Keep centered playhead

Similar Questions

• Hearing CC: How to keep the playhead on timeline centered

  Re: Audobe hearing CC, current version

  Task:

  My task is to listen to a podcast recording and editing the umms and disgusting ahhhs and mouth-noises.

  Problem:

  When you play a track to change, I need to use the mouse to adjust the zoom bar permanently scrub so that the playback head is centered on the screen.

  Question:

  How to change the display so that when I listen to the track that the playhead is well centered on the screen?

  Thank you

  Buck

  Edit > Preferences > reading. Specifically put a check mark in the focused area editing waveform auto-scrolling, but there are still other settings you can change, depending on your particular tastes.

• How can I keep centered slidshow regardless of the size of the browser

  I have a slideshow with 40 images stretched right to 8850.  I basically want to pin it but does not lose the left to right scrolling of the miniature container.  How can I do this?

  Currently floats slideshow when you change the size of the browser and will cover the header.  I want to keep it centered on the page regardless of the dimensions of browsers

  Any help would be appreciated with gratitude!

  Thank you!

  I checked out the site you mentioned, not exactly the same thing you mentioned (like the one you described is more reactive behavior), but you can go full-screen with slide show.

  Where the images will be suitable for all sizes of screens. I suggest to try, create a new site and then check with the images in the slide show full-width.

  Thank you

  Sanjit

• Resize & quot; Stage & quot; Dimensions but keep centered

  My animation film is complete. However, I would like to do a little Flash workspace. When I change the dimensions, however, it takes extra space on the right and down. Now my animation is heavy at the top left. Is it possible to resize so that the animation remains focused?
  
  Thank you.

  Well, you can try this:
  1. make sure that all your layers are unlocked
  2. Select all images in your movie (make sure you get all). This will automatically select all the objects on the stage.
  3. using the selection tool, drag all the objects for the upper left corner of the stage.
  4. try to run it, but do not save it to your original until you don't know it's okay.
  This should work unless your using Actionscript to change the x, y of the positions of the objects dynamically.
  5. you can then cut your step to a size that you decide.

• Highlight in the game does not not after update 10.2.1

  Just updated to 10.2.1. Never had a problem with spirals in game before now.

  However scroll in the game does not simply work in the main area. Sometimes it scrolls, but it is buggy, biased and bouncing around. Very weird. Other times, than it does not simply scroll. It works very well in the sandbox of the editor.

  I have the blue scroll in the checked play icon. I tried with all three settings (right click on icon) and their many variations, but it still does not work properly.

  Any thoughts?

  2015 Macbook pro 15 inches on El Capitan 10.11.2

  Yes... Confirmed known bug... Unfortunately.

  Keep centered playhead

  If all goes well a new update will solve this problem...

• Keep things centered

  I'm exhausted, lost and confused. Otherwise, I'm happy. If I use one of the 3 column of DW templates, how can I insert a div in the middle column, for example, and always keep this (non-fixed) centered div in the document? Everything I've read suggests that the beauty of a div is the ability to control the situation. They forget to mention anything about keeping centered in a column.
  
  EDIT: I finally found the answer by searching (I thought I had exhausted that already). But, Mollymurphydaisy wrote: ' to Center your site you must put all your layers inside a package or container. " If you select the body tag in the tag selector, it will select all your layers. Then go to Div Insert and select wrapper in selection. I usually call this div #wrapper. You want to check and make sure that when you select one of your divs layer they appear within the #wrapper div in your tag selector. This will confirm that everything is indeed inside the package.
  
  Now, go to your control panel CSS and change the style of #wrapper. You want to implement the relative positioing. Click OK. Go back to the CSS panel and reselect ID #wrapper and down to add a property. Choose the margin in the menu drop-down and type in car next to it (you can do this part in the dialog box change the CSS only in the append property.)
  
  This should pass all your content to the center of the browser window. »

  I'm exhausted, lost and confused. Otherwise, I'm happy. If I use one of the 3 column of DW templates, how can I insert a div in the middle column, for example, and always keep this (non-fixed) centered div in the document? Everything I've read suggests that the beauty of a div is the ability to control the situation. They forget to mention anything about keeping centered in a column.

