JDK 7u2 Windows 64-bit installation issues

Similar Questions

• 32-bit installation issues - Vista Entry Point not found error

  I'm doing a clean install of Windows Vista 32 Bit in Windows 2000 (Service Pack 4). When the installation asks you which drive I would install windows for, as I have Sata drives running of a Sata/RAID controller card he asked pilots. Any version of this driver, I offer for this installation fails with the following error "Windows Installer: setup.exe - Entry Point not found - the procedure entry point LZClose could not be found in KERNEL32.dll dynamic link library ' I have a Silicon Image Sil 3513 SATALink PCI controller that manages my hard drives. The same drivers worked well to install Windows 2000. As I upgrade to Vista version I can only run through the windows so I could not try and see if it will install directly from DOS.

  Thank you

  James

  Found a solution. I use the Windows Vista upgrade version & thus tried to install through Windows 2000. However Win 2 k interfaces drives in a different mode of Vista, while he was in conflict. I solved the problem by installing Vista via the bootable disc.

  Now just to find the compatible drivers for my asus motherboard and aircraft... Grrrr I'm sure I got this Vista computer previously without all these headaches...

• 8.1 Windows 64 - bit Hibernbate issues

  Hi after installing a 64-bit Windows 8.1, I have a laptop Hibernate issues did not go for hibernation all power remains on the HARD disk and the system stuck between State intermediary niether in standby mode or stop mode please me on this problem.

  I also installed a BIOS update, but questions remains the same

  No37tx Pavilion HP 15

  I-5 Basic 4200U

  4 GB of ram

  Hello @Ahmed-Aslam,.

  I read your post on how your laptop is not able to correctly standby extended after you have reinstalled Windows, and I'd be happy to help!

  For more to diagnose this problem, I recommend that you follow the steps described in this document on the sleep and Hibernate in Windows 8 Troubleshooting, issues. This should help to configure your successfully power management settings.

  Please re-post with the results of your troubleshooting, and I look forward to your response!

  Concerning

• Use of EPMA 11.1.2 to install on windows 32-bit installation files 7

  Hi all Experts,
  
  I need direction to download the EPMA Hyperion 11.1.2 of what link I could download and then I use 32-bit configuration files to install 64-bit WINDOWS7.
  is it possible to have Essbase, HFM and FDM HFR tool correctly with 64-bit windows 7 for 32-bit to 11.1.2 and compatible installation files.
  Please let us know your valuable suggestions.
  
  Thanks in advance

  Go to https://edelivery.oracle.com/
  Select Oracle Enterprise Performance Management System and the platform.
  Select the version of the EMP.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Windows Update and installation issues

  Hello all and thanks in advance for your help.  I have many problems installing Windows Update as well as the impossibility to install Windows Live Messenger Update.  I guess that this combination of problems is native to Windows Installer.  I disabled all the antivirus and firewall software.  When you try to install Windows Installer 4.5, I get the error message "the following updates were not installed" fix for Windows (KB942288).  Displays the update of Windows Event Viewer 'Hotfix for Windows (KB942288)' could not be installed because of an error: 2149842978 "' (command line:""C:\Windows\system32\wusa.exe" "C:\Users\Diana\Documents\Software\Windows Installer\Windows6.0-KB942288-v2-x64.msu" ").  What attmepting to install updates, the "Preparing to install" message displays without progressing.  When you try to install windows live updates, I get a meesage that interferes with the installation a conflicting application.  I rebooted several times and run Windows Installer Cleanup without success.  Any help would be greatly appreciated.  OS is Vista Ultimate x 64.

  Hello

  Try these 1 - cleaning if possible and then rerun the installer of Windows.

  Spotlight utility Windows Installer CleanUp Utility
  http://TechNet.Microsoft.com/en-us/magazine/2008.08.UtilitySpotlight.aspx

  Description of the Windows Installer CleanUp utility
  http://support.Microsoft.com/kb/290301

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  -------------------------------------------------------------

  Run these to see if they can clearly until the update installs.

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Where to download JDK for Windows 64-bit appropriate?

  Hi nice people.
  
  I have donwloaded the latest version of SQL developr for x 86-64 bit.
  
  The JDK comes with.
  
  A link is provided for download. I downloaded Java SE 7. But sqldeveloper did not like what he said something like, this isn't a supported something JDK version. Now when I try to run sqldevelopper I get a message from beautiful error "cannot start because MSVCR100.dll was not found.
  
