a good quality ink. The cartridge expiration date appears on line 53 of the free test report.

• HP Photosmart 7520E-all-in-one: black prints fine for text but the black areas in photos come out green

  Black ink works very well for text and text with little color, but when you print photos (on HP Advanced paper which is recommended), printed black areas aqua green, or deep.  Other colors are fine.  How can I fix it?

  The probable cause is a cartrdige Photo print does not correctly.  In the paper here troubleshooting steps can help solve black photo print does not correctly on your printer Photosmart 7520.  The Photo cartridge is on the far left of the printer.

• I had upgraded from mac to 10.11.3 & now my printer wireless HP Photosmart D110 All in One Printer is disconnected because of having Mac sleep for a long period of time.   How to connect the mac to the printer wireless?  I have the apple extreme route

  I have a HP Photosmart D110 printer got Mac upgrade to El Capitan 10.11.3.   As I had sleep mac for a long period of time, it seems the printer and computer (Wi - Fi) has been disconnected.   Now I can't print.  Need help reconnecting the mac with the HP wireless printer.

  What happens when you reboot both machines.

• HP Photosmart C6280: cannot print on C6280 wireless after the upgrade to Windows 10

  Cannot print on C6280 wireless after the upgrade to Windows 10. Have removed the device, but try to re install the printer when is not found. Can print if I connect USB. Tried to reload the driver using HP Support software help, but when he arrives at the end of the download fails.

  Hi @Ron9871,

  Welcome to the Forums of HP Support!

  I see that you are unable to get your printer HP Photosmart C6280 wireless printing. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I would like to try the steps in this guide, "offline" Status Message printer (Windows 10).

  If the problem persists, you may encounter an IP address conflict. It's a good idea to assign the printer a static IP address outside your DHCP range. For example, some routers default DHCP is located between 192.168.0.100 to 192.168.0.200. So, I would use 192.168.0.232.

  • Print a Page of Network Configuration menu of the printer front panel. Note: the IPV4 IP.
  • Type the IP address in the browser to bring up the SAP.
  • Choose the network tab, then wireless on the left side, and then select the IPv4 tab.
  • Select Manual IP.
  • Enter your IP address manual (192.168.0.232)
  • Enter 255.255.255.0 for the subnet mask, except if it is different.
  • Enter the IP address of your router that sits on the Network Configuration Page) for the default gateway.
  • Please, click on manual DNS server. For the preferred DNS Server Manual please enter 8.8.8.8 and the Alternate DNS Server Manual, please enter 8.8.4.4.
  • Click on apply.

  Please restart the router, the printer and the computer in this sequence.

  If you're still having problems, please download and run the print and Scan doctor, it will be probably diagnose and fix the problem you are experiencing.

  What were the results when you ran the Print and Scan Doctor? (she print or scan, error messages)

  • Use the File Checker system to repair missing or corrupted system files. It's always a good idea to back up your data before proceeding.
  • File system check (SFC) analysis and repair system files & DISM to fix things that are not SFC.

  You can try to change your WSD printer port by a Standard TCP/IP port.

  To do this, you will need your current IP address printers.  The Network Setup page shows the parameters of network for the product. To print this page; Press the button of network () on the control panel of the product.

   

• My Photosmart Premium stopped printing yellow or green on the photos! With the help of HP ink cartridges

  My Photosmart Premium All in One C410a is now printing photos that go far too not blue - no yellows or Greens.  Use the HP cartridges, and all are at least half full.  Help! A perfectly printed in the past.

  I am trying to print from iPhoto, which Ive done hundreds of times and am on premium glossy inkjet photo paper (a new package, incidentally).  I have not changed the settings recently when printing.  Flash Info - just ran a report of print quality and also checked the settings.  Then I printed the same image that I had tried before, and it seems very well!  Have no idea why, but it looks like Im back in business! Wahoo.  Thanks a lot for me having to check so many places.  Must have done something right just now!

• HP Photosmart 5520: cannot find the printer

  Until last night I only had intermittent problems, using the scan on HP Photosmart 5520 function.  Then all of a sudden not analyze or print work - message there.  MacAir displays the RED DOT printer offline, by default.  The printer has remained non-connected.  I restarted MacAir.  I have turned off HP 5520, unplugged the wire to plug in a normal machine (of an extension of protection against overvoltages).  On reboot I have always run.  I then tried wireless live - without success.  Then, I removed the 5520 HP of the MacAir intending to reinstall.  To attempt to reinstall Mac Air is unable to find a printer.  The HP 5520 wireless network test results show no problem.

  Please notify.

  Problem solved.

  I turned Mac Air, printer and router off and restarts.  It worked.  The problem was the router!

• Photosmart 7960 installed via the USB port on the PC under Win XP Pro acting as a print server

  I have a PC running Windows XP Pro, which acts as the home network file and print server.   The Photosmart 7960 is connected to this computer via a USB cable and configured to be "shared".   When I go to "Add a printer" on another PC, in Windows 7, which is also part of the same network, I can navigate to the 7960 correct, but the installation wizard is unable to find the driver for Win 7.  I still have what in the HP see basic documents that tells me how to add this shared printer on my Win 7 PC.  Looking at the support page drivers I saw that Windows 7 already has the driver.  True, but the only way, it seems that I can get to it is to connect the printer directly to Win 7 PC via a USB cable.   Any suggestions?