  EDIT: I finally found the answer by searching (I thought I had exhausted that already). But, Mollymurphydaisy wrote: ' to Center your site you must put all your layers inside a package or container. " If you select the body tag in the tag selector, it will select all your layers. Then go to Div Insert and select wrapper in selection. I usually call this div #wrapper. You want to check and make sure that when you select one of your divs layer they appear within the #wrapper div in your tag selector. This will confirm that everything is indeed inside the package.

  Now, go to your control panel CSS and change the style of #wrapper. You want to implement the relative positioing. Click OK. Go back to the CSS panel and reselect ID #wrapper and down to add a property. Choose the margin in the menu drop-down and type in car next to it (you can do this part in the dialog box change the CSS only in the append property.)

  This should pass all your content to the center of the browser window. »

• How can I Zoom in a knot is centered in a ScrollPane?

  I created a small example application to zoom a node.
  
  The application is currently running to stapling the node when the node becomes larger than the visible area of its container.
  
  I would like to place the node in a ScrollPane and maintain the following properties:
  
  1. If the display window available scrollpane is greater that the node, the node is centered in the display window.
  2 scroll of the mouse wheel anywhere in the display zoom in and out, node it is not pan the node.
  3. when zooming in or out on the node, the node does not move autour, but zooms still inside or out on the current center of the display window.
  4. by pressing and dragging the mouse over the node you can pan the visible portion of the node in the display window.
  
  The behavior of zoom without pan around all node should be exactly the same as the behavior that is clipped by the sample application.
  
  What is the change of the sample request needed to obtain the desired behavior?

  import javafx.application.Application;
  import javafx.beans.value.*;
  import javafx.event.*;
  import javafx.geometry.Bounds;
  import javafx.scene.*;
  import javafx.scene.control.*;
  import javafx.scene.image.*;
  import javafx.scene.input.*;
  import javafx.scene.layout.*;
  import javafx.scene.paint.Color;
  import javafx.scene.shape.*;
  import javafx.stage.Stage;
  
  public class GraphicsScalingApp extends Application {
    public static void main(String[] args) { launch(args); }
  
    @Override public void start(final Stage stage) {
      final Group group = new Group(
          createStar(),
          createCurve()
      );
  
      Parent zoomPane = createZoomPane(group);
  
      VBox layout = new VBox();
      layout.getChildren().setAll(
          createMenuBar(stage, group),
          zoomPane
      );
  
      VBox.setVgrow(zoomPane, Priority.ALWAYS);
      Scene scene = new Scene(
          layout
      );
  
      stage.setTitle("Zoomy");
      stage.getIcons().setAll(new Image(APP_ICON));
      stage.setScene(scene);
      stage.show();
    }
  
    private Parent createZoomPane(final Group group) {
      final double SCALE_DELTA = 1.1;
      final StackPane zoomPane = new StackPane();
  
      zoomPane.getChildren().add(group);
      zoomPane.setOnScroll(new EventHandler<ScrollEvent>() {
        @Override public void handle(ScrollEvent event) {
          event.consume();
  
          if (event.getDeltaY() == 0) {
            return;
          }
  
          double scaleFactor =
            (event.getDeltaY() > 0)
              ? SCALE_DELTA
              : 1/SCALE_DELTA;
  
          group.setScaleX(group.getScaleX() * scaleFactor);
          group.setScaleY(group.getScaleY() * scaleFactor);
        }
      });
  
      zoomPane.layoutBoundsProperty().addListener(new ChangeListener<Bounds>() {
        @Override public void changed(ObservableValue<? extends Bounds> observable, Bounds oldBounds, Bounds bounds) {
        zoomPane.setClip(new Rectangle(bounds.getMinX(), bounds.getMinY(), bounds.getWidth(), bounds.getHeight()));
        }
      });
  
      return zoomPane;
    }
  
    private SVGPath createCurve() {
      SVGPath ellipticalArc = new SVGPath();
      ellipticalArc.setContent(
          "M10,150 A15 15 180 0 1 70 140 A15 25 180 0 0 130 130 A15 55 180 0 1 190 120"
      );
      ellipticalArc.setStroke(Color.LIGHTGREEN);
      ellipticalArc.setStrokeWidth(4);
      ellipticalArc.setFill(null);
      return ellipticalArc;
    }
  
