It would fit?

Similar Questions

• This keyboard would fit?

  Hello

  Some keys do not work or press several keys, so I thought I would buy a new keyboard. The laptop I have is HP pavilion 2154sd G6. is the keyboard, I found and I would like to know if it fits: http://m.aliexpress.com/item/1716656627.html

  Thanks in advance!

  In addition, the first 15 minutes after the start of my laptop my fan makes some unusual noises, ideas?

  There is a plastic frame around the keyboard that holds it in. You have one on your laptop and can reuse just this one. Yes, assuming that your language is Dutch this should work fine for you.

  If it's 'the Answer' please click on 'Accept as Solution' tp help others find it.

• HP 700-414: what case fan coolers and CPU would fit into a 700 HP - 414

  I installed a GTX 950 in my HP 700-414 played overwatch for maybe 3 or 4 hours max and my time cpu has reached 85 - 87 c and my gpu is between 80-85 C. So I was wondering if you guys know how I could find the size of the case fan and how many mounts for fans are available? Because I can't find anything on it I searched and searched. And do you think I could adapt a CPU cooler to spare in this case?

  Hello92, welcome to the forum.

  The time of your video card do not seem to be too bad.  The absolute maximum for the GTX 950 is 95 C.  Ideally, you do not want to keep at least 10 to 15 C lower than that which is yours according to your figures.  Your time CPU however are much too hot for me.  When OC I am very cautious and want to see time about 50 C.

  You may need to get a little inventive when it comes to add case fans.  It's always a balance.  You can actually get fans to work against the other.  In other words, a fan air may cause another do not work effectively.  Trial and error is the best way to go.  When the fans run correctly, you will see an increase in cooling.  In addition, it probably not places to mount fans.  This can be overcome by using velcro or other means.  There's not enough connectors, so you will need to use adapters.

  After walking coolers are normally very large.  You will need to measure carefully to make sure that the cooler you choose to insert in the case.  I have recommended a Cooler Master Hyper 212 EVO to a member and it was too big.  Cooler Master makes some very good, but you must find one that will fit in your case.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• Corsair CX500 p4 connector HP Pavilion Elite HPE - 410 t. I was told it would fit and the 24

  I was told of the Corsair would correspond and the 24pin connector has no problem, right.  However, the motherboard using a P4 PSU OEM plug that is not on the privateer.  The P4 is square, 2 more 2 connectors. Card PCI-E and one 8 pins without name, but not P4.

  I bought an Asus HD6670 to meet my need for 3 monitor, but I really don't want to rebuild this computer from the MB on the spot.

  Henry

  Hi Henry,.

  Corsair POWER supply should explain that the ATX P8 connector can be split.  See this video of Corsair.

  I shared the ATX P8 connector when I installed a Corsair POWER supply in my HP e9280t.

• 23 "monitor a 3-1/2" black band on the left side of the desktop background. In other words, the bottom would fit on a 19 "monitor. How to expand the context in which to adjust Monitor?

  23 "monitor a 3-1/2" black band on the left side of the desktop background. How to expand the context in which to adjust Monitor?

  It's the monitor that is provided with the DELL Expirion computer when it was purchased in July 2012.  I paid a "technician" (certified) to transfer the info from my old computer.

  If its a LCD monitor, you PC resolution to the native resolution of the screens?

  Some monitors have a button self-configured, try pressing that. It can help if there is one.

  At the same time, in your 19 "" are you the full desktop or is it lacks a little? If so, try to change the settings for horizontal and vertical screen on the monitor to move the image.

  Sorry if this is how to navigate, it's hard to describe.

  
  

  More info of calibration here - http://windows.microsoft.com/en-AU/windows7/Getting-the-best-display-on-your-monitor
  

  Also, some graphics card drivers were themselves built the calibration setting, which may be worth a visit, but this can vary from machine to machine and cards.

• HP Pavilion 256na-550 desktop: would a RMi Series™ RM850i - 850 Watt to adapt in a HP Pavilion 256na-550 desktop?

  Hello!

  I was just wondering if the RMi Series™ RM850i - 850 watts 80 PLUS® Gold Certified fully modular PSU (UK plug) would be able to adapt to a desktop HP Pavilion 256na-550?

  If this isn't the case, then can someone recommend me a powerful diet that would fit in it.

