Its dynadock is all static

Similar Questions

• Anyone know if where I can download the keyboard screen on again once... my normal keyboard broke, and some how I enlarged it on screen one and cant end settings or information to do little new... its takng upward all over my screen :(

  Anyone know if where I can download the keyboard screen on again once... my normal keyboard broke, and some how I enlarged it on screen one and cant end settings or information to do little new... its takng upward all over my screen :(

  Try this:

  Ctrl + alt + delete > bottom left on the Page, click, accessibility > uncheck, magnifying glass, keyboard

  HTH

  If I brought you joy, vote! If I answered your question, click, propose as answer! > WT

• its acceleration on all systems

  I went int all my drivers. Windows Media, realtek, etc. and found no indication of problems... The sound is like a device Robotics which is longer than acute normal - speech music and in particular

  I guess that there is no one to help...

  ==========================
  No guarantee... but something to try:

  If you have "Realtek HD Sound Effect Manager'"
  Reach... Its tab effect and karaoke to 0 / OK

  The following articles might offer something useful:

  Using the sound effect Manager
  http://h10025.www1.HP.com/ewfrf/wc/document?LC=en&DLC=en&cc=us&DocName=c00377375

  The card Realtek HD Audio Driver user manual
  http://UK.TS.Fujitsu.com/RL/servicesupport/TechSupport/boards/soundcards/RealTekHDA/hd_audio_driver_usermanualver1-00_0418-05 [1] .pdf
  (See 1.4 karaoke Mode)

  Good luck. John Inzer - MS - MVP - digital media experience

• Is it possible to keep all static?   (vs dynamic SQL)?

  Hi all
  
  I have existing MS who after db Exchange should work with newly partitioned table partition name = date of entry both inside AND date_param, something like:
  
  sql_string: =' select * tt partition (P_'| date_param |') the problem of configuration required, I can't use any dynamic SQL and it really put me in the corner, do you think it is at all possible? I was thinking about a lot of things that may work, but date_param is just date < 12 - 7.-10. > and partition is preceded with PRT_?
  
  I can to with str_part: = ('(P_'|| date_param ||'') ') "), but it is already dynamic...
  
  Even after I create the temporary table and for sure, I know that the DDL inside the procedure should be ONLY dynamic?
  What is the dead end? There is a way to CREATE static? or simply to use kind of temp table created outside MS and clean it before use? or...
  
  I actually try to see why customer site cannot manage NDS or they just don't want it, but can't argue with that for now.
  I've got enough new to Oracle and couldn't do bad things on the SQL dynamic (NDS)?
  
  Thank you all
  TR

  Trento wrote:
  Hi all

  I have existing MS who after db Exchange should work with newly partitioned table partition name = date of entry both inside AND date_param, something like:

  sql_string: =' select * tt partition (P_'| date_param |') the problem of configuration required, I can't use any dynamic SQL and it really put me in the corner, do you think it is at all possible? I was thinking about a lot of things that may work, but date_param is just <12-Sep-10>and partition is preceded with PRT_?

  I can to with tmp_part: = ('(PRT_'|| date_param ||'') ') "), but it is already dynamic...

  Even after I create the temporary table and for sure, I know that the DDL inside the procedure should be ONLY dynamic?
  What is the dead end? There is a way to CREATE static?

  I actually try to see why customer site cannot manage NDS or they do not want, cannot buy with that for now. I'm pretty new to Oracle and could not do bad things on dynamic SQL?

  Thank you all
  TR

  Why the hell wouldn't you just query the table and apply the predicate? Oracle would then partition elimination for you.

  No need for anything either dynamics based on what you posted.

• A project that I created is no longer works.  All video clips .mpg who ask to be reimported, and when I try to import from its original folder, all the files are slim.