  What can I do now?
  
  If I could just download the 'good' version of the JDK, but unfortunately the site Java 6 or Java 7, we see, but we do not have something like "JDK1.6.0_11".
  
  Thank you for helping a DBA java model.
  
  Christian

  The next time you are Googling on 'Download jdk', look at the entire page of the first item returned (from Oracle). Because the JDK 7 is the new version, JDK 6 is now located at the bottom of the page.

  You can download here:

  http://www.Oracle.com/technetwork/Java/javase/downloads/JDK-6u27-download-440405.html

• CS6 Upgrade on Win7 64 bit installation issues

  I bought the upgrade to CS4 CS6 Design and Web Premium versions.  I tried 4 times now to install, with varying degrees of success.  The first attempt installed nearly half of the products and gave a list of egregious errors. The second installed everything except Acrobat and InDesign. Subsequent attempts to install only these two additional programs always give a "Setup Failed" and a seemingly common problem through all the latest versions and operating systems of the Installer do not access to certain files/folders.

  EDIT: The installer has also always said that the machine needs to reboot, when it comes to be restarted and certainly does not!  I continue anyway.

  I already deleted the Temp folder with no difference, and NIS2012 is disabled during installation.

  Any ideas of how to get these last two vital programs to install please?

  My last setup log is:-

  Exit code: 7

  Please see the faults and warnings below for troubleshooting. For example, ERROR: DF024, DW063...

  -------------------------------------- Summary --------------------------------------

  -0 fatal Error (s), 52 (s), 0 warning (s)

  -Payload: {539AEF15-3A2B-4A31-A587-7E90F7D9C700} camera profiles Installer 7.0.0.0 -.

  ERROR: DF024: cannot move the file in "C:\Program Files (x 86) \Common {539AEF15-3A2B-4A31-A587-7E90F7D9C700} \_464_81cd902968d7 fd801cbc3330bb0e41b9" to "C:\ProgramData\Adobe\CameraRaw\CameraProfiles\Camera\Canon EOS - 1Ds Mark II\Canon EOS - 1Ds Mark II camera Standard.dcp" error 32 the process cannot access the file because it is being used by another process. (Seq. 464)

  ERROR: DW063: ARKMoveFileCommand of command failed. (Seq. 464)

  -Payload: {8706963D-5F48-47CC-998B-DAB70B089DB8} Suite shared Configuration CS6 3.0.0.0 -.

  ERROR: DF024: cannot move the file in "C:\Program Files (x 86) \Common {8706963D-5F48-47CC-998B-DAB70B089DB8} \_29_fe89ef03bbfb8 68d96427c4cc0f8ec2a" to "C:\Program Files (x 86) \Common ' error 32 the process cannot access the file because it is being used by another process. (Seq 27)

  ERROR: DW063: ARKMoveFileCommand of command failed. (Seq 27)

  ERROR: DF024: cannot restore the file in "C:\Program Files (x 86) \Common Files\Adobe\ssc\CreativeCloud-CS6-Mac-GM\SLConfig.xml" from backup to 'C:\adobeTemp\backup\adobetmp04669361' error 32 the process cannot access the file because it is being used by another process. " (Seq 2)

  ERROR: DW063: error to reverse the order ARKDeleteFileCommand (Seq 2)

  ERROR: DW050: the following payload errors were found during the installation:

  ERROR: DW050:-Adobe XMP panels: installation failed

  ERROR: DW050:-AdobeColorCommonSetCMYK CS6: installation failed

  ERROR: DW050:-AdobeColorEU CS6: installation failed

  ERROR: DW050:-Adobe Toolhints CS6: installation failed

  ERROR: DW050:-AdobeColorJA CS6: installation failed

  ERROR: DW050:-Adobe InDesign CS6 icon Handler x 64: installation failed

  ERROR: DW050:-Adobe InDesign CS6 Common Language Files_AdobeInDesign8CommonLang-en_GB: installation failed

