It's a silly feeling, 1 phone, 2 monitors.

Similar Questions

• Slow response from phone to monitor data recovery

  hhaving problems with my app Apple Watch (watch OS 2.2) of the iPhone data recovery 6 (iOS 9.3.4). When I click on various watch apps - FaceBook Messenger, Messages, etc., they seem to take forever to recover data. I tried to restart watch it and iPhone without any improvement.

  If I remove the applications from the watch and then reinstall them this solves the problem for a short time.

  Ahy suggestions?

  Hello

  For best performance of your devices, make sure that both Bluetooth and Wi - Fi are enabled on your iPhone (and keep them permanently active).

  Also, make sure that you have installed the latest versions of all applications (on your iPhone: App Store > updates). To install updates for the associated Apple Watch applications also automatically, select automatic App install (on your iPhone, in the application of the watch, go to: Watch My > General > App Install).

  It can help to disable the twinning and re - pair your watch. The app shows on your iPhone takes a backup of your watch automatically when the disparity with the app choose to restore from backup during the whole upward. Most of the data and settings will be restored, with a few exceptions (for example cards Pay Apple, access code):

  • Cancel the twinning of your iPhone - Apple and Apple Watch Support
  • Set up your Apple Watch - Apple Support

  In the future, notes that new arrivals under watch OS 3 - software update that is should be out this fall / Fall - include much faster loading of your favorite applications, including applications to launch immediate up-to-date information.

  More information:

  http://www.Apple.com/Watchos-preview/

• Smartphones from blackBerry Curve 8520 - back from repair - unlocked in the Pocket - forced threaded messaging

  Just another curve to replace my one broken and the operating system has been automatically updated. Here are my big two (of many) questions:

  -Silly - mute button

  I can't help but feel a phone unlocks as you put it in your Pocket is a bad design. Can I please have a way to stop or reassign the button mute? I almost always hit when pushing my phone in the Pocket.

  No, I don't want to put a password, as I would forget it, and no I don't want to pay for a big dopey look awkward case.

  I do not see why I we are not allowed to go back to unlock with star-appeal as previously.

  -Forced threaded Messaging.

  I never liked this option and not only that, but he started crapping already upward, and prevents me from show ALL messages from a person sometimes until I battery restart everything.

  Can I please have a way to go back to the thread of e-mail, to 'normal', or at least "half threaded? I don't like the look of MSN. Pure and simple.

  I HAD the oldest operating system before he fell, but there is no way to reduce the repair one.

  Hi, I recently had this software but I upgraded myself to my netbook, it would be easier and simpler, but I didn't like it. so I went down there myself once again, all you have to do...

  first step, you have the blackberry desktop software on your pc? If so click it and connect your phone to your pc by usb port. When you have done that it should connect you, if you have a password on your mobile phone for example go main menu type that in, otherwise, do not to worry the software you want to get off at is v4.6.1.314 click the device on the upper left corner, options of the device and must say update click that and it will tell the software that you have updated and one you updated since, if you click on the update of v4.6.1.314 that you had before, then press update, it will start automatically making the v4.6.1.314 version, do not take your mobile phone to any process. It could take up to 30 minutes. IV of hope has helped you!

• iPhone 6Plus vibrant question

  My iPhone Plus 6 ceased to vibrate together. I really need this feature, because it lets know me that a call when in my pants pocket. Lately, I missed a lot of important calls because I can not feel the phone vibrate. How much would it cost to replace the vibrator to an Apple Store locally (Miami)? I don't have the Apple Care warranty on this phone.

  Thank you for your attention

  Riotti

  For a 6 over $ 329, a lot. They don't fix them, they replace the phone with a new or refurbished unit. Make sure your phone's settings are correct and the vibrate function is enabled. Expect that an Apple Store will test it for free.

  Repair - iPhone official Apple Support

• Satellite L850-1V0 - module cooling fan runs constantly at the same volume

  I've had this laptop since the middle of February this year. I experienced a few problems I am getting concerned:

  The first is my fan, regardless of how high the percentage of my CPU temperature is that it will always show that the fan works at a speed of 0%, even though I can hear and feel running. A couple of days, it started to go louder for awhile, then «return to normal»

  Second, the fan can be heard at the same volume of work constantly and I can't seem to find a way to make it less work.

