(KB2656368): updated said successfully completed, but has not been

Similar Questions

• Update on a laptop that has not been used in almost 1 year

  My husbands cell phone has not been used since last October. He was diagnosed with leukaemia, shortly after he had and has not shown an interest to learn to use it until now. It has Windows 8 and we want to do the free update of Windows 10. The laptop wants to 79 updates before we start download Windows 10. He has been on and downloading these updates for more than 3 hours and the screen still says 0% complete. Is it normal to take so long after being unused for so long? Husband and I went to the challenge of the technology. Any help is greatly appreciated.

  There are many updates and update process may take several hours. You can suddenly find that updates show that almost complete.

  If there is anything on the laptop that you want to keep:

  Download and create a Windows 8.1 installation media and do a clean install of it. See creating installation for Windows 8.1 media. Accepting any offer to install updates during installation. 8.1 Windows installation media last will accept the keys to Windows 8. If your key is in the BIOS of the laptop, it will be detected automatically.

  At the end of the installation, you will be prompted to upgrade to Windows 10 and will be able to do an immediate upgrade Windows 10 without updating the Windows 8.1 installation.

  Visit the support of the manufacturer of your laptop to see if there are model specific drivers you need. Installing Windows 8.1 and 10 will not provide the latest drivers.

  If you want to keep the existing installed applications and files, you can create 8.1 Windows installation media and run the setup.exe on it then in Windows 8.

• It is safe to connect to the internet to update XP if the computer has not been used for a good year or so?

  Hi all - I have another laptop which has remained unused for probably over a year or more, and I want to start using it again. It works under XP, and currently has Service Pack 2 installed. My question is: is it safe to connect to the internet now and start downloading all the required Windows updates? My concern is that, as just like the anti-virus, firewall, even Windows itself have not been updated in so long, it would be imprudent to start the internet connection at this point? Is it safe to go forward and to connect and update, or is it better to download updates etc on another computer, put it on a disc/USB and then use it to install updates? Thanks in advance!

  Consider that he is therefore authorized to connect the computer to our broadband services to update the anti-anti-virus/firewall?

  Yes, as long as the firewall is turned on and that's the first thing you do online (i.e., no surfing, no audit e-mail, no chat, no download of anything else).

  The Windows Security Center will let you know if something went wrong.

  You're welcome and thank you very much for your comments!

• I don't see the Ripper group in first pro after update 20141, and 2014.2 has not been set.

  

  Please someone help me to solve this problem, I'm literally crazy that I have to change in my address and I am constantly hanging up to different monitors, claiming a different workspace from most of the time. Thanks in advance.

  To be clear, I can't see the Ripper of group and therefore having to reset my workspace everytime I want to anchor a group of panels not anchored.

  You are right. The ability to move a panel group has been removed as part of the redesign of the user interface which started in CC2014.1. I'm bored, too. If you are so inclined, you can submit a request/complaint to the www.adobe.com/go/wish.

• I have an older version and has not been completely installed, but I never installed any just Messenger Skype years ago, said

  says I have an older version and has not been completely installed, but I have never installed a Skype Messenger said to restart, just a long time ago, but I did 4 times and continues to repeat again and again. Looked in control don't add remove any messenger or Skype in there.

  Hello

  What is the full error message?

  I suggest you to consult the following link and uninstall Skype and then reinstall and check.

  How do I completely uninstall and reinstall Skype for Windows desktop?

  https://support.Skype.com/en/FAQ/FA10634/how-can-i-completely-uninstall-and-then-reinstall-Skype-for-Windows-desktop

  Now, install it by following the steps in the article, and the check.

  How to install Skype?

  https://support.Skype.com/en/FAQ/FA79/how-do-i-install-Skype

  Let us know if you have any additional questions.

• is it possible that I can work on a movie published in the latest version of first with a first CC 2015 version that has not been completely updated?

  is it possible that I can work on a movie published in the latest version of first with a first CC 2015 version that has not been completely updated?

  I m edition trailer of friends, but the very first version is not fully updated, so it does not recognize the project... Is it possible to fix this?

  There is no way to go "in time" and do older versions of body include the latest versions of the project file format.