  I currently have iMovie 10.1.2 and OS 10.11.6.  All except a video clip in a compilation of long hours are black with an exclamation mark.  They have the error statement, that the file is missing, re-import the original source media.  The clips are all .mpg and had imported fine when I created the film project of the month of May.  When I try to use the function "Import Media" drop, and I go in the folder on the desktop files located in, all the original .mpg files are low.  The two pictures that were in the project appear on the lower part.  Oh, and I did all that stored on the cloud.  I also wanted to start a new project, part II, but all the source files show a similar dim for all .mpg files.  Apple decided not to allow the .mpg files in iMovie?  If so, what is my next step?

  iMovie accepts more mpg files. The easiest way to work with them is in the finder do a right-click on the mpg file and select "encode the selected video files. In the dialog box that appears, choose the desired conversion. The converted file appears in the import iMovie window, and you can import it.

• I have no idea how to release that much space because its system of all files and stuff like that which I know nothing. But on DATA(D:)) I'm free to Go 434 336 GB. How to install Windows 10?

  Hello

  I have Windows 7 64 bit laptop. The installer of Windows 10 says there need 8 GB of free space to install it but I don't even have 1 GB (335 MB of free space to 30.7 GB) on the disk C DATA(C:) et je n'ai aucune idée comment libérer que beaucoup d'espace là parce que son système de tous les fichiers et trucs comme ça qui je n'en sais rien.) But on DATA(D:)) I'm free to Go 434 336 GB. What should I do? How to install Windows 10?

  This free tool can help

  http://www.partitionwizard.com/free-partition-manager.html

• BlackBerry Smartphones ringtone incoming and its sound call all get silent automatically

  Dear BB support,

  I have new mobile Blackberry

  Details in the following way:

  BlackBerry 9900

  Smartphone (3G, WiFi)

  7.0 bundle 1465 (v7.0.0.296, platform 5.0.0.496)

  Band 3G 1,2,5,6

  Help of the kernel v3.8.7.0

  Brand version: 1.0.88305z

  The question that I get is often mobile becomes silent automatically no ringtone sounds , when I get an incoming call arrives only display, when I receive call I can't hear anything. SO every time I have to turn off mobile and remove the battery and restart the phone again, for a while everything works fine, but after a few hours, yet once shut up.

  awaiting your response

  akbar_baig wrote:

  SO every time I have to turn off mobile and remove the battery and restart the phone again

  awaiting your response

  Remove your battery while your phone is off will do nothing to help.  You must ensure that your phone is always on when you remove your battery.

  (And while you're here, please remove your e-mail address of your post.  Personal information, such as e-mail addresses, are not allowed in messages.)

  I hope that helps you.

• YouTube and audio DailyShow is static electricity on all browsers but msnbc video and audio is good.

  System sounds and files mp3 audio are good.  But, the wma and flv files are all static with

  Windows Media Player. Can I download a youtube video and play with VLC
  Drive. All other media players I've tried is all static.  I think I understand
  VLC Player has its own audio codecs.
  Here's the story: machine to my Windows XP Pro and its edge

  (Realtek) worked for two years, then began to get some static.

  and then, died. All audio was static city all the sounds of the computer.

  Installed SP3 to get all of the updates and run diagnostics

  could not detect any problems. Then, installed a Rocketfish 5.1

  his computer back box and got sounds (wav files), dvd-audio and MP3

  audio. But, all the audio to youtube FLV files including and all the WMA files are

  always static. Tried another card of Rocketfish without change. Deleted

  Drivers Realtek, disabled in BIOS Realtek, etc.. Uninstalled and

  Rocketfish reinstalled, etc.. I tried K-Lite Codecs and other codecs

  Pack. Nothing helps. Then I updated to Creative Sound Blaster

  Titanium with hundreds of MB of code and still have the same problem.

  Uninstalled UAA High definition Audio. No help. Still can not play

  YouTube or the Daily Show of any browser. (Video is good but the audio is

  (But static), the audio on msnbc video is good.
  Thanks for your suggestions.

  Hello

  We will run the next Fixit tool.

  Solve the problems of Windows Media Player video and other media or library

  If this does not resolve the issue, I would say that you post your question in the Forums Windows Entertainment and Connected Home .