    private SVGPath createStar() {
      SVGPath star = new SVGPath();
      star.setContent(
          "M100,10 L100,10 40,180 190,60 10,60 160,180 z"
      );
      star.setStrokeLineJoin(StrokeLineJoin.ROUND);
      star.setStroke(Color.BLUE);
      star.setFill(Color.DARKBLUE);
      star.setStrokeWidth(4);
      return star;
    }
  
    private MenuBar createMenuBar(final Stage stage, final Group group) {
      Menu fileMenu = new Menu("_File");
      MenuItem exitMenuItem = new MenuItem("E_xit");
      exitMenuItem.setGraphic(new ImageView(new Image(CLOSE_ICON)));
      exitMenuItem.setOnAction(new EventHandler<ActionEvent>() {
        @Override public void handle(ActionEvent event) {
          stage.close();
        }
      });
      fileMenu.getItems().setAll(
          exitMenuItem
      );
      Menu zoomMenu = new Menu("_Zoom");
      MenuItem zoomResetMenuItem = new MenuItem("Zoom _Reset");
      zoomResetMenuItem.setAccelerator(new KeyCodeCombination(KeyCode.ESCAPE));
      zoomResetMenuItem.setGraphic(new ImageView(new Image(ZOOM_RESET_ICON)));
      zoomResetMenuItem.setOnAction(new EventHandler<ActionEvent>() {
        @Override public void handle(ActionEvent event) {
          group.setScaleX(1);
          group.setScaleY(1);
        }
      });
      MenuItem zoomInMenuItem = new MenuItem("Zoom _In");
      zoomInMenuItem.setAccelerator(new KeyCodeCombination(KeyCode.I));
      zoomInMenuItem.setGraphic(new ImageView(new Image(ZOOM_IN_ICON)));
      zoomInMenuItem.setOnAction(new EventHandler<ActionEvent>() {
        @Override public void handle(ActionEvent event) {
          group.setScaleX(group.getScaleX() * 1.5);
          group.setScaleY(group.getScaleY() * 1.5);
        }
      });
      MenuItem zoomOutMenuItem = new MenuItem("Zoom _Out");
      zoomOutMenuItem.setAccelerator(new KeyCodeCombination(KeyCode.O));
      zoomOutMenuItem.setGraphic(new ImageView(new Image(ZOOM_OUT_ICON)));
      zoomOutMenuItem.setOnAction(new EventHandler<ActionEvent>() {
        @Override public void handle(ActionEvent event) {
          group.setScaleX(group.getScaleX() * 1/1.5);
          group.setScaleY(group.getScaleY() * 1/1.5);
        }
      });
      zoomMenu.getItems().setAll(
          zoomResetMenuItem,
          zoomInMenuItem,
          zoomOutMenuItem
      );
      MenuBar menuBar = new MenuBar();
      menuBar.getMenus().setAll(
          fileMenu,
          zoomMenu
      );
      return menuBar;
    }
  
    // icons source from: http://www.iconarchive.com/show/soft-scraps-icons-by-deleket.html
    // icon license: CC Attribution-Noncommercial-No Derivate 3.0 =? http://creativecommons.org/licenses/by-nc-nd/3.0/
    // icon Commercial usage: Allowed (Author Approval required -> Visit artist website for details).
  
    public static final String APP_ICON        = "http://icons.iconarchive.com/icons/deleket/soft-scraps/128/Zoom-icon.png";
    public static final String ZOOM_RESET_ICON = "http://icons.iconarchive.com/icons/deleket/soft-scraps/24/Zoom-icon.png";
    public static final String ZOOM_OUT_ICON   = "http://icons.iconarchive.com/icons/deleket/soft-scraps/24/Zoom-Out-icon.png";
    public static final String ZOOM_IN_ICON    = "http://icons.iconarchive.com/icons/deleket/soft-scraps/24/Zoom-In-icon.png";
    public static final String CLOSE_ICON      = "http://icons.iconarchive.com/icons/deleket/soft-scraps/24/Button-Close-icon.png";
  }

  Well, it wasn't what I had to do today...