  ERROR: DW050:-Installation of common fonts required: installation failed

  ERROR: DW050:-Adobe Player for embedding 3.3: installation failed

  ERROR: DW050:-Adobe CSXS Infrastructure CS6: installation failed

  ERROR: DW050:-CS6 Design and Web Premium: installation failed

  ERROR: DW050:-AdobeColorNA CS6: installation failed

  ERROR: DW050:-DPS Desktop Tools CS6: installation failed

  ERROR: DW050:-camera profiles Installer: installation failed

  ERROR: DW050:-AdobePDFL CS6: installation failed

  ERROR: DW050:-Adobe InDesign CS6 Common Language Files_AdobeInDesign8CommonLang-en_US: installation failed

  ERROR: DW050:-Adobe Hunspell Linguistics Plugin CS6: installation failed

  ERROR: DW050:-CS6 settings PDF: installation failed

  ERROR: DW050:-CS6 Adobe Extension Manager: installation failed

  ERROR: DW050:-NPS Adobe Panel: installation failed

  ERROR: DW050:-Suite Shared Configuration CS6: installation failed

  ERROR: DW050:-Files_AdobeInDesign8AppLang-fr_FR CS6 Application Adobe InDesign language: installation failed

  ERROR: DW050:-Adobe WinSoft Linguistics Plugin CS6: installation failed

  ERROR: DW050:-Adobe Bridge CS6: installation failed

  ERROR: DW050:-Microsoft Visual C++ 2008 Redistributable Package (x 64): installation failed

  ERROR: DW050:-Microsoft Visual C++ 2008 Redistributable Package (x 86): installation failed

  ERROR: DW050:-Package redistributable Microsoft Visual C++ 2010 (x 64): installation failed

  ERROR: DW050:-AdobeTypeSupport CS6: installation failed

  ERROR: DW050:-core files common Adobe InDesign CS6: installation failed

  ERROR: DW050:-Acrobat Professional: installation failed

  ERROR: DW050:-Adobe InDesign Feature Set Application files CS6: installation failed

  ERROR: DW050:-Adobe Mini Bridge CS6: installation failed

  ERROR: DW050:-AdobeColorCommonSetRGB CS6: installation failed

  ERROR: DW050:-standard Adobe 2.0: installation failed

  ERROR: DW050:-Basic Application of the CS6 Adobe InDesign files: due to a lack of Language Pack installation

  ERROR: DW050:-Photoshop Camera Raw 7: installation failed

  ERROR: DW050:-AdobeHelp: installation failed

  ERROR: DW050:-Adobe CS6 language: installation failed

  ERROR: DW050:-Installation of recommended common fonts: installation failed

  ERROR: DW050:-DynamiclinkSupport: installation failed

  ERROR: DW050:-AdobeCMaps CS6: installation failed

  ERROR: DW050:-Adobe CSXS Extensions CS6: installation failed

  ERROR: DW050:-Adobe InDesign CS6 icon Handler: installation failed

  ERROR: DW050:-Adobe ExtendScript Toolkit CS6: installation failed

  ERROR: DW050:-Adobe Media Encoder CS6 X 64: installation failed

  ERROR: DW050:-Adobe InDesign Application Base Files2 CS6: installation failed

  -------------------------------------------------------------------------------------

  THX

  Colin

  Post edited by: cdyckes

  It seems that if you have a very similar problem to the one I had before you run the cleanup utility (that you ran).

  I finally got my Acrobat to install by running again the installation, accepting the single selection Acrobat and, then, the important thing for me, using a BACK level administrator window command to deliver a "net stop spooler"to the point that the Adobe installer said it was "stop services system" and then, a little while later , a "net start spooler" when he said he tried to re - start.

  He got the product in version installed and work, but, unfortunately, the same trick does not work when I run the update, so I am stuck currently impossible to install any security (or other) updates for Acrobat X.

  I'm sure this has something to do with the appropriate rights to start and stop system services and wish just that Adobe would allow individual installers run explicitly so that they have the appropriate privileges.  Unfortunately they do not, probably to make sure you install the entire suite on a single machine, but their online activation should covering anyway.

  I must say that I am disgusted that a product at this price level could have a such laminated Installer!

  Sorry I can't help with your problem. I suggest that you create a fresh desired thread as this one seems to have been pushed to the bottom of the stack.

  Colin

• Windows fax component installation issue.

  My windows fax service leave recently. I don't know when, I the have not used more than six months.  The service was in a strange state, start-up is automatic, but also, I remember having seen 'disabled' and 'stop' in the service window. The only changes made recently were the installion of Microsoft Office Home and Student.

  I tried to uninstall the component and reinstall it.  Two processes completed with no error message, but the component has not been installed.

