javaw.exe error after installation

Similar Questions

• Explorer.EXE error after the restoration of the ERD Commander

  Dell Inspiron B130

  Windows XP Service Pack 2

  Recently performed a HD format and new installation of XP SP2. After I installed all the drivers and others, I checked that the system was operating normally. After a few days of use, Windows Update downloaded Service Pack 3 and asked me to install. I started to install SP3, but at about 50%, the laptop battery is dead at Midway through the installation. I plugged the laptop on the power source and power. I restarted the laptop and XP started only a completely black screen and the white slider. No ALT + CTRL + DEL, desktop icons, etc.

  I rebooted the laptop of ERD Commander, ran the restore system and selected the first available Restore Point. Point of restoration chosen was recorded a few days before, and was the first recorded point after the clean installed XP. I rebooted the XP system. Wallpaper loaded with white cursor, but NO start menu or desktop icon. A message appears saying "Explorer.EXE Application error, press OK to exit the application" or something very similar. Did not write the error code, but can get if necessary. If I press the OK button (which is my only option), there is still no icons on the desktop or the start menu. Only the cursor. No access ALT + CTRL + DELETE or something like that.

  Thinking about completely wipe the system and reinstalls the operating system. Any suggestions before I jump in this solution?

  Explorer.EXE error after the Restore Point of ERD Commander. Dell Inspiron B130. Recently clean installed XP SP2 on laptop. Installation of SP3, to 50%, battery dies the laptop right in the middle of the installation of the SP3 update. Restarted, XP starts with black screen with cursor only. ERD restart order and restore XP to the last known good config (I choose point immediately after XP clean install). Reboot to XP. Now the wallpaper shows as well as the error message saying "Explorer.exe Application error, click OK to exit Explorer" dialog and then I can't access anything. Any ideas?

  Hello

  What is the full and exact error message?

  Step 1: Check if you are able to boot into safe mode without any problem. If you are able to boot into safe mode without any problems then try to perform the clean boot to safe mode. Also disconnect any external devices connected to the computer.

  Reference:
  To start the computer in safe mode
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  Step 2: If you are still having the same problem, then you can the steps at the bottom of the article.
  How do I recover from a corrupted registry that prevents Windows XP startup
  http://support.Microsoft.com/kb/307545

• Error after installation of Service Pack 1 for Windows 7

  I use Windows 7 Ultimate and have just upgraded to win 7 SP1, but after installation, this error "AntiVir Scanner from the command line for Windows has stopped working" message whenever I open an application. These applications don't crash, but the forthcoming disorder with them is really annoying, and I don't know how to solve this problem, because I do not use AntiVirus software at the present time. So please help me. Thanks in advance much.

  [IMG] http://i1226.photobucket.com/albums/ee410/bug_bunny145/Untitled_zps82267e02.jpg [IMG]

  I thank very you much. At that time I used too many software use clean boot as a method to check if a program has been the source of this error, so I decided to reinstall Windows 7. I really appreciate your support. ^^

• error after installation of 6 l/r

  error after the installation of the drive.  Unable to create the required folder, error in switching modules

  Windows or Mac?

  If it's Mac, wants to see link below:

  Unable to create the required folder

• error after installation again: CPU0:1024) VMNIX: validation log < 0 > i/o Error.

  Hello

  I have just setup the new server ESX 3.5 U4 local storage only, I did the standard method after installation of complete starting the server with the following error:

  CPU0:1024) VMNIX: & lt; 0 & gt; validation log IO error.

  It starts and begins to ping, I have a connected remote console because I can't access it or via PUTTY or Vic when I press f1 to log I get this:

  "connect servername: EXT3-fs error (device cciss (104,6)) in start_transaction.

  Interrupted the newspaper. "

  I think it is clearly pointing to a problem of local storage, so I guess I can get a new set of readers and to re - install, but would like to know the community of entry I found lots of helpful tips here.

  Thanks in advance!

  • If you find this or any other answer useful please consider awarding points by scoring the correct or helpful answer *.

  File system is damaged.

  First try to fix with fsck.

  If you also see IO error in the kernel message (use dmesg and look at the last lines), then also could be a hardware problem.

  André

  * If you found this device or any other answer useful please consider awarding points for correct or helpful answers

• sprtcmd.exe error after the installation of windows updates.

  I installed the windows updates. now I can't connect to internet at all and when I reboot it starts with the sprtcmd.exe .net framework initialization error

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understand the Extras in Windows Vista and Windows Update info is at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  See you soon.

