Journal of VPN connections

Similar Questions

• VPN connections disappear, RASDIAL makes reappear

  Here is a screenshot of the connect to a network dialog box. Notice that my VPN connection is not displayed. Nothing shows the:

  http://i44.Tinypic.com/2iu3rpg.jpg

  In order to get the dialog box to regain his senses, I drop simply to an elevated command prompt and run

  rasdial [name of the VPN connection]
  You don't need credentials. You don't need it to sucessfully connect; You just push with a stick rasdial:

  http://I39.Tinypic.com/16bdd2u.jpg

  The connect to a network dialog box now works:

  http://i40.Tinypic.com/qpqd6h.jpg

  You can see screenshots of Windows Vista. I saw this bug on Windows XP.

  My question is: How can I get Microsoft repaired?

  Hi Jack,

  Well, Gack! If it happens only every several weeks to months, it will be very fun in the not so fun sort of way to track down.

  Here is my point of view.

  First of all, on a side note, I would never, ever use Windows without an antivirus package, if you go on the internet at all, which you seem to do.

  'Common sense' has worked well before the age of the car by possible viruses. Just go for a page (even supposed to known good) can give you an infection. I'm not saying it's likely, all easily possible.

  I highly recommend that you run some virus scans (these forums have several good suggestions) just to be sure, but it doesn't sound like you have a virus to me.

  Well, I'll get off my soap box now. :-)

  Then, restart is a standard "fix." If this solves the problem, then virtually all support guys in the world are going to tell you, "there is difficulty, have a nice day." I won't argue your point well, it is wrong. Just please realize that there are literally billions of combinations possible, hardware and software. There is no way that each of them could possibly work together without problem. I'll just tell you that it is a workaround and you should use if it works.

  Finally, if you want to keep looking for a better solution, I am with you on that. Solutions help all of us.

  So, here's what you can do then.

  When it happens the next time, mark the time.

  Then go into the event viewer and begin to track down any errors at the time, that happened as well as the warnings and all the events that went past just before the problem started. We don't need (or want) the full thing, just the header with the name of event ID, source, journal, and level.

  You should know what happens if anything started, stopped or tried to run or tried to brake.

  Any service which is of what precedes.

  Also, I'm looking more on Technet.

  Since you said that you work, so for now, I'd mark this thread as closed and start again when and if the problem happens again.

  Of course, I hope this helps!

  Matt Hudson
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Monitoring VPN connection attempts

  I would like to be able to use the syslog messages that are detached from the ASA to monitor VPN connection attempts (successful or not). Looking at the posts system there are several codes that relate to this.

  I wonder if anyone has a good way to use syslog to do this? There are some codes that can be used for this information?

  Thank you.

  You can set the ASA to send syslog messages when the user connects and disconnects. There are a few types of 'remote access' as IPsec VPN, webvpn / without client anyconnect/ssl vpn client that you can follow.

  If you are using Clientless SSL VPN syslogs usually begin with 716xxx.  For example the syslog for connect is 716001 and disconnect is 716002.  There is a list of other Clientless VPN SSL related messages here. You can view the specific contents of each journal here:

  http://www.Cisco.com/en/us/docs/security/ASA/asa80/system/message/logmsg

  http://www.Cisco.com/en/us/docs/security/ASA/asa80/system/message/logmsgs.html#wp4776913

  If you use SSL VPN Client (SVC1.x, AnyConnect 2.x) syslogs usually begin with 722xxx. For example, the syslog for connect is 722022 and disconnect is 722023. There is a list of other customer VPN SSL related posts here

  http://www.Cisco.com/en/us/docs/security/ASA/asa80/system/message/logmsg

  http://www.Cisco.com/en/us/docs/security/ASA/asa80/system/message/logmsgs.html#wp4778697

  If you use the IPSec VPN client, you can follow a success to connect with 713119 (indicates the phase 1 completed), 713049 (indicates the complete Phase2) and disconnect with 113019. There is a syslog ipsec additional 713049 that you can follow for ipsec.

  http://www.Cisco.com/en/us/docs/security/ASA/asa80/system/message/logmsgs.html#wp4775678

  http://www.Cisco.com/en/us/docs/security/ASA/asa80/system/message/logmsgs.html#wp4775412 http://www.Cisco.com/en/US/docs/Security/ASA/asa80/System/message/logmsg

  http://www.Cisco.com/en/us/docs/security/ASA/asa80/system/message/logmsgs.html#wp4769539

  Here are some other notes to keep in mind:

  -You can tell that the logging levels you currently have on the command line ASA with 'show log '.

