just to record keyboard triggers

Similar Questions

• Keyboard triggers - can never overlap on the timeline?

  I have a character that has several keyboard triggers.  I have several forms of mouth, flashing, an animation of eyebrow and 2 pairs of eyes I swap between.

  I thought I could just my animation in a loop and treat each of them individually, but I find that all the triggers of keyboard live within the same layer of the timeline, so if I have an eyebrow movement that overlaps an existing swap of the mouth, mouth swap is replaced by eyebrow movement and they cannot coexist.

  I searched the forums and cannot find any discussion about this, so maybe this problem is unique to my setup, but there is no sense at all to me.

  I'd appreciate it if anyone could share suggestions or ideas because I'm in a difficult situation at the moment.  I was counting on the use of CA for a PSA I work on - and indeed I kept customers waiting for 2 hours now while I tried to solve this problem.

  Thank you

  Paul!

  For now, you need to add multiple keyboard trigger behaviors in the Panel of the puppet. Select your puppet of high level, go to behaviors on the right, click on + and select keyboard trigger. Do this for both separate keyboard triggers you want overlapping and then only one at a time for each arm.

  This will be fixed in the next version, where each trigger keyboard will get its own track in the timeline automatically.

• How you properly structure layers in Illustrator to create character animator keyboard triggers?

  How you properly structure layers in Illustrator to create character animator keyboard triggers? I was able to trigger several layers are displayed, but after the first layer, I lose the ability to control the eyes, eyebrows, etc.  The tutorials have for example Photoshop, but there is none for illustrator.  I work in illustrator and would not have to move around with Photoshop.

  Thank you, Mark.

  When you configure multiple views puppets (that is, by pressing keyboard triggers to switch to profile/quarter views), you need to adapt the behavior of the Face and behavior of lip sync (if do lip sync), the puppet of top level down to the individual view subpuppets. For your work or any other configured in this way, follow these steps:

  1. In the project Panel, select the puppet.
  2. In the properties panel, remove the face and Lip Sync behaviors.
  3. Double-click the puppet to open it in the Panel of the puppet.
  4. Whirlpool open character > subpuppet Chief (in your example) so you can see the layers view subpuppet.
  5. Select all the layers in view subpuppet (in your case, currently, before and on the right side).
  6. Add the behaviors of face and Lip Sync in the add behavior menu ('+ ') in the properties panel. This allows you to adjust the settings on a view-by-view basis.

  Now, that you trigger different views, your facial expressions and speech can still control the character's face.

  It is also covered in this FAQ: FAQ: why my character's mouth does not work at the outbreak of a default (front) view for a puppet multivue?

  I hope this helps.

• Problem with keyboard triggers

  I have a character (head only) set up in Photoshop, everything works as expected until I try to add a second version of the head with keyboard triggers angry.

  When I activate the trigger, the swap of heads, but the new Chief has no eyebrows on caterpillars or movement of the mouth. The head itself is going to scale and rotate, but none of the strokes on the 'traded' head work.

  I compared it to the Wendigo.psd file and cannot determine what exactly I'm doing wrong; everything seems to be done in a similar way.

  Here's what my layer Setup looks like currently. Thanks for any help!

  

  The behavior Face is looking for a head as its base, so we do not currently have a way to replace a different set of secondary face through the key elements of. However, this should be possible by creating separate views (for normal and angry) and having the head structure, it contains, then application face and Lip Sync to eyesight and removing of the top-level puppet puppets. Discover the project examples of character animator (character animator examples) and specifically the puppet of Wendigo in '02. Wendigo scene' to see how it is implemented.

• I have lost my discs for re - install XP home. What is the best thing for me to do? I have the codes ect. Just making records.

  my hard drive crashed and now I'm trying to re instal everything. I don't have the records, just codes. any ideas for me to do re-installed?

  It is a disc that was purchased at the retail store?  If so you can download the trial version of Xp Home on the Microsoft Web site and run the installation, during the instalation when it prompts you to register the product or ask for the key you can enter your key.

  If it is a disk that came with your laptop / PC, also known as the OEM version of the operating system, like HP, DELL, Lenova sends to your laptop, then you will need to contact your computer manufacturer for a recovery disk replacement, which they will send you with other programs and all the drivers for your computer ,

  The recovery disk is usually somewhere between $15 and more depending on your shipping needs.

