Jump the cursor into the Acer laptop.

Similar Questions

• jump my cursor on my Acer laptop

  My cursor on my Acer laptop Vista jumps around when I type.  He's good enough to stay in the right place if I use 1 finger HELP it is making me CRAZY!

  First thing I would try is updating the driver for it.

  Start-> Type "Device Manager"-> mouse & other pointing devices
  Right click on the touchpad-> update software of the driver

• Cursor/mouse frozen in the Acer laptop

  Original title: FROZEN CURSOR/MOUSE

  I have windows 7 a acer lab top.my cursor/mouse froze please, what can I do?

  Hi Mary,

  1 have you ever done any recent hardware or exchange of software on your computer before the show?

  2 - is a built-in touchpad and external mouse?

  I suggest you follow the methods and mark the question below:

  Method 1:

   

  You need perform a clean boot to prevent any third party conflicting application from interfering with your computer.

  To put the computer in a clean boot State, you must follow the steps in the article mentioned below and check with the question.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: You must follow step 7 of the article mentioned above to recover your computer to a Normal startup after you complete all the steps.

  Method 2:

  Mouse, touchpad and keyboard with Windows problems:

  http://Windows.Microsoft.com/is-is/Windows/help/Mouse-touchpad-and-keyboard-problems-in-Windows

   

   

  I hope this helps.

• Need help to replace my DVD burner in the Acer laptop

  Hello

  I have a laptop Acer (TravelMate 5720) running in very good condition I bought about 7 years back!

  However, the motor in the DVD player does not now - he is gone and must be replaced by a new DVD burner.

  When I checked on eBay to buy a new DVD burner for this model, there are 2 types sold either IDE (PATA) and SATA DVD burners. I don't know which of those above my laptop supports.

  I checked the properties of the CD drive in my computer and it says "hl-dt-st dvdram gsa-t40n ata device.

  How will I know which of the 2 above that you buy... ??

  Kindly help me. Let me know in case additional specifications are necessary on this you.

  -Mr. Abed

  You must remove the unit from your laptop. You will immediately see if it has an IDE or a SATA connector. See Wikipedia so not sure what these connectors look like.

• Cannot communicate with the Acer laptop

  My mouse is dead (Yes, I changed the battery).  I disabled the touchpad in order to use the mouse.  Now, I have no way to communicate with my computer.  I saw the following instructions to help, but I'm completely unable to communicate with my computer.  Can someone tell me what to do?  I surely would appreciate any information.

  Susan Young

  My mouse is dead (Yes, I changed the battery).  I disabled the touchpad in order to use the mouse.  Now, I have no way to communicate with my computer.  I saw the following instructions to help, but I'm completely unable to communicate with my computer.  Can someone tell me what to do?  I surely would appreciate any information.

  Susan Young

  Hi Susan

  How do you disable the Touchpad?

  You can always navigate in Windows using the keyboard.

  Example: If you have disabled the Touchpad in Control Panel / mouse settings.

  Press Windows key + R to display the Run dialog box.

  Type Control.exe, and then press ENTER. This will open the control panel.

  Start by pressing the Tab key until the point of the mouse is highlighted, and then press ENTER.

  In the properties of the mouse:

  Press the Tab key until you highlight the element you want to change.

  If you need to select another tab at the top of the dialog box, press the Tab key until the first tab is selected, and then use the arrow keys to select another tab. When you have the appropriate tab selected, press ENTER.

  If this does not work for you, you may need to get a USB mouse. This should work as soon as plug you it into the system.

  Let us know if you have any other questions.

  Concerning

• Lexmark wireless printer connects to the Acer laptop.

  My printer lexmark series 400 and Motorolla phone Wireless will not connect to my laptop w/mic adapter to Acer4520,

  can someone advise?

  What happens when you try? Lexmark support say?

• IrDA driver for Windows 7 on Acer laptop to be able to load the data from UWATEC Aladin Prime dive computer down

  I have a new Acer laptop with Windows 7.

  I have a new UWATEC Aladin Prime dive computer.

  I have instaled the SmartTRAK on the Acer softewair.

  I bought what I believe is an IrDA that plugs into the USB port says that it complies with RoHS standards. Notice on back indicates S/N: 090701165.

  I have been looking for a driver for the IrDA or find you a driver or if it'll work on the Acer laptop.

  I have technology obsolet?