  A couple of minor changes first: I wrapped the StackPane in a group so that the ScrollPane component would be informed of these changes to the transformations, according to the ScrollPane Javadocs. And then I have to the minimum size of the StackPane of the size of the viewport (keeping centered content when it is smaller than the viewport).

  Initially, I thought I should use a processing of scale to zoom around the display Center (i.e. the point on content that is at the center of the display window). But I found that I still need to set the scroll position subsequently to keep the same display Center, so I dropped that and has been restored by using setScaleX() and setScaleY().

  The trick is to set the scroll position after descaling. I calculated the scroll offset in local coordinates, the content scroll and then calculated the new scroll values necessary after scaling. It was a little tricky. The basic observation is that
  (hValue-hMin) /(hMax-hMin) = x / (contentWidth - viewportWidth), where x represents the horizontal offset of the left edge of the display window from the left edge of the content.
  Then you have centerX = x + viewportWidth/2.

  After scaling, the coordinate x of the old centerX is now centerX * scaleFactor. So, just set the new hValue to the new Center. There is a bit of algebra to understand this.

  After this, panoramic moving was pretty easy :).

  import javafx.application.Application;
  import javafx.beans.property.ObjectProperty;
  import javafx.beans.property.SimpleObjectProperty;
  import javafx.beans.value.*;
  import javafx.event.*;
  import javafx.geometry.Bounds;
  import javafx.geometry.Point2D;
  import javafx.scene.*;
  import javafx.scene.control.*;
  import javafx.scene.image.*;
  import javafx.scene.input.*;
  import javafx.scene.layout.*;
  import javafx.scene.paint.Color;
  import javafx.scene.shape.*;
  import javafx.stage.Stage;
  
  public class GraphicsScalingApp extends Application {
    public static void main(String[] args) {
      launch(args);
    }
  
    @Override
    public void start(final Stage stage) {
      final Group group = new Group(createStar(), createCurve());
  
      Parent zoomPane = createZoomPane(group);
  
      VBox layout = new VBox();
      layout.getChildren().setAll(createMenuBar(stage, group), zoomPane);
  
      VBox.setVgrow(zoomPane, Priority.ALWAYS);
  
      Scene scene = new Scene(layout);
  
      stage.setTitle("Zoomy");
      stage.getIcons().setAll(new Image(APP_ICON));
      stage.setScene(scene);
      stage.show();
    }
  
    private Parent createZoomPane(final Group group) {
      final double SCALE_DELTA = 1.1;
      final StackPane zoomPane = new StackPane();
  
      zoomPane.getChildren().add(group);
  
      final ScrollPane scroller = new ScrollPane();
      final Group scrollContent = new Group(zoomPane);
      scroller.setContent(scrollContent);
  
      scroller.viewportBoundsProperty().addListener(new ChangeListener() {
        @Override
        public void changed(ObservableValue observable,
            Bounds oldValue, Bounds newValue) {
          zoomPane.setMinSize(newValue.getWidth(), newValue.getHeight());
        }
      });
  
      scroller.setPrefViewportWidth(256);
      scroller.setPrefViewportHeight(256);
  
      zoomPane.setOnScroll(new EventHandler() {
        @Override
        public void handle(ScrollEvent event) {
          event.consume();
  
          if (event.getDeltaY() == 0) {
            return;
          }
  
          double scaleFactor = (event.getDeltaY() > 0) ? SCALE_DELTA
              : 1 / SCALE_DELTA;
  
          // amount of scrolling in each direction in scrollContent coordinate
          // units
          Point2D scrollOffset = figureScrollOffset(scrollContent, scroller);
  
          group.setScaleX(group.getScaleX() * scaleFactor);
          group.setScaleY(group.getScaleY() * scaleFactor);
  
          // move viewport so that old center remains in the center after the
          // scaling
          repositionScroller(scrollContent, scroller, scaleFactor, scrollOffset);
  
        }
      });
  