• Keyboard triggers hide other layers

  Hello

  When I put triggers on keyboard for the character's different hand positions, each triggers hide across the body, for example. When I press the button for different left arm position, I can see that he changed even if the other part of the body disappears (both legs, tools, other image arms and torso). There is no work around for this? Greatly appreciated. Character: Adobe Creative Cloud, project: Adobe Creative Cloud.

  I replied in the other thread, but:

  Everything that is of the same level/group in a file is called a brother. So if you have files at the same level and use the exclamation in PS/intelligence artificial (w!), or the 'hide the siblings' checkbox in the properties of character animation, this is what is happening. If you don't want stuff to disappear, move it out of the group. Many people get a "Right arm" group, for example, and put all their ask right arm in there. This got a bit explained in the last show, about 36 minutes in: https://youtu.be/H4J9tKuibVk?t=36m16s

• Creating a record using triggers

  Flight Recorder user guide says that you can start recording or registration of dump files based on triggers. However, I am not able to find the triggers tab to set a. I try it on the JAVA HotSpot VM. One configured triggers successfully.

  Here's what the user guide says, but I couldn't find anything about triggers in aid

  "Set triggers on the tab page triggers MBean of the Console JRockit Mission Control." For more information about how to create triggers, see the online help in Java Mission Control. »

  Triggers are housed in the JMX Console.

  1. Connect to the console JMX to the JVM for which you want to have a trigger.
  2. Go to the MBeans tab group, and then select the triggers tab.

  I hope this helps!

• pro__intellitype IntelliType Pro does more (error msg) - 64 bit Vista Home. Just installed Microsoft keyboard/mouswe set, laser 6000 - intellitype pro still does not.

  IntelliType pro
  IntelliType pro

  Hi Grosher,

  Welcome to the Microsoft Answers site!

  1. from when are you facing this problem?

  2. is the keyboard and the mouse does not?

  Try the following methods.

  Method 1

  Resynchronize your device with the receiver

  1. Press the button on the receiver and check that the light on the receiver starts flashing.
  2. If a dialog box appears on the screen in seconds, follow the instructions that appear on the screen. Otherwise, continue to the next step.
  3. Press and release the Connect Channel button on the bottom of the mouse or the keyboard.
  4. Check the green light on the receiver. A continuous green light means that the synchronization was successful. If the problem persists, repeat steps 1 to 4.
  5. For the Wireless Notebook Mouse: this issue can occur if the micro-switch on the bottom of the mouse is not released. Use a PIN or pen to try to release the button, if it is pressed.

  Method 2

  un) try different ports

  To determine if the problem is related to the ports on the computer, use only the two cables provided with the wireless desktop receiver or the cable that is provided with a mouse.

  b) USB keyboard and USB mouse

  If the USB cable is connected to a USB hub, disconnect the device from the hub, and then plug it into a USB port on the computer. If your device is already connected to a USB port on the computer, try to connect the device to a different USB port if available.

  c) try the keyboard and the mouse on another computer

  d) change the batteries

  e) to recharge the batteries

   

  Method 3

  Reinsert the batteries or install fresh batteries

  Both the wireless keyboard and the wireless mouse rely on AA alkaline batteries for power. Remove the batteries and then insert them again. If the problem persists, install a new set of batteries in the unit that you have problems with.

  Method 4

  Install the latest version of the software

  If you are troubleshooting a wireless mouse, download and install the latest version of the Microsoft IntelliPoint software. For more information about IntelliPoint software, see the Microsoft Web site at the following address:

  http://www.Microsoft.com/hardware/download/DownloadResult.aspx?category=MK&type=trackball&name=t_to15&OS=WVista_32&lang=en (http://www.microsoft.com/hardware/download/DownloadResult.aspx?category=MK&type=Trackball&name=t_to15&os=WVista_32&lang=en)

  If you are troubleshooting a wireless keyboard, download and install the latest version of the Microsoft IntelliType software. For more information about IntelliType software, visit the Microsoft Web site at the following address:

  http://www.Microsoft.com/hardware/download/DownloadResult.aspx?category=MK&type=trackball&name=t_to15&OS=WVista_32&lang=en

  Method 5

  Manually reinstalling drivers

  To remove and reinstall the drivers, follow these steps:

  1. Disconnect the device from the computer.
  2. Cut the power to the device, if the device has a separate power supply.
  3. Open the Device Manager. To do this, use one of the following methods:
     • In Windows Vista, click on start toreduce this includes this image, type device in the Search box, and then click Device Manager in the programs list. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
     • In Windows XP, click Start, click run, type devmgmt.mscand then click OK.
  4. Double-click keyboard, right-click on the keyboard you are using, and then click Uninstall.

