WCC - Systemproperties.exe problem after installation

Similar Questions

• TFncKy.exe problem after upgrade to XP SP3 on Satellite A200

  Hello

  After upgrade of XP SP3, I have problem with TFncky.

  _System_:
  A200/PSAE7
  -XP Pro (2 x with OS selector, 1 OS XP XP main, 2nd XP for games)

  _Problem_:
  After booting XP from my main XP installation I always get an error message pop up stating that there is no prob with TFncKy and TFncKy should be stopped. As "signature of the problem" I get the following:

  + AppName: tfncky.exe AppVer: 3.22.0.0 ModName: ntdll.dll +.
  + ModVer: 5.1.2600.5512 Offset: 00012ace +.

  With one of the following keys on keyboard always results in above described error pop up but key are functional:
  WinLogo, DEL, HOME, PGUP /-DN, END, right SHIFT, FN + keys F etc.

  My second installation of XP (Lite for games) short smooth after SP3 upgrade: no error TFncKy error message.

  As my second XP runs without any problems after SP3 I'm not sure if the proplem is related with + tfncky.exe + or + ntdll.dll +.

  BTW:
  What driver package includes "tfncky.exe? Toshiba controls?

  Thanks in advance for any information or advice for this problem!

  Best regards
  Andreas

  Hello

  the problem was already discussed in another thread: http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=18082

  The last message was probably the solution for the whole of the case. The mentioned user that "TfncKy.exe" belongs to the Toshiba Hotkey utility that only needs to be removed and reinstalled for this problem.

  In addition, it would be wise to check the registry with CCleaner for example before you reinstall the Hotkey utility.

  See you soon

• Boot problem after installation of Linux Mandrake 10

  Hello!
  I installed Mandrake 10 on my computer toshiba tecra S1 laptop.
  But after installation and restart, the laptop stops in sequence starting with the toshiba logo.

  I tried the F12 key to select the boot device, but it does not work.

  If you have a solution to this problem please tell me.

  Thanks in advance.

  Hello

  It is not easy to tell what the problem may be, but it is possible that the boot manager not properly installed.

• I have my computer give a problem after installation CC LR accendentialy

  I have my computer give a problem after accendentialy installation LR CC while I had 6.4 LR, no CC. I could not come back, and a new installation be not admitted. The CC tool does nothing and now I have a huge problem.

  I install windows 7 now still fresh on my pc and install again LR 6.4. I read diverend answers on the forums, my question is: should I turn you off my first LR? I can not install 6.4 and have temporary installed 5.7.

  Under the help button I would not find a deativate more. What should do?

  Hi rfh.

  Please let us know what exactly is the issue that you are facing after installing Lightroom CC?

  If you already have Lightroom 6.4, Lightroom CC will not be installed separately.

  The CC tool does nothing and now I have a huge problem.

  Please visit Adobe Creative Cloud desktop application does not open or shows a spinning wheel of progress

  I read diverend answers on the forums, my question is: should I turn you off my first LR? I can not install 6.4 and have temporary installed 5.7.

  Under the help button I would not find a deativate more. What should do?

  Lightroom does not disable the menu help . Uninstalling Lightroom should turn off.

  Kind regards

  Assani

• Problem after installation of the uniblue registry booster

  After installation, I started to make a request to make changes to this computer to yahoo and google bars of tools, then adobe who, most or all it's demand for the flash player to make changes to this computer. to do this, these pop-up windows asking constantly especially when change page or just read a. the toolbaars can ask once, but takes three clicks to accept the order, adobe flash player allow takes 5 clicks stops and then restarts and continues until I shud turn off the PC. Can anyone help?

  Hello

  Firstly uninstall the UniBlue - Panel configuration-programs and features or check with
  UnIBlue support for uninstallation methods.

  ----------------

  Then use the system restore BEFORE you uninstalled UniBlue which will ensure
  None of this is left in effect on the system.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  I hope this helps.

• Problem after installation of window upates

  Original title: windows 7 problems because microsoft updates this week

  Hello

  Since the latest windows updates this week, MS computer windows 7 my husband does not work correctly.

  Most of the time there was no internet connection, although my laptop in the same room connects.

  Worse, it's his slider has the circle of rotation that continues for hours.

  I did F8, then: Startup Repair. memory diagnostic; System Restore (pre update); last good configuration...