  The third problem is bit hard to explain. I am aware that you can feel the phone vibrates because of fan work when you rest your palms on it (for example by typing), sometimes it starts to vibrate more difficult but the fan does not noise, that it should when he is working harder.

  The fourth problem is that I can hear beeps from my region of fan on the right side of the laptop. They are all the same length in time - long. I think that is not the same length so that lies that beeping, but I cannot prove message beeps a beep code message I looked average.

  Problems with the fan began occurring about 9 days after the purchase, it was after I connected my Sony Xperia you to back up the phone. The problem was that it would not back the photos. I was using the pc software that you can install when first connect you your phone via USB. I tried to update my phone once the prgram gave me a message saying wa there is a new update was available for my phone.

  Now surely connect my phone to my laptop wouldn't do go funny. I mentioned that because it is the only odd thing that happened before that happened, funny. Everything was fine before this.

  Also the rotating blue circle near the cursor appears almost all the time when I open programs. Also, when I click on the browser icon in my taskbar tasks it does not open the program instantly, instead the gray/white background appears as its opening then disappears, then the program opens. Overall, some things have been slower in comparison with before I connected the phone.

  Also, being a laptop with 8 gb, I don't think I would have from norton 360 messages saying that I use to record high by some programs. These programs were on my phone before my fan has been upward.

  I stuck with the problems this as much as I use it to revise for my A levels. I'm not sure what I'm supposed to do.

  Help is essential,

  My experience says portable behavior depends very much on its use and configuration of the computer personal laptop is not easy to give good advice. To check first please cooing fan settings. You can change the fan cooling activity in Control Panel > power options > change the power plan > change advanced power settings > Toshiba saving settings > cooling method.

  The change please in optimized battery option. This should reduce the activity of fan cooling.
  Please test and post comments.

  Vibration? Similar problem was my brother on his P300. It is worth noting a few small vibrations but unfortunately there is nothing to do about it. What you can do is to call the Toshiba service in your country, explain the situation and ask if such behaviour is known to them and what we can do about it.

• ENVY of HP dv7 - 7398ca PC Notebook: how much memory (NO RAM) my laptop stand (also, slave drive issues)

  Is there a limit to the size of a SSD or HARD disk, I put in my laptop?

  I currently have a 1 TB SSD, and that's all. He could handle 2 TB? 4 TB? 6 TO?

  There is an empty slot internal hard drive and I'm looking to add a slave drive.

  Y at - it much, if any, of the difference between using a SSD or HARD drive for the slave drive?

  I was under the impression that he was not a limit to the size of a HDD/SSD, you can put in until a year ago, I put a 3 TB HARD drive in a desktop environment and he acknowledged only 2 TB of it.

  Finally, off topic, if someone could indicate what anything else that could / should be upgraded on this laptop, I'd appreciate it.

  If none of these questions are a little silly, feel free to have a little laugh at em.

  Thank you in advance.

  Not stupid at all. Portable hard drives up to 2 TB, not because of any problem with the hardware of the laptop, just hard drive manufacturers do not have more data on a 2.5-inch disk capacity yet. You can install a 2 TB or 2 of them on your laptop. I wouldn't use an SSD as secondary drive 'slave' because you can't start it and the speed is a little lost. Your optimal configuration is the most big budget SSD drive can support in the main Bay, then a mechanical drive of 2 TB in the secondary Bay. You will need a cart and a cable for the secondary Bay and you can buy it here:

  http://www.newmodeus.com/shop/index.php?Main_Page=product_info&cPath=2_5&products_id=498

  If you look at the bottom of the newmodeus.com page, you will see the installation instructions.

  This 2 to/3 TB problem you had on the desktop has been easily solved. The drive must be set up the file system more modern TPG rather than the old system MBR schoool. You will not have this problem with a 2 TB laptop drive, but TPG system is much better than Windows 8 and higher, anyway.

  After the back if you need assistance software migration/relocation.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Camera Sony XA Ultra button problem

  Hey guys I bought a Sony XA ultra today, but I found the button of the camera on the phone does not work. Help me please

  To understand and train yourself to use the two-stage camera button try this: lock your screen by pressing the power button.

  Slightly press the camera button until you feel or hear a click. The screen must remain turned off.

  Now, with the screen still off try completely press the button of the camera. You should feel the phone vibrate and the screen turn on. It's the kind of pressure, you will have to use to trigger the camera button.