  -Newspapers that you send to a syslog server are controlled with the commands "Logging Trap". For example 'logging trap information' (level 6) or "trap alerts logging" (level 1)

  -You can tell what level of severity (i.e., alerts, critical, errors, warnings, notifications, informational, debug) each one connects through this link. As you can see by checking the link, those follow-up sign in or out as I've mentioned above are usually information (sev 6)):

  http://www.Cisco.com/en/us/docs/security/ASA/asa80/system/message/logsev

  http://www.Cisco.com/en/us/docs/security/ASA/asa80/system/message/logsevp.html

  -If you want to create a specific subset of the syslogs to send to a specific device, you can do it with a class or a list of logging:

  http://www.Cisco.com/en/us/docs/security/ASA/asa80/configuration/guide/m

  For example (class log):

  http://www.Cisco.com/en/us/docs/security/ASA/asa80/configuration/guide/m

  http://www.Cisco.com/en/us/docs/security/ASA/asa80/configuration/guide/monitor.html#wp1065253

  class check vpnc informational FRT

  For example (list of logging):

  http://www.Cisco.com/en/us/docs/security/ASA/asa80/configuration/guide/monitor.html#wp1065512

  log list mylist message 722022

  log list mylist message 722023

  logging trap mylist

  Don't forget to evaluate the positions that helped you and to mark it as resolved if you question has been answered.

  -heather

• Impossible to establish a VPN connection with a router configured as a Cisco server using client VPN 5.0.00.0340

  Hei guys,.

  Please help me on this one because I'm stuck enough on her...

  I am trying to connect to a Cisco 3700 router configured as a VPN server by using a VPN client and the VPN connection does not settle.

  This is an extract from the log:

  130 12:48:30.585 07/01/11 Sev = Info/5 IKE / 0 x 63000001
  Peer supports XAUTH
  131 12:48:30.585 07/01/11 Sev = WARNING/3 IKE/0xE3000057
  The HASH payload received cannot be verified
  132 12:48:30.600 07/01/11 Sev = WARNING/2 IKE/0xE300007E
  Failed the hash check... may be configured with password invalid group.
  133 12:48:30.600 07/01/11 Sev = WARNING/2 IKE/0xE300009B
  Impossible to authenticate peers (Navigator: 904)
  134 12:48:30.600 07/01/11 Sev = Info/4 IKE / 0 x 63000013
  SEND to > ISAKMP OAK INFO (NOTIFY: INVALID_HASH_INFO) for 200.100.50.173

  I enclose the whole journal extract... The message "BOLD" is quite obvious, you mean, but I'm 100% sure, in the login entry, I typed correctly the group password: pass

  My topology is very basic, as I am setting this up only to get a clue of the operation of the Cisco VPN. It is built in GNS3:
  -2 3700 routers: one of them holds the configuration of the VPN server and the other would be the ISP through which the remote worker would try to establish a VPN connection. I am also attaching the configuration file for the router configured as a VPN router.

  Behind the second router there is a virtual XP machine on which I have installed VPN client...

  My connection entry in the customer is to have the following parameters:
  Host: 200.100.50.173 , //which is the IP address of the VPNServer
  Authentication-> authentication-> name group: grup1 password: pass / / I'm quite positive that I typed the correct password... even if the log messages are linked to a misidentification.

  I use public addresses only, because I noticed there is a question about behind the NAT VPN connections and is not not very familiar to the NAT.

