Iterator ObservableList fail-safe or fail-fast?

Similar Questions

• Failing fast date

  Hi all
  I have a calendar field which includes the field every Friday date 2000 what I do is that I need default my guest dashboard in a way that after what it should show day of the week underway Friday and the previous week Friday day and every Friday again that the guest should report to the new date of Friday and the week previous Friday day.
  Ex: guest of the current week should look like this
  06/05/2011
  29/04/2011
  
  next Friday, he must pick up
  13/05/2011
  06/05/2011
  
  As above, it should work can you guys help out me.
  Thank you
  
  Published by: Copter on May 6, 2011 08:01

  (I give you another chance, Copter.) Here's how to get the date in your guests by default:

  (1) create a command prompt of dashboard based on a date column. In the 'Default' window, select "SQL results" and enter the following command:

  SELECT CASE WHEN 1 = 0 THEN 'your date column' ELSE TIMESTAMPADD (SQL_TSI_DAY, 6, TIMESTAMPADD (SQL_TSI_DAY, DAYOFWEEK (CURRENT_DATE) *-1, CURRENT_DATE)) END OF "your subject area.

  This will give you today 06/05/2011. Friday next week, it will give you 13/05/2011.

  (2) create another column in your prompt with a date column and enter:

  SELECT CASE WHEN 1 = 0 THEN 'your date column' ELSE TIMESTAMPADD (SQL_TSI_DAY-1, TIMESTAMPADD (SQL_TSI_DAY, DAYOFWEEK (CURRENT_DATE) *-1, CURRENT_DATE)) END OF "your domain".

  This will give you today 29/04/2011. Friday next week, it will give you 06/05/2011.

• system crashes every 2 seconds

  Hello people!

  I have a laptop G62 with the 64 bit version of windows 7, I have almost 4 years

  About 3 days ago, I ran a few youtube videos, the system started to freeze (video + sound) every 2 seconds!

  I turned it off and went to bed, the next morning, I turned it, went to the home page! and he showed me the desktop but nothing opens, not applications without the browser, when I opened the Task Manager, it showed the programs that I clicked with a * 32 at the end!

  in about 5 min later explorer.exe crashes and I had to stop it.

  what I tried:

  memory test: test the HARD disc, freezes in almost 50%

  factory reset: the partition is not found

  Scan of the system with antivirus: freezes in the Middle!

  software to clean registry
  
  logged in to windows, normal start, after 6-8 minutes it starts to freez every 2 seconds, and every two seconds, I hear a noise in the HARD disk like crack! and it happens every 2 seconds
  
  my activities:
  performance of Flight simulator X
  turn 3d flash games
  movies and videos youtube

  system:

  Intel Core i3 2.40 GHZ (4CPUs)
  Home Edition of Windows 7 64 bit
  
  Note: I have been using safe mode with network for over 2 weeks now, is not freez in this mode!
  I do not have the CD repaired

  Sounds like the hard drive is failing fast and will need to be replaced. If you are still in warranty HP will send a replacement. If this is not the case, a laptop SATA hard detail can be used. Just be sure to get one of at least equal quality of the original in order to use recovery disks to install Windows & programs. It may be big, but not small ability more. For example if you have a 500 GB hard drive you can use a 750 GB hard drive, but not a 320 GB hard drive.

• Satellite Pro M30 - menu Windows cannot start

  Hello

  I have a problem where I can't start something on my computer.
  I seem to have two operating systems that come up at startup fistly

  When I turn on the computer it freezes for centuries, then says failed 0203 IDE #2 I think it's because as my hard drive broke and I replaced it then I get two options
  go to the BIOS or boot menu.

  If I boot and I start an another two options either a bad install of windows xp pro, or a bad installation of Windows XP
  no work, I can't get into all the bios settings by using the command mode without fail fast or any of these options and it seems to work when I try boot discs to erase the hard drive or the bios boot disks.

  I'm almost was to buy a new hardrive that this would maybe cheaper to fix, any help? I no im a beginner but I will be back for all solutions,.

  Thanks in advance.