      // Panning via drag....
      final ObjectProperty lastMouseCoordinates = new SimpleObjectProperty();
      scrollContent.setOnMousePressed(new EventHandler() {
        @Override
        public void handle(MouseEvent event) {
          lastMouseCoordinates.set(new Point2D(event.getX(), event.getY()));
        }
      });
  
      scrollContent.setOnMouseDragged(new EventHandler() {
        @Override
        public void handle(MouseEvent event) {
          double deltaX = event.getX() - lastMouseCoordinates.get().getX();
          double extraWidth = scrollContent.getLayoutBounds().getWidth() - scroller.getViewportBounds().getWidth();
          double deltaH = deltaX * (scroller.getHmax() - scroller.getHmin()) / extraWidth;
          double desiredH = scroller.getHvalue() - deltaH;
          scroller.setHvalue(Math.max(0, Math.min(scroller.getHmax(), desiredH)));
  
          double deltaY = event.getY() - lastMouseCoordinates.get().getY();
          double extraHeight = scrollContent.getLayoutBounds().getHeight() - scroller.getViewportBounds().getHeight();
          double deltaV = deltaY * (scroller.getHmax() - scroller.getHmin()) / extraHeight;
          double desiredV = scroller.getVvalue() - deltaV;
          scroller.setVvalue(Math.max(0, Math.min(scroller.getVmax(), desiredV)));
        }
      });
  
      return scroller;
    }
  
    private Point2D figureScrollOffset(Node scrollContent, ScrollPane scroller) {
      double extraWidth = scrollContent.getLayoutBounds().getWidth() - scroller.getViewportBounds().getWidth();
      double hScrollProportion = (scroller.getHvalue() - scroller.getHmin()) / (scroller.getHmax() - scroller.getHmin());
      double scrollXOffset = hScrollProportion * Math.max(0, extraWidth);
      double extraHeight = scrollContent.getLayoutBounds().getHeight() - scroller.getViewportBounds().getHeight();
      double vScrollProportion = (scroller.getVvalue() - scroller.getVmin()) / (scroller.getVmax() - scroller.getVmin());
      double scrollYOffset = vScrollProportion * Math.max(0, extraHeight);
      return new Point2D(scrollXOffset, scrollYOffset);
    }
  
    private void repositionScroller(Node scrollContent, ScrollPane scroller, double scaleFactor, Point2D scrollOffset) {
      double scrollXOffset = scrollOffset.getX();
      double scrollYOffset = scrollOffset.getY();
      double extraWidth = scrollContent.getLayoutBounds().getWidth() - scroller.getViewportBounds().getWidth();
      if (extraWidth > 0) {
        double halfWidth = scroller.getViewportBounds().getWidth() / 2 ;
        double newScrollXOffset = (scaleFactor - 1) *  halfWidth + scaleFactor * scrollXOffset;
        scroller.setHvalue(scroller.getHmin() + newScrollXOffset * (scroller.getHmax() - scroller.getHmin()) / extraWidth);
      } else {
        scroller.setHvalue(scroller.getHmin());
      }
      double extraHeight = scrollContent.getLayoutBounds().getHeight() - scroller.getViewportBounds().getHeight();
      if (extraHeight > 0) {
        double halfHeight = scroller.getViewportBounds().getHeight() / 2 ;
        double newScrollYOffset = (scaleFactor - 1) * halfHeight + scaleFactor * scrollYOffset;
        scroller.setVvalue(scroller.getVmin() + newScrollYOffset * (scroller.getVmax() - scroller.getVmin()) / extraHeight);
      } else {
        scroller.setHvalue(scroller.getHmin());
      }
    }
  
    private SVGPath createCurve() {
      SVGPath ellipticalArc = new SVGPath();
      ellipticalArc.setContent("M10,150 A15 15 180 0 1 70 140 A15 25 180 0 0 130 130 A15 55 180 0 1 190 120");
      ellipticalArc.setStroke(Color.LIGHTGREEN);
      ellipticalArc.setStrokeWidth(4);
      ellipticalArc.setFill(null);
      return ellipticalArc;
    }
  
    private SVGPath createStar() {
      SVGPath star = new SVGPath();
      star.setContent("M100,10 L100,10 40,180 190,60 10,60 160,180 z");
      star.setStrokeLineJoin(StrokeLineJoin.ROUND);
      star.setStroke(Color.BLUE);
      star.setFill(Color.DARKBLUE);
      star.setStrokeWidth(4);
      return star;
    }
  