  Another aspect which can be of any importance is that "allow Tunneling of Transport" in the tab Transport to the input connection is disabled

  and the VPNServer router logs the following error message when you try to establish the connection:

  * 01:08:47.147 Mar 1: % CRYPTO-6-IKMP_NOT_ENCRYPTED: IKE 200.100.50.34 package was not encrypted and it should have been.
  * 01:08:47.151 Mar 1: % CRYPTO-6-IKMP_NOT_ENCRYPTED: IKE 200.100.50.34 package was not encrypted and it should have been.
  

  You have no idea why I can't connect? Y at - it something wrong with my configuration of VPN server... or with the connection entry in the VPN client?

  Thank you

  Iulia

  Depending on the configuration of the router, the group name is grup1 and the password is baby.

  You also lack the ipsec processing game that you would need to apply to the dynamic map.

  Here is an example configuration for your reference:

  http://www.Cisco.com/en/us/Tech/tk583/TK372/technologies_configuration_example09186a0080235197.shtml

  Hope that helps.

• Internet VPN connection disconnects

  Good afternoon

  I have the Cisco VPN Client and several established connections. When I connect to them I have connected either to the VPN, I can access the network and their teams. But I have a problem on one of the connections and is well connected to the VPN, connect you to servers and other things, but I block internet access to the computer. It is the only link that happens to me.

  The thing is that the internet really works, otherwise it would remain active VPN connection doesn't let me server.

  I noticed in the log and when I try to access that the internet does not connect and the journal starts a loop that reads:

  728 12:59:59.978 25/04/13 Sev = Info/5 IKE / 0 x 63000040

  DPD ACK from xxx.xxx.xxx.xxx, seq # receipt = 2818950532, seq # expected = 2818950532

  729 13:00:09.963 25/04/13 Sev = Info/6 IKE / 0 x 63000055

  Sent a keepalive on the IPSec Security Association

  730 13:00:10.463 25/04/13 Sev = Info/4 IKE / 0 x 63000013

  SEND to > ISAKMP OAK INFO * (HASH, NOTIFY: DPD_REQUEST) to xxx.xxx.xxx.xxx

  731 13:00:10.463 25/04/13 Sev = Info/6 IKE/0x6300003D

  Request DPD shipment at xxx.xxx.xxx.xxx, our seq # = 2818950533

  732 13:00:10.503 25/04/13 Sev = Info/5 IKE/0x6300002F

  Received packet of ISAKMP: peer = xxx.xxx.xxx.xxx

  733 13:00:10.503 25/04/13 Sev = Info/4 IKE / 0 x 63000014

  RECEIVING< isakmp="" oak="" info="" *(hash,="" notify:dpd_ack)="" from="">

  734 13:00:10.503 25/04/13 Sev = Info/5 IKE / 0 x 63000040

  DPD ACK from xxx.xxx.xxx.xxx, seq # receipt = 2818950533, seq # expected = 2818950533

  735 13:00:19.977 25/04/13 Sev = Info/6 IKE / 0 x 63000055

  Sent a keepalive on the IPSec Security Association

  736 13:00:20.978 25/04/13 Sev = Info/4 IKE / 0 x 63000013

  SEND to > ISAKMP OAK INFO * (HASH, NOTIFY: DPD_REQUEST) to xxx.xxx.xxx.xxx

  737 13:00:20.978 25/04/13 Sev = Info/6 IKE/0x6300003D

  Request DPD shipment at xxx.xxx.xxx.xxx, our seq # = 2818950534

  738 13:00:25.986 25/04/13 Sev = Info/4 IKE / 0 x 63000013

  SEND to > ISAKMP OAK INFO * (HASH, NOTIFY: DPD_REQUEST) to xxx.xxx.xxx.xxx

  739 13:00:25.986 25/04/13 Sev = Info/6 IKE/0x6300003D

  Request DPD shipment at xxx.xxx.xxx.xxx, our seq # = 2818950535

  740 13:00:29.991 25/04/13 Sev = Info/6 IKE / 0 x 63000055

  Sent a keepalive on the IPSec Security Association

  ..............

