[JS] Item number NUMBERED_LIST Recovery

Similar Questions

• OSP item number

  Hi all

  What is the OSP item number?

  Which table we retrieve the column.

  Thank you

  Hello

  Suite SQL will provide you with items in the BCP.

  Thank you

  PS.

  SELECT

  *

  Of

  mtl_system_items_b

  WHERE

  outside_operation_flag = 'Y '.

• Item number of update

  How can I update the number of point? I want to precede the number with a '0' element. I tried to update item_number and segment1 mtl_system_items_interface table and ran import it items. But the item number is not updated. something else must be defined?
  
  Thank you.

  As a general rule, you should avoid updating the number of point. This is because there are a few tables in Oracle where number (unfortunately) the element is copied when the data is created. This goes against the concept of definition of element once and then using the item anywhere id elsewhere.

  If you need to update the article, you can either use the display groups to delete to delete the existing item and create a new.
  If it does not (due to constraints of deletion), you can temporarily change the INV: profile name option editable point; modify the item and return to no.

  Hope this helps
  Sandeep Gandhi
  OMKAR Technologies Inc.
  Techno-Functional consultant

  PS: Point Interface will not help.

  Published by: Sandeep Gandhi, independent Consultant on April 30, 2010 13:12

• For model number 4446 recovery disk

  Should what number I call to buy a recovery disk for a laptop of Lenovo Windows Vista 4446 model number?

  You can create recovery discs (use a key theater or rescue & restore) or call 1-877-4lenovo (1-877-453-6686) for the u.s.a.

• Model number:-n010TX: recovery of windows media 8

  Mr President.

  I had my HP laptop pavilion in November 2013. It came with 8 pre-installed windows. I upgraded Windows 8.1 by March, 2014 and it worked fine for a few weeks, after which, the laptop has detected a hardware failure. I had a HP technician install a pirated windows 8 on my pc and it also gave me a series of DVDs of recovery for windows 8 to be used on a HP or compaq PC.

  It is a set of 3 DVDs 'system recovery' and 1 DVD "valorization of the pilot. The problem starts when I insert the first DVD of system recovery. He didn't autolay not. I checked with control panel and made sure that the "Use AutoPlay for all media and devices" option is checked. But autopsies shows two options: -.

  1 open the folder to view the files, and

  2. don't do anything.

  Now, on the DVD it says: "insert the disk and follow the instructions on the screen. But there is no on-screen instructions.

  I opened the folder and it contains a lot of files with names that I don't understand. Please let me know how I can get the DVD to play automatically.

  Thank you

  Hello

  If I understand correctly, you want to restore the recovery DVDs with you, if so, please go through the link for recovery from recovery disks (Windows 8) below.

  http://support.HP.com/us-en/document/c03489643

  I am an employee of HP, the views expressed here are my personal opinions, not HP.
  Make it easier for others to find solutions, marking my answer "Accept as Solution" if it solves your problem.
  Click the "Thumbs up" button to the left side of my post to say thank you! ***

• Item number: 2022295 context menus are shortened when more than 15 files are selected__

  Ok.  2022295 says he's got the solution for this.  I have Windows 7 Edition home premium.  I go to the registry editor.  All right until I get in the HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer
  I can get to this place in the registry, but after that I can't do anything because nothing asked: MultipleInvokePromptMinimum
  Help, please.  thnx

  Ok.  2022295 says he's got the solution for this.  I have Windows 7 Edition home premium.  I go to the registry editor.  All right until I get in the HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer
  I can get to this place in the registry, but after that I can't do anything because nothing asked: MultipleInvokePromptMinimum
  Help, please.  thnx

  Hello

  You must create this registry entry.

  Press the button of the Windows Logo + R to bring up the run dialog box.

  In the type of line open: regedit.exe , and then press OK.

  In the registry, navigate to:

  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer

  With the selected Explorer key, in the right window, right-click and select

  New/DWORD (32-bit) Value.

  Name the new value MultipleInvokePromptMinimum (respect for case-sensitive and no space)

  The new value of the right click and select Edit.

  In the Section of Base, select decimal.

  In the value data box, type the number that you want to use. (16 will make the unlimited number of files selected)

  Click OK.

  Exit the registry editor.

  You will need to disconnect / connect to see the change.

  WARNING: Serious problems can occur if you modify the registry incorrectly by using the registry editor or by using another method. These problems may require that you reinstall the operating system. Microsoft cannot guarantee that these problems can be solved. Modify the registry at your own risk. SeeHow to back up the registry

  I hope this helps.

  Thank you for using Windows 7

  Ronnie Vernon MVP

• Perpetual license / serial number and recovery of hard drive crashed again hard drive.

  my serial number was rejected to the activation test

  Hello

  Please see on the lower thread for help:

  Trying to install Acrobat Pro XI, but get a message invalid serial No.