  I'm not grumpy, so don't want something complex to do.

  Without a doubt-related updates.

  His computer crashed the first time they went, in automatically.

  When I finally received it goes and makes system restore, then downloaded the updates one by one with reboot between each of them and create a system restore point before each new updated the laptop seems to work again.

  Stop us it, but the major problem started once it was lit again in the afternoon. Really frustrating and such a waste of time.

  Any suggestions?

  Do not clean the computer and reinstall, so please do not suggest that.

  My deep gratitude.

  JM

  Hello Craig,.

  I understand the inconvenience you encountered.

  According to the description, I understand her you are facing problem after installing windows updates.

  I would be grateful if you can provide us with the following information to help us better understand the issue.

  1. Did you do any change important before this problem?

  2. What is the brand and model of your system?

  3. Are you an error message\ error code on your system?

  To resolve this issue, you need to determine the cause of the Windows Explorer to stop functioning, try the troubleshooting steps below to help decide the issue.

  Method 1.

  Step 1. Try to go into safe mode with network and check.

  Start the computer in safe mode and check if the problem persists. Safe mode is a diagnostic mode in which you are connected with only the minimal necessary services and active pilots. Check if the number is reproduced.

  To switch to safe mode see the link given below

  Try to go to safe mode with networking and check.

  http://Windows.Microsoft.com/en-us/Windows-8/Windows-startup-settings-safe-mode

  If the problem does not exist in safe mode, try to perform a clean boot and check.

  Step 2: Perform the clean boot.

  Place your system in the clean boot state helps determine if third-party applications or startup items are causing the problem. Check this question in the clean boot state.

  Reference: How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, read the sections "How to reset the computer to start as usual after a clean boot troubleshooting" in the link provided to return the computer to a Normal startup mode.

  If the problem persists, try Method 2.

  Method 2 System File Checker.

  You can run the System File Checker tool and check if it helps. SFC scan will scan system files corrupted on your computer. You can read the following article to use the appropriate System File Checker tool.

  Use the System File Checker tool to repair missing or corrupted system files.

  http://support.Microsoft.com/kb/929833/en-us

  Hope this information is useful. Please let us know if you need help with Windows.

  Thank you

• 650 HP laptop Windows 7 64-bit boot problem after installation of the graphics driver

  I bought the HP 650 laptop which came with Suse Linux.

  I installed 64-bit Windows and tried to install the corresponding graphics driver:

  High definition (HD) of Intel Graphics Driver

  as indicated in the list of drivers for Windows 64-bit here:

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=5225013&...

  After installing the driver asked me to restart the computer and after the reboot, boot, Windows boot after displaying the Windows logo on black background the computer restarts again before you boot into Windows.

  After this crash to start a startup repair is suggested and I can complete the restore of the system that allows me to connect to Windows but I have not installed display drivers and things like Aero do not work.

  I tried several times and re - install drivers and had the same problem after each attempt.

  Help, please.

  It's quite a few updates failed.  This can be linked to the issue, but we don't know really until the update problem is resolved.

  Read this document to Microsoft as it addresses this particular error.  It also has various tools to try in case the first option does not correct the problem.

  You can also try the Windows Update troubleshooting utility included in Windows 7.

  Go to start > Control Panel > find and solve the problems under system and security > fixed problems with Windows Update under system and security.

  Let me know what happens.

• Problem after installation of SP1 on my laptop

  Windows Update prompted me to install SP1. thought it was another update so let it. But after installing I rebbooted my laptop and got an error:! oxc0190036! 1501/91936 (netprofm.dll) I rebooted and ran the Startup Repair. After he runs Windows continues to start and then screen works in black with text of registry and gets stuck or feezes on the line above again. Need help!

  There is no anti-virus installed in my computer

  The lack of antivirus real-time protection isn't the source of your problem, Vista SP1.

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) won't fix this!

  HOW to do a clean install of Vista: section "If you want to reinstall Windows Vista by running a new installation...". "of http://windows.microsoft.com/en-us/windows-vista/Installing-and-reinstalling-Windows-Vista#section_3

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the page following before otherwise connect the machine to a network or the internet and before using a flash drive or the SD card that is not brand new, or has not been freshly formatted:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the removal tool before installing updates, Windows Service Packs, or updates IE and before installing your new anti-virus application.

