It just does not allow me to view some internet site, stating that my internet is not connected

Similar Questions

• New router, HP Deskjet 3050 J610 Series just does not connect.

  Hi, I have a big problem here. I have really great things to print and the day that it must happen, I went to Verizon and they gave me a new router and I completely forgot that he would have an effect on the printer. Basically, I tried all in my eyes. I went to the configuration / printing software and he found the router and I entered the router password and then I get this really unpleasant message:

  The printer is located on your network, but the network software is unable to find using the classic network discovery method. You can install the printer and it works normally on the network using the IP address of the printer.

  So, I clicked on 'Help' and I went and saw that my IP address on my printer did not match the one that says my computer. So, I advanced and updated and repeat the same process as I did before and I get the same thing. I click on the "convert USB printer wireless" and follow the instructions and I get the message that I mentioned above. I have my firewall turend off and I restarted my computer several times. Blue light next wireless also blue lights now and not just constantly blinks. I don't understand, is that I also cannot print when plugged into the USB port? When I try to print and I go to the box that says this is ongoing print, it shows error beside him. I have also already all the software installed on the computer since I was able to use it without problem with the old router unless I need someone re - install.  I really need these papers, and they are already more regular. I have to call someone to come and if I can't get a quick solution here. I hope one of you can help me, thanks!

  Printer does not keep the wireless connection.

  http://support.HP.com/us-en/document/c02817031

  Step 6 to set the static IP address

• Satellite L300 - does not connect to wireless internet

  I have a satellite L300 (part No.: PSLB8A-0SN004) took me right back to the factory settings (out of box).

  I opened internet connections and all the usual wireless names were there.
  I tried hang my internet (wireless) home and tried several times, with the correct password, however it just does not connect.

  I tried to install the Realtek RTL8187B Wireless LAN driver both Atheros Wireless LAN Driver, but neither helped.

  The Wi - fi switch on the front is also in position to position IT. Please help I have to up my laptop up and running as soon as POSSIBLE.

  > I tried to install the Realtek RTL8187B Wireless LAN driver both Atheros Wireless LAN Driver, but neither helped.

  If the wireless network adapter is recognized in Device Manager, you n t need to install the WLan driver.
  In addition, you said that you can see the wireless networks available in your environment. This means that the WiFi is enabled and works

  I think that you should disable the WiFi settings (WEP, WPA, etc.) only for testing purposes and should try to connect the laptop to the network open, if possible, that means that you badly chosen encraption or the password.

• New router, same info. Printer does not connect. Help?

  I have a printer all-in-one Officejet 4620 wireless. I have a new router (the same brand and model brand new), and none of my info has changed. My printer does not connect to the internet more. Always has the info saved just does not connect. I had to re - enter the password in all my other wireless devices, but how do I do on this printer? I'm sure it's my fix. I have searched all over the Control Panel, all the web help HP, used the scan doctor and even called HP and they said that my warranty is out I have to pay for my support. Still an issue like this... Was a bit irritating. Or if I have to reset the printer to the factory and Redo setup wizard is too cool. I tried this one on board printer under network without success. Any help on this would be great! Thank you!!

  Let's try here.

  Replacement of your wireless router

  http://www.HP.com/global/au/en/wireless/reconfiguring-system-Help3.html

• Centro does not connect to the synchronization with Windows/Palm HotSync

  My Centro ceased to sync with my Windows XP computer.  It just does not connect.  Did the soft reset, restart windows, etc.  No problem in Device Manager.

  The value of sync with outlook on the exchange server data.

  Same Centro and sync cable fine on the Linux machine using gnome-pilot and lines of development to access the same data exchange.

  Assuming that you can navigate through your windows machine.

  1. open Device Manager
  2. when your device is connected, you will see palm os handheld
  3. click straight and say to uninstall the driver
  4 disconnect your device and soft reset it
  5. reconnect the appliance and leave it to reinstall the driver

  This will force reinstall the driver and also tell us if there are errors with the driver.

  Message relates to: Centro (Sprint)

• I just got a new modem (Arris SB6190) and now my Airport Extreme does not connect.  It worked fine with the previous modem (a rented one TWC).  Help!

  I just got a new modem (Arris SB6190) and now my Airport Extreme does not connect.  It worked fine with the previous modem (a rented one TWC).  Help!

  Always recommended to reset the airport back to settings by default and then set up again whenever you have a new modem or change your Internet Service provider.

  Turn off the new modem for at least 30 minutes. More is better.

  Perform a hard reset on the AirPort Extreme, then it turned off.

  Make sure that the Ethernet cable connects the modem to the "O" on the AirPort Extreme WAN port

  After the power of the modem 30 minutes down, turn on the modem and let it run for at least 5 minutes by itself.