  2422 14:20:31.267 25/04/13 Sev = Info/6 IKE/0x6300003D

  Request DPD shipment a.yyy, our seq # = 2261259166

  2423 14:20:31.297 25/04/13 Sev = Info/5 IKE/0x6300002F

  Received packet of ISAKMP: peer = .yyy

  2424 14:20:31.297 25/04/13 Sev = Info/4 IKE / 0 x 63000014

  RECEIVING< isakmp="" oak="" info="" *(hash,="" notify:dpd_ack)="" from="">

  2425 14:20:31.297 25/04/13 Sev = Info/5 IKE / 0 x 63000040

  From DPD ACK.yyy, seq # receipt = 2261259166, seq # expected = 2261259166

  2426 14:20:41.782 25/04/13 Sev = Info/4 IKE / 0 x 63000013

  SEND to > ISAKMP OAK INFO * (HASH, NOTIFY: DPD_REQUEST) a.yyy

  2427 14:20:41.782 25/04/13 Sev = Info/6 IKE/0x6300003D

  Request DPD shipment a.yyy, our seq # = 2261259167

  2428 14:20:41.812 25/04/13 Sev = Info/5 IKE/0x6300002F

  Received packet of ISAKMP: peer = .yyy

  2429 14:20:41.812 25/04/13 Sev = Info/4 IKE / 0 x 63000014

  RECEIVING< isakmp="" oak="" info="" *(hash,="" notify:dpd_ack)="" from="">

  2430 14:20:41.812 25/04/13 Sev = Info/5 IKE / 0 x 63000040

  From DPD ACK.yyy, seq # receipt = 2261259167, seq # expected = 2261259167

  2431 14:20:52.299 25/04/13 Sev = Info/4 IKE / 0 x 63000013

  SEND to > ISAKMP OAK INFO * (HASH, NOTIFY: DPD_REQUEST) a.yyy

  2432 14:20:52.299 25/04/13 Sev = Info/6 IKE/0x6300003D

  Request DPD shipment a.yyy, our seq # = 2261259168

  2433 14:20:52.329 25/04/13 Sev = Info/5 IKE/0x6300002F

  Received packet of ISAKMP: peer = .yyy

  2434 14:20:52.329 25/04/13 Sev = Info/4 IKE / 0 x 63000014

  RECEIVING< isakmp="" oak="" info="" *(hash,="" notify:dpd_ack)="" from="" yyy.yyy.yyy.yyy="" isakmp="" oak="" info="" *(hash,="" notify:dpd_ack)="" from="">

  2435 14:20:52.329 25/04/13 Sev = Info/5 IKE / 0 x 63000040

  From DPD ACK.yyy, seq # receipt = 2261259168, seq # expected = 2261259168

  2436 14:21:02.811 25/04/13 Sev = Info/4 IKE / 0 x 63000013

  SEND to > ISAKMP OAK INFO * (HASH, NOTIFY: DPD_REQUEST) a.yyy

  2437 14:21:02.814 25/04/13 Sev = Info/6 IKE/0x6300003D

  Request DPD shipment a.yyy, our seq # = 2261259169

  ..............