     Note If your device is not listed, this means that the device has been deleted automatically when you disconnected the device. Go to the next step.

  5. Restart the computer.
  6. Once again the power supply, if you have to and then connect the device to the computer. Your computer detects the device and then reinstall the drivers for the device.

  For more information on these methods, you can go through the items listed below

  The Microsoft wireless keyboard or mouse does not work as expected or respond intermittently
  http://support.Microsoft.com/kb/838398

  Microsoft USB wired keyboard is not responding or the types of wrong characters
  http://support.Microsoft.com/kb/258826

  After several weeks of typical use, a Microsoft wireless device may stop responding
  http://support.Microsoft.com/kb/322609

  Hope this has been helpful,

  Kind regards
  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think

• Satellite P205 - hit ANY key on the keyboard opens the default browser

  Very strange problem with our Toshiba Satellite P205.
  Hit ANY key on the keyboard opens the default browser. For example, type a ten letter word ten browser windows opens. We have replaced the keyboard but the problem persists. Toshiba repair center suggested replacing the motherboard at $500 (which isn't on the cost of a new cell phone?).

  Works very well without any problem using an external keyboard.
  It came with Vista, but we installed XP with the same results. Also tried upgrading the Bios.

  * Water was spilled on this computer laptop previously.*
  * It is out of EMCO.*

  Is there maybe a registry tweak that can block the default browser to open this way?
  Anyone has any ideas on this one?

  There is a 'hard' switch just above the keyboard that opens the browser. I guess the connectors or printed circuits are corroded or damaged somehow so that any input on the keyboard also triggers this hard switch.

  Possibly a hack software to disable or block the button "Open browser" would solve the problem. How to turn off or reassign these hard buttons?

  Any help or ideas would be appreciated.

  > Toshiba repair center suggested replacing the motherboard at $500 (which isn't on the cost of a new cell phone?).
  Looks like you need to replace the motherboard if you do not want to use the computer's internal keyboard correctly
  You said that the water was reversed on this laptop previously, I think that's the reason why this keyboard problem happened

  > Is it may be a registry tweak that can block the default browser to open this way?
  It s unclear not for me if something like this is not possible, but in my opinion has nothing to do with the software (register), but with the hardware problem caused by spilled water
  You could try to reinstall the clean Windows operating system in order to check if this will help you
  But if the new facility doesn't help then you should use the external keyboard because I doubt a replacement of the motherboard would be an option due to high costs.

• Record time from start to trigger

  Hello

  I have a program that uses analog channels N to record data, they begin taking data (either finite or continuous) a trigger.

  I use the built in digital triggering but a software analog trigger (works well if). For now we'll just worry about digital triggering.

  I am trying to record the elapsed time since then when I start the program when the trigger signal is received - that is, when the program actually starts its data collection.

  I saw examples of how to put a stamp of time when relaxation HERE. However, I have a few differences in my code - mainly that I'm collecting channels N data rather than complicating it. Also I don't want to necessarily the timestamp, but the elapsed time from the beginning to receive the trigger.

  Right now I have some ideas:

  (1) somehow the timestamp of the start of the VI, then understand the timestamp of the relaxation in a manner similar to the above example, subtract the difference.

  (2) in debugging code, I find that the probes record the last update at some point in the code. Is it possible to use the actual code?

  (3) more difficult. Establishment of a new channel that observes the digital channel I'm tripping off the coast so that I can save its data permanently, wire this channel to trigger my analogue channels. then I see the time at which the trigger has exploded. But I'm not sure how to implement this.

  Looking for opinions as to what would be the best way to accomplish this task.

  Also, I can post my code if desired - I don't have because it's big enough and hard to follow.

  Thank you all,

  Beefcake

  Take a look at the range of Timing.

  In addition, if you are looking for the NI Developer Zone for 'elapsed time' you will find 160 documents.

  Surely something in one of these places will help you.

  Cameron

• Audio lags during recording.

  Hello

  I use an audio file for the lip sync, which is great, did a great job and playback is smooth. The real problem I have is the record. The audio is played slowly and blaming the video, which is also minced. During recording, I reach the end of the file audio in the Control Panel Assembly, while it remains "reads" to halfway. It is almost imposible to time and place keyboard triggers or otherwise manipulate when recording.  Playback is fine however.