  Event 32045

  Fax service failed to initialize because it could not initialize the TAPI devices.

  Check that the fax modem is installed and configured correctly. Win32 error code: 31. This error code indicates the cause of the error.

  For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp .

  has been recorded in the event viewer. but the relationship had no information available.

  If I go to "printers and faxes" and click "Fax Setup" I see a printer called "fax" appears momentarily in the list of printers, but I get an error pop up on "no default e-mail client, please run outlook and set it as the default mail client", then disappears from the fax printer.  The system event viewer shows start the fax, the printer service which are initialized and stopped and deleted!

  My boy me I confused... Help, please.

  Glen

  UPDATE: I found the cause... Trend Micro unauthorized change prevention was the cause... I turned it off temporarily and everything works!

  Thank you

  Glen

  UPDATE: I found the cause... Trend Micro unauthorized change prevention was the cause... I turned it off temporarily and everything works!

  Thank you

  Glen

• 32-bit installation of Windows 7 on HP Elite 8200 Ultra Slim 64-bit

  Hi, I have big Windows 7 32 bit installation issues on our HP Elite 8200 Ultra Slim A2K41ET of 64-bit PC.

  The mediums of recovery are all for 64-bit

  We are a school using RM CC4 that installs Windows 7 32 bits for all client systems. Our server system does not accept the 32-bit driver for HP, so I was unable to deploy Windows 7 on our new HP Elite 8200.

  I really need the 32-bit driver, including the .ini to add to our file generation software, but I couldn't find it on the HP website. It provides only exe installers which come with many files of different driver for different operating systems and CPU architecutres.

  Otherwise, I was going to install a copy of vanilla Windows 7 32 bit to the HP system, but when the Windows Installer starts, he says that it is impossible to find the necessary drivers, but it does not say what he needs!

  Any help and suggestions would be greatly aprecaited.

  Hello:

  No driver is required to install Windows Vista or Windows 7 on a HP Elite 8200 desktop computer business.

  You use a real MS W7 x 86 installation disc, or the one you burned the ISO file download yourself?

  If you get the DVD, then you have one of two problems...

  1. you do not have the complete file download, even if it says "Download complete" (check the size of the file on your DVD against the size of the Digital River file when you start the download).

  2. you do not burn the ISO at the slowest possible speed that you have leading to the PC with the DVD playback problems.

  If you continue to have problems installing via DVD, use the installation of USB flash (you need a 4 GB flash drive) by following the instructions below:

  Download the MS of W7 USB installation tool and read the instructions on the page to use.

  http://www.microsoftstore.com/store/msstore/HTML/p bPage.Help_Win7_usbdvd_dwnTool

  You may also make this mod as I did if the flash tool-error.

  Download the bootsect file form http://www.everettsporting.com/bootsect.zip

  You will need to go into Control Panel, select display large icons, go to the icon of folder options, view tab, and select the hidden files and folders option.

  Once downloaded, copy the BootSect.exe file in the same folder that contains the file of Windows7-USB-DVD-Download - Tool.exe installed. This file in Windows 7's default installation directory is C:\Users\USERNAME\AppData\Local\Apps\Windows 7 USB DVD Download Tool\

  Run the application from the Windows 7 USB/DVD download tool as described on the Microsoft Store website. The end result will give you a boot USB flash drive that contains everything you need to install the 64 bit version of Windows 7.

  Paul

• How to get a windows Vista Home Premium 32-bit installation disc?

  My computer is an emachine T5086.  It has Windows Vista Home Premium and when loading drivers they stop loading at "windows32 drivers/crcdisk sys. I don't know what that means.

  Then, the computer restarts and asks me to install my windows installation disc for repairs.  F8 on reboot is not available as an option.  I don't have a repair option I turn on the computer and hold down the F8 key manually.  I don't have a windows disk or recovery disk and I can't to where I can find a restore either point.

  How to make a windows Vista Home Premium 32-bit installation disk?  I have my product key. Or where can I get one?

  Hello

  There are different methods to reinstall Vista.

  There is no Windows Vista downloads available from Microsoft.

  You can contact the manufacturer of your computer, eMachines and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  http://www.eMachines.com/EC/en/us/content/home

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• Use the 64-bit installation program dedicated on 64-bit windows editions

  I get the error message when you install specific applications, I checked the game in compatibility mode: Windows XP (Service Pack 2) - I use Windows Vista Home Premium 64-bit Edition.