  4807 16:03:35.041 25/04/13 Sev = Info/6 IKE/0x6300003D

  Request DPD shipment a.yyy, our seq # = 2261259640

  4808 16:03:35.071 25/04/13 Sev = Info/5 IKE/0x6300002F

  Received packet of ISAKMP: peer = .yyy

  4809 16:03:35.071 25/04/13 Sev = Info/4 IKE / 0 x 63000014

  RECEIVING< isakmp="" oak="" info="" *(hash,="" notify:dpd_ack)="" from="">

  4810 16:03:35.071 25/04/13 Sev = Info/5 IKE / 0 x 63000040

  From DPD ACK.yyy, seq # receipt = 2261259640, seq # expected = 2261259640

  4811 16:03:45.537 25/04/13 Sev = Info/4 IKE / 0 x 63000013

  SEND to > ISAKMP OAK INFO * (HASH, NOTIFY: DPD_REQUEST) a.yyy

  4812 16:03:45.537 25/04/13 Sev = Info/6 IKE/0x6300003D

  Request DPD shipment a.yyy, our seq # = 2261259641

  4813 16:03:45.567 25/04/13 Sev = Info/5 IKE/0x6300002F

  Received packet of ISAKMP: peer = .yyy

  4814 16:03:45.567 25/04/13 Sev = Info/4 IKE / 0 x 63000014

  RECEIVING< isakmp="" oak="" info="" *(hash,="" notify:dpd_ack)="" from="">

  4815 16:03:45.567 25/04/13 Sev = Info/5 IKE / 0 x 63000040

  From DPD ACK.yyy, seq # receipt = 2261259641, seq # expected = 2261259641

  And forever... I tried to contact the technicians have the VPN server, but it is said that everything is correct and that it's something on my network.

  I have on my network I have no firewall between the two, or the router.

  When I log in, I get an Ip address, for example:

  IP: 192168118105

  Mask: 255.255.252.0

  Default gateway: 192.168.116.1.

  But I can't even ping the gateway! Also gives me a DNS set:

  -192.168.24.170

  -192.168.24.171

  But I get the DNS either!

  It also gives me as a primary WINS server

  -10.6.1.92

  And as a child:

  -10.168.100.92

  Anyway, the idea is to connect to the internet through the computer on which the VPN, the VPN, then remote desktop connection to connect through a test server. But then, when I connect to the cuts VPN had my office remotely via internet!

  I spoke with them several times since my network I see NOTHING unusual, indeed, none of the other connections gives me problems, just that.

  Another thing I noticed is that the status option-> statistics-> details of the itinerary, routes secured me give the IP 0.0.0.0 and other VPN connections give me some Ip address...

  I also checked the possibility of IPSec over UDP (NAT / PAT)...

  Any idea which could be at fault?

  Thanks in advance, Bye!

  Hi David,

  You mentioned "one other thing I noticed, is that the status option-> statistics-> details of the route, as Secured routes gives me the IP 0.0.0.0 and other VPN connections give me an IP... "This means that there is no split tunneling configured on the VPN server. "Details of the route section defines the destinations that you will be able to access the VPN and it is pushed by the VPN server.

  So, if you see 0.0.0.0 in the section above, all the traffic from your computer, on the VPN server, including internet traffic tunnel. Two possibilities:

  -C' is the expected flow, should work if the VPN server required the config to route internet traffic.

  "- If not and you use only the VPN to access to certain resources and the internet should still work locally, in this case end of VPN server config must be modified split tunnel configuration so that it instead of pushing ' 0.0.0.0 ' route sends a route as"x.x.x.x"where"x.x.x.x"is the resource behind the VPN tunnel. In this way, the internet works locally.

  Whatever it is, it's a matter of end of VPN server config.

  Simple explanation of the split tunneling:

  http://en.Wikipedia.org/wiki/Split_tunneling

  HTH.

  -

  Sourav

• Add a vpn connection in ios 10, method chosen in IKEv2, but I don't have the remote ID. My VPN is created in Sonicwall

  Add a vpn connection in ios 10, method chosen in IKEv2, but I don't have the remote ID. My VPN is created in Sonicwall, waiting for quick reply

  Hi cmscan,

  Thank you for using communities of Apple Support.

  I see that you add a VPN connection using IKEv2, but you do not have the remote ID. I know it's important to be able to set up a virtual private network, you can connect using your iPhone. I'm happy to help you with this.

  You must contact your system administrator to ensure that the settings that you must configure the VPN connection. Please see the iPhone user Guide for more information.

  Have a great day!

• VPN connection error - pppd limited

  Hi I think I have a problem with OX, the captain and the networks, I sail perfectly with the team but since update stops running the VPN, I tried the possibility to go to recovery mode to 'disable csrutil' then ' sudo chmod u + s / usr / sbin / pppd "but it does not work when you use Netextender or FortiClient." I have another Mac with Lion and works properly the only difference I notice in the file 'pppd' Captain makes me 'limited, compressed' and only 'compressed' Lion I put a photo and a newspaper of netextender:

  15/09/2016 10:15:59.271 [603 General info] NetExtender 8.1.788 for Mac OS X initialized

  15/09/2016 path of the bundle app NetExtender 10:15:59.299 [General info 603] = /Applications/NetExtender.app

  15/09/2016 createLogPanel() 10:16:01.045 [gui info 603]

  15/09/2016 10:16:01.730 [config info 603] loading saved profiles...