  What is going on? Am I missing something?

  Please keep in mind that I save set to 1 x and hardware may not be enough. I have 64 GB of RAM, 8GB graphic card, multicore processor and SSD. Everything about this machine works butter smooth and things are in finger pressure.

  Please notify.

  Thank you!

  Thanks for the screenshot. We have a shift of rate of sample between input and output devices. Click settings and see if you can pass the Realtek to 48 k. If you can't do this, try changing the master clock to your Logitech microphone entry.

• iPad Pro / Magic Keyboard | Change the language

  Hi all

  I recently bought the Magic Keyboard (presentation in French) and I want to type on my IPad Pro. And here is my problem: when I need to type in a different language (e.g. English instead of French), I change the language of the dictionary and it automatically changes the physical keyboard! So, it makes the keyboard "French" of magic almost unusable for any other language (I have to "guess" where are the letters). The "Hardware keyboard" menu (general / keyboard) does not allow me to set a default physical keyboard that remains the same when I change language...

  Thanks in advance!

  AC1979 wrote:

  The "Hardware keyboard" menu (general / keyboard) does not allow me to set a default physical keyboard that remains the same when I change language...

  You gave just the physical keyboard to the French for each software keyboard separately.  There should be no problem it.   Let me know if you can't see how that works...

• my keyboard has sometimes unresponsive, despite verified the above. Then it works again after I have shut down and restart my mac. is this normal? If this isn't the case, that due to an application? for example, I installed photoshop and use it all the ti

  Jin

  Sometimes, my keyboard stops responding, despite the checkist troubleshooting.

  Then it works again after I have shut down and restart my mac!

  is this normal? If this isn't the case, that due to an application? for example, I installed photoshop and use it all the time... also openoffice document prog...

  What else could be?

  I just replace the keyboard with a new one, but the problem persists.

  my mac has also been in mac repair and they found nothing wrong.

  Thank you!

  Please run and view a report of EtreCheck http://etrecheck.com/

• MainStage stop drums trigger keyboard

  OK I have an Alesis V61 and MS3. It has 8 pads of the battery. I want to set up a very simple patch where all 61 note keyboard triggers ONLY a piano patch. I want one of the Eb trigger pads (2) - a handclap.

  I have 2 strips of channels, Yamaha Piano and Bluebird Drum Kit. The strokes I started with success of the drum pad. Everything is good. BUT the keyboard also plays samples of Bluebird, which is not good! How to stop the notes on the keyboard trigger the Bluebird Drum Kit samples? Thank you guys

  HA! After 3 hours of tinkering it worked (for me anyway). In the channel strip Inspector, MIDI input set none - kills the keyboard trigger the sample but not the pad... against intuitive but worked for me! Hope this helps someone else

• NB100 keyboard

  I bought a laptop NB100 mini and I am surprised that the numbers and letters are gray on the black keys. This makes it impossible to read in the dark keyboard. Take a look around, just how many keyboards do you see with letters other than white?
  I finally managed to find an email address for Toshiba and asked advice, they have another keyboard or suggestions.

  It's the answer that I received

  + "Thank you for your e-mail. +
  + Unfortunately, it's the color that comes standard and there is no way to change the keyboard to have different color keys. If when you bought the net book, you said you wanted white and gray keys not without having seen the net book, then the product must be returned to the dealer on this issue, but if you bought directly, then you would of bought the product, knowing that the keyboard is not white and grey writing. » +

  In other words of grass off the coast, we don't want to know.

  The guy could not even write English with the expression "would of". It truly annoys me so much.

  He is such a mistake fundamental to a national company like Toshiba multi, probably putting style before the feature.

  I also have an Azus EEE, which seems to have a similar size keyboard and thought about trying to find a spare part and share more. The only problem is that the blue functions are not in the same places.
  Another idea I am train is to use the transfer of lettering on the keys and paint over varnish, masking of a circular shape. This would likely cripple the warranty!

  In conclusion, a great piece of kit marred by gross stupidity.

  I'm willing to accept this inconvenience only because it is not a compatible product on the market otherwise he would have (+ or should I say would be of) +! were returned.

  Post edited by: grockel

  I think you have misunderstood something buddy
  You get no response from Toshiba here in the forum.

  This is a USER to USER forum, and there is no guy Toshiba

  What you get here are options and suggestions for people like me and you from customers of Toshiba and lovers who want to help the other guys.

  But it's true... keyboard labels are a bit too dark... White would be better... still...