    private MenuBar createMenuBar(final Stage stage, final Group group) {
      Menu fileMenu = new Menu("_File");
      MenuItem exitMenuItem = new MenuItem("E_xit");
      exitMenuItem.setGraphic(new ImageView(new Image(CLOSE_ICON)));
      exitMenuItem.setOnAction(new EventHandler() {
        @Override
        public void handle(ActionEvent event) {
          stage.close();
        }
      });
      fileMenu.getItems().setAll(exitMenuItem);
      Menu zoomMenu = new Menu("_Zoom");
      MenuItem zoomResetMenuItem = new MenuItem("Zoom _Reset");
      zoomResetMenuItem.setAccelerator(new KeyCodeCombination(KeyCode.ESCAPE));
      zoomResetMenuItem.setGraphic(new ImageView(new Image(ZOOM_RESET_ICON)));
      zoomResetMenuItem.setOnAction(new EventHandler() {
        @Override
        public void handle(ActionEvent event) {
          group.setScaleX(1);
          group.setScaleY(1);
        }
      });
      MenuItem zoomInMenuItem = new MenuItem("Zoom _In");
      zoomInMenuItem.setAccelerator(new KeyCodeCombination(KeyCode.I));
      zoomInMenuItem.setGraphic(new ImageView(new Image(ZOOM_IN_ICON)));
      zoomInMenuItem.setOnAction(new EventHandler() {
        @Override
        public void handle(ActionEvent event) {
          group.setScaleX(group.getScaleX() * 1.5);
          group.setScaleY(group.getScaleY() * 1.5);
        }
      });
      MenuItem zoomOutMenuItem = new MenuItem("Zoom _Out");
      zoomOutMenuItem.setAccelerator(new KeyCodeCombination(KeyCode.O));
      zoomOutMenuItem.setGraphic(new ImageView(new Image(ZOOM_OUT_ICON)));
      zoomOutMenuItem.setOnAction(new EventHandler() {
        @Override
        public void handle(ActionEvent event) {
          group.setScaleX(group.getScaleX() * 1 / 1.5);
          group.setScaleY(group.getScaleY() * 1 / 1.5);
        }
      });
      zoomMenu.getItems().setAll(zoomResetMenuItem, zoomInMenuItem,
          zoomOutMenuItem);
      MenuBar menuBar = new MenuBar();
      menuBar.getMenus().setAll(fileMenu, zoomMenu);
      return menuBar;
    }
  
    // icons source from:
    // http://www.iconarchive.com/show/soft-scraps-icons-by-deleket.html
    // icon license: CC Attribution-Noncommercial-No Derivate 3.0 =?
    // http://creativecommons.org/licenses/by-nc-nd/3.0/
    // icon Commercial usage: Allowed (Author Approval required -> Visit artist
    // website for details).
  
    public static final String APP_ICON = "http://icons.iconarchive.com/icons/deleket/soft-scraps/128/Zoom-icon.png";
    public static final String ZOOM_RESET_ICON = "http://icons.iconarchive.com/icons/deleket/soft-scraps/24/Zoom-icon.png";
    public static final String ZOOM_OUT_ICON = "http://icons.iconarchive.com/icons/deleket/soft-scraps/24/Zoom-Out-icon.png";
    public static final String ZOOM_IN_ICON = "http://icons.iconarchive.com/icons/deleket/soft-scraps/24/Zoom-In-icon.png";
    public static final String CLOSE_ICON = "http://icons.iconarchive.com/icons/deleket/soft-scraps/24/Button-Close-icon.png";
  }
  

• Some images are centered, but others do not, even using the same tag div

  I have a background image that does evolve upward and down to match the size of the browser, but I can't keep centered content. I have an image of the logo, below which is a container of text and below that is another image. The text container remains focused, but not the images - they move to the left, but with different proportions.

  www.ShredSkins.com

  Fair warning: the code corresponding to the index page and style sheet is really mixed up. I tried a lot of different things with different names (so I can easily go back to a previous combination) and when I get home from work index I can remove everything and do it cleanly.

