KB971513 Windows Automation 3.0 Setup error

Similar Questions

• Windows Automation api. Setup error: cannot update your XP files because the language installed is different from the update.

  Installing Win AP Automation! 3.0 to accelerate VB Express 2010.

  Warning message:

  Update for MS Wim (KB971513) Setup error

  Setup cannot update your Windows XP files because the language installed on your system is different from the update language.

  My XP language is Norwegian. The rest of my 'stuff' MS is English.

  
  

  • What you have already tried to solve the problem

  Hello

  I suggest you to check the article mentioned below.

  Error message: Setup cannot update your Windows XP files

  http://support.Microsoft.com/kb/555042

  I suggest to select the language appropriate to the download page and check if you are able to install the update on the system or not. The update that you are trying to install on the system must be of the same language as installed.

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Windows Live Essentials 2011 Setup error 0 x 80040705

  When I try to install Windows Live Essentials 2011, I am getting error 0 x 80040705.

  The source says that the problem is with the file D3DX10_42.  I am running Windows 7 64 bit.  I tried:

  • remove all older versions of Windows Live, and then reinstall Essentials 2011
  • Download a new copy of the file and replacing it in System32 and SysWOW64
  • installation of DirectX June 2010 update
  • complete installation of the version of Live Essentials 2011 instead of the web version

  .. .but I get the same error whenever I try to install.

  Anyone have any ideas?

  Hi all

  The best and 100% working solution for all problems of installation and configuration, is related to the Windows Installer database. Because it stores information about the temporary location of the packages install but it is never update itself on the second tent installation or somehow got in conflict on this subject causes such errors as:

  -The path to the installation package does not.
  -Windows cannot find the specific file.
  -Installation failed (unknown error)

  The Solution:

  Download this utility: Windows Installer Clean Up it's a free version, install it then run it, look at the list of programs and select the program that you are trying to install (in our case, select here all that starts with: Windows Live and also select Microsoft Silverlight and you can select multi using the CTRL key), then press Clean. It will take about 5 ~ 10 minutes to erase all the information stored in the database of Windows Installer, once finished you can close the tool, run the Setup program again and throw me a big "thank you!" :-)

  Shera

• Photosmart C4795 on Windows 7 64 bit Setup error

  Dear experts,

  I was faced with a boring issue while installing HP Photosmart C4700 all-in-One Printer series full feature software and driver recently I donwloaded the HP Web site.

  During installation, the window suddenly closes when the' updates'. No error message or anything that might tell us what has gone wrong, it disappears from my screen.

  I found the post following with exactly the problem as mine but produces different. I tried this solution but it does not work for me: http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/hp-photosmart-plus-b209a-m-driver-inst...

  I hope someone can give me a tip because I'm really out of options here.

  I appreciate all help.

  Thank you
  Ricardo

  Hello Ricardo,

  Rental try, proceed as follows and let me know the results:

  • Start the installation and follow the steps until the display of EULA (license agreement).
  • Click on the link 2 - using the Internet connection settings and select No, thank you for both of these questions.
  • Confirm the selection, to accept the EULA and continue with the installation which should no\w go further.

  Plese I want to know if this is useful,

  Shlomi

• Windows Live Photo Gallery Setup error

  I tried to install Photo library direct windows on my vista machine.  I tried to disable Norton Internet Security, I have disabled the windows firewall, I have 80G of free on C, 250G of free on D.  I deleted my internet cache, I ran disk cleanup, too.

  Whenever I get the following error:

  Could not install programs

  Coulding install these programs: Gallery of photos and Movie Maker

  An unknown error has occurred.

  Error: 0 x 80040607

  Source D3DX9

  Could not install programs

  Coulding install these programs: Gallery of photos and Movie Maker

  An unknown error has occurred.

  Error: 0 x 80190190

  Source: UXPlatformCore

  Help?

  G

  Hello

  These errors can occur when you have other Windows Live programs on your computer that comes into conflict with the installation you are trying to complete.

  Uninstall, and then reinstall Windows Live Essentials

  To do this, visit the following Web site and download the latest version of Windows Live Essentials installer.
  http://explore.live.com/Windows-Live-Essentials?OS=other

  Also check out this link:
  http://www.windowslivehelp.com/thread.aspx?ThreadId=e963ce60-6e2d-4DAD-8b7e-e902a73ba08d

  If the problem persists, then please post your query on the Windows Live community forums to get help.
  http://www.windowslivehelp.com/

  Kind regards
  Afzal Taher
  Microsoft technical support engineer

• Windows vista pack 1 Setup error service: 0x800F0823

  Ive been trying to get the .net framework 4 to work to be able to run a program and expert assistance for d... they said that I need to get SP2 first... but when I installed SP2, it says I need SP1, so here, I am now.