  Then, turn on the airport and let it run a few minutes

  Set up AirPort Extreme again

  Important note... There are many reports of problems with the modem Arris SB and airports. Both are great products, but they do seem to work perfectly together for some users.

• Why my hotspot does not connect to my iPhone6? I just used it on right Friday night before I downloaded the 9.2 IOS... Anyone having problems?

  Why my personal hotspot does not connect to my iPhone6? I just used it on right Friday night before I downloaded the IOS 9.2 update... Anyone else having problems?

  http://www.application.Update/9.0.2

• I just installed a new router and now my desktop running Windows XP computer does not connect to the internet.

  Hello

  I just installed a new router and now my desktop running xp computer does not connect to the internet. I know that it is not the router because I plugged the cable into my laptop running 7 and it works fine. When I try to dhcp I get 169..., when I put manually the IP just get no access to the internet and can not ping to the router address. I tried to run the net work Assistant, emptied my dns, disabled all firewals, still nothing.
  Any suggestions?
  original title: connectivity Limeted

  The zero configuration utility works very well. But it is a desktop computer and on cable. All other wired and wireless PC in the office is working well, then it's definitely this PC. He came out of nowhere, I install a network printer on the PC but that's all.

  Your messages are a bit terse, but if I understand correctly

  • You have a router connected to the Internet and multiple computers connected to the router, some Ethernet cable and others by wireless.
  • All but one of these computers can reach successfully from the Internet via the router.
  • A computer that can't browse the Internet is connected to the router via an Ethernet cable.
  • You disconnected the cable between the router and the desktop problem and connected it to a Windows 7 laptop and the laptop connected to the Internet via the router.
  • You haven't seen any error message (except, perhaps, a message on "Limited or no connectivity").
  • You have installed Windows XP Service Pack 3 (or at least Service Pack 2)

  Assuming that all the foregoing is an accurate summary of the situation, I suggest that you do the following:

  Open a command prompt window (start > run > cmd > OK)
  Type the following lines and press ENTER after each line

  Netsh reset winsock catalog
  netsh int ip reset c:\resetlog.txt

  Close the command prompt window and restart the computer.

• does not connect to allow to export a PDF file to a Word document

  does not connect to allow to export a PDF file to a word document

  Try to do it here: https://cloud.acrobat.com/exportpdf

• Firefox does not connect to any Web site, but other browsers will.

  When I get something in the URL- google.com, localhost, http://127.0.0.1/ one bar the IP address, there is a fraction of a second flash, then the bar becomes empty and nothing has changed. It seems that Firefox is not even try to connect to the internet.

  Yesterday, everything was fine when I was running FF on Windows 7. After the upgrade to Windows Pro 8, Firefox has failed. I've updated for Windows 8.1, hoping for the best, but it's the same problem.

  I've walked by the firewall program, several times (the only race is the built-in Windows Firewall). Finally, I uninstalled Firefox, including all my settings, custom and reinstalled from scratch, twice. And even this version pure and clean Firefox does not connect to the internet.

  I am a computer web developer and would be happy to look at the log files or run a tool (Fiddler?) to see what happens at a low level, if I only knew where to look.

  john99, thanks for the links. I went through all (again), one by one. The last link kb.mozillazine.org/Standard_diagnostic showed me what helped. I've renamed "firefox.exe" to "firefox1.exe" and was able to use firefox.

  It made me suspect the firewall or malicious software. I ran a Malwarebytes full scan, zero problems detected. I have pored on the entries of windows firewall, the "Windows Firewall with advanced security" view and also the simple control panel view. The only mention of Firefox is that I continue to add and remove to allow firefox through.

  Here I knew what was going on, but for now, I can at least use firefox. How frustrating!

• iTunes does not connect with my iphone 6

  I updated my phone and itunes for recent versions, and when I try to connect my device with itunes, it does not connect. My computer says that my phone is connected but my itunes doesn't work. When I connect my phone, a notification appears saying "allow this device to access the photos and videos? Nothing appears saying "approve this computer? I restarted my computer several times and my phone but it still does not connect. I tried the update of the driver portion, but he says it's updated, but when I go to view the file "Apple Mobile Device USB Driver" it does not appear on my computer.

  Have you tried the following steps:

  If iTunes does not recognize your iPhone, iPad or iPod - Apple Support

  If so, you may also want to see excellent iTunes to turingtest2 for troubleshooting Windows guide to:

  Troubleshooting problems with iTunes for Windows updates

  especially the chapters containing Apple Mobile Device Support.

• T40 2373-8AU does not connect

  I was givin a free t40 requiring a hard drive. I had a hard drive and install windows xp on it yesterday and it does not connect to the internet. I don't know what wireless driver I need so I tried the 5 for xp and none of them does not work. I use linux on my computer but im sitting it for my wife so he must have windows on it.