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  See also:

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Problem after installation of Windows XP Home on Satellite L355-S7812

  Hello

  I went down to WXP and after that, I have problem with the display driver. It does not work. I tried to use the Toshiba site and installation was successful, but without effect. Information about Device Manager, is that this driver is corrupted or missing. Drivers from the Intel site is not allowed to install. I have Mobile Intel 965 Chipset Family Extress.
  I also have the problem with some "IDE Device" I don't know what it is.
  I tied with WXP + SP2, SP3, and Windows XP Home edition. The same result.

  Help, please.

  Hello

  Strange sounds, running an Intel display driver won´t. It is the first time I ve never heard for such a thing. First of all:

  Installed all THE drivers of Windows XP on the Toshiba site? It's really important because there are essential tools that are the reason this machine works correctly and with his overall performance and stability.

  Are installed the chipset drivers? If Yes, then I do not double because the display drivers intel today should be able to be installed on your machine.
  What display driver you have installed? There are different types for the same chipset, and you should be careful when downloading these drivers for your machine. You should always look for drivers who adapt for MOBILE chipsets. In this case, you should look for the 965 Express mobile chipset.

  Regarding your problem of IDE device: do you have that you have installed the Intel Matrix Storage Manager Manager? See also the Intel site for this driver and the problem should go away.

  Welcome them

• Problems after installation of Service Pack 3 for Windows xp?

  After you install service pack 3, he started down, then when he tried to start it, nothing, that would make the windows logo then a blue screen. I tried to do a system restore, nothing, I tried to move the date of return in the bio, still nothing, I was payin 120.00 for someone to sit in front of my computer for 3 hours and IT couldn't work, but he ended up doing a full system restore, fortunately, I still have my photos and music but now his works more slowly. He guard tells me to download the package, tried again and poof, done the SAME thing again, this time I did the full restore again and now I'm not even download package. Y at - it something I can do or download for my computer as if it was. I did Defrag, I did the cleaning disc, cookies.etc... I clean up all this. I'm afraid to download updates due to what happened before... Help!

  Backup of personal data (which none should be considered 100% reliable at this point) then do a format and clean install of Windows.  Please note that another repair facility (upgrade AKA on-site) will NOT fix it! [1]

  HOW to do a clean install of Windows XP: see method 1 and http://michaelstevenstech.com/cleanxpinstall.html#steps in http://support.microsoft.com/kb/978307

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or a network otherwise and before using a USB key that is not brand new, or has not been freshly formatted:

  5 steps to help protect your new computer before going online
       http://www.Microsoft.com/protect/computer/advanced/XPPC.mspx

  Other useful references include:

  HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the deletion appropriate before installing any Windows Service Packs or IE updates and before installing your new anti-virus application (which will require to install WinXP SP3).

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  See also:

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  ==============
  [1] one who made the "repair" work & you charged $120 to do a repair installation does not know his a * of his elbow. IMHO he should take care of all of the foregoing to you free of charge.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Problems after installation with XP Service Pack 3 (screen please wait too long)

  After the automatic updates is ready to install and upgrade to SP3 of XP SP2, I have selected only quick installation and the installation progress. For a few minutes, everything seemed perfect, and I could see "Validating license... blah blah components loading... create restore point etc..". And after that, I was responsible for "System restart" I did. And then, the system displays a black screen of "Windows XP" showing "Please wait...". "and the screen is left as it is around 6-7 hours and the 256 Kbps, the internet was still on. After that, I wake up, find the same on the screen and close by the computer strength.

  After the reboot, I've seen the system configuration of Windows XP Professional SP2 to SP3. And one of my theme request then said that "he delivered a fall has resorted to previous settings.

  So, is my Windows corrupted, or incomplete installation? How will I know that the installation is successful? Please guide.

  Thank you

  Hi xploreaj,

  I noticed that often happens when a system has something like Norton or McAfee installed and that it has not been disabled prior to installation of the SP3.  If you encounter any other problems, then it is reasonable to assume that everything is ok.  However, you can also scan your system with Malwarebytes to see if there is no infections present which your current AV software has not picked up on. (how to use Malwarebytes: http://www.bleepingcomputer.com/virus-removal/how-to-use-malwarebytes-anti-malware-tutorial).