  Mick Murphy - Microsoft partner

• Satellite L10 - Hotkey.exe error after booting Windows 2000

  I've installed Windows 2000 on my Satellite L10 rather
  XP. After installing the utility Hotkey-I get an Error Message at every boot:

  Hotkey.exe - Entry Point not found
  The procedure entry point WTSUnRegisterSessionNotification could not be loaded into the WTSAPI32.dll dynamic link library.

  Same error Message When you try to manually start the Hotkey.exe.

  How can I solve this problem? The system works, but the
  Keys not.
  Thank you in advance for help!

  P.S.: As I read on the web, this error has nothing to do with the missing operating system XP - maybe the HotKey software does not work with Windows 2000. Where can I get a Hotkey software work for Windows 2000 for Satellite L10?
  I try to find it on the download from Toshiba site, but there is that some drivers for the L10 on Toshiba.com and the European server are only readers for XP :(

  Hi turmeric

  All the drivers, tools, and utilities are designed separately for each operating system. This means that you can not use tools designed for Windows XP Home edition with other operating system. You don't find utilities and tools because your device is not supported for the Windows 2000 operating system.
  I'm sorry.

• Re: Satellite L300 - 17l - Toshiba Power Saver gives me error after installation

  When I bought my L300 - 17l all the drivers of Toshiba drivers download pafe worked out well.
  Recently, I have reinstalled my OS XP and now I started to install all the drivers again. LAN has been authorized, WLAN was ok, the display driver has been authorized.

  But when I get to install Toshiba Power Saver (URL: [http://support1.toshiba-tro.de/tedd-files2/0/pwrsav-en-20080519172104.zip]) it gives me this error (it shows the error or after I cliquerai on finish the instalation or before installation began, as you can see in this screenshot)-[http://www.picvalley.net/v.php?p=u/2381/9078672171740560287.JPG]

  I later tried this - i go ot Control Panel and open Toshiba Power Saver, but then it gives me another error: "CANNOT be opened because you do not have access rights to use 'TOSHIBA Power Saver'.
  I reinstalled my XP again and it still gives me this error... I wonder what could be the problem... Please help me

  Hello

  Satellite L300 - 17L belongs to the PSLBCE series.
  I chose this model number and found exactly the same energy saving that you tried to install.
  So I guess that you have chosen the right Power Saver utility for this model of laptop.

  But did you also install the common Module?
  This software must be installed first before installing other tools.
  Update you the Win XP for the State?

  Check it!

• I get the blue screen error after installation of Visual Studio 2010 Professional Test Edition. Help?

  A brief overview of ALALA situation and how it happened:

  1. I went to microsoft.com and download Microsoft Visual Studio 2010 Professional Trial Edition

  2. I opted to use the Installer web pro (4.3 MB) and it correctly installed, restarted and completed the installation.

  3. I opened one of my previous Visual Studio 2008 Solutions and it prompted me to convert the solution.

  4. it is the solution converted successfully and open well.

  But now for some reason any my computer started to give me a blue screen. It forces the computer to restart, and then it connects back with errors:

  "The system has recovered from a serious error, a log of this error has been created"

  "Error signature".

  BCCode: 1000007f BCP1: 00000008 BCP2: BA348D70 BCP3: 00000000

  "BCP4: 00000000 OSVer: 5_1_2600 SP: 3_0 product: 256_1.

  "The following files should be included in this error report:
  C:\DOCUME~1\DSmith1\LOCALS~1\Temp\\WER81ad.dir00\Mini10311-04.dmp

  C:\DCUME~1\DSmith1\LOCALS~1\Temp\\WER81.ad.dir00\sysdata. XML ".

  It's about every 30 minutes now. It only started after installing Visual Studio. Any help?

  Hello

  You can check this link:

  General causes of errors "STOP 0x0000007F"

  http://support.Microsoft.com/kb/137539

• Windows vista activation problem product ID and Java (0xc0000005) fatal error after installation of windows vista format.

  Original title: try to put wrong question ID problem!

  Due to problems of Java, I formatted and made a new installation.  My Vista Home Premium says its active.  When I try to put my product id was not found. When I try to leave microsoft to find that they can't pick up my computer and I can't enter by hand, he said its incorrect.   When I try to ask online chat, I cut that they deal with activation problems.  It is activated, I can't get the Web site recognize my product id, so I can post for help?  The world is - that sound familiar at all?