  Apparently, the solution is as follows.  First connect the photosmart 7960 directly to the PC running Windows 7 via USB cable network.  It will be auto-install drivers.  Reconnect the printer to the PC under XP pro server.   From the PC running Windows 7 where you have installed the printer via USB, you can go ahead and remove the photosmart 7960 from the list of printers; This will not remove the just downloaded drivers.  Next, select Add a printer, and then select 'Add a local printer' (no network).  Select 'Create New Port' and click Next.  In the next dialog box, type the name of the host server and the name of the printer.  In my case, it's \\mainserver\HP photosmart 7960. Click Next.   In the "Install the printer driver" dialog, click "Hewlett Packard" and find the 7960 in the printer list and click Next.  I was able to successfully install the printer this way.

• Photosmart Premium C309-g: the drivers and the printer software will not be installed.

  My network all-in-one Photosmart Premium C309-g worked very well on my desk until recently, when suddenly the HP software could still see and connect to the printer, but Windows 10 could not. I tried to remove the printer and uninstall all associated software, then tried to reinstall the software. Unfortunately, the installation will not get to the point where it starts and then suddenly disappears with no trace of her still running in the background. I can deviate from the default installation and bring to the top of the page to select the components that I want to install, but when I do the button 'ok' on this page does not work. No matter how many times I click on it, the page remains open and the installation will not so fast. If I click Cancel on this page, it disappears and the installation back to the previous page, where I can choose to continue and happen almost immediately out of sight again. This happens whenever I try to install selected software and drivers. I deleted the printer from the devices page in the Panel, I made sure to this it is not is more listed in the Manager of peripheral devices (printers and imaging devices), I removed the Windows 10 print queue and I deleted all the data of the folder under the Program Files (x 86) HP folder on my hard drive. I also disabled Windows Defender and run the installer as administrator, yet none of these steps help the process at all. I have never, in my 20 + years using nothing other than printers HP, encountered a problem like this. I'm used to receive error messages during the installation of software to fail, but I have never had a process simply disappear from the computer without leaving any trace of never having run. I hope that someone out there has an idea, that I have not thought yet, transferring files to my tablet to print from becomes a pain in the rear.

  A man who took the freedom of another man is a prisoner of hatred, he is locked behind bars of prejudices and narrow-mindedness. I am not truly free if I take freedom away from someone else, as surely as I am not free when my freedom is taken from me. The oppressed and the oppressor similar are stripped of their humanity.
  ~ Nelson Mandela

  Welcome to the HP Forums @GarfieldFan1969,

  I understand the printing software will not fully installed for your Photosmart C309 on your system Windows 10, and I wanted to answer with my suggestions for trying to help! Here are my suggestions for you to try. When you are finished, please let me know the results and problems or errors that you may encounter!

  First step: clean boot, restart the PC and try the install again.

  1. start by typing "msconfig" in the search box of Cortana, and then click MSConfig (run command)
  On your keyboard press Windows + R key at same time and type Msconfig in the run window, and then click OK or press ENTER.

  2. now, choose Selective startup

  3. Remove the check of the Load Startup items

  4. click on the Services tab

  5. check "hide all Microsoft Services" and then click on disable all

  6. click apply , then OK

  7 restart the PC and temporarily disable firewalls or antivirus programs

  8 run the Installation Wizard for Windows HP printer to install the printer

  9 turn on the firewall and start services

  Second step: you unregister and re-register the Windows Installer Service:

  1. hold down the Windows key + R to fill the box "Run" and type cmd.exe, and then click OK.
  2. at the command prompt, type msiexec /Unregister , and then press ENTER.
  3. at the command prompt, type msiexec/regserver, and then press ENTER.
  4. at the command prompt, type exit and press ENTER to close the command prompt.
  5. run the Wizard for Windows HP printer installation

  Step 3: run System File Checker Scan (up to 3 times) to repair the corrupted system files:
  1. go to start
  2. type CMD
  3 right-click and run as administrator
  4. to check and repair the OS type sfc/scannow (note the space between sfc and ' / ')

  You may need to run this upward to 3 times to solve all the problems

  When finished, it will say one of three things
  Windows did not find any breach of integrity (a good thing)
  Windows resource protection found corrupt files and repair the (good)
  Windows resource protection found corrupt files but was unable to fix some (or all) of them (not a good thing)

  Try to reinstall the printer.

  Step 4: activate the built-in Windows administrator account

  source

  1. first of all, you'll need to open an administrator mode command prompt by right-clicking and choosing "run as Administrator" (or use the shortcut Ctrl + Shift + Enter in the search box).

  Note that it works the same in all versions of Windows. It just search for cmd and then do a right-click on the icon of the command prompt in the start menu or the boot screen.

  

  2. If you are in Windows 8.x or 10 you can click on the Start button and choose to open a command prompt in this way.

  

  3. now type the following command:

  NET user administrator / Active: Yes

  

  4. you should see a message that the command completed successfully. Log out, and you will now see the administrator as a choice account.

  (Note that this screenshot is for Vista, but it works on Windows 7 and Windows 8 and Windows 10)

  

  You will notice that there is no password for this account, so if you want to leave it enabled, you must change the password.

  Try to reinstall the printer.

  

  Testify of my answer by hitting the thumbs to the top slot

  Click on the button "Accept as Solution" if I helped you reach a solution.