  I hope that answers your query!

• Item number: 933779: an instant copy of a storage group backup fails and event IDS are logged in the application log in Exchange Server 2003

  Regarding the Article ID: 933779, after copying the system and logs in a backup location, and restart the server.  Place the files in the folder before doing a backup full?

  Help please.

  Hello

  For assistance on this issue, you can post your question in the Technet Forums.

  http://social.technet.Microsoft.com/forums/en-us/categories/

• Item number: 314481 how to manually remove programs from the add tool / remove program does not work! What's next?

  Tried to uninstall a program using the Add / Remove program.  The tool has requested a copy of 'Install the CD' I did not.  Then I tried to uninstall the program by following the instructions in the Article ID: 314481 how to manually remove programs from the add tool / remove program.  It didn't not t work!  The name of the program calmed listed in the tool of installed programs list even if the "Delete" button is no longer visible.   The registry key and its subkeys appear to have been deleted but still the program name in the list of installed programs tool.  WHAT IS PLANNED?

  Some people have good results with the free copy of Revo Uninstaller that you can get from here:

  http://www.revouninstaller.com/index.html

• Correct the item number for micro table SX10 (CTS-QSC20-MIC / MIC-CTS-TABL20) >

  Hello

  table microphone said SX10 data sheet part: CTS-MIC-TABL20

  but it's out of stock everywhere online and checked my distributor for me with cisco and said to the CTS-QSC20-MIC order.

  Is it the same? will it work?

  Thank you!

  They are the same numbers of micro, "Cisco Telepresence 20 micro précision", part just different.

• because no known reason adobe insisted he did not now, I did not recognize my password, I connected through giving my cell phone number and receipt of text with a number of recovery well until I noticed an unknown number of mobile within the message (4477

  LOOK AT THE MESSAGE TO ROY WALTERS, IF YOU HAVE A SIMILAR EXPERIENCE, TRY ADOBE SAY!, IF YOU CAN TELL THE WORLD HOW. R.K.W.

  Hello

  Please see account Adobe ID and login troubleshooting

  Hope that helps!

  Kind regards

  Sheena

• Vista recovery disk does not work

  my recovery for a6057c disk will not work after that I used the NeoSmart
  recovery disk.

  After logon to Vista I see that empty office, I can access the task
  Manager by CTRL - ALT_DEL.manager.

  Windows and all my files are on drive D and my C is the drive has nothing on this subject now. I'd do it
  I just want to make a disaster Recovery and
  all over again with new factory. Does anyone have any ideas?

  I now remove the prtition C on my drive.

  Vista still labels the d drive, I have no C?

  I found the answer on the Microsoft Knowledge Base.

  Item number: 947288 primary partition drive letter designation is lost when you use WinRE to repair a GPT in Windows volume

  The article is also for Vista.

  Article ID: 223188 How to restore the drive letter of the system / boot in Windows

  Would do the same thing.

  I took the article to use regedit to swap my C & D return records.

  Now windows Vista starts OK. (All I had before was just an empty office).

  I also received my HP Factory disaster recovery disks it looks they will work if I need.

• DV 6 factory reset with HP recovery disk

  Hello
  I did a clean install of win7 because I didn't have a HP recovery disk and known a lot of driver problems... When I finally orderd one recovery disc from HP to make it back to factory State, windows does not recognize the recovery disc, since the 'HP recovery manager' by default was deleted... and when you press F11 at startup, the screen just says "F11... the system recovery" on the lower left corner and stay like that forever.

  Is what I can do to reset it to the factory?
  Thank you!
  -------------
  Model number: dv6-6146tx
  64 bit
  Win7 home premium

  You are the very welcome.

  I don't know what the question might be, unfortunately.

  What was the problem with the installation of W7?

  Normally, if well done, your laptop will work much better on a simplified version of W7 with all the bloatware that comes on the original image.

  I contact HP and make them aware of the number of recovery disc and in the meantime, try the clean install of W7.

  Install the drivers, it is like building a House.  You start with the Foundation and work your way upward.

  The Foundation 3 drivers must be installed in a specific order, and you reboot after each installation.

  If you do not, your installation will be unstable not unlike a House if you put the walls first and then decided to dig the basement.

  The first pilot, you always need to install is the Intel chipset installation utility.  Who installs the drivers for the motherboard.

  You restart when you are prompted.

  The second driver you install is the graphics driver.  Your model has the AMD/Intel switchable graphics, so the only graphics driver, that you install the AMD graphics driver that installs the drivers for the AMD graphics cards and Intel.   NEVER install the Intel graphics driver or allow HP or windows update to install an updated the Intel graphics driver.  Then you REB oot.

  The third driver you install is the audio driver and restarted.

  Then comes the wired network adapter.

  Then, you can install everything in any order you want.  You will probably want to install the driver for the wireless card then.