  Windows Media Player - Windows Media Player - Windows/entertainment and the connected home

• HP deskjet all-in-one 3632: problems to make eprint to work

  OK, I'm having a problem making the printer to connect to the internet.

  I have a static IP address on my ISP.   I have 1 n600 Router 2 broadcasting networks.  1 5 g and 2 1. 4 g.   I used void net default 192.168.1.1 and 255.255.255.0.   This router I have a win 7 64 home computer hard wired. I also have a hard wired my Office Access point. the access point also broadcast a GIS of different 2.4 g.  all the sig.s wireless use wap2 Protocol and b/g catch up mode. and the names of all different but same network total network, if that makes sense.  OK, I have a total of 4 more also attached computer too either or network win7 32 ultimate win 7 64 and win vista 32. 2 tablets and 3 IH smrt 5.01 lolipop android running.  I have 2 security cams that have a static for IP and port forwarding on them.  everything works fine.  all computers are part of the same private network hmegroup.  I assigned a static ip address for printer dhcp table.  I can print from any device at any time via wifi.  NOW HERE'S THE PROBLEM.  whenever I go to the WEB form, he is saying that its not active all the check boxes and I don't know what a proxy server is but I know that I have not installed on this network so I click No proxy server.  The PRINTER SAYS UNABLE to CONNECT to the INTERNET.  every time that I tried about 20 this weekend.  It says to check the dns, gateway, blah blah blah.  so the DNS are correct and it shows not 192.168.1.1 as the gateway.  He also btw autodetected it correctly.  so when it fails to connect, I click on web print report. I get the page "get the most out of your printer.  and then a white page. and that's all.  at the top of the page to "get the most out of your printer" it says in "BOLD", "your printer is not connected to a network" which is BS do see on every device and every computer wireless or hard-wire. and I open it a new browser window using 192.168.1.143 which is the static ip address for this printer and bam. It opens right.

  When have I forgotten?  can I configure the gateway as the ip of the real gateway side the ISP of my router.   Im a little aggravated because the only reason why I got this printer from walmart that the PHN android already had the makings of plugin hp on them and I don't like HP is cause of all the fluff sofware that comes with them.  I almost had a gun, but they seem fragile and plasticy more than this one does.  so as I said work is expected for printing on the web.  I tried to press the eprint button and it flashes a little and nothing. I pressed it and the 'i' button and nothing ever prints other than the above page.  I have reset to the default values and done everything as configuration 2 x.

  If anyone can help, I would be very happy.

  facorbin

  Hey @Facorbin,

  Welcome to the Forum from HP Support.

  I see that you are unable to activate the webservices in the all-in-one printer HP Deskjet 3632. I want to help you with this. I have some suggestions that might help.

  I recommend you try the following steps:

  • Enter the IP address in a web browser , and press Enter to go directly to this page. This should take you to your built-in Web server (EWS) printer.
  • Click the network tab.
  • In the submenu on the left, click Networking.
  • Then click on the network (IP) address.
  • Click Manual DNS server.
  • DNS preferred as 8.8.8.8 manual entry
  • Auxiliary DNS server entry as 8.8.4.4
  • Click on apply to finalize this change.
  • Note that menu above EWS items can vary in overall models of printers. If you do not see the exact topics that I've listed here, the subtopic you should always appear on the Networking tab.

  If this goes through successfully, try to activate the web services () again. If you're still coming up short after this point, I recommend you enable DMZ mode in EWS your router, manually add the IP address of your printer. (Based on the level of detail, I suppose you're a statement you know what that means). After completing this step try to enable Web services one last time. Success?

  Please let me know the result of your troubleshooting by responding to this post. If I helped you to solve the problem and that you liked this post, feel free to express your thanks by clicking the "Thumbs Up" icon below by clicking on "Accept as Solution" (this will help others find the solution).

  Thanks for posting in the Forum from HP Support.

  Have a great day!