  It will install and then after a few seconds on the installation, this error comes up.
  0x800F0823

  I have vista Home premium 32. the installation program I used was the manual.

  Hi GioCaballero

  
  Please refer to the below mentioned article and check if the given steps help.

  http://support.Microsoft.com/kb/925316

   

  I hope this helps.

• Win 2003 error - try to add and remove windows components I get this error. IIS.dll Setup library could not be loaded

  When you try to add and remove windows components I get this error. IIS.dll Setup library could not be loaded, or function OcEntry could not be found. code error 0x7e is on a system win 2003

  Hi MickRl,

  The question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Get the error during the installation of Windows XP Professional: a fatal error has occurred. Setup cannot continue.

  I get the following error message when you install Windows XP Professional: a fatal error has occurred. Setup cannot continue. Please contact your support representative or a seller/provider untorised. Press to stop the system. I have real service pack 1 XP and the restore CD. After the restoration CD Formate the hard drive and installing Windows starts, he cannot continue and cela happened on two different PC (HP dx2000 and HP dx2300MT. Help, please

  Hello

  As has happened on two computers, I would look on the disc as the problem.

  "I have genuine XP service pack 1.

  What is the exact drive do you use?

  See you soon.

• Error - Windows needs to continue Setup could not be installed during the upgrade to Service Pack 2.

  Original title: computer locked up on upgrade to xp p2.

  I've been upgraded to xp p2 to p1 and the computer gave me a fatal error - one of the components of Windows needs to continue Setup could not be installed - how do this and to the computer.  I tried safe mode, but it kicks me back to the same screen

  Hi jodyjones,

  You can use the automatic recovery feature to recover your computer to its previous configuration. For more information, follow this link & check if it helps.

  How to use the automatic recovery feature to recover your computer or your Tablet PC if the Windows XP Service Pack 2 Setup program is not completed successfully

  
  Reference: installation of the Service Pack 2 (SP2)

  Hope the helps of information.
  Please post back and we do know.

• Windows 7 Ox80070017 Setup error

  Good then I got an installation disc that made the files it contains and appear on my computer but I have a new problem now in which an error pops up saying that some files are not which is really unfortunate. The error code I get is: Ox80070017

  original title: Windows 7 Setup error

  Hi Mohamed Kebbay,

  Error code 0 x 80070017 means generally bad media. I would recommend that you download the file again, you may have corruption in ISO itself. So if possible, download the file again. After you download the new copy, try burning at a lower setting 4 X or 8 X speed. Once you burn the disc on a lower setting with the new ISO standard, and then see if you can install Windows 7.

  See installation and reinstallation of Windows 7 for more information on installing Windows 7.

• Windows Media Center Setup error: setup parameters for your region could not be determined.

  original title: MEDIA CENTER SETUP ERROR: Configuration settings for your region could not be determined

  windows vista operating

  Media Center worked then xbox 360 could no longer find videos.  I can not run the Setup program for media center because of this message:

  The configuration settings for your region could not be determined.  Restart your computer to solve.

  Things I've done:

  restarted computer several times

  run system restore

  disabled the norton 360 firewall settings

  has ran norton pc tune up

  still can't media center to work Please HELP

  Thank you

  Hello

  The problem may occur if the Windows Media Center components are not registered correctly.

  I suggest to try the following steps to solve the problem.

  The registry Windows Media Center components

  =========================

  1. click on start-> all programs-> Accessories, right-click command prompt and click Run as administrator.

  2 type the following commands, press ENTER after each line.

  REGSVR32 ATL. DLL

  CD C:\WINDOWS\EHOME

  EHSCHED /UNREGSERVER

  EHSCHED/SERVICE

  EHRECVR /UNREGSERVER

  EHRECVR/SERVICE

  EHREC. /UNREGSERVER EXE

  EHREC. EXE/REGSERVER

  EHMSAS. /UNREGSERVER EXE

  EHMSAS. EXE/REGSERVER

  We can open Windows Media Center now?

  It will be useful.

• Cannot install Dreamweaver CS4 on WIndows 7.  Setup error

  I can't install Dreamweaver CS4 on WIndows 7.  I get a vague error that says: Setup error, sontact Adobe customer service. Customer service Adobe refuses to help me.  That really bothers me.

  First of all, I want to thank the people who have responded to my message.  I am impressed by your desire to help and interest to my problem of extreemly.  Thank you very much! I appreciate it.

  I've not seen a way to get a transcript of my cat.  I should have it printed at the end of my cat. Overall, I think my concerns are with Windows itself and also how Adobe as a company manages a call from someone who gets a Setup error that says "call Adobe customer service. I bought this program runs on Windows 7 and I'm installing on a Windows 7 computer. I think that if Adobe will give a vague error message and tell you to contact them, they should give me more help "your product is too old, good luck on the forums. I could see if I call and ask him how to do something, maybe that my product is too old for this, but I think their reaction was unacceptable.  I hope that enough other people are complaining so that Adobe changed this policy.