  Thank you

  Greetings,

  Compare the measurements on the 850 to your current diet.

  I just installed a Corsair RM650x in a 810-150se desire.

  A Rm750x was too long. It would fit but you couldn't get to modular to the power supply cable connections as the optical drive was too much.

  A 600 Watt power supply 650 watt should provide more than enough power to run everything you plan to add to the system.

  Only, you can check this by checking all the measures. You may have a problem with installation of a 650 watt PSU.

  See you soon!

• ENVY Desktop - 750-137c: help me to find a graphics card that fits.

  Hello, my name is Joe.   I need help with my new pc.  I got this pc without graphics card.  I want to try to upgrade and I think I can use the slot pcie 16 x 3.0?  Correct me if I'm wrong.  I want to know what the card would fit as the motherboard is a Μatx which, from what I can tell, a little smaller.   Also, I may have to upgrade my power supply. If so, is there a special for my pc or can put in none?  I have no idea.   Thank you all for your time.   I'll check here every day.

  Joe

  Thank you for the additional information.

  You certainly need to move the power supply (PSU).  I love Corsair products.  A modular POWER supply is very good because it allows to use only the cables needed.  I normally recommend at least 500W, but in this case, I would recommend 600W.  Your computer is new, and this will give you more flexibility for future updates.

  Here are the system requirements for Fallout 4:

  • 08/07/10 (64 - bit OS required) Windows
  • Intel Core i7 4790 3.6 GHz/AMD FX-9590 4.7 GHz or equivalent.
  • 8 GB OF RAM.
  • 30 GB of free HARD disk space.
  • NVIDIA GTX 780 3 GB/AMD Radeon R9 290 X 4 GB or equivalent.

  Now for the video card.  As you can see, the system requirements are quite high for Fallout 4.  I believe, with the video card on the right, you'll be able to play it is still higher than the average.  The RAM and video card are more important when the games.  Here is a card that should work for you.  Read the customer reviews.  A comment indicates that the map plays Fallout 4 nicely.  However, I claim that you contact EVGA Tech Support (1-800-880-3842) in order to ensure that it will work.  They were always very helpful when I made contact with them.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• the case of the iphone 5 fit the new ipod touch 6?

  I boughta new ipod touch 6 and there are not a lot of stores where I can find a case for it, I was wondering if I would be able to buy a case for iphone5/5 s and if it would fit the new ipod touch 6.

  No, the iPhone is thicker.  However a case for the iPod 5 if integrate perfectly except that there will be a hole in the back for a strap, not a big deal.

• A 760 GTX video card will fit in a Hp Pavilion p7-1534

  Hi all

  I was wondering if a GTX 760 video card fit in a Hp Pavilion p7-1534, if I upgrade the power of 750w? Thank you!

  Ardin, welcome to the forum.

  I have gone through two different brands of GTX 760.  One of them, ASUS, was 8.6 "in length.  The other, EVGA, was 9.5 "in length.  I suggest to take a piece of cardboard and make a template of the EVGA to see if it would fit.  It does not list an additional power connector, but I would like to add 1 "in length.  Personally, I like the cards XFX, EVGA, Sapphire and PNY in that order.

  You can easily get with a 600W at 650W power supply.  I love OCZ and Corsair.  They are passionate about quality with reasonalbe price.

  Please click on "BRAVO", if I helped you and click on "Accept as Solution" If your problem is resolved.

• Presario CQ57: I would like to change my intel pentium processor by an another core i5, it is possible

  Hello
  I have a Compaq Presario CQ57 Notebook PC with Intel Pentium CPU B950 @ 2.10 and 4 GB of RAM for 32-bit x 64 operating system, I find on the internet another processor Intel Core (TM) i5 - 2430 M 3 M, up to 3.00 GHz, I want to know if I can buy this for my Compaq Presario CQ57 I5? If so, it can work well?

  Sorry no.

  Here is the Manual:

  Manual

  See Page 19. Intel Core (for example an i5) and Intel Pentium (you have now) processors use a different motherboard. So if you bought the i5 he would fit into the socket but the laptop would not PUBLISH.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Ink cartridge does not fit!