  I have fatal routine Java errors when I play a game Runescape.  I'd appreciate any help anyone could give me. Thank you

  A fatal error has been detected by Java runtime environment:
  #
  # EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc = 0x6d884dca, pid = 3032, tid = 2976
  #
  # Version JRE: 6.0_30 - b12
  # Java VM: Java hotspot Client VM (20, 5 - b03 in mixed mode, sharing windows - x 86)
  # Problematic frame:
  # V [jvm.dll + 0x94dca]
  #
  # If you want to submit a bug report, please visit:
  # http://java.sun.com/webapps/bugreport/crash.jsp
  #

  Hi Verisetti,

  Have you installed security software after formatting windows?

  If so, you can uninstall the security software temporarily and check if you receive the access violation error.

  If the uninstallation of security software solves the problem, you may need to configure the settings of the software of safety accordingly. Please contact the software vendor for assistance in this regard.

  Note: Make sure that you install the security software after the trial.

  What about Windows vista product ID, you can try to validate Windows and check if it helps.

  For more information, see the following articles:

  What is the validation, and how does it work?

  Genuine Windows: Frequently asked questions

• Errors after installation of Service Pack 2 - 0xc0190002 xmllite.dll, crcdisk.sys and start-up config is corrupt error: 0 x 490

  original title: 0xc0190002 and config xmllite.dll and crcdisk.sys and boot is corrutp resutl error: 0 x 490 different codes and errors that I wrote down.

  I have a Dell Inspiron 1525.  It seems after I have updated to Vista with Service Pack 2 (I think) I think I destroyed my computer.  I can't use it.  I get a different error, '0xc0190002' and 'xmllite.dll' and "crcdisk.sys" and "Root Cause found: confi Boot is corrupted, repair action: repair of table of Partition follows: failed: error code 0 x 490" I used the disk I got from Dell for operating system, did a system repair, tried everything I could think of, but I'm not an expert.  Good by following the steps.  Have you tried a few things that have been listed here, thought he was fine, then I reboot and it turns a whole list of commands, and then stops at 1324/90509 or stops at crcdisk.sys...?  Can someone help me?

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until August 30, 2010.

  Microsoft free support for Vista SP2 at the link above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Dell recovery options:

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=339949

  Above is Dell to reinstall Vista from the DVD on your computer.

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=336966

  And that way if you have a recovery partition on your hard drive.

  See you soon

  Mick Murphy - Microsoft partner

• Getting DRIVER_IRQL_NOT_LESS_OR_EQUAL Error after installation of new equipment

  I use a desktop PC and to connect to the internet, I use the USB network cards. I recently bought ASUS N10, but he has not done a good job and left me with a lot of delay, so I switched to my Motorola WU830G. The Motorola adapter works perfectly, no lag at all, but the problem is after that I started to use my PC started to break up with error DRIVER_IRQL_NOT_LESS_OR_EQUAL. When I tried to unplug the WU830G I don't crash. Most likely, the problem is caused by the Motorola adapter but without it, I can't have good connection. My OS is Windows 7 Professional SP1. Does anyone have recommendations? Thank you.

  Try Envara or Motorola.  Another option is to install the driver you have in compatibility mode for windows xp, as this is the latest operating system for this model

  To install in compatibility mode do the following:

  Click with the right button on the installer > properties > compatibility > choose OS

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows?SignedIn=1

  () works in win 7, 8 to win and win 10)

• WCC - Systemproperties.exe problem after installation

  Hi all
  I install the new copy of the WCC and would like to make a systemproperties.exe for stand-alone applications configuration (for example, Batchloader etc.).
  I put the new password for the user "sysadmin". When I try to open systemproperties.exe it does not start with the following error:
  

  (internal) / 1 main 07,30 14:20:18.812! $Unable to start the application.

