Keeps freezing blackBerry Smartphones bb

Similar Questions

• 9810 keeps rebooting blackBerry Smartphones blackberry torch

  My 9810 keeps restarting and I can't seem to connect to the desktop software. He gets a point and I get a white screen and it restarts again.

  operating system is OS7.0...

  From the restart when he was on the charger I add me some contacts from my sim card and it frozen screen. After that i could not get it working again... I have not much apps addes. most of my stuff that I keep on my memory card...

  You are able to reboot your device in SafeMode as shown in KB17877?

  I guess, because it is taken in a reboot cycle, when you connect to the desktop software it does not have a stable connection to reinstall your software?

  If this is the case, remove the battery and keep it off when you connect to the desktop software. You will get a pop up that the device cannot connect and there should be buttons retry, update and cancel. Select Update and you will then be able to reinstall the latest version of the device software.

  When the load progresses, you will see a step that says "waiting for initialization of the devices '. At this point, insert the battery and recharging must complete.

• Keeper password blackBerry Smartphones missing after upgrade to version 6.0 bundle 3049

  Hello

  .

  I had a problem with my BB Torch, in which the camera starts up.  On the advice of the support of the people, I was able to start it in safe mode.  However, he lacked the App World - and so I couldn't update any application, or install a new one.

  .

  I took a backup and updated the software for the device and restored all the data.  Now, the App World is here, but the password keeper is missing.

  .

  According to the other instructions in the forum, I tried to restore it in the Desktop Manager, but it does not show such an option for password keeper.  Please help - I need to use the password keeper.

  .

  THX!

  Install both, this order please:

  1. First install the desktop software, but do not run it yet (it could offer at the end of installation)
  2. Then install the downloaded BB OS package of Bell (which kind of changes the Desktop software to make it specific to your BB)
  3. Now run the Desktop software and connect your BB to the USB cable when prompted. If she does not invite (he cannot, depending on certain factors), then just connect at any time after the Software Desktop is running.
  4. Now, open the Applications section of the Desktop software and, if all goes well, the first elements will be as I mentioned and password keeper will now be in the list, you can install

  Good luck!

• BlackBerry Smartphones BB Bold 9780 guard freezing, networks keep falling, drains the battery faster

  Since I upgraded to surveys last BBM, where voice chat has been installed, my phone freezing guard and the two mobile network and wifi connection keeps failing. My phone is set to favorite wifi. I also find that my battery drains faster since the update. I'm a fan of BB, but it's very annoying. Is it possible that I can remove voice chat? I'm even not use because it is not working properly, it's worse than Skype when I talk to my sister at home. This could be due to network connection in my home country. Is there a way that I can return to the previous version of BBM? Is it possible that the upgrade is causing my mobile recent misfortunes? Help, please! I had already called my network provider, but everything they have done has not worked. I'm about to throw the phone out the window! Help!

  Hey SavvyBB,

  Welcome to the forums.

  In this case, we can try to reload the software on the BlackBerry® smartphone to make sure she is running the most recent version and there is no problems with the operating system.

  Here's how to make a backup of your BlackBerry smartphone http://bbry.lv/oPVWXc

  Once you have saved your BlackBerry smart phone, please follow the link below to complete a clean reload of the BlackBerry smartphone software.

  Link: http://www.blackberry.com/btsc/KB03621

  Once completed test and go ahead with a selective restore, here is how to restore http://bbry.lv/qgQxLo

  Let us know how to get you out and if you still have problems after doing the above.

• Why my Curve 9300 blackBerry Smartphones keep freeze

  Why my BB Curve 9300 keep freezing?

  It freezes all the time because you're out of the application memory.

  I recommend you to install BlackBerry Desktop Software and do a full backup of the device. Then do a security Wipe. You can do the wipe by going into Options and type security wipe in the search bar. Do not include the media card, but include 3rd party applications. You can install those later via BBWorld.

  When it's done, you can only restore the databases that you really need like e-mail, calendar, contacts, etc.

  When you are all done to ensure that the media are registered in the media card. I recommend getting a much larger map in order to have room for photos and videos. You do not want the data stored on the device memory.

• BlackBerry Smartphones Blackberry 9300 Trackpad keeps freezing! :(

  Hey guys, so I have a curve 9300 and the stupid trackpad keeps freezing: '(im obtenir frusterated jolie parce que je ne peux pas quoi que ce soit dele de tout avec mon téléphone et sa commence à vraiment me piss OFF. does ne1 d'autre ont le même problème??)

  and how to fix this without having to send it? please help

  Hi there cherylakashortee,

  Out of curiosity, have you tried a battery pull yet? While the phone is turned on, just remove the battery, for good measure, wait one minute, then reinsert the battery and wait for the device to reboot.

  Who help me? If not, let us know what operating system you use on your phone. You can get this info under Options > device > on Versions of the device, or by typing "myver" in a text box (e.g. e-mail or BBM).

• My BB Curve of blackBerry Smartphones always freezes...