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Problems connecting an older Acer laptop with Windows XP using a dlink router

  I recently bought a new router dlink (N 300 Router wireless) and installed on my Dell desktop computer that is running Windows 7 Home Premium, desktop as well as my Sony Vaio laptop which runs the same OS connects fine to the internet. When I try to connect to the Acer laptop it does not connect to the internet, when I try to 'Fix' the wireless connection, he says he can't fix it. It allows to connect very well with older dlink router but I had to replace it, the new router says it's compatible with Windows XP. Does anyone else have this problem?

  Hi Bluemoongal,

  If you try to connect the Windows XP laptop to the wireless router, follow the steps described in this document...

• Acer laptop factory Recovery Windows 7 Home Premium

  I restored an Acer laptop to factory settings. Of course he has an old IE on it, which seems to be unable to connect to the Internet.

  Is it possible to download an install of IE on a flash drive on another computer and then install it on the computer laptop and will work?

  Or is there a better solution I need?

  OF

  I would like to download an installation file another browser (Firefox, Google Chrome) on another machine, then install it on the Acer laptop.

• My cursor jumps to the right and cannot use it for games. Have the Toshiba laptop and Windows Vista Edition using Home Premium pack 2

  my jumps to cursor to the right of the page and will move for me when you play as Bejewelled. Have laptop Toshiba and use Windows Vista Premium Pack 2.

  Hello
  You did recently change?
  It is while you use other applications?
   
  I suggest that you update touchpad and display drivers for the cards and check.
  1. open Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. in Device Manager, locate the touchpad, and then double-click the device name.
  3. click Driver tab, then click on set to update driver and follow the instructions.
  4. now Locate Display Adapter and then double-click the device name.
  5. click Driver tab, then click on set to update driver and follow the instructions.

  Now, try to follow the link provided to update a hardware driver that is not working properly and check the question below.
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
   
  You can also change the touchpad settings and check.
  To do this:
  1. click on start
  2. click on Control Panel
  3. Select mouse and then check the settings
   
   
  Thank you, and in what concerns:
  Swati Keni-Microsoft Support

• I have an acer laptop about a year ago, I put a username and password, but now that I want to use again, I forgot the password. How can I reset it so that I can get into my laptop?

  I have an acer laptop about a year ago, I put a username and password, but now that I want to use again, I forgot the password. How can I reset it so that I can get into my laptop?

  Happy that he sorted out for you. Thank you for taking the time to let me know. MS - MVP - Elephant Boy computers - don't panic!

• Ms more recent update for my VISTA plus old (2008 Acer laptop) was the last event, now cannot start PC... recovery tests without success... Help, please...

  Ms more recent update for my VISTA plus old (2008 Acer laptop) was the last event, now cannot start PC... try to recovery without success, a loop back and asking to recover or normal boot...  Attached to jumps, safe to ask if I want to recover...  I never received an OEM of VISTA version, but the first time having problem after all these years...   Help, please...  Would contribute to a boot disk, if so, how can I get a copy?...  Thanks, Dave * address email is removed from the privacy *

  Hello

  See if that helps you.

  Do a Safe Mode system restore to before the problem started.

  http://bertk.MVPs.org/html/restoresysv.html

  How to access Safe Mode

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If it doesn't, try a startup repair and / or a system restore using a DVD of Vista from Microsoft

  Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

  Here is the guide to repair Options using a Vista DVD from Microsoft.

  If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  Table of contents

  1. Overview of Windows Vista repair options
  2. How to perform an automatic repair of Windows Vista using Startup Repair
  3. Advanced Tools Overview
  4. Conclusion

  If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

  Unfortunately, you have to buy it.

  Here is a link to it:

  http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And here's how to use Recovery of Acer.

  http://Acer.custhelp.com/app/answers/detail/A_ID/2631

  To start the system recovery:

  1. Restart the computer.
  2. When the Acer logo appears on the screen, press the left Alt and F10 keys.
  3. If you are prompted with a Microsoft Windows splash screen, press the Enter key.
  4. After that the Acer eRecovery Management application is loaded, select your type of restore.
  5. Read the review and then click Next when you are ready.
  6. Click Next to start the restore process. It may take 10 minutes up to an hour fom anywhere to restore.
  7. Once the restore is complete, your computer will restart. After the reboot it will load Windows and start the installation of your software and drivers. Your computer will restart several times during this process. Once they are all completed, your computer will be like it was when you bought it first.

  See you soon.

• Acer laptop does not start after the blue screen

  After I got a blue screen (flashed by too fast to see the error message) when I try to reboot my acer 5610Z laptop computer with vista home edition, usually nothing happens at all. sometimes windows is trying to run the Startup Repair tool, then crashes and only a cursor flashing at a black screen.  Tried to open the case and clean the Fan & Heatsink heat to air without effect.