• WRT54G issues...

  Hi, I used my WRT54G Router on 2 computers for about 7 months with no problems. A computer running XP is wired and my computer Vista is wireless. The last 2 weeks I had several problems of connection to the router to get internet. I have the signal strength excellent but yet he still has problems to connect, and when it connects to my wireless internet is horribly slow, 56 k speed... Internet on the computer cable is always fast, so it is slower on the wireless connection. I have internet service through comcast cable. I read everywhere in the forum and the linksys Web site and tried everything I found to remedy to this problem, and have yet to be successful. As I've said before that I use this connection for nearly 7 months with no problems, all of a sudden my wireless connection and the connection problems. I doesn't have any setting for the network at this time.

  Can someone help me please?

  Thank you

  Chuck

  There are many causes of bad connections wireless and many solutions:

  First of all, give your network a unique SSID. Do not use "linksys". If you use "linksys", you can try to connect the router to your neighbor. Also set 'SSID Broadcast' to 'active '. This will help your computer to find and lock on the signal from your router.

  Bad wireless connections are often caused by interference from other 2.4 GHz devices. This includes cordless phones, baby monitor wireless, microwave ovens, wireless mice and keyboards, wireless speakers and wireless network from your neighbor. In rare cases, Bluetooth devices can interfere. Even some 5 + GHz phones also use the 2.4 Ghz band. disconnect these devices and see if that solves your problem.

  In your router, try another channel. There are 11 channels in the band of 2.4 GHz channel 1, 6 or 11 generally works better. Discover your neighbors and see what channel they use. Because the channels overlap, try to stay at least + 5 or - 5 channels of your more powerful neighbors. For example, if you have a powerful neighbour on channel 9, try any channel 1 to 4.

  Also, try putting the router about 4 to 6 feet above the ground in an open area. Do not place behind your screen or other computer equipment or speakers. The antenna must be vertical.

  In addition, in the computer, go to your wireless software and go to 'Favorite networks' (sometimes called 'Profiles'). There are probably a few listed networks. Remove any network called "linksys". Also remove any network that you don't recognize or that you no longer use. If your current network is not listed, enter its information (SSID, encryption (if any) and key (if any)). Select your current network and make your network by default, then set it to auto login. You may need to go to 'settings' to do this, or you may need to right click on your network and select 'Properties' or 'settings '.

  If the above does not solve your problem, download and install the latest driver for your wireless card.

  Some users have reported improved wireless performance by opting for WPA encryption.

  If you continue to have problems, try the following:

  For wireless g routers, try setting the "baud rate" at 54 Mbps.

  If you still have problems, download and install the latest firmware for your router. After an update of the firmware, you must reset the default router, and then configure the router again from scratch. If you have saved a router configuration file, DO NOT use it.

  I hope this helps.

• WRT54GS - wireless performance problem

  Dear someone

  I am currently having performance problems with my WRT54GSv1.1

  Just received my new internet connection to 30Mbit. Unfortunately, I am not able to download at that speed. If I connect via one of the linksys router's ethernet ports, I'm a happy person, but using the wireless makes me a little less happy.

  Wireless: 15Mbit/s

  Through the cable: 27Mbit/s

  Network information:

  The distance between the router and the computer laptop 3-4 meters

  Linksys WRT54GSv1.1 - Firmware Version: v4.71.4

  Network wireless - g only mode

  TV - 6 (because all the surrounding neighbor use 10-11, I noticed using Cain Abel & wireless discovered 4.9.29)

  Security: WPA2-Personal (TKIP + AES)

  All other settings are default (just reset to the factory settings).

  Laptop:

  Windows Vista Business SP1 32-bit

  Intel PRO/Wireless 3945ABG (installed the latest drivers from the website of intel, default settings)

  When you check the diagnostic of Intel tools, it tells me the link is 54 megabits and pushes meter packages of 54 megabits, while all lower speeds remain the same.

  More diagnostic information:

  Percent missed beacons: 0

  Percent transmit errors: 18

  Current Tx power: ~ 32 mW (100%)

  Supported power levels: 1.0 mW - 32.0 mW.

  Hope someone can help me here.

  Thanks in advance!