  Help, please

  Thanks for the help. I now have wired internet and allowed to activate windows and update the thinkpad access program. don't have wireless but once I have sp3 and sick or update windows, I may reinstall it because I can get it online now.

  Thanks again

  EDIT - just install the driver through windows update wireless and now have wireless access

• WiFi does not connect to the home network

  IM currently problems with my wifi on my new z3 compact network.

  My compact z3 is able to find the wifi network & shows an excellent signal, I get the password to try to connect but just z3 keeps alternating between safe, secured with wpa/wpa2 & getting ip address...

  I tried to reset the router, phone that allowed me to use wifi, but a day later I'm back to the problem off z3 does not connect to wifi. All other devices connect without any problem at all.

  Any help would be appreciated & ty in advance.

  Do you know if there is no limit on the number of devices that you can connect to your ISP network and the internet? Also make sure that DHCP is enabled in your network and you do not have any MAC-filter in the network.
  Alternatively, you can try to manually specify an IP address that can be used in your network in the phone. Tap and hold the network, select Modify network, then check Show advanced options and set a static address.

• LaserJet P1102W: [RESOLVED] LaserJet P1102W does not connect to a wireless network on Mac

  UPDATE: the below solution worked on my MacBook, both running El Capitan. Ignore the instructions provided in the manual of the P1102W and follow the steps below.

  I have a P1102W printer.

  Recently my LaserJet P1102W refuses to connect to networks using WPA Wireless.

  As it does not have an IP address, I can't access the web server.

  She also does not connect to my Mac Wireless via Bonjour. The printer will install when connected via USB.

  I installed printer HP Apple drivers, that contains the P1100 driver.

  The P1102W worked before wireless. I only noticed this anomaly since installation El Capitan and moving the printer to another room with my workstation.

  I need the printer to use the wireless network, as I did not have enough space on my desk for him. And I just can't place it anywhere within the range of a USB cable.

  Are there alternatives to this?

  Hi @rcosgrove,

  Welcome to the Forums of HP Support!

  I see that you encounter some problems connecting your Laserjet P1102w printer to your network wireless using your Mac computer. I can help you with that.

  First of all, I would like to mention that it would be easier to the printer connected to your network using a Windows PC. If you can't borrow or use a Windows PC, the following steps should allow you to connect the printer. If you can borrow a PC, please let me know what version of Windows and I can provide a link to the drivers to configure the printer automatically.

  Preparation of the printer

  1. Turn the printer off.
  2. While the printer is turned off, hold down the two buttons on top of the printer.
  3. Hold the buttons on top of the printer and the printer.
  4. Hold down the maintained for even 10 seconds.

  Wireless printer setting

  1. Make sure that the printer is connected to your Mac via the USB cable.
  2. Click on your Apple icon, system preferences and printers and Scanners.
  3. Click the icon of your printer on the left.
  4. Click Open print queue, printer installation, utility of printer, open printer and HTML Config utility.
  5. (If the above step generates an error, change your default browser on Safari. Please let me know if you need assistance with that).
  6. In this new window, click on the networking and wireless tab on the left.
  7. Under Mode of Communication, select Infrastructure.
  8. Select your network from the list and then click on the button with the arrows.
  9. Under Security Mode, select WPA/WPA 2. If you have an old router, you may need to select WEP instead.
  10. Enter your password wireless in the field below.
  11. Click on apply.

  Now, wait a few minutes. Your printer must change to have a solid blue light. If it is not the case, either the password has been entered incorrectly or there is a setting on the router that the printer is having a resolution of the issue. Please let me know if this is the case.

  Once you have a solid blue light:

  1. Unplug the USB cable.
  2. Return to the printers and Scanners.
  3. Hold down the CTRL key and click the icon of the printer on the left.
  4. Click on reset printing system.
  5. Click on the button "+" in the lower left corner.
  6. In this window, select your printer in the list.
  7. Click in the box next to and select your printer from the list.
  8. Click on Add.

  Please let me know if you are able of print or the results after following the above. If you can print, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

  I hope this information is useful. Please reply to this message with the results. Good luck!

• BlackBerry Smartphones internet does not connect

  my internet does not connect, I can receive and make calls, but when I go to the WAP, it allows me to type the address but said the lower part in requesting access, loading then once it has loaded its just a screen empty, there are no pictures or anything.

  Help, please.

  Thank you

  1. open your browser > press the Menu key > Options > and find the option to clear the cache of the browser.

  2. perform a simple reboot on the BlackBerry this way: with smart BlackBerry poweredphone, remove the battery for a minute and then reinsert the battery to restart.