  The blue screen came a few days after I started using a new USB mouse, but the fan seemed to get high a few days earlier.

  But I noticed it will make the road to startup repair only if the battery is in, and never if only the power cord is attached.  Also, if I let the computer sit for several days, it is more likely start (even though he never passed from the Startup Repair).

  1. try the system restore.

  2. try to do a startup repair disk.

  3 acer Recovery Options.

  4. contact Acer.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  See you soon.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work, try to make a Bootable ERD to do a Startup Repair:

  As is the case with most computers/laptops these days, they do not come with good Vista disc to repair only the recovery disks.

  As your grave in the category above, download the ISO on the link provided and make a bootdisk of it.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  You can make a tool to restart system, System Restore, etc. with it.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista repair disc.

  You can do a system restart tool, system, etc it restore.

  There is not a disk of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://www.acerpanam.com/Synapse/forms/portal20.cfm?RecordID=853&formid=3390&website=AcerPanAm.com&siteid=7117&words=all&keywords=&areaid=2

  Acer eRecovery made

   

  1. on the Acer splash screen, you can press Alt and F10 (at the same time press F2 to enter the BIOS) to make it appear a version BACK style eRecovery.

  ·        The unit is able to reload Windows from this mode faster then CD.

  ·        The default password is 000000 (6 zeros) and it is shown when you are prompted for the password.

  ·        Users are able to change the password in this mode for eRecovery only.

  ·        The system can retrieve the hidden on the hard disk (partition PQService) image or a CD/DVD media.

  ·        It is possible to reload the factory CD/DVD style or snapshots that creates the eRecovery Windows version.

  2. in Windows, there are 3 ways to access eRecovery functionality.

  ·        Press Alt and F10

  ·        Open Acer eManager and then double-click eRecovery.

  ·        When a system is new it should automatically open this application and invite you to do the recovery media.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://www.Acer.com/worldwide/support/index.htm

  Support &

  See you soon.

  Mick Murphy - Microsoft partner

• How to change the parameters of program on Acer laptop with Vista installed

  * original title - is something wrong with my hardware or is it me? *

  A year ago, I got this acer laptop with windows vista installed. Even when my microsoft word product ran out--I never could find the keycode - my phone still worked well enough, connection to the internet very well, are not slow or anything. I left my laptop at the home of a relative for almost a year and let their (and the other 2 people out there) to use. It worked fine when I come into their home and used - I forgot to bring it home with me - and I recently picked him up two weeks or two it y a. still, it connects to the internet, but I have problems to open all programs other than the control panel (the games, microsoft, Notepad, inkball (, basically everything that was already about this or even downloaded), because it always appears with and 'open with', program that was never on the computer before I reported. And when I try to open the program with its own program or any other thing, it won't work at all. And I can not change the open with screen because I have no idea what to do! Help, please! It's driving me crazy! Thanks to everyone who helps me with a viable answer!

  Thank you!

  Renee Meister

  A year ago, I got this acer laptop with windows vista installed. Even when my microsoft word product ran out--I never could find the keycode - my phone still worked well enough, connection to the internet very well, are not slow or anything. I left my laptop at the home of a relative for almost a year and let their (and the other 2 people out there) to use. It worked fine when I come into their home and used - I forgot to bring it home with me - and I recently picked him up two weeks or two it y a. still, it connects to the internet, but I have problems to open all programs other than the control panel (the games, microsoft, Notepad, inkball (, basically everything that was already about this or even downloaded), because it always appears with and 'open with', program that was never on the computer before I reported. And when I try to open the program with its own program or any other thing, it won't work at all. And I can not change the open with screen because I have no idea what to do! Help, please! It's driving me crazy! Thanks to everyone who helps me with a viable answer!

  Thank you!

  Renee Meister

  http://www.ehow.co.UK/how_5804857_set-file-associations.html

  and

  http://www.vistalessons.com/set_default_programs_vista.htm

• Acer laptop: the desktop icons used open in Windows 10

  The desktop icons will not open in Windows 10.  I get the menu drop-down-directed by the word 'View', but the word 'Open' is nowhere in it!   Please, please, help. Thank you.

  Hello @JoeBuzu,

  Welcome to the HP Forums!

  I read your message of not being able to open applications from the desktop and tried to tender hand for you.

  As it is a problem with your Acer laptop, not an HP product, you want tender hand to Acer support for this issue.

  Thank you for being a part of the community of HP.