  --> I hope this helps! Please mark it as correct answer or vote if it does :)<>

  http://www.pcuk.biz - my website
  

  Info from Microsoft about phishing . Information from Microsoft on the fake security software

• Problem after installation v.31

  After installing Firefox 31.0NL, it appeared that ALL my .pdf documents have been changed to HTML format and readable anymore. During the installation, it's had not shown abnormal things and no warning given. It was not here?

  You have already marked the solved thread before, but they remain open for some time before be archived. To stop using e-mail notifications, you can use the link to the right of your question under the "Question tooks' = > «Stop Email Updates»

• Satellite A210 - 4 1: Winload.exe problem after having used the product recovery disc

  Hello

  I could really do with some help here. I have a PC laptop Toshiba Satellite A210 - 1 4. Disk partitioned with Vista home premium service pack 4.0.

  Last night, I used the product recovery disc supllied with the laptop in an attempt to restore its initial configuration.

  and the end of the procedure, I find myself with a prompt cmd with X:\windows\system32\cmd.exe in the high bit blue box indicating:

  Error: imageX could not apply vista F:\05993xsp.swm Index 2 of ODD to C:\!

  Press a key to continue. Box disappears then an administrator: X:\windows\system32\cmd.exe in the top blue bit indicating:

  waiting for ODD vacancies...
  STRANGE drive f: loan.
  Look for support in the F: drive...
  Failed to initialize the raid class.
  No RAID - continue normally...

  X:\Windows\System32 >

  Now every time the laptop trying to restart it just comes up with the error message:

  CANNOT START WINDOWS. A RECENT HARDWARE CHANGE OR SOFTWARE MAY BE THE
  CAUSE
  FILE: \WINDOWS\SYSTEM32\WINLOAD. EXE
  STATUS: 0XC000000E
  INFO: THE SELECTED ENTRY COULD NOT BE LOADED BECAUSE THE APPLICATION
  IS MISSING OR DAMAGED

  Below I have then have the possibility of esc or continue with the same result of the system attempts to restart.

  The recovery disc has no option of repair on this subject.

  need help please, I have no idea.

  Thank you

  Hello

  Looks like something was wrong during the recovery procedure.
  Have you tried to recover the laptop once more?
  If this isn't the case, you should definitely try this!

  You are right; hasn t drive recovery option for the repair because the recovery disk is not the same as a MS Vista drive. The recovery disk contains image files (it s a package) and the files contains Vista, Toshiba drivers, tools and additional software.

  So if something was happening well wrung out during the recovery procedure, you will not be able to repair the installation of the OS, but you need to run it again.

• Re: Satellite A505-S6040 - strange problem after installation of the NVIDIA driver

  Hello, first of all sorry for my bad English, but ill try to explain myself as best I can.

  I have a Toshiba A505-S6040

  I like 2 months

  My problem is that when I start the laptop and go to the desktop theres a certain point that stop loading... and it gets freeze here until I have to reset manually... (I can go trough well safe mode).

  I don't know if that has soemthing to do with him... but I downloaded and install a new driver from nvidia website. After trying several days, I noticed that there were a few problems, and so I changed it again drivers from the Toshiba web page.

  Well 2 days this is well... I might do normally...

  OK, I decided to use the recovery tool fromToshiba, but the same problem happened while isntallin drivers se... I don't know if it was coincidence, but just after it install drivers from nividia it just stop working again... it froze again... and now it won't let me start with an account , because it gets has frozen afe mode, only I can access my laptop...

  one thing I tried was unisitallin the drivers nvidia in SafeMode... and try to start the laptop... it worked... or at leat is not trapped, but since I made the recovery of Toshiba it won't let me start the session.

  I have really no idea what could it be... the grpahic card?

  Thank you.

  Hello

  > I don't know if that has soemthing to do with him... but I downloaded and install a new driver from nvidia website. After trying several days, I noticed there were a few problems and so I
  > changed drivers again

  It looks like a card driver from nvidia.com graphci causes freezing. In addition, it is not recommended to only use not pre-tested by Toshiba driver. Toshiba drivers are modified to support protection against overheating. So, use only the drivers of Toshiba driver page.

• C4480 scan problem after installation of Snow Leapard

  I can't scan using C4480 printer after installing Snow Leapard. When I try to print message pops up saying communication error.  How can I solve this problem quickly.

  Please provide a rapid response