  15/09/2016 10:16:16.507 [connect info 603] user: "prueba".

  15/09/2016 10:16:16.507 [connect info 603] domain: "abcd.hos."

  15/09/2016 10:16:16.509 [connect info 603] Server: 'vpn.abcd.es:444 '.

  15/09/2016 10:16:16.581 [603 general notice] connection to vpn.abcd.es:444...

  15/09/2016 10:16:16.820 [General error 603] ERROR: SSL_connect: Undefined error: 0 (0)

  15/09/2016 10:16:16.821 [General notice 603] retry...

  15/09/2016 10:16:16.822 [General error 603] ERROR: SSL_connect: Undefined error: 0 (0)

  15/09/2016 10:16:16.823 [General error 603] authentication failed: connection failed. See the log for more details.

  15/09/2016 10:16:16.823 [General error 603] NetExtender connection failed.

  15/09/2016 10:16:16.823 [General notice 603] SSL VPN disconnect...

  15/09/2016 10:16:17.058 [General error 603] ERROR: SSL_connect: Undefined error: 0 (0)

  15/09/2016 10:16:17.058 [General notice 603] retry...

  15/09/2016 10:16:17.060 [General error 603] ERROR: SSL_connect: Undefined error: 0 (0)

  15/09/2016 10:16:17.061 [General error 603] disconnect command failed

  15/09/2016 10:16:17.063 [General notice 603] SSL VPN connection is completed.

  15/09/2016 10:16:17.063 [config info 603] loading saved profiles...

  15/09/2016 10:16:17.065 [gui info 603] connection failed. See the log for more details.

  

  I think that the problem is a network file or because I put the wrong password and I cannot detect this error. as I said the VPN working properly with another MAC using the same network.

  Help...

  You shouldn't be messing with the security features of the operating system.

  Problems may have to do with the network, or client software that you use.

  I start by making sure all the software are updated and then create a new entry, vpn, double control system that everything has been entered correctly.

  FWIW, I use the built-in features of VPN on El Capitan to connect to my University regularly and without problem.

  I'm not familiar with "Fortinet", and I suspect that you may need to be updated, or simply use the built-in VPN.

• Mac OS El Capitan cannot share a VPN connection that is type of IKEv2

  I have a few VPN connections, I share via Wi - Fi on my mobile device. Here's what I do:

  I have a Macbook Pro with Ethernet port, I have some work VPN connections (some type of IPSec, some IKEv2). First I plug the cable to the Ethernet port, then I start a VPN (settings-> network-> Connect) connection, finally, I share the VPN (settings-> sharing-> Internet sharing) via Wi - Fi connection so that my mobile device can connect and use the VPN connection.

  This work really well for me with IPSec VPN connections. But today, I tried to switch to an IKEv2 VPN connection, the VPN works well, but I can't share it on a mobile device via Wi - Fi, because I couldn't see the connection in the list "share your connection from" (Preferences-> sharing-> Internet sharing system)

  Are there any technical problem that IKEv2 cannot be shared? Or is there that all parameters must be made so that all VPN connections must appear in the list to share?

  evpn https://support.purevpn.com/IKEv2-Configuration-Guide-for-OS-x-El-Capitan-by-pur

• VPN connection: An unexpected error has occurred.

  I am suddenly unable to get my built-in VPN connection works on my iMac with OS X 10.11.5.  I get the VPN connection message: an unexpected error has occurred.  I have been using this VPN configuration to connect to work for several months with success.

  But last week (and I do not know if it had nothing to do with it), I went on vacation and used a free wi - fi setup of Tim Hortons.  I had a LOT of trouble getting the next login page, and I checked all playing with different settings of network without success.  When a change did not work, I put it to its original setting.  Finally, I learned to use Safari to access the free WiFi connection page of Tim.  Then once connected, everything was OK.