  Hello

  0203 IDE #2 error is displayed because the device connected to the second IDE controller is not recognized by the BIOS.
  This means that there is something wrong with the IDE controller or the connected device.
  In most cases it s a CD/DVD drive which is broken.

  In this case, the replacement is necessary, but you must use the STRANGE fully compatible!
  Not all CD/DVD drives are supported due to different master/slave/c-salt settings.

  Now you say that you are not able to access the BIOS
  Have you tried the right key? Press F2 during switching on laptop.
  This should help.

  But if you are still not able to access the BIOS, then that means that your motherboard is affected
  The motherboard is one of the parts expensive laptop the laptop seems to be a good old classic in my opinion it s not worth to replace.

• Envy of HP dv7t quad laptop: laptop does not start

  My laptop does not start I get the message.

  Computer does not start. "A required device is not connected or is not accessible.

  Error code: 0xc0000185

  Using diagnostic tools, I get these results:

  Quick check memory: failed

  Hard drive short DST CONTROL: WARNING

  I am "spent" for the rest of the diagnostic checks.

  Thank you

  khosrowbp

  Your hard drive is failing, fast (these things last forever). You need to replace as soon as POSSIBLE. If you have important data on what cannot be replaced I suggest you plug it into another computer as an external drive and pulling all the data you need it off.

  If you do not have the possibility to connect the drive directly on another PC, you can download a live Linux CD/USB.

  Step 1: Acquire a blank CD or USB. If you use a USB port, format it in FAT32.

  Step 2: Insert your chosen in your PC Backup media.

  Step 3: Download Unetbootin.

  Step 4: Select a distribution in the drop-down list. Just about anything will work, but for your application, I would recommend "Puppy Linux".

  Step 5: Select your media.

  Step 6: Once Unetbootin is complete, insert your media in the PC is installed on the corrupted hard drive.

  Step 7: Boot puppy. (You may need to select your Flash DRIVE or a CD in your BIOS)

  Step 8: The use of the included file manager, mount the hard drive and browse for the files you need. You can then save these on another DRIVE or a CD drive, or the internet.

• QuickTest/PrimaryHardDiskSelfTest is executing/94%Complete/#1008-ReplaceHardDisk1rent test item

  I would like to know, in other words, what it means.

  Your hard drive has failed or is failing fast - die in other words. You can buy a new hard drive to replace it. You can use any retail SATA mobile hard drive. Just be sure to get one with less as great a capacity than the original to use recovery disks to reinstall Windows. It may be bigger but not smaller. For example if you have a > 320 hdd not to buy a 250 GB.

• failure Id: uc2bsm-5l571a-xd014j - 60 c 103

  I have a failure id uc2bsm-5l571a-xd014j - 60 c 103 on product QB408PA #ACJ id, it has failed every test disc HARD 1

  DST means the hard drive is failing fast or didn't completely and must be replaced. Back up all important files as soon as possible to the external source DVD or USB hard drive if you are still able to start Windows.

  If you are still under warranty HP will send a replacement hard drive - if not you can replace it with a portable hard drive SATA Retail. Just be sure to get one with a capacity of at least as large as the original 640GB hdd. It can be larger, such as 750 GB, but not smaller in order to use recovery disks.

  You will also need the recovery disc to install Windows and the software/drivers. Hope you did your game? If this is not the case, they can be ordered from HP for a small fee.

  If you need assistance in the selection of a new hard drive or replace the post back. Your interview Guide & will help to remove the failed hard drive.

  http://h10025.www1.HP.com/ewfrf/wc/manualCategory?cc=us&DLC=en&docName=c02851504&lang=en&LC=en&product=5118188&query=QB408PA&tool=&

• Administrator password problem

  I have a HP Pavilion dv7 laptop running Windows 7.  I have problems with it starting and leaving me with a black screen with just my cursor showing.  I can't do anything with it.  I could get the command prompts at the start to where it gives me the opportunity to leave the computer to repair itself. However: when I click on it, it forces me to submit my local/admisnistrator username and password before it will enter the phase of repair.  I never put the password that I remember and we tried on every password that I can remember never use without result.  This is the first part...