• Issue all try to perform the active database duplication with RMAN

  Hi all
  
  I would like to duplicate the database CURRENTLY to DATABASEB and must be performed in the same server. I tried to bounce the instance listener & databaseb several times, but no luck.
  
  Please help me solve this problem and why its happening.
  
  
  Step 1: The instance of DATABASEB is phase Nomount
  
  Step 2:
  
  
  == > tnsping DATABASEB
  
  AMT Ping utility for Linux: Version 11.2.0.2.0 - Production on 2012-SEP-11 07:36:54
  
  Copyright (c) 1997, 2010, Oracle. All rights reserved.
  
  Use settings files:
  
  
  TNSNAMES adapter used to resolve the alias
  Try to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = client) (PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = DATABASEB)(UR=A)))
  OK (10 ms)
  
  
  Step 3:
  
  == > rman target sys/***@DATABASEA auxiliary sys/***@DATABASEB
  
  Recovery Manager: release 11.2.0.2.0 - Production kills Sep 11 07:37:50 2012
  
  Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
  
  connected to target database: CURRENTLY (DBID = 1723462779)
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-00554: initialization of the package manager internal collection failed
  RMAN-04006: auxiliary database error: ORA-12514: TNS:listener is not currently of service requested in connect descriptor
  
  
  Thank you

  Hello;

  You need a static entry for this: (SID_LIST_LISTENER is the static entry)

  Example of

  DCLONE =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = TCP)(HOST = server.myhost.com)(PORT = 1521))
      (CONNECT_DATA =
        (SERVER = DEDICATED)
        (SERVICE_NAME = DCLONE.myhost.com)
      )
    )
  
  SID_LIST_LISTENER =
     (SID_LIST =
         (SID_DESC =
         (SID_NAME = PLSExtProc)
         (ORACLE_HOME = /u01/app/oracle/product/11.2.0.2)
         (PROGRAM = extproc)
       )
         (SID_DESC =
         (global_dbname = STEST.myhost.com)
         (ORACLE_HOME = /u01/app/oracle/product/11.2.0.2)
         (sid_name = STEST)
     )
    (SID_DESC =
         (global_dbname = DCLONE.myhost.com)
         (ORACLE_HOME = /u01/app/oracle/product/11.2.0.2)
         (sid_name = DCLONE)
     )
  )
  

  Make sure you stop and restart the receiver.

  The needs of the auxiliary Instance be started NOMOUNT on a file INIT.

  Given that its on the same server, you must DB_FILE_NAME_CONVERT and LOG_FILE_NAME_CONVERT in the INIT

  I have always copy and rename the password too.

  And the RMAN to connect as

  Target of $ORACLE_HOME/bin/rman = sys /auxiliary @source = sys /@clone

  connected to target database: SOURCE (DBID = 2236120765)
  connected to the auxiliary database: CLONE (unassembled)

  DUPLICATE THE TARGET DATABASE TO THE ACTIVE DATABASE NOFILENAMECHECK IPMTEST;

  H2. Another method

  http://www.Visi.com/~mseberg/create_a_duplicate_database_on_the_same_host.html

  Best regards

  mseberg

• Static variables in OAFramework

  Hello
  
  I'm stuck here seriously using static variables in my page. I have developed a few pages in OAFramework. I used more than 200 static variables in all pages. All is well for a single user. If more than 1 user using the page, the values are overlap between users. Now, I realized that its due to declare the values as static. How can I solve this problem?
  
  I would appreciate if someone can me advice on that.
  
  
  Jim.

  First solution to this problem is to convert all static variables to instance variables.
  However please provide details of the issue and why it is necessary to make them static.

  Abdul Wahid

• The wife and I have 2 iphones on the same backup mac computer / same itunes account and we have both got new iphone 7, her photos pop up fine for the restoration, my phone got all his own

  So under my account itunes on our desktop mac, my wife saved his phone as well.

  Today, we got the new iphone 7 s (and both save them on pc mac before we are gone and got the new), when we came back she hers in plugged into the mac PC first and she very well restored.