  I always use my phone, the bb curve 9320, and now it always freezes. whenever I have send messages important, tweets, and surfing the internet I end up still waiting for black "timer" to be gone so I can continue...

  I checked the app storage etil still 21 mb.

  What should be the problem? I would really appreciate the help. Thank you!

  Hello! Have you done a hard reset?

  A hard reset is similar to rebooting a computer that is not responding. A hard reset shut BlackBerry applications and restarts the BlackBerry smartphone operating system reboots the hardware components of the BlackBerry smartphone, including the wireless transmitter/receiver.

  Note: A hard reset deletes all settings or the data on the BlackBerry smartphone.

  To perform a hard reset, follow these steps:

  1. Turn off the BlackBerry smartphone.
  2. Remove the battery.
  3. Reinsert the battery.
  4. Wait until that smartphone BlackBerry start.

  In addition,

  Confirm that all installed third-party applications are approved for the device

  Make sure that all third party applications installed on the BlackBerry smartphone are approved for the device. If the problem persists, remove third-party applications to ensure that they do not affect performance.

  And don't forget,

  Optimize flash memory

  You can keep the smart phone BlackBerry operating at peak performance by maximizing the available flash memory. Increase the amount of available memory on your BlackBerry smartphone by performing the following tasks:

  1. Add a memory card
  2. Remove unused languages
  3. Delete call logs
  4. Remove the sample video
  5. Empty the Cache and Cookies in the browser
  6. Delete rarely used applications
  7. Delete old data

  Keep us informed! See you soon

• BlackBerry Smartphones BlackBerry 9790 keeps restarting

  Please I a BlackBerry 9790 I just got as used just not up to months past but it maintains itself frequently reboot at a time I thought it was rhe battery I bought a new but it keeps doing the same thing. Please kindly help me thanks

  Hello and welcome to the community!

  I recommend that you try to start safe mode:

  • KB17877 How to start a smartphone BlackBerry in Mode safe

  It will take several attempts to get the combination of keys ESC (press/release/hold) OK, so be patient. When properly in Safe Mode, see what happens.

  If the behavior continues, then well... think what happened just before this behavior started? A new application? An update? A theme? Something else? Think carefully that the slightest change can be causal... and try to undo all that was.

  But if the behavior continues mode without failure, you may need to consider more drastic measures - WIPE, OS Reload, BBSAK Wipe/Reload and the process of reloading OS 'skeleton '. To prepare, you should be sure that you have a full backup of your PC... Please see the Backup link in my sig auto on this post for instructions.

  You may also use these tips:

  • KB10144 How to force detect the BlackBerry smartphone using the Application Loader
  • KB27956 How to recover a BlackBerry smartphone from any State
  • http://CrackBerry.com/BlackBerry-101-lecture-12-how-reload-operating-system-nuked-BlackBerry

  Good luck and let us know!

• BlackBerry Smartphones Pls help me my 9860 touch hangs when boot nd the system does not recognize the usb port when it freezes on startup

  Recently, my 9860 touch starts not finished... It stops at halfway when startup nd freeze... 2ndly starting my system recognizes usb d port, but when it comes to where it stops booting, the system doesn't see it me collapses more so to reload the software

  Hello Dtobs007

  Welcome to the community

  I recommend you try first method Mode without failure. Article ID: KB17877 How to start a mode BlackBerry smartphone without failure.

  Another thread explains how to fix this problem, for your reference.

  By JSanders. http://supportforums.BlackBerry.com/T5/BlackBerry-torch/BlackBerry-torch-9860/TD-p/2597381

  See you soon and good luck.

• BlackBerry smartphone accessing password Keeper data using office software

  I recently had a pressure of crack in the LCD screen on my Curve 8310.

  I need to access my passwords stored in password keeper, however given that the LCD is toast, impossible to read anything on the phone.

  I'm waiting on a replacement LCD screen, but need to pass, as soon as POSSIBLE.

  Are there programs to display the program on the pc?

  I tried a solution that actuall work, so I thought I'd post in case anyone else has this same problem.

  I had previously saved data for my Blackberry Curve 8310 using the office management software.

  I downloaded a Simulatr for my Curve 8310 and installed the software.  I found the Simulator to the BlackBerry Smartphone simulators - URL

  http://NA.BlackBerry.com/eng/developers/resources/simulators.jsp

  Once the program was installed, I ran the program, which shows a picture of the phone.

  I started my office management software.

  Now to back in the Smartphone Simulator

  In the menu, I selected 'USB cable connected' which simulates the connection of the smartphone.

  Once I did this, the office management software prompted me to create settings then phone again.

  Once I implemented this new virtual phone, I restored my backup from the virtual desktop management software to the new.

  I could then use the mouse to go to the password manager and open the program.  It prompted me for my password and all data appeared.

  Hope this helps someone else.  Good luck.