  Download the drivers from another PC and use a USB flash drive to install the first 4 on your laptop if you keep the correct order of installation for these important factors.

  If you're stuck trying to find a specific driver, display the ID of the hardware for it.

  Use this method to find the hardware ID.

  I used the for example wireless card, because most people have trouble knowing what model of wireless card they have.

  Go to Device Manager.

  There should be a category showing other devices .

  Less than one catergory other devices should be a list of devices that need drivers.

  They will have little things! marks next to them.

  The wireless network card is the device below the category other devices like a network controller.

   

  Click the network controller device, and it will open a window with tabs at the top of the window.

  Click the Details tab.

  On the Details tab, you will see a drop-down list of property.  It will be a default Description of the appliance.

  On this list and select the second item which is the hardware ID

  Now you should see 4 lines or more characters and the top row begins with PCI\VEN.

  After this first string.

  That tells the user the manufacturer and the type of device that it is.

• ACS 4.2 Reimage failed: 1 recovery when THE RECOVERY CD

  Cisco Secure ACS: 4.2.0.124

  The application management software: 4.2.0.124
  --------------------------------------
  Recovery device ACS options

  [1] reset the administrator account
  [2] restore CD disk image
  [3] quit and restart

  Enter the menu item number: [2]

  This operation will completely erase the hard drive.
  Press on 'Y' or 'y' to confirm, any other key to cancel: y

  Please wait while the image Cisco Secure ACS is restored.
  This may take several minutes...

  Reimage failed: 1

  Can someone help me? I can't get my ACS.

  Thank you

  
  Cisco Secure ACS: 4.2.0.124
  Appliance Management Software: 4.2.0.124
  
          --------------------------------------
  
          Acs Appliance Recovery Options
  [1] Reset administrator account
  
            [2] Restore hard disk image from CD
  
            [3] Exit and reboot
  Enter menu item number: [2]
  This operation will completely erase the hard drive.
  
          Press 'Y' or 'y' to confirm, any other key to cancel:y
  Please wait while Cisco Secure ACS image is restored.
  
          This might take several minutes ..
  Reimage failed: 1
  Can anybody help me ? i can't recover my ACS.
  Thanks
  

  Hello

  Just check the cd is bootable and should have all the relevant image for ACS 4.2 files.

  HTH

  Ganesh.H

• Satellite P850-F315 - RECOVERY ISSUES

  Hello

  I bought a laptop Toshiba Satellite P850-F315.

  After that I did a factory reset (now "zero" all by pressing the button "power on"), I noticed that I had driver problems on my USB ports.
  I have found workarounds and kept the operation of the machine.

  This morning the wireless card stops working and so did the bluetooth device (it is, of course, in addition to the USB ports that were never resolved).

  The machine won't let me not re-install the drivers for those devices.
  I tried a system restore Windows, which did not help.
  So I came back to perform a factory reset Toshiba.

  + It is underway. +

  Here are my questions.
  When I performed the first factory reset, it was the problem of the USB to start.
  When I tried to re - install the USB drivers, they seem to be "locked" while signed in as a user.
  I could only install devices on USB ports, when I was in safe mode.
  Why would this happen?

  Secondly, I have another identical machine, which is currently works perfectly.
  This problem will be repeated if I do a factory reset on the second machine?

  Is there a reason why wireless and bluetooth devices may stop working randomly?
  The wireless hardware seems to be detected by the system, but I can't install the software or device drivers. When I go in the settings of the wireless card and select a Protocol, the properties button is "grayed out" which means I can't go into the properties of each protocol. On the bluetooth device, it freezes while loading software at 15%.

  It just seems like there are too many random questions on a single machine. I hope someone can help me with a simple solution for all problems.

  Hello

  The whole story is really strange and I can't imagine what the problem is here. Fact is this recovery image original Toshiba is always created for some portable model and contains the operating system, all necessary drivers for hardware components, specific tools and Toshiba Utilities and some additional software.

  Toshiba recovery image contains drivers tested so I m really confused why you had all of these problems.
  At first, my advice to you is to create using recovery disc (DVD) preinstalled creator Toshiba recovery disc. After doing this using this drive for the functionality of recovery by image installation and test once more.
  > I have another identical machine, which is currently works perfectly.
  Googling around, I found that your computer has the PSPKBF part number. If this machine another has the same part number create recovery disk and use it on the original machine just to see if the same problem happens again.
  > This problem repeated itself, if I do a factory reset on the second machine?
  I understand the reason for this question, but recovery image can be installed to 1000 times and the result must be the same. I installed recovery image on multiple machines, and each time the reset settings has been successfully and without any strange problems.

  Believe me it is not easy to help you with all these problems. Recovery image is tested and after recovery image installation, everything should be ok.
  Please do what I wrote and do some tests.

  Send comments.