  Sorting is to get your current version.

• Windows XP SP3 Home. Acrobat Reader XI installed with message Instalation complete but Acrobat Reader XI has not been installed.

  Windows XP SP3 Home. After Acrobat Reader X uninstalation I tried to install Acrobat Reader XI.
  Instalation completed successfully with the message "Installation complete", but is not installed Acrobat Reader XI.
  Any suggestion?

  Find the solution.

  I download my files from the download via Adobe page. Adobe - Adobe Reader: for Windows

  Adobe Reader has been installed.

• Windows Update has not been installed successfully in 8 months (error codes: 8007371B & 643)

  original title: Windows Update has not been installed successfully in 8 months

  Windows needs to install 7 updates each time I receive the notification. in any case, he attempts and succeeds only and him remains always fail. Those who succeed keep be redownloaded too, so I really have no idea if it's REALLY successful.

  Error codes:

  Code 8007371B

  Code 643

  And the last 4 are as follows:

  Code 8007371B

  The success is always to:

  A security update for Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package (KB2538242)

  Thank you

  -Mike

  Run the tool and then try WU.

  Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2
  http://support.Microsoft.com/kb/947821

• Cannot install itunes. It installs but when I clicked on it said has not been installed correctly. I uninstalled, reinstalled several times but does not work.

  Cannot install itunes. It installs but when I clicked on it said has not been installed correctly. I uninstalled, reinstalled several times but does not work.

  Trying to download iTunes again, but instead run the installer from its current location, try saving it to your hard drive and then run the configuration file.

  Problem installing iTunes or QuickTime for Windows
  http://support.Apple.com/kb/ht1926

  iTunes for Windows Vista or Windows 7: troubleshooting...
  http://support.Apple.com/kb/ts1717

  You can try both uninstalling and reinstalling as a new user to see if that helps:
  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  If this isn't the case, I recommend you contact Apple for assistance.

  Check your hard drive for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

• I bought a cc to be nl, but it has not been installed, I contacted the service to be, they said it has been used for a different adobe id, may you please search for me?

  I bought a cc to be nl, but it has not been installed, I contacted the service to be, they said it has been used for a different adobe id, can you please have a look for me?

  Hi Xiong,

  Please contact customer service for assistance with your Adobe CC command.

  Kind regards

  Sheena

• I've updated the credit card but my Muse subscription has not been renewed. Can you please help?  Thank you, Polly Leitao

  Hello

  I have a CC month for Muse subscription ending in August 2015. I missed the last two payments (December 2014 & January 2015) because the credit card, I got the file has been exceeded and I forgot to renew it. Yesterday I updated the credit card, I was charged for January 2015, but my Muse subscription has not been renewed. Can you please help?

  Thank you

  Polly Leitao

  Hello Polly,

  for a better explanation: Please try to find members of the staff of Adobe. Here are some links

  https://forums.Adobe.com/message/7026062#7026062

  https://forums.Adobe.com/message/7068993#7068993

  https://forums.Adobe.com/thread/1664231?SR=stream&ru=1545406

  where officials have tried to help in many cases (not really relevant to your problem). I got to know some (others) as very useful.

  You can get more and feel free to ask the help of a personal message.

  Hans-Günter

• I went through all the steps to download the trial version of Adobe Photoshop elements 13. It is said download completed, but nothing happened then prompting to launch the program. I checked the finder (MAC OS) and could not find. Don't have Adobe downloa

  I went through all the steps to download the trial version of Adobe Photoshop elements 13. It is said download completed, but nothing happened then prompting to launch the program. I checked the finder (MAC OS) and could not find. Don't have Adobe download wizard. How to open and run the program?

  Jediii please see Photoshop elements 13 full download. What to do next? where this topic was just discussed.

• Update of Vista SP2 MBR has not installed? 0 x 80004002

  This has been asked before, but the link given a Microsoft Support technician has been no help and not even related to this problem.