  The message is: "exhaust all dedicated 64-bit on windows 64-bit edition.

  Can anyone help.

  Maurguitarz

  I get the error message when you install specific applications, I checked the game in compatibility mode: Windows XP (Service Pack 2) - I use Windows Vista Home Premium 64-bit Edition.

  The message is: "exhaust all dedicated 64-bit on windows 64-bit edition.

  Can anyone help.

  Maurguitarz

  Hey Maurguitarz

  link below contains information about 32-bit installation on vista 64-bit

  and the 32-bit drivers do not work on vista 64-bit

  http://Windows.Microsoft.com/en-us/Windows-Vista/32-bit-and-64-bit-Windows-frequently-asked-questions

  How to use compatibility mode

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  and vista Compatibility Center to see what is compatible with vista

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/

  Walter, the time zone traveller

• Wireless Laser Mouse 5000 Windows 7 64-bit installation challenge

  Wireless Laser Mouse 5000 Windows 7 64-bit installation challenge continues to get customer assistance contact support when you try to load the software to control the mouse buttons and the speed of response.

  Suggestions?

  Hi OrlandoM,

  Using the latest 64-bit drivers? Visit the Microsoft Hardware site and download the latest 64-bit driver software:

  http://www.Microsoft.com/hardware/download/download.aspx?category=MK

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Desktop Experience: Web:http://www.winuser.co.uk;  Web: http://xphelpandsupport.mvps.org;  Web: http://vistasupport.mvps.org;  Web: http://www.silversurfer-guide.com

• Updated Windows kb3087916 [August] installs the DEBUG version of the Flash ActiveX in IE11 on 8.1 Windows systems (32-bit).

  Kb3087916 Windows Update [August] installs the DEBUG version of the Flash ActiveX in IE11 on 8.1 Windows systems (32 bit).  This version generates ActionScript errors.

  It may (or may not) do under other configurations (e.g. 64-bit?  Windows 10?) -I don't know.

  Uninstallation of the update is NOT the solution: Tit Windows Update itself must be fixed!

  The problem has been resolved by the release of kb3089023

  https://support.Microsoft.com/en-us/KB/3089023

  If you run Windows updates, it should find it now.

• This installer does not support installation on a Windows 64-bit operating system

  This installer does not support installation on a Windows 64-bit operating system

  Click on the below link and then expand area first elements 13

  Then download the 64-bit Installer Setup file

  https://helpx.Adobe.com/premiere-elements/KB/premiere-elements-downloads.html

  Name of the file:

  64 bit

  Download (1.8 GB)

• Installation of Oracle Client 32-bit on Windows 64-bit

  Hello

  I am trying to install the Oracle 32-bit (version 11.2.0) client on a Windows 64-bit server (Microsoft Windows Server 2008 R2 Standard, Service Pack 1).

  It is my understanding that this is supported and should work. However, the Oracle 64-bit (version 11.2.0) client is already installed on the server.

  We need the 32-bit client from an older application requires it.

  The GUI for the installation of the client starts very well - but when step "Finish Installation" MISTLETOE evacuated all of a sudden. The installation log file ends

  with

  INFO: Setting the value for the variable INSTALL_TYPE

  INFO: Variable "INSTALL_TYPE" wird auf "InstantClient' aufgefuhrt. Der Wert wurde von der Befehlszeile restaurants.

  INFO: addition of the variable oracle_install_NoMigration to table command line args

  INFO: addition of the variable oracle_install_RACInstall to table command line args

  INFO: addition of the variable oracle_install_WindowsSystemDirectory to table command line args

  INFO: update of the State of STATE_INIT_SESSION computer

  INFO: Create and initialize the Interface of Session handler

  INFO: PrepareForInstallOperations to call OiicInstallAPISession

  NEWS: Execution of the iterator until the summary

  INFO: Initialisieren of the Installationsbestands

  INFO: Einrichten of the Installationsbestands

  I am running as a local administrator installation - I tried installing with setting the compatibility mode to Windows 2000. No success at all the :-(

  Am I wrong that the 32-bit client ths is certified with this version of windows? Does anyone have experience with the same situation?

  Any help will be appreciated!

  Rgds

  Jan

  
  

  Do you use separate ORACLE_BASE directories?

  Oracle & reg; Database

  HTH
  Srini