  Kind regards

  Ski Klesman

  Although wireless g "connects" to 54 Mbit/s, the maximum possible wireless "data rate" (in ideal laboratory conditions) is only about 20 to 25 Mbit/s.  Unfortunately, the phrase "in ideal laboratory conditions" generally excludes home intrusion!

  The aerial transmission for wireless connections is higher than for wired connections.   Thus, most individuals find that their Wi - Fi connection works at 50% to 70% of their speed of wired (LAN).  Your wired LAN being 27 Mbps connection speed, your 15 Mbps wireless speed is within normal limits.

  You might be able to tweak a bit more speed from your wireless network by optimizing all your wireless settings.  Here are a few suggestions:

  I guess you want actually to WPA2 encryption.  If so, set to AES only.   When you set the router to TKIP and AES, you actually tell the router to accept a WPA or WPA2 connection.

  Also, give your network a unique SSID. Do not use "linksys". If you use "linksys", you can try to connect the router to your neighbor. Also set 'SSID Broadcast' to 'active '. This will help your computer to find and lock on the signal from your router.

  Bad wireless connections are often caused by interference from other 2.4 GHz devices. This includes cordless phones, baby monitor wireless, microwave ovens, wireless mice and keyboards, wireless speakers and wireless network from your neighbor. In rare cases, Bluetooth devices can interfere. Even some 5 + GHz phones also use the 2.4 Ghz band. disconnect these devices and see if that solves your problem.

  In your router, try another channel. There are 11 channels in the band of 2.4 GHz channel 1, 6 or 11 generally works better. Discover your neighbors and see what channel they use. Because the channels overlap, try to stay at least + 5 or - 5 channels of your more powerful neighbors. For example, if you have a powerful neighbour on channel 9, try any channel 1 to 4.

  Also, try putting the router about 4 to 6 feet above the ground in an open area. Do not place behind your screen or other computer equipment or speakers. The antenna must be vertical.

  In addition, in the computer, go to your wireless software and go to 'Favorite networks' (sometimes called 'Profiles'). There are probably a few listed networks. Remove any network called "linksys". Also remove any network that you don't recognize or that you no longer use. If your current network is not listed, enter its information (SSID, encryption (if any) and key (if any)). Select your current network and make your network by default, then set it to auto login. You may need to go to 'settings' to do this, or you may need to right click on your network and select 'Properties' or 'settings '.

  If you continue to have problems, try the following:

  For wireless g routers, try setting the "baud rate" at 54 Mbps.

  If you still have problems, download and install the latest firmware for your router. After an update of the firmware, you must reset the default router, and then configure the router again from scratch. If you have saved a router configuration file, DO NOT use it.

  I hope this helps.

• Suddenly unable to connect - WRT54G

  I have a Linksys WRT54G Router, connected to a PC.  2nd PC connects fine via a wireless adapter.  1 laptop connects fine.  New laptop connected fine until 4 days ago.  Now it shows the network wireless with full signal, but it is impossible to connect for more than 30 seconds to 3 minutes at a time with long gaps of no connectivity between. I am able to connect to other networks wireless without lag or fall, outside my house.

  I: reset router, set power off and power on modem & router, changed the SSID of default name, turned off firewall and antivirus (back on since nothing has changed), off the MAC and the Security Mode on the router, the drivers updated, restored the laptop to a date before the problem occurred.

  Of ideas and very good hope there is a fix.  Any help is greatly appreciated!

  First of all, the "Broadcast SSID" value "enabled." This will help your computer to find and lock on the signal from your router.

  Bad wireless connections are often caused by interference from other 2.4 GHz devices. This includes cordless phones, baby monitor wireless, microwave ovens, wireless mice and keyboards, wireless speakers and wireless network from your neighbor. In rare cases, Bluetooth devices can interfere. Even some 5 + GHz phones also use the 2.4 Ghz band. disconnect these devices and see if that solves your problem.

  In your router, try another channel. There are 11 channels in the band of 2.4 GHz channel 1, 6 or 11 generally works better. Discover your neighbors and see what channel they use. Because the channels overlap, try to stay at least + 5 or - 5 channels of your more powerful neighbors. For example, if you have a powerful neighbour on channel 9, try any channel 1 to 4.

  Also, try putting the router about 4 to 6 feet above the ground in an open area. Do not place behind your screen or other computer equipment or speakers. The antenna must be vertical.