  Wow, it took a lot of time to deal with. I guess it's mainly a Windows file permissions problem, but I think that Adobe should a property for a client to have to spend many HOURS trying to install their program on the operating system original they bought the program for.

  Certainly, I don't like the way Adobe Dreamweaver Setup treats errors. Here are the facts as I know them.

  When Setup fails during installation, installation subsequesnt would fail, but it would give a VERY cryptic error indicating that the installation has failed and I need to contact Adobe customer service.

  In order to re - install, I had to uninstall.  Naturally my UN-installs failed every time, too. After much trial and error and audit of the forumns, I found installation of program under c:\programs files. I deleted them, rebooted, uninstalled with no error.  Then I could re - install without the vague error "contact Adobe customer service.  Note that I had to reinstall several times to get to the bottom of the problem installation so it takes too much time to understand.

  In the end, I had to manually delete the C:\Windows\Installer to get Dreamweaver to install.  It took a lot of time to understand, too.  It is always installed with errors, but he says that Dreamweaver would work with limited functionality. So far, it's good enough for me and I'm tired of non-billable expenses on that.

  Following is one of the main erros I've had when you first install failed.  IF ANYONE KNOWS EXACTLY WHY MY INSTALLATION NO WAS NOT I WOULD LIKE TO KNOW.  IT SEEMS THAT IT IS NOT HAVE THE OPERATING SYSTEM PERMISSIONS TO ACCESS THESE FILES, BUT THIS IS NOT POSSIBLE THAT THE PROGRAM IS INSTALLED AS AN ADMINISTRATOR. Any thoughts?

  Thanks again to all who helped!

  Adobe Dreamweaver CS4

  Error:

  Error 1603. Internal error 2203. C:\Windows\Installer\241f1. IPI,-2147287035

  Adobe default language CS4

  Error:

  Error 1603. Internal error 2203. C:\Windows\Installer\241a3. IPI,-2147287035

  Adobe ExtendScript Toolkit CS4

  Error:

  Error 1603. 1310.error error writing to the file: C:\Windows\Installer\24186.msi.   Make sure you have access to this directory.

  Kuler

  Error:

  Error 1603. 1310.error error writing to the file: C:\Windows\Installer\241e0.msi.   Make sure you have access to this directory.

• Windows 7 - upgrade Setup error we are unable to create or save new files in the folder in which this application was downloaded

  I just bought the Windows 7 Home Premium upgrade from the downloaded Microsoft store the installation files. I am currently on Windows XP 32-bit, and try to install Windows 7 Home Premium 64-bit.

  Now, whenever I try to run the executable from Windows 7, I get this error message:
  http://i.imgur.com/8C8nM.PNG
  Now, I tried to make the folder I downloaded files is NOT unalterable, but every time I try to do it right, he returns to read-only. I can do all the files Windows 7 installation not in read-only, but the folder remains read-only. I moved the installation files in different locations, only to get the same results.
  Yes, I'm on an administrator account and I still have this problem.

  Hello

  32-bit to 64-bit is not a supported upgrade path. You must do a clean installation of 64-bit.

  In addition, upgrade is not possible from XP to Win7. It will be a custom installation.

  As a first step I suggest you back up the data before you do a custom installation. Check the link for more information.

  http://support.Microsoft.com/kb/320820

  Also check the following links:

  Upgrade Windows XP to Windows 7

  http://Windows.Microsoft.com/en-AU/Windows7/help/upgrading-from-Windows-XP-to-Windows-7
  http://Windows.Microsoft.com/upgrade
  http://TechNet.Microsoft.com/en-us/library/dd772579 (WS.10) .aspx

  I hope this helps.

• What dose this do download Windows Automation API library update for Windows XP (KB971513)

  This update shows in my softwear how dose he do

  Hello

  You can check the link which corresponds to the description on the update below: Description of the Windows Automation API: http://support.microsoft.com/kb/971513

  Also for reference: overview of Windows Automation API: http://msdn.microsoft.com/en-us/library/dd561932(v=vs.85).aspx

• HP Envy 15-K204NA: upgrade to Windows 10 has failed with error 80070714. Help, please!

  Hello.

  I hope there, can someone help me!

  I tried several times to improve my HP Envy 15-K204NA for 64-bit Windows of 8.1 to 10 Windows Home, but she continues to fail with the error code 80070714.

  I use Protection Premium Bullguard and Acronis True Image installed.

  I disabled the SQL services as suggested by other posts on the internet, but nothing seems to work.

  When I run the upgrade from a DVD burned ISO, it gets 37% and fails.

  Hope you can help. (fingers crossed!)