  This is the first time that I replace ink for my printer Photosmart Premium model #C410a.  Went to Staples and got 2 different cartridges on 2 different trips.  I replace the cartridge 564 is regular black ink, NOT black photo.  The cartridge is very thin.  First of all, I bought the regular black 564 and it was too big to fit in the space provided (the only place that would fit that size is the photo in the black).  So, I went back and got the 564XL. I was assured that he would do. Once again, too much fat.  So I went to the hp official shopping site to try to order through them. They didn't even have my model listed as a choice in the drop-down list to decide what ink I would buy.  The only numbers listed were: C4140, C4150 and C4180.  What is a girl to do? I'm so confused, and I need to print!

  Holy moly! I am amazed...  I completely messed up.  I'm generally pretty well about these things and I didn't know what cart. was that, when I installed them. I know now that I'm not crazy, just stupid. It is always nice to be exposed on a public forum. My brain was fried lately--the proof is here.  You are a life saver, thank you very much.  I can finally print once again!  You just saved my Christmas happy holidays!

• What size, type and brand of SSHD fits and works well in the caddy in E6410?

  Hello

  I just got my laptop E6410 a caddy, who works with SATA drives. As I wish to expand my storage saying up to 1 TB with the caddy, I don't know what type, size, brand of SSHD 1 TB would fit into the caddy and work well in my laptop E6410?

  Suggestions are really appreciated.

  Concerning

  Endre

  It probably uses a 2.5 drive "-check with the provider of caddy."  It will certainly require a drive of 7 mm and can take a 9.5 mm as well.

  There are three manufacturers of drives - WD (HGST), Seagate (Samsung) and Toshiba.  They will all work.

• iPhone screen size 7...

  IM gunna be preordered an iPhone 7 and I was wondering if anyone knew if the screen size is identical to the iPhone 6, as a screen for a 6 and save money protecter I wanted to know if it would fit the 7? Anyone know?

  Both are diagonal 4.7 "screens.  Both are the same height and width.

  https://www.Apple.com/iPhone/compare/

  iPhone 6 - technical specifications

• Restoration of Apple TV cable... Help

  Restoration of Apple TV I ordered a USB - cable C... when he came an end DID in Apple TV, but the other end was NOT a normal USB connector that would fit in my MacBook Pro... He had a connector like what is happening in my iPhone... Help?

  You ordered the wrong cable. It takes you to 4 ATV, is a C - data USB - A USB cable. Make sure that it is not just a charging cable.

• Watch a video via iPhone 6s

  Apple community

  I have a Yamaha RXV1800 receiver that is connected to a Yamaha YDS - 11; which is a support to ipod (Classic) that allows me to push the video output from my ipod through my receiver to our flatscreen TV.  Because the RX is rather expensive to replace I want to first of all make sure that I am taking full advantage of its capabilities.  I have a new iPhone 6 s, and I think I can't push the video stream of the iPhone using a relief from Apple to Apple 32 pins (that would fit into my booth YDS-11).  But I read where Apple has a Lightening to female HDMI cable.   If I buy the said cable and an HDMI cable male to male-good could I push video to my Yamaha receiver via its HDMI ports?  And if so the iPhone will change in this configuration.  Other options I could look in.  The technology is awesome but is expensive keep snuff.  I wish apple would have resumed some of his form of technology the iPod option in the iPhone and the iPad too, oh well, that's what it is. -Jeff

  You have reason your hypothesis using a lightning to 30 pins going to give you no video output. Connectors in question supports the analog audio output, USB audio, as well as the sync and charge. Regarding the connection of your iPhone 6s to a receiver via HDMI, I'm not entirely sure that this feature is supported. Lightning Digital AV adapter is specially designed to support the mirror screen through projectors, televisions and other indicators that support an HDMI input.

  Unless you have a specific need to depend on your receiver, I advise you to buy an Apple TV. The best option would be the 4th generation Apple TV with remote Siri, who sells now for $149.99 for the 32 GB model. Not only Apple TV fantastic offer streaming like Hulu, Netflix and Apple own iTunes content options, but the Apple TV also supports screen mirrored devices iOS by the Airplay Protocol, which would allow you to your iPhone 6s videos to your TV.

  If the 4th generation Apple TV is outside of your price range, then you can buy the 3rd generation Apple TV. Although the 3rd generation Apple TV has no remote Siri, it still supports an abundance of content streamed so that allows mirroring Airplay. The 3rd generation Apple TV is a great value at $69.99, or only $20 more than the Digital AV adapter of lightning for a more robust feature.

  Good luck to you