  In addition, in the computer, go to your wireless software and go to 'Favorite networks' (sometimes called 'Profiles'). There are probably a few listed networks.  (If you have a long list, it could be the only cause of your problem.)  Remove any network called "linksys". Also remove any network that you don't recognize or that you no longer use. If your current network is not listed, enter its information (SSID, encryption (if any) and key (if any)). Select your current network and make your network by default, then set it to auto login. You may need to go to 'settings' to do this, or you may need to right click on your network and select 'Properties' or 'settings '.

  Some users have reported improved wireless performance from WPA encryption.

  If you continue to have problems, try the following:

  For wireless g routers, try setting the "baud rate" at 54 Mbps.

  If you still have problems, download and install the latest firmware for your router. After an update of the firmware, you must reset the default router, and then configure the router again from scratch. If you have saved a router configuration file, DO NOT use it.

  I hope this helps.

• WSB600N problems (string disconects)

  Hello

  After becoming irritated beyond comprehension, I hope someone here can help me lol.

  After installing the drivers for this device on WinVista64 little from the CD, it connects to my older D-link Wireless Rangebooster G network but continualy disconects then reconects, disconects then reconects etc. A wired connection works, but as I want to move this computer more far the router a wired connection is not feasible.  I installed this device on 2 different offices a WinVista64 and the other WinXP32, but face the same problems. Both computers were about 3pi away from the router and had the complete wireless signal strength. My local computer store told me that the Linksys should have no problem connecting to my older network because it is backward compatible a lot like laptops in our House, but was bad?

  I thought that I could just have a defective unit so I went back 1 that I bought for a second, but am experincing the same problem. Any help you can provide will be greatly appretiated.

  If you have the same problem with the second wireless adapter, then I would say that this is not a problem with your wireless adapter...

  There are many causes of bad connections wireless and many solutions:

  First of all, give your network a unique SSID. Do not use "linksys". If you use "linksys", you can try to connect the router to your neighbor. Also set 'SSID Broadcast' to 'active '. This will help your computer to find and lock on the signal from your router.

  Bad wireless connections are often caused by interference from other 2.4 GHz devices. This includes cordless phones, baby monitor wireless, microwave ovens, wireless mice and keyboards, wireless speakers and wireless network from your neighbor. In rare cases, Bluetooth devices can interfere. Even some 5 + GHz phones also use the 2.4 Ghz band. disconnect these devices and see if that solves your problem.

  In your router, try another channel. There are 11 channels in the band of 2.4 GHz channel 1, 6 or 11 generally works better. Discover your neighbors and see what channel they use. Because the channels overlap, try to stay at least + 5 or - 5 channels of your more powerful neighbors. For example, if you have a powerful neighbour on channel 9, try any channel 1 to 4.

  Also, try putting the router about 4 to 6 feet above the ground in an open area. Do not place behind your screen or other computer equipment or speakers. The antenna (if external) must be vertical.

  In addition, in the computer, go to your wireless software and go to 'Favorite networks' (sometimes called 'Profiles'). There are probably a few listed networks. Remove any network called "linksys". Also remove any network that you don't recognize or that you no longer use. If your current network is not listed, enter its information (SSID, encryption (if any) and key (if any)). Select your current network and make your network by default, then set it to auto login. You may need to go to 'settings' to do this, or you may need to right click on your network and select 'Properties' or 'settings '.

  If the above does not solve your problem, download and install the latest driver for your wireless card.

  Wireless performance can be improved by opting for WPA encryption.

  If you continue to have problems, follow these steps: for wireless g routers, try setting the "baud rate" at 54 Mbps.

  If you still have problems, download and install the latest firmware for your router. After an update of the firmware, you must reset the default router, and then configure the router again from scratch. If you have saved a router configuration file, DO NOT use it.

• U2414H randomly turning power on and off

  Hello

  I bought my U2414H (Rev.) A00) in March 2014 and after a few days he began to morph randomly, sometimes for a few hours. Sometimes days would pass without it switched off voltage, but most of the time the screen turns off during the night, while in stand by. I know that it is a common problem with the U2414H and I want to know if Dell has found a solution to this problem other than the monitor. I love the photo of this unit and I would not return, especially knowing that I get a refurbished.

  Thank you!