  Chris

  The Setup error log file shows:

  2015-08-05 16:48:34, error CallPidGenX: PidGenX function failed on this product key. (hr = 0x8a010001)
  2015-08-05 16:48:37, error CallPidGenX: PidGenX function failed on this product key. (hr = 0x8a010001)
  2015-08-05 16:48:49, error CONX failed to initialize the data of net class 80070005

  2015-08-05 16:48:50, CONX error could not get data from the printer class 80070057

  2015-08-05 16:49:21, CONX error could not open the INF [tib_mounter.x64.inf] with 0 x 80070002

  2015-08-05 16:49:21, CONX error cannot initialize the driver package [tib_mounter.x64.inf]

  2015-08-05 16:49:21, CONX error could not open the INF [oem46.inf] with 0 x 80070002

  2015-08-05 16:49:21, CONX error cannot initialize the driver package [oem46.inf]

  2015-08-05 16:49:23, CONX error could not open the INF [tib_mounter.x64.inf] with 0 x 80070002

  2015-08-05 16:49:23, CONX error cannot initialize the driver package [tib_mounter.x64.inf]

  2015-08-05 16:49:23, CONX error could not open the INF [oem46.inf] with 0 x 80070002

  2015-08-05 16:49:23, CONX error cannot initialize the driver package [oem46.inf]

  2015-08-05 17:06:14, error MS RegLoadKeyW failed to mount C:\$WINDOWS.~BT\Sources\SafeOS\SafeOS.Mount\WINDOWS\system32\config\SYSTEM to SP_HIVE_LOAD_ALIAS_SYSTEM [gle = 0x801f0005]
  2015-08-05 17:06:14, SP SPMountOfflineHive error: cannot mount the hive offline: C:\$WINDOWS.~BT\Sources\SafeOS\SafeOS.Mount\WINDOWS\system32\config\SYSTEM. Error: 0x801F0005 [gle = 0x801f0005]
  2015-08-05 17:06:14, SP CEnableTelemetryForImage error:oExecute: cannot load the hive of the system for the C:\$WINDOWS.~BT\Sources\SafeOS\SafeOS.Mount\WINDOWS OS offline. Error: 0x801F0005 [gle = 0x801f0005]
  2015-08-05 17:06:14, error [SetupHost.exe] ReAgentXMLParser:arseConfigFile (xml file: C:\$WINDOWS.~BT\Sources\SafeOS\ReAgent.xml) return 0 x 2
  2015-08-05 17:06:19, error MS by using the current time as a Timestamp of recovery.
  2015-08-05 17:06:22, error MS cannot open session DISM WinPE. Error: 0 x 80070714 [gle = 0x0000007a]
  2015-08-05 17:06:22, MS operation failed error: drivers of Migration process. Error: 0 x 80070714 [gle = 0x000000b7]
  2015-08-05 17:06:22, MOUPG MoSetupPlatform error: ExecuteCurrentOperations reported failure!
  2015-08-05 17:06:22, MOUPG MoSetupPlatform error: using the action error code: [0 x 80070714]
  2015-08-05 17:06:22, CDlpActionDriverMigrate::ExecuteRoutine (544) MOUPG error: result = 0 x 80070714
  2015-08-05 17:06:24, error MOUPG CDlpActionImpl < < < < class IMoSetupDlpAction > CUnknownImpl > CDlpObjectInternalImpl > CDlpErrorImpl > class class class: Execute (441): result = 0 x 80070714
  2015-08-05 17:06:24, CDlpTask::ExecuteAction (3243) MOUPG error: result = 0 x 80070714
  2015-08-05 17:06:24, CDlpTask::ExecuteActions (3397) MOUPG error: result = 0 x 80070714
  2015-08-05 17:06:24, CDlpTask::Execute (1631) MOUPG error: result = 0 x 80070714
  2015-08-05 17:06:24, CSetupManager::ExecuteTask (1953) MOUPG error: result = 0 x 80070714
  2015-08-05 17:06:24, CSetupManager::ExecuteTask (1916) MOUPG error: result = 0 x 80070714
  2015-08-05 17:06:24, CSetupManager::ExecuteInstallMode (736) error MOUPG: result = 0 x 80070714
  2015-08-05 17:06:24, CSetupManager::ExecuteDownlevelMode (376) MOUPG error: result = 0 x 80070714
  2015-08-05 17:07:09, error MOUPG CSetupManager::Execute (222): result = 0 x 80070714
  2015-08-05 17:07:09, error MOUPG CSetupHost::Execute (370): result = 0 x 80070714
  2015-08-05 17:07:12, CDlpManager::AsyncSerializeDisable (471) MOUPG error: result = 0 x 80070216

  I have now abandoned and rebuilt my laptop using the recovery partition.  The upgrade to Windows 10 came immediately, and it installed fine.

  Hooray