  Thank you!

  Add this to your CSS code.

  IMG {max-width: 100 %}}

  Then, remove all the attributes height and width HTML of your tags.

  This will result in images that resize available.

  Nancy O.

• Difference between "Toggle Record" and "toggle / / folder.

  There are two commands different keys that can be assigned to the Publisher of key commands.

  • Enable/disable record (.)

  • / / Record toggle (*)

  

  What is the difference between these two?

  Also, what is the best way to access the logic Pro X 'in the manual of the depth?

  I find that the 'logic of aid' within the program is extremely limited or base. I almost find answers advanced in there and if I ago incomplete or very hard to find.

  Essential difference is that Record/toggle allows you to go in and out of recording mode without changing the mode of playback/record...

  Toggle / / folder

  If the playhead is stopped - rocking record will move you in and out of recording mode (without starting the registration process)

  If the read head moves - rocking record will pass you in and out of recording mode (keeping the playhead moving).

  So the foregoing you pop in and out of recording mode independent of the State of the playhead (i.e. order, reading, record)

  Record

  If the playhead is stopped - by pressing the folder will start recording.

  If the playhead is trying to record - pressing the record won't do anything.

• What kind of code do you use to switch to a new/next screen?

  Greetings,

  I worked with CC animate and a bit of ActionScript 3.0 for about a month as part of my study IT. As part of my final project for this course animate CC, I chose to create a Visual Novel game. Basically, the idea is that you can see a screen, you click an option to 'talk' (like "move to your home" or "the city") and clicking on an option translates in the transition to a new screen (with a House/town as a background image).

  Unfortunately, I don't have to do all assignments in the past involving "screen switching", so I have no idea as to what kind of code I need to make this work. Google for it, without success. So now my question is, what kind of ActionScript 3.0 code/functions/etc. to apply to just "switch to the next screen" host in a selfmade in CC game?

  Thanks in advance,

  Sander

  I assume you are using the calendar to develop each of these individual screens. You probably use the stop(); order to keep the playhead on the frame where the first decision point, the screen of your option. You will need for each of the options create a badge and join some Actionscript to the keyframe where the point of this decision.

  Here's a good tutorial for this kind of thing: creating a site Flash (AS3 Version)

• Audio playback video clip is replayed continues

  I have spent the better part of the day looking for a solution to this, but have had no luck. Let me see if I can explain this clearly. I created a flash file that contains audio. When I pulled out the swf file, or do a test and rewind the video, the original sound continues to play and a second instance of the audio begins to play again at the beginning. This translates into two instances of audio that plays at the same time and out of sync. Whenever the clip is rewound an extra audio instance is played on top of what is already happening. This occurs if the audio is embedded in a flv (the original way, he we was sent), or if the audio is on its own layer. The audio is inside a movie clip but the problem remains even when the audio is the only thing in the swf file. Finally, the SWF will enter Adobe Captivate where we have a widget set to replay the slide. It works perfectly when audio is imported separately in Captivate.

  I think that what I have to do is call the clip, and then remove it when we go to replay the clip. I'm not a coding guy so I have a hard time knowing if it is the right approach. I hope that the answer is easier than the explanation.

  We use 7 Captivate

  CC, 6 Flash Flash

  Coding should be AS3

  Thanks in advance.

  What you have are two different versions of the same problem in Flash. A sound will continue to play until there finishes or it is said to stop. Video with sound will do the same thing. The solution is to tell the audio to stop playing, or in your case, tell the video to stop playing when you want is more around. If you play the flv file in an flvplayback component, do not forget to enter a name for the instance of the component and then say this instance to stop playing when you move away of the it in the timeline panel.

  If you want to play the sound in a layer, then you want to set property of Sync of the soundtrack 'Stream '. This will keep the playhead to play new instances of the sound, he will leave, but he will not play one copy on the other. If you want to stop a sound playing in the timeline layer, you will need to use "SoundMixer.stopAll ()"; This stops all sounds playing. When you play a sound in a layer, you have no direct control over it, so you can tell only all sounds currently playing to stop.