  I can't speak for the other actions of countries. I know that in the USA, all stock A01 (cut into date 18/03/2014) should be fixed for that matter. You will need to contact Dell Customer Service to your country to organize an exchange of monitor. Provide the following data =.
  E-mail address:
  Name:
  Shipping address:
  Phone number:
  Monitor order number:
  Monitor 20 serial alphanumeric digits:
  Problem: Hardware failure causes a power/Black screen/switching off questions
  Policy: A new scholarship will be issued for users still inside the first 30 days following the date of the invoice. An Exchange used/refurbished will be issued for users outside the first 30 days of the invoice date

• S2340M missing power adapter, Dell Outlet purchase

  I ordered as a monitor Dell of S2340M of Dell taking 8 months fair and recently there was time to connect to my computer. I discovered that the monitor has come only with the supply cable and not the AC adapter. I don't have the original packaging left, but I put in a request for a copy of my delivery, and I still have my order confirmation emails. Is there a way I can get a card replacement, or at the very least, order a new one from Dell?

  bnchn3,

  Your order confirmation emails, you should have the Dell order number. Contact the Support order from Dell for your country. Give the following information to the Dell order support = representative
  Name:
  E-mail address:
  Shipping address:
  Phone number:
  Monitor order number:
  Monitor 20 digits alphanumeric serial number PPID:
  Reason: Making Dell should have include the ac adapter number GXYHH as well as basic P. 5120 I part number power cord got 5120P but NOT GXYHH. Please issue a parts only service to send me the power adapter GXYHH

• u2312hm problem? : ()

  The left side of the rose of the screen?

  Photo: http://i.imgur.com/6lL6zSI.jpg

  nealaka, Will1010,

  As your monitor U2312HM only has a number of command of attached Dell and not a Dell Service tag number, contact Dell customer support in your country. Provide the following data so they can set up a perimeter monitor Exchange =.
  E-mail address:
  Name:
  Shipping address:
  Phone number:
  Monitor order number:
  Monitor 20 digits alphanumeric serial number PPID:
  Reason: Provide links to your photos
  Note: Once outside the first 30 days from the date of the original invoice, the replacement will be a monitor refurbished / pre-owned

• My new S2440L face the problem of power outage

  I have just purchase S2440L to replace my old S2340L. With S2340L, I have never have any problem of power outage but when I plug my new S2440L, it was goes black for a few seconds. The problem was random 10 minutes to 40 minutes. These two monitor was same HDMI cable (and work fine on my SmartTV too), PC same and even graphic card driver. I try to reinstall a fresh driver but still a problem. Is - it could be hardware related? Perhaps S2440L have a hardware problem or a S2440L need a more specific HDMI cable? Now I have any problem with my S2440L. the blackout has been occur when overheating circuit behind the monitor. I was watching about about on the HDMI port of overheating by googling and found that HDMI can fail if the (amplifier HDMI) circuit was overheated (I'm not have overheating issue on my old S2340L (rev.) A00). i sure as S2440L (mine is rev. A01) have material problem on HDMI and circuit surprise (lower part of the monitor) have very high temperatures. I hope you, Dell will be it is your responsibility that your monitor, S2440L have an overheating problem / high temperature and could be a HDMI port blackout curtains. It's bad for me avoid this problem by using the VGA port.

  Thank you, ChozeriZes.

  Christ

  I just touch the border smaller surface compared to the top edge, it is very hot.

  maybe only my S2440L have this problem...

  Today, I remove my VGA card and the power cord, and reinstall the whole again, the problem in black often seem to not like it before summer. It's just a couple of times for that day.

  Actually I feel fine with this monitor, both design and image, but still nervous about high temperature, it's may be the major problem in the long term.

  Maybe I was too early to conclude everything... HDMI is a very sensitive matter, as I said in a previous comment, then I have some tests for my S2440L

  -overclock grid power my VGA card around 2% and delete some fan of my system.

  -find the new place for the power adapter avoid the heat. (I found this use of monitor LG IPS 1. 3a adapter 19V is perhaps)

  Note: I use 750W Seasonic and power supply of 5V and 12V is pretty good (5.1V and 12.05V).

  OK, now I need to close this thread as solved and and report this problem like power supply problem; in major relate.

  "on monitor blackout curtains when use the HDMI port occurs when power on unstable system will also be able to rack in the House, heat and cable must use HDMI1.4 full spec for sure (if HDMI cable does not include with the package).

  Best regards

  ChozeriZes