  I was able to get a screen that asks me to a self diagnostic run on the test at startup computer.  The result is:

  Memory test: past

  Smart Check: spent

  DST short: failure failure ID: RU63NO - 58H & 4 s - XD002J - 60XR03 product ID: WA794UA #ABA

  Can someone help me with this problem.  I don't know what to do, and can't afford to take it to a computer specialist.

  Thank you

  Jack

  DST failed message indicates the hard disk has failed or is failing fast and must be replaced. If you are still in warranty HP will send a replacement. If this is not the case, a laptop SATA hard detail can be used. Just be sure to get a quality at least equal the original in order to use recovery disks. It may be big, but not small ability more. For example, you have a HDD 500 GB so that you could use a 750 GB hard drive, but not a 320 GB hard drive.

• Aster Disk:S.M.A.R.T PRI hard status BAD, Backup and Replace

  My dear, please help me
  When I start my computer the msg show on screen
  Aster Disk:S.M.A.R.T PRI hard status BAD, Backup and Replace

  Press F2 to RESUME

  [transferred from viruses and malware to the Windows/Hardware forum space]

  This indicates that your hard drive is bad or is going to fail fast.  There is nothing regarding viruses or malicious software.  See this link:

  http://www.computerhope.com/issues/ch000184.htm

• Has no short DST

  The battery on my HP Pavillion G Series (running Windows 7), came out, so I ordered a new. I put the battery and opened to display a screen that tells me to choose either to 'Start repair' or 'Start Windows normally'. Whatever it is, the screen freezes. I it turned off and rebooted, then to press F2 and made the starting Test. Here are the results:

  Memory test: PAST

  INTELLIGENT control: PAST

  DST short: FAILURE

  Error code: U0C7UC-6GC785-MFPX1G-60V603

  Product ID: A7A47UA #ABA

  Hard drive 1

  Starting test: FAILED

  Press Escape (ESC) to return to the main menu or click on the button below.

  For more information, please visit: www.hp.com/go/techcenter/startup

  I use this computer for work and would like for my files for my job to stay intact if possible. Please help ASAP

  Sounds like the hard drive has failed or is failing fast and will need to be replaced. If you are still in warranty HP will send a replacement. If this is not the case, a laptop SATA hard detail can be used. Just be sure to get a quality at least equal the original in order to use recovery disks. It may be big, but not small ability more. For example if you have a 500 GB hard drive you can use a 750 GB hard drive, but not a 320 GB hard drive.

• Error 0xc000000f startup

  Hello. My presario primer not. I ran the self test and get "start up test" Failed "fast hard disk 1" (303). I tried to restore to the factory settings, but get error 0xc000000f and it will not go further. What is the best way to precede.

  Hello

  303 error code would indicate that hard is defective and must be replaced.  This is also consistent with the question of commissioning and the inability to fill a factory reset.

  If your laptop is still under warranty, contact HP and arrange for the disk replaced - you can check the status of your warranty here.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  If you are out of warranty and would like a guide to replacing the hard drive yourself, please let me know - include the full model number and the laptop Nr - see here for an explanation.

  Kind regards

  DP - K

• Xperia Z2 driver installs.

  I have reciently updated upgraded to Z2 phone, my iphone 4 has been stolen.  My problem is that my phone does not connect to my pc.

  I tried a pc to the phone store and it connects, so I know this isn't the phone.  I have as well as what I've said is drivers for the phone in a downloaded file companion pc on my computer.  I extracte pilots in the same file, but when I search files via the computer driver update cannot find it even if I'm in the right folder.  I searched on the net for the drivers via update driver, computer starts the installation, and then tells me it fails. S1 pilot fails (fast start) D4305 fails (it is a different name for the phone do not know if I understood numbers in this post, but I'm close.) I tried to restart the system, unpluging all usb devices, turning off win firewall and antivirus.  I don't know what is blocking the installation of phone drivers.  I'm sure that if I can get the driver on my computer, I get companion pc to see my phone.  I connect my null, which I guess is my phone, but when I open pc companion it is not connected, probably due to drivers. Tried connecting with the phone's market, turn on with the volume key pressed, debugging with the developer still can't find thi question.