  Mark

• BlackBerry smartphone Curve 9360 contstanty keeps restarting

  Hello

  I took my phone to use it, and it comes from the reboot for no reason. I had not downloaded something or abandoned or nothing. Now he constantly restarts, stays on for 5 seconds and restarts again. I tried to remove the battery, sim etc, nothing works. In addition to the update of the OS, is there else I can do nothing on what to do, just to keep? I can't event keep long enough to upgrade the operating system?

  Thank you

  Hi KylaB

  If your device is not responding Mode safe then had to force the detection of your device by using desktop software preconfigured to load the operating system even once and you will lose your data in this process, I hope you have your past Backup.So, please follow the Knowledge Base to recover your device.

  KB10144 How to force detect the BlackBerry smartphone using the Application Loader. 

   

  Please try it and let us know.

  Prince

  ______________________________________________________________________

  Click 'Like' If you want to thank someone.

  If problem resolves mark message (s) as a 'Solution', so that others can use.

• Transfer of blackBerry Smartphones to password Keeper, Memo Pad, and Photos of Bold 9700 new curve 9320

  Hello

  I don't have 'Outlook' put in place on my PC, or I really like.

  Is it possible to synchronize the password Keeper, Memo pad and the Photo of my current Bold 9700 to my Blackberry Desktop Manager?

  Then I can transfer these items to my curve 9320.

  Thank you.

  Tamara133 wrote:

  Is it possible to synchronize the password Keeper, Memo pad and the Photo of my current Bold 9700 to my Blackberry Desktop Manager?

  Then I can transfer these items to my curve 9320.

  Hi Tamara133

  Welcome to the Forums of the BlackBerry Support

  If you stay at 9320 curve then more easiset way to do this is an Assistant to switch device using Desktop software.

  KB23677  :  How to switch using BlackBerry Desktop Software devices.

   

  Or if you want to perform a selective restore to your new 9320 then first do a full backup of your old 9700 using desktop software. Once you have your backup connect your 9320 and run the software, select the device from software > restore > data choose selected since your last backup you did > scroll down the list and select only the password keeper and memo key data in this list, then click on apply.

  Or rfer to this Article:

  KB03953 : How to back up and restore data to a new BlackBerry smartphone

• BlackBerry Smartphones Blackberry storm freezes

  I installed a theme on the app world and it slowed down my storm I turned it off and took out the battery... .bit now it starts just to the top of the bar is fully charged and that's all that it freezes... I don't know what to do... .a please help me

  • Start the machine Mode without failure.
  • Go to Options > Advanced > Applications and remove this theme.
  • Restart in normal mode.

  ***********
  Article ID: KB17877 how to start a mode BlackBerry smartphone without failure http://www.blackberry.com/btsc/KB17877

• My phone blackBerry smartphones keeps restarting

  Can someone help me please? I downloaded the latest version of BBM lately and my camera has been rebooted since then. It restarts again and again, as happens in halfway, then a white screen appears and then it restarts again. I tried to start in safe mode, but that has not worked. Help, please

  Hello and welcome to the community!

  About your attempt to fashion without failure, please specify:

  • She received mode without failure, but the problem persists?
  • Received not even in Safe Mode? If not, how many times did you try (it may be difficult to get the distribution right)?

  You may also use these tips:

  • KB10144 How to force detect the BlackBerry smartphone using the Application Loader
  • KB27956 How to recover a BlackBerry smartphone from any State
  • http://CrackBerry.com/BlackBerry-101-lecture-12-how-reload-operating-system-nuked-BlackBerry

  Good luck and let us know!

• BlackBerry Smartphones built in storage media errors, not now restart...

  During the last two weeks, I received several cases where I received

  the following error message: "built in storage not accessible due to a detected errors. You want to repair? »

  
  I said yes and he fixed the problem.  Yesterday, I sent a BBM message and the phone reset... on suddenly it reboot only gets 3/4 of the way through the startup process (stops under the 1 'r' in the Blackberry logo).

  I tried a multitude of things I've seen on many forums, including let it stand all night with the battery, try to start in safe mode (which I never could get it to do).  This morning, it does the same thing.  I found a post that suggested to reformat the internal memory, which I should have done when I had questions.

  Is it possible to get this reformatted internal memory if the phone does not start?  Any suggestions would be helpful.  I will ask a new phone of my business, but know that I won't get it until tomorrow... so I'm willing to try anything to make it work again (today).

  P.S. Yes, I'm one of those guys who will lead to 10 miles around traffic stopped, just to keep moving! ;-)

  Hi chmberry

  That's what I set my phone freeze (9860). By JSanders.

  (1) make sure that you have Blackberry Desktop Manager installed.
  http://NA.BlackBerry.com/eng/services/desktop/
  (2) on your PC, go to start > run and copy and paste the following line exactly (i.e. with quotation marks):

  'c:\program files\common research in motion\apploader\loader.exe' /nojvm

  (3) the Application Loader Wizard will appear - click on "next".
  (4) in the ' connection: ' drop-down menu, you should see "USB - PIN: UNKNOWN". Click on the button "next