  When I run the normal Zune 4.7 installer it says that it cannot connect to Microsoft Update. I received the package from microsoft and who was running and I get the error "the installer must stop because the perl 'Vista SP2 Update MBR' package has not been installed.
  «Error code: 0 x 80004002»
  I tried to install this for a week now.
  (I tried to uninstall SP2 and re - install, which installed successfully and I still get this message... help?)
  Edit: I tried uncompressing the installer and run the .msi file in the package folder. It starts the installation and the load completely bar then go back and cancel all. During "installation" error boxes pop up.
  ' FirewallCA 21:34:09.700: 'PreserveWirelessFwRuleConfig' operation has completed with the outcome 0x80070005. »
  ' NssCA 21:35:11.055: 'UnregisterUrlNamespace' operation ended with the result 0 x 80070002. »
  ' DriverCA 21:36:27.806: 'InstallHardwareDriver' operation ended with the result 0 x 80070057. »
  The "Zune" shortcut that had appeared on my desktop disappears.
  A Zune file appeared in my Program Files folder, but the only files in there are Zunewmdu.dll Zune WmduResources.dll and a folder called 'en-US' with ZuneWmduResources.dll.mui inside.
  Running Vista Home Basic 32-bit

  You must register a dll file

  1 goto Start > Run
  2. Type "CMD" and press enter
  3. in the command window type "regsvr32 c:\windows\system32\wuaueng.dll" and hit enter
  4 run the Zune install again

• Still not get 2016 Outlook and Contacts calendar to synchronize with iCloud. iCloud data file has not been in Outlook but iCloud add-in is enabled.

  I use Windows 10 (v1511), 2016 Outlook Office 365 and iCloud 5.2. Mail is downloaded directly to Google mail Outlook. Calendar and Contacts live in iCloud and work properly in my iPhone, iPad and the app iCloud on the PC. Its just perspective that is not sync with iCloud to get these items.

  In outlook, the Setup program is not set up a data iCloud file ' * APLZOD.pst ' in the account tab data file settings. When you try to install a new data file in Outlook in account settings, the iCloud type available, but when you select what the error message says that this cannot be set in the iCloud Control Panel

  I tried several complete removal and then re - installs to iCloud for windows and have also done with the firewall and antivirus disabled active.

  I also deleted the Outlook data file * *.ost and allowed the installation program rebuild this application fee.

  The iCloud "add to" Outlook "add-ins" is active.

  The calendar, Contacts and tasks of the iCloud Panel section is checked when re-built, but after Outlook is running this section has not been verified and when you try to check it out and apply the change he UN-checks itself.

  Sorry for the long post, but I tried to solve this problem for some time.

  Thank you

  Chris

  The same problem.  I use iCloud for Windows 5.2 and Windows 10, 2016 office.   Everything worked well for several months until a few months ago, when sync calendar has stopped working.   I've updated iCloud of 5.1 to 5.2 but that just killed altogether.  Tried uninstalling icloud and relocation costs.  No luck.  When the iCloud settings appears, I check the box for the calendar and Contacts.  The driver then disappears.   I check again and it sticks.  But no messages on 'configure '.   When I close and reopen, the box is unchecked.   A few days ago I had the same problems the other another thread where he would show "set up" spinning forever (well, 30 minutes before giving up).   Not sure if it's an Apple problem or a problem of office.  But this is of course a problem.

• My ipod 5th generation is stuck by resetting the settings and I tried holding the power and the "home" button but has just the same. Also, I tried to sync it upward, so I tunes but it has not been recognized and I can't answer on my ipod. Help, please!

  My iPod 5th generation is stuck by resetting the settings and I tried holding the power and the "home" button but has just the same. Also, I tried to sync it upward, so I tunes but it has not been recognized and I can't answer on my iPod. Help, please!

  Try the remaining shares of:

  - iOS: do not respond or does not light

  -Also try DFU mode recovery mode post-test

  How to put iPod touch / iPhone in DFU "Karthik doodles."

  -If failed and that you cannot completely turn completely the iOS device, leave the battery to drain completely. After loading a hour repeat the foregoing.

  -Try a different cable

  -Try on another computer

  S ' there is still not successful that usually indicates a hardware problem and an appointment at an Apple store Genius Bar is in order.

  Shop Apple Store - Genius Bar