  Well I don't know what fixed the problem, but I have turned off my wifi on my phone and turned off my bluetooth on my phone and tried to connect to my pc. Finally a message came on my phone sking me to install the software on my pc from my phone, I have typed on ok he did his thing and now my PC can now see my xperia. Guess that my phone was not ready for stampeed, then much will be different.  If you have the same problems as me look at what I had to do in my messages so posted what I did, well good luck to all and thank you to all who helped.

• faliure id on laptop

  not sure if this is good advice, but here goes. I have a Pavilion g6 notebook that has had changes made to the system as a replacement for the Norton antivirus to another with a few other spyware and malware .the windows media player has been replaced by another media player of unknown origin. everything is fine for a day until yesterday when nothing would load up on the screen apart from what looks like a screensaver of choice you get when you first install, but this is as far as I can get to work far enter too far into the system goes. I managed to get what seems to be a diognostic page. Solange performing an analysis of hard drive what happens with this message. "failure id: 94le1s-5s071f-mfpv4k - 619 k 03", does this mean?, and it is able to fix?   Thank you.

  Hard drive has failed or is failing fast and will need to be replaced. If you are still in warranty HP sent a new. If this isn't the case, you can use a laptop SATA hard detail. You also need a recovery media to install your operating system and the drivers/software on the new hard drive. I hope you did yours? If this isn't the case, it can be ordered from HP for a small fee usually.

• Failure of DST optimized start-up

  My laptop hangs at startup.  I did the Test of system & comes with DST OPTIMIZED: failure

  This means - my hard drive is defective or has bad sectors?

  DST error indicates that the hard disk has failed or is failing fast. You can replace it with a retail hard drive if you are out of warranty. Just be sure to replace it with one at least as large a capacity than the original to use recovery disks for installing Windows on it. It may be bigger, but not smaller. For example if you have a hard drive of 320, now, you could use a 500 GB but not a hard drive of 250 GB.

  If you need help please post full model number or product number of the computer laptop-as indicated on the Service tag on the bottom of the laptop.

• FF takes longer than Chrome to begin

  I have been using ff for 2 years. I noticed that when comparing chrome one ff, FF takes a long time to start.
  I used these plug-ins:

        Adobe Acrobate 10.1.9.22
        Java deployment Toolkit 7.0.650.20 10.65.2.20
        Java(TM) Platform SE 7 U65  10.65.2.20
        Shokewave Flash 13.0.0.214
        Silveright Plug-In 5.1.30214.0
        VLC Web Plug-in 2.1.3.0
        VLC Web Plugin 2.0.6.0
        Picasa 3.0.0.0(Disabled)
  and Themes:
         FT Deep Dark 10.3.8   (using now)
         3D Digital Blue Dlow
         Default 30.0
         LavaFox V2-Green 2.2.6
         Metal Lion Austrails Theme 2.0.1.4.91
         Simple White 2.1.4
  

  enrichment:

         AdBlock Plus 2.6.3
         avast!Online Security 8.0.1506
         Download Status bar 10.1.0
         Youtube ALL HTML5 2.1.3
         Lightbeam 1.0.10.1    (disabled)
  

  Windows is Windows 7 64-bit, RAM DDR3 2 GB.

  To remove VLC, type about: plugins in your address bar, scroll down until you see the VLC plugin and delete the dll file pointed by ' path:'.

  It can also help to disable hardware acceleration, as pointed out by multiple users.

  To disable hardware acceleration follow the instructions in the post following disable hardware acceleration.

  I noticed Firefox slower than Google Chrome spear as well.

  It's good to hear that Firefox is faster in safe mode.
  Safe mode is faster because it turns off a lot of different modules, plugins and other things.

  Maybe have a look at the plugins as well in the plug-ins section and disable those you don't use often.

  You don't have to remove completely the plug-ins, but you can disable them also teporarily. In the menu dropdown.

  To completely remove a plug-in you can uninstall the software that comes with it. To do this take a look at this article: remove the Plug-ins.

  I don't expect Firefox to become as fast as Chrome, but following the steps above, I think that Firefox can speed up considerably.