  But when I returned a week later and if necessary, to start my VPN connection to access the work, it wouldn't start.  I checked and recheck all my settings preferably of different network, but did not find those who were wrong.  I even deleted and re-entered my VPN service definition without solving the problem.

  Thinking that the problem could be the newly installed ISP of Bell equipment (we went from Rogers while I was away), I used my BlackBerry smartphone (issued by my employer) to create a wi - fi hotspot and accessed to the internet using this connection which completely ignored my home ISP equipment.  But still, I was unable to establish a VPN connection.

  I then tried my iPad VPN connection, and it worked!  Then, I defined a VPN service on the iMac to my wife and the iMac to my daughter and was able to successfully establish a VPN connection to my work very well, using exactly the same VPN configuration.  This led me to the conclusion, it was a problem on my iMac (and not with my new ISP or VPN system of my work that had none of the changes you made), but I still can't find what is "broken".  I run Onyx for my iMac OS X 10.11.5 and repaired permissions and clean the cache and all the rest she is doing to "solve" problems.  But the problem persisted.

  Is there a preference file corrupted somewhere (scan option is no longer on the current version of the Onyx for a reason any)?

  I still have a network setting wrong somewhere I need to go back to the system is correct value?

  Here is the attempt to VPN from the file system.log (with some hidden values in the case where they display my work VPN access):

  26 June at 16:13:48 Myrons-iMac nesessionmanager [439]: NESMLegacySession [VPN works: 295091E5-xxxx-4B6A-xxxx-F7A7xxxxxxAA]: received an order to start SystemUIServer [257]

  26 June at 16:13:48 Myrons-iMac nesessionmanager [439]: NESMLegacySession [VPN works: 295091E5-xxxx-4B6A-xxxx-F7A7xxxxxxAA]: changed to connecting status

  26 June at 16:13:48 Myrons-iMac nesessionmanager [439]: IPSec connection to server nnn.nnn.n.n

  26 June at 16:13:48 Myrons-iMac nesessionmanager [439]: phase 1 of the IPSec from.

  26 June at 16:13:48 Myrons-iMac raccoon [520]: agreed to the takeover of vpn connection.

  26 June at 16:13:48 - last message repeated 1 time-

  26 June at 16:13:48 Myrons-iMac raccoon [520]: IPSec connection to server nnn.nnn.n.n

  26 June at 16:13:48 - last message repeated 1 time-

  26 June at 16:13:48 Myrons-iMac raccoon [520]: connection.

  26 June at 16:13:48 Myrons-iMac raccoon [520]: IPSec Phase 1 started (initiated by me).

  26 June at 16:13:48 - last message repeated 1 time-

  26 June at 16:13:48 Myrons-iMac raccoon [520]: bind 1 (cannot assign requested address)

  26 June at 16:13:48 - last message repeated 1 time-

  26 June at 16:13:48 Myrons-iMac raccoon [520]: sendfromto failed

  26 June at 16:13:48 - last message repeated 1 time-

  26 June at 16:13:48 Myrons-iMac raccoon [520]: Phase 1 negotiation failed due to the error of sending. 94437eb7d5b1b6e8:0000000000000000

  26 June at 16:13:48 - last message repeated 1 time-

  26 June at 16:13:48 Myrons-iMac raccoon [520]: can not send packets

  26 June at 16:13:48 - last message repeated 1 time-

  26 June at 16:13:48 Myrons-iMac raccoon [520]: IKE Packet: send failed. (Initiator, aggressive Mode 1 Message).

  26 June at 16:13:48 Myrons-iMac nesessionmanager [439]: Controller IPSec: IKE FAILED. Phase 1, assert 0

  26 June at 16:13:48 Myrons-iMac nesessionmanager [439]: NESMLegacySession [VPN works: 295091E5-xxxx-4B6A-xxxx-F7A7xxxxxxAA]: status changed by disconnecting

  26 June at 16:13:48 Myrons-iMac nesessionmanager [439]: IPSec disconnection from the server 142.201.5.6

  26 June at 16:13:48 Myrons-iMac raccoon [520]: IPSec disconnection from the server nnn.nnn.n.n

  26 June at 16:13:48 - last message repeated 3 times-

  26 June at 16:13:48 Myrons-iMac nesessionmanager [439]: NESMLegacySession [VPN works: 295091E5-xxxx-4B6A-xxxx-F7A7xxxxxxAA]: status changed to offline, terminus right no

  Any help or insight would be more useful and appreciated... so that I can work from home again.