• button to show / hide more than once

  Hello

  I have a small question.  I created a "drop-down menu" using a button and advanced actions: when clicking on the button 1 displays the menu options and an identical button 2 (hide button 1), by clicking on the 2 button hides the menu options and original watch key 1 (2 masking).  It works brilliantly and looks really good.  However once I did this and click again on the original button 1 nothing happens.  I set the properties of the action to the infinite, but he still let me do that once a button (on the same blade).  I also tried to put a number of attempt in but still not working.  Can you please specify?

  Thank you

  And the buttons are not in the same place? They have their point of suspension at the same time? Normally, the standard actions keep the playhead is stopped (which is not the case for conditional actions).  The other objects, you show/hide are not interactive? Because if they are interactive, they can cause the playback head to move. Here are the screenshots of the example of the little that I have created, firstly the chronology:

  

  You see two buttons with their break at the same time (two vertical lines). There are two legends of (non-interactive) text which are hidden initially, TC_Off and TC_On. I added another legend text to follow the read head (TC_Debug), it shows the rdinfoCurrentFrame of system variables.

  The buttons trigger those advanced actions (impossible to insert screenshots, so I'll write them):

  Bt_On

  See the baton

  See the TC_Off

  Hide TC_On

  Hide BtOff

  Bt_Off is similar, simply reverse the show/hide

  It works perfectly, the debugging text caption continues on the same chassis (suspension point) that allows you to repeat her clicking as many times as you want. So I suspect that you have something on the menu that moves the playhead in the inactive part of the button.

  Lilybiri

• Add the hyperlink to open a falsh movie

  Hello

  In Captivate 4: I am looking for a way to add a link to one of the slides that will open a URL.

  Is it possible to do?

  Thank you

  Merav.

  Hi Lilybiri

  The scenario seems to me that the object button is pause the slide before click, no areas? So if the blade is paused and the click boxes don't release the break when they click, by disabling the option "Continue", would not keep the playhead paused?

  Note that I didn't set up a corresponding scenario to fully test, but it seems to me that this is how it would work.

  See you soon... Rick

  Useful and practical links Captivate wish form/Bug report form Certified Adobe Captivate training SorcerStone blog Captivate eBooks

• behavior in a single layer operates automatically to any layer

  I hate to be a pain, but I'm really learning a lot of following tutorials and this problem is recurring with every tut I try...
  
  I followed this tutorial: [L = http://www.entheosweb.com/Flash/preloader2.asp]
  
  I'm stuck on this (again at least 17 times after verbatum but something is wrong):
  
  Now, return to your bar layer, move the rectangle to the left, as shown below
  
  
  Go to the 40 frame, keeping the playhead on frame 40, pull the rectangle on the other side, as shown below
  
  My problem is that when I move in the framework, it moves also in the frame of 40... and when I move it to the other side in the frame of 40 and return the frame 1 is no longer in the original position... I can't get my head around that! I use Flash 8 Professional if that's any help!
  
  I'm not, insertion of images and keyframes as the tutorial says...
  
  
  

  I FOUND IT! I was so stuck on following the tutorial I didn't there might be a mistake... I don't know if it's just because I have a newer version of flash than what they used for the tutorial, but instead to insert a farm at 40, you must insert a KEYFRAME... so I fixed it myself, but read my post really helped here!
  don't want anyone to rub the wrong way with all my stupid questions! :)

• Control the Flash simple Question?

  I have a little problem with the control of a flash sprite.
  
  I have a type of "photo gallery" of the cast member Flash where users can select an image. The problem is, it's when they move to the next image of the screenplay for Director and then return to the framework where the Flash Gallery Flash sprite sprite returned to the first image. I want that the user know what 'image' has been selected if they return for this frame in the director movie, basically keeping the playhead of the cast member flash where it is. Is there a way to get a Flash cast member to remain on the framework and not 'reload' to the first image?

  the flash sprite

  global curfrm

  on mousedown me
  curfrm = sprite (me.spritenum) .frame - is the real image of the flash sprite
  go to "your target."
  end

  your sprite of target, wherever you would be back

  on mousedown me
  go to "corresponding to your flash sprite.
  Sprite (your flash sprite) .gotoframe (curfrm)
  end

  Sayeg5