  (internal) / 1 14:20:18.812 07.30 main to intradoc.common.DefaultTraceImplementor.appendStackTrace(DefaultTraceImplementor.java:318)
  (internal) / 1 14:20:18.812 07.30 main to ntradoc.common.DefaultTraceImplementor.traceDumpException(DefaultTraceImplementor.java:437)
  (internal) / 1 14:20:18.812 07.30 main to intradoc.common.DefaultReportHandler.message(DefaultReportHandler.java:439)
  (internal) / 1 14:20:18.812 07.30 main to intradoc.common.DefaultReportDelegator.message(DefaultReportDelegator.java:140)
  (internal) / 1 14:20:18.812 07.30 main to intradoc.common.Report.messageInternal(Report.java:172)
  (internal) / 1 14:20:18.812 07.30 main to intradoc.common.Report.message(Report.java:154)
  (internal) / 1 14:20:18.812 07.30 main to intradoc.common.Report.fatal(Report.java:539)
  (internal) / 1 14:20:18.812 07.30 main to intradoc.common.SystemUtils.handleFatalException(SystemUtils.java:1008)
  (internal) / 1 14:20:18.812 07.30 main to SystemProperties.main (SystemProperties.java:78)
  (internal) / 1 14:20:18.812 07.30 main at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  (internal) / 1 14:20:18.812 07.30 main to sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
  (internal) / 1 14:20:18.812 07.30 main at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  (internal) / 1 14:20:18.812 07.30 main to java.lang.reflect.Method.invoke(Method.java:597)
  (internal) / 1 14:20:18.812 07.30 main to intradoc.loader.IdcClassLoader.invokeMain(IdcClassLoader.java:352)
  (internal) / 1 14:20:18.812 07.30 main to intradoc.loader.IdcClassLoader.startMain(IdcClassLoader.java:170)
  (internal) / 1 14:20:18.812 07.30 main to intradoc.loader.IdcClassLoader.main(IdcClassLoader.java:140)
  (internal) / 1 14:20:18.812 07.30 main caused by: java.lang.NullPointerException
  (internal) / 1 14:20:18.812 07.30 main to intradoc.server.IdcSystemConfig.configLocalization(IdcSystemConfig.java:889)
  (internal) / 1 14:20:18.812 07.30 main to intradoc.server.utils.IdcUtilityLoader.initLocalizationEx(IdcUtilityLoader.java:78)
  (internal) / 1 14:20:18.812 07.30 main to SystemProperties.main (SystemProperties.java:51)
  (internal) / 1 14:20:18.812 07.30 main... 7 more
  Cannot start the application.
  Null pointer is dereferenced.
  
  I'd appreciate any help on this matter.
  
  NIR

  Control Panel of server-> region and language-> tab Formats. If your format is not English (United States), this might be the reason. For me, it's like this since version PS1 until last PS5. After finishing with the properties of the system, simply return your format (language).

  Kind regards
  Boris

  Published by: tombo on 2012.07.31 04:20

• Lightroom 4 - "assertion Failed" error after installation

  I recently upgraded from 3.6 to 4.  Previously, I tried to install the beta 4 Lightoom and tried to open a 3.6 catalog.  When it did not work, I uninstalled everything that Lightroom beta 4.

  Now, when I installed Lightroom 4 (upgraded version), installation takes place without incident.  However, I can't open the program without crashing.  The error message is "assertion failure" indicated that additional details about the error.

  Signature of the problem:

  Problem event name: APPCRASH

  Application name: lightroom.exe

  Application version: 4.0.0.10

  Application timestamp: 4f45ddd8

  Fault Module name: ntdll.dll

  Fault Module Version: 6.1.7601.17725

  Timestamp of Module error: 4ec4aa8e

  Exception code: c015000f

  Exception offset: 000000000006fd5c

  OS version: 6.1.7601.2.1.0.256.48

  Locale ID: 1033

  I guess it has something to do with my previous beta installation of Lightroom 4 leftover (which has subsequently been uninstalled prior to complete installation of Lightroom 4).  Does anyone know where the catalog is located by default and if I can solve this problem by deleting / renaming the catalog (if that's the problem).

  Thank you

  OK it's corrected now.  Locate the file catalog Lightroom 3 and opening it in Lightroom 4 (right click and choose the program...) prompted me to update the catalog.  This solves the problem

• Satellite Pro P300: Error after installation of battery 8.00.02 BT WIN 7 32-bit

  I upgraded my Satellite Pro P300 Vista Win7 Pro 32-bit.
  The programs and existing drivers had (compatibility) problem with Win 7 whitch is indicated when installing Win 7 Pro 32-bit.
  So I download and install this new battery.

  In the peripheral equipment there are a 3-port BT. But the software (settings, communications, etc.) does not start...

  for example: BtAssist.exe - failed to execute (Dutch: toepassingsfout), may not start successfully this applicaton (0xc00000be, click Ok to exit).

  Someone at - it ideas?
  Everything worked fine before installen Win 7.

  Thanks already

  Eric

  Hello

  You did a clean install of Windows 7, or you have upgraded the Vista to Win 7?

  I recommend a new installation of Windows 7. It's better, because an upgrade from Vista to Windows 7 could leave some junk on the HARD drive and some tools/drivers Vista is not compatible with Win 7 OS.

  So to do a clean install of Windows 7, then download and install the new BT stack from this page:
  http://APS2.toshiba-tro.de/Bluetooth/

  Good luck