  Thank you

  Myron VanderLaan

  I finally found my VPN problem.

  There is a 'racoon' file that is generated when I connect to the VPN to my work site.

  I have created a modified version of this file so that my connection does not expire in 3600 seconds (changed in 24 hours).

  Apparently, there are some slightly different settings (such as certain IP addresses other than VPN IP of my work) in this file under our new ISP Bell from the former FAI Rogers.

  And if I connect to the WiFi Hotspot from my BlackBerry, it does not once again because these settings in the file are different again.  I must return the file generated instead of my modified file.

  Bad luck!

• How to set the VPN connection in Windows 7 64 bit?

  Hello

  How can I set up a Vpn connection in Windows 7 x 64 bit.

  Thank you.

  Hello

  Go to the network control panel and Internet-network sharing Center.

  http://www.windows7hacker.com/index.php/2009/08/how-to-set-up-a-VPN-connection-in-Windows-7/

  Note that you need to know the login and the password to access the Internet :)

• Is it possible to get Win 7 auto start VPN connection?

  Hey all,.

  Is it possible to get Windows 7 auto start VPN connection? Or can you recommend a 3rd party VPN client application?

  Thank you

  Hello

  You can make a batch file exe or cmd and autostart. The command line should be like this:

  RASPHONE d * where is * a name of your VPN connection

  For example: your Vpn connection is called my VPN

  The command line will be:

  RASPHONE d my VPN

• Setting up VPN connection.

  How to configure the VPN connection so that doctors may be able to work remotely from home or anywhere on the server of PACS in hospital.

  Hello

  Your question is beyond the scope of these forums.

  Please post this question in the Technet forums.

  Windows client | Deploy, manage, desktop, 7, Vista, XP | TechNet:
  http://TechNet.Microsoft.com/en-us/Windows/cc468658.aspx

  Concerning

• VPN connection question

  In my workplace, there are two networks is the local LAN that connect other computers to the internet and the wireless network which my computer connect to and is directly to the internet, my question is that is it possible to connect to the LAN over the internet using the connection V P N if yes how? Please help me because whenever I want to read my emails, I have to put the UTP cable which will be sometimes annoying.
  Please indicate all the measures that are needed to establish the VPN connection.

  Ask it professionals about your place of work.  They know what is possible and what is not.

  Where I work, there is an available VPN that allows connections to the LAN from outside work.  If I use a laptop computer provided by the company, access the LAN just as if I'm at work.  If I use my PC, I get a link that allows me to access a limited number of resources, such as the email of the company.  I can, however, DRC to my desktop at work PC and can get access to the local network.

• How can I connect to my server (which runs on windows server 2008 rc2) via IP REAL using rdp, while the VPN connection is active?

  Hello

  How can I connect to my sServer (which runs on windows server 2008 rc2) via IP REAL using rdp, while the VPN connection is active?
  

  Hello Marie Smith.

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the link below.

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads/

  Hope this information helps.

• I am trying to create a VPN connection, but when I get to the step that allows me to create the VPN, the radial buttons are greyed out.

  I am trying to create a VPN connection, but when I get to the step that allows me to create the VPN, the radial buttons are grayed out, it is a Windows component is missing and does not allow me to create VPN. I am running Windows XP Home addition. I recently got a Malware attack and had the quarantine and fix trojen attempts. After the restoration, I found that my previous VPN connection was broken. When I tried to add a new connection, I'm stuck on the screen connection virtual network in the the radial button private network connection wizard is grayed out, he could not check.

  Hello

  Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Windows XP TechNet forum. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en/itproxpsp/threads