Jerky scrolling and lag in ncurse (CC)

Similar Questions

• Safari hangs and lags while watching the video on youtube

  While watching therapy Unbox videos, the video hangs and lags. What's weird, is that only Unbox GAL of video therapy and I have not had this problem with any other channel. Confused! Help!?

  Try a reboot.

  Make a backup using Time Machine or a cloning program, to ensure that data files can be recovered. Two backups are better than one.

  Try to set up another admin user account to see if the same problem persists. If back to my Mac is enabled in system preferences, the guest account will not work. The intention is to see if it is specific to an account or a system wide problem. This account can be deleted later.

  Isolate a problem by using a different user account

  If the problem is still there, try to start safe mode using your usual account.  Disconnect all devices except those necessary for the test. Shut down the computer and then put it up after a 10 second wait. Immediately after hearing the startup chime, hold down the SHIFT key and continue to hold it until the gray Apple icon and a progress bar appear. Startup is considerably slower than normal. This will reset some caches, forces a check for directory and disables all start-up and connection, among other things. When you restart normally, the initial restart may be slower than normal. If the system is operating normally, there may be 3rd party applications that pose a problem. Try to delete/disable the third-party applications after a reboot using the UN-Installer. For each disable/remove, you need to restart if you do them all at once.

  Safe mode - on El Capitan

  Start Mode without failure-El Capitan.

• HP ENVY 17 Notebook PC K1H57EA: Auto-scrolling and disable tapping

  

  I have installedsynaptics 19.4.2 recently with upadte recent windows driver. I have problem with auto-scroll and pointer of freezing. Whenever I open the file or browser that it scrolled down and the mouse pointer from a few time blocks .the freezed the mouse pointer can be made mobile after pressing a key. Whenver, I made the changes in the sense of Samart, the changes remain by default when I check next time. He has not saved. I rarely notice teas problem when I use the jury of the sequence. I couldn't believe it. I have reset my windows also. Why pointer frozen after a key? What is the reason for the auto scroll? Help me please get back on this. Thanks in advance.

  Hello

  Try the following.

  First, download the Synaptics driver on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp72001-72500/sp72142.exe

  When done, turn off your wireless card (should be f12 ).

  Open Control Panel, open programs and features, right click on the Synaptics driver and select uninstall.

  When finished, restart the laptop.

  When windows rebooted, open your download folder and re-run the installer of Synaptics - when it is finished, restart the laptop.

  If this has fixed the problem of scrolling, turn your wireless card and use the utility on the following link to prevent Windows 10 to update automatically the Synaptics driver.

  https://support.Microsoft.com/en-GB/KB/3073930

  Kind regards

  DP - K

• IM playing final fantasy 8 on pc and using my xbox controller but in the game that the cursor just keeps scrolling and don't know what can not please help

  IM playing final fantasy 8 on pc and using my xbox controller but in the game that the cursor just keeps scrolling and don't know what can not please help

  Hello

  Xbox articles:

  http://forums.Xbox.com/xbox_forums/b/default.aspx

   

  For more information:

   

  Contact Xbox support:

  http://support.Xbox.com/en-us/

   

  Xbox LIVE Support:

  http://support.Xbox.com/en-us/Xbox-Live/browse?XR=shellnav

   

  Games for Windows LIVE errors:

  http://support.Xbox.com/en-us/Games/PC-games/games-for-Windows-errors-messages

   

  Management of the Windows Live ID:

  http://supportuat.Xbox.com/en-us/pages/Xbox-Live/how-to/Xbox-Live-account-management/manage-Live-ID.aspx

• Scrolling and keyboard have a delay of perhaps 1 or 2 seconds.

  Scrolling and keyboard have a delay of perhaps 1 or 2 seconds.  I will type a Word and it does not appear for a second or two.

  I put the mouse to the default settings, but it did not help.

  original title: scrolling and keyboard

  Hello Bowers,

  It seems that your mouse settings and keyboard must be adjusted... Here's how:

  Keyboard settings:

  1. Click Start
  2. Click on devices and printers
  3. Select the keyboard icon and right-click on it
  4. Click keyboard settings & high travel slide 3/4 way on the short side... the Middle at the end of the quick slide... and the background set to "a" point past to halfway walking fast branch & click ok

  The mouse settings:

  1. Go to step 1 and 2
  2. Select mouse icon and right-click on it
  3. Click on the mouse settings
  4. at tab Butts & push the slide to fast
  5. Click on the pointer options & drag the pointer speed for fast & fix the box below
  6. fix the box "Hide pointer while typing", (make sure keep him off)
  7. Click the wheel tab & click on "The following number of lines" set to 3 & lower the value 3 and click ok...

  Please reply & click 'Yes' If this was helpful or 'Reply' if it worked!