  When I tried to restore mine, all but the properly restored images.

  All his images restored on my phone, how can I fix this?

  ---

  Both are full of photos are in the title of the photos on my PC mac app.  They are separated and in a section mixed with each other, but still on the application of a single picture on our Mac... but that means I know all his and my photos are not all here which is good.

  So how I get off my iphone with its photos and all of mine on my iphone?  A sort of thing copy and paste?  Look forward to answers.

  Any help would be greatly appreciated!

  You share an Apple ID?

  On previous devices, you have the iCloud library enabled?

• I lost all of my extensions. In addition, my browser is weird.

  My browser has lost all its extensions on all of the user accounts on my computer. What is strange however is that on a single account, Facebook Messenger still shows up next to the search bar, but does not appear in the Add-ons Manager, so I can't really turn it off or remove it. Also, my tab modules a DownnSave suspicious 5.2 and 4.6 IIsave I don't remember installing.

  Suddenly, a Delta Search tab which I don't remember installing took the empty tabs. As the Facebook Messenger extension, she also does not appear in the add-on Manager.

  All these problems always happen when I restart Firefox without addons and even after I deleted the files extensions.*, compatibility.ini and add - ons.sqlite in the profile folders.

  I have considered using the reset in the Troubleshooting tab option, but that would remove all my addons, if I'm not mistaken. Is - this here anyway to solve the above problems without having to set my browser.

  Could you start by checking Control Panel, uninstalling an unwanted program for recently installed may have been bundled with one of your downloads? I recommend clicking on the column heading "installed on" to translate the most recent articles at the top and connect the dots of the different beams.

  You may also make a scrub set strong malware. This article lists the tools, Firefox users have found useful: Troubleshooting Firefox problems caused by malware.

  Regarding reset, your plugins will survive the process, as well as all of the installed system extensions. The Add-ons you will lose are installed extensions directly in this Firefox profile.

  Furthermore, in the case where Firefox made an automatic reset, could check old data of Firefox for desktop to a folder?

• Portege Z930 - boot with Dynadock docking station problem

  Hello!

  I wonder if anyone here can help.
  It seems impossible to start than my Z930 with the Dynadock (U3.0) attached to it.
  All I get is a blank screen - casting in and external screens are dead.
  Disconnect the Dynadock at this stage has no effect. I have the hard reset of the laptop.

  If I start the Z930 without the Dynadock attached I have no problem - and then I can join the Dynadock and all work just fine.

  So, it is right at boot.

  All the drivers are up to date.

  Is it the way it is supposed to work? Really? Seriously?

  Alex

  Dynadock is designed to work with laptop and this question should not happen.
  Can you please tell us a little more about your laptop?
  Do you use your Portege with factory settings (original preinstalled OS)?
  Which driver Dynadok do you use?
  I assume that in the beginning, everything was OK. Have you noticed this problem a few days later?
  Tell us a little more on the whole issue.

• IE needs more load using Dynadock V10 on Satellite Pro M70

  Hello

  When I use the Dynadock V10 on the satellite Pro M70 every time when a program has pictures in it, the need for long time to load, and for this time the mouse cursor is jumping. It appears in MS Internet Explorer as well as in MS Word.

  Is he maybe a bottleneck with all these different data to come take a simple USB cable?

  When I do not use the Dynadock, linking all the various cables directly with the satellite Pro error doesn't happen!
  Driver Grafik is on the most recent release and the operating system Windows XP SP3 and latest updates!
  I tried to uninstall the software Dynadoc, but the problem remains takes place.

  How can I solve the problem, because now the work is so bad, that the Dynadoc is not supposed!

  Thanks in advance!

  > When I use the Dynadock V10 on the satellite Pro M70 every time when a program has pictures in it, the need for long time to load, and for this time the mouse cursor is jumping. It appears in MS Internet Explorer as well as in MS Word.
  How to understand this?
  This happens on external monitor connected to the Dynadock or what?