  Or what,

  Click on this link: http://www.scanwith.com/Autoruns_download.htm download & install it. (It is a secure reliable software). You can keep it for future use if you choose.
  1. After the download is complete, select autoruns & right click on it
  2. Click on "extract here".
  3. Click on "autoruns" application on the extracted files, select it & right click and click"Open or run"& click OK or Yes if the process of ptompted by an administrator to complete the installation.
  4. When that is complete, Open or run "autoruns"
  5. in the opened window, click 'all'.
  6. on all programs that said "'file not found" select each & every of them, click on one at a time... "
  7. Right-click & click delete & OK.

• Lately when I use the mouse the words text scrolling and copy on top of itself a million times. This happens when I am on line reading something to say on the MSN homepage.

  Lately when I use the mouse the words text scrolling and copy on top of itself a million times. This happens when I am on line reading something to say on the MSN homepage. Sometimes I can click off on the side and separates the text and I can read it but when I use the scroll of the mouse or even the scroll bar on the sideit happens again and again.

  Hi Jaynebasye,

  1. This only happens when you are on the MSN Web site?

  2. did you of recent changes on the system?

  Method 1:

  You can try to change the scroll settings and check.

  For more information, see the following article

  Change the settings of the mouse

  Method 2:

  Step 1:

  You can also check if the problem occurs in safe mode with network.

  Startup options (including safe mode)

  Start your computer in safe mode

  Step 2:

  If you do not experience the problem in safe mode with network, then perform a clean boot.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Note: Make sure that you put the computer to a Normal startup once you are finished.

  Hope this information is useful.

• Problem with wheel scrolling and buttons on Microsoft mouse optical basic v2.0 in Vista

  Hello recently, I logged on to my computer and found out that my laser mouse does not shine by the sensor and the pointer didn't budge when I moved the mouse wheel works only the buttons and scroll

  Why what happened?

  wheel scrolling and buttons on my mouse works nothing else don't

  EDIT: im using a basic v2.0 mouse Microsoft Optical

  Nope it na no:(mais c'est correct, je pense que c'est un problème matériel et j'ai acheté une nouvelle souris qui fonctionne très bien)

  but thanks for your help when even :) as I'm not sure how this forum works, but I think a mod should close this question

• Advice needed to display scrolling and dynamic resizing of containers

  I ran a few samples of cascades, and implemented a few stunts / C++ demo apps.

  Now, I would like to have a configuration like this:

  Page
   Page Container
    Scroll View
     Container #1 with a Label
      (Container #1 has another label, but not shown)
     Container #2 with some other Control
      (Container #2 has another Control hidden)
     ...And so on
  

  The goal is similar to a line of list view that grows off to reveal more content when you press on, but I don't want to use lists, I have only controls and each is unique.

  Are there examples of code similar to this?

  If not, what view to scroll and container API should look in to make this possible?

  You can simply use the visible on any element qml property if you want to hide and display items. Manipulate the tap on the #1 container, and then view the additional content. Put it all inside a scrollview.

• Two fingers to scroll and Pinch to Zoom do not work

  Hello. I bought a brand new HP 4-1115dx this morning, and the two fingers to scroll/sleeve to zoom stopped working completely after 15 minutes of use.

  I have twice now uninstalled the driver and re installed from site Web from HP, currently using v16.2.17.0 latest (available for my device).  I went into the settings of the Clickpad, provided two fingers to scroll and pinch to zoom are both checked and entered in the settings/transmission for each of these items and provided all the appropriate scroll options would be checked.  I also watched the synaptics on the toolbar icon, and 'disable gestures' is NOT checked.

  When I turned on the computer for the first time, twofinger scroll and pinch to zoom in when selected by default and "scrolling" (which is a right mouse pad finger scrolling was NOT selected by default.  15 minutes after turning on the new device, I ticked 'scrolling' to see if I liked the right side of the touchpad scrolling better.  I have since failed to get the two fingers to scroll / pinch to zoom out (I've several times switched on / two fingers to scroll and the a finger right side touchpad "scroll".)

  Help, please!  This isn't the end of the world for me, but a feature that does not work after 15 of owning a product makes me nervous for other features do not down the road!

  Thank you

  Steve

  Steve1234321,

  It could be a problem with the synaptic software.

  Go to control panel and uninstall the synaptic program.

  Start-> Control Panel Type-> uninstaller-> right click and uninstall synaptic.

  If you restart, go ahead.

  Now lift the Recovery Manager

  Go to start-> type of recovery

  You should see the Recovery Manager in the list

  Open the Recovery Manager, and then click on software and driver re install

  Go through the list and find synaptic and reinstall.

  It is said synaptic driver, but the program is with the driver.

  By clicking on the White Star congratulations on the left is a way of saying thanks!

  I would like to know how everything goes.

  Nice day.

• Problem of scrolling and visibility

  I have the following screen layout:

  

  The rectangle of trees, has a senior who displays the date and other things. The third rectangle box, has a manager that displays a menu. In the middle there is a manager that displays my application itself. I have a class that inherits from the screen that defines this provision.

  One of my screens is subclass of my main class and a list of fields 'tailor-made' appears in the middle Manager. The problem here is when I scroll down after the last field, it is not "fully". I think that at screen, was posted, but as a Manager in the last part I I can't. 3 managers have no scroll indicator. If I wan't scrollable content in the way Manager, I add a new vertical Manager with scrolling, and it works, except for the display of the full field.

  

  In the picture above, I hope to show what the problem is. For example, if my field has any matching text at the bottom of the field itself and I did scroll down, this text is hidden by the menu Manager. How can I force the field to show entirely?

  Try again with organizing your screen in the following format:

      public TestScreen()
      {
          super(NO_VERTICAL_SCROLL);        
  
          HorizontalFieldManager topManager = new HorizontalFieldManager();
          HorizontalFieldManager menuManager = new HorizontalFieldManager();
  
          int topManagerHeight = topManager.getPreferredHeight();
          int menuManagerHeight = topManager.getPreferredHeight();
  
          final int usedHeight = topManagerHeight + menuManagerHeight;
          VerticalFieldManager contentManager = new VerticalFieldManager(Manager.VERTICAL_SCROLL | Manager.VERTICAL_SCROLLBAR)
          {
              protected void sublayout( int maxWidth, int maxHeight )
              {
                  int width = Display.getWidth();
                  int height = Display.getHeight() - usedHeight;
                  super.sublayout( width, height);
                  setExtent( width, height);
              }
          };
  }
  

  Concerning

  Bika

• Audio film blackBerry Smartphones BlackBerry Torch and lag synchronization problems

  Anyone has this problem where after some time watching a movie the audio appears trolling out and synchronization of his lips is the way out. The image also appears to stutter and lag? Any who have the same problem and or know to remedy this? The files work fine on my mac, but when on the Blackberry, they have this problem. Its quite annoying, so anyone with a fix or a solution that had the same issues please let me know how I can sort. Thank you very much

  Hi RADIKAL69

  If you watch a movie, I would recommend ensuring that no other application works (apart from the basic such as Messages, home, telephone, BBM and browser apps).  You can do this by pressing the menu button to see what applications are running and enter each of them to close in now the back button, or by pressing Menu > close/exit.  In addition, for best performance, disable all network connections.

  If the BlackBerry is your film treatment and trying to deal with other tasks in the background, this could cause some lag in the audio synchronization.

  Thank you

• I have a problem with scrolling and typing on the computer.

  Original title: I have problems with scrolling and typinging after a minute or so without the computer trying to go in the background, any help would be great because I will to throw the mouse across the screen very soon

  as noted above, totally tired, I must right click of mouse to wake up on this page, I did it while typing grrrr big time. Help pleeeease

  Hello

  Thanks for posting your question in the Microsoft community.

  I see that you have a hard time to work with the mouse.

  1. What is the brand and model of the mouse?
  2. The problem occurs on any program or when you perform a task in a particular program?

  Try these steps and see if that solves the problem of performance of your mouse.

  Method 1:

  You can check that the mouse buttons are set correct.

  Refer to the section "Change how the mouse buttons works", from following link to learn more about the same:

  Change the settings of the mouse

  http://Windows.Microsoft.com/en-us/Windows7/change-mouse-settings

  Method 2:

  You can uninstall and reinstall the drivers for the mouse on your computer, to do so follow the steps mentioned below.

  a. click Start, click Control Panel , and then click Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  b. in the Device Manager, look for the device under the mouse and other pointing devicesand then double-click the device name.
  c. click on the Driver tab, and then click uninstall the driver.

  d. restart the computer and it will automatically re - install the drivers of.

  Note:

  You can also update mouse drivers by visiting the manufacturer's Web site.

  See this link for more information:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Let us know if you need help on this question or any question about Windows.

• Worm 16.09.20 document is automatically closed after the scroll and zoom text output but the application is running

  IPad 2 (IOS 9.3.5), Adobe, 16.09.20, Document version is slowed after the scroll and zoom text output and then automatically closed, it jumps to the main menu, but application is running (in multitasking mode). This behavior was not in the previous version. I tried to reinstall the IOS on IPad, but no change.

  Thanks for any help

  Hi jakubh25891777,

  Acrobat Reader 16.09.21 is now available in the App Store.

  It should solve the frequent accidents that you have experienced.

  Please try it and let us know if it works for you.

  We apologize for the inconvenience.

• a vertical scrolling page to page is reloading - when I click on the menu, it scrolls, and then reload the page. boring

  I created a page a Web site with vertical scrolling and anchor points.  When I click on the menu item, it scrolls, and then reload the page.  How can I stop this action?   I want just a smooth roll to anchor and do not reload each time.

  TIA

  This is not normal. Sounds like something that is triggered by the custom code added to the HTML page or by a third party widget, but it's totally impossible to say without the URL of the page.

• Is it possible to have the Parallax scrolling and changing slide show? (so the slideshow still looks and looks you scroll your top content once again)

  Is it possible to have the Parallax scrolling and changing slide show? (so the slideshow still looks and looks you scroll your top content once again)

  You can apply the opacity to images or defining a key position for slide show as well as with the page highlight opacity changes and will bring similar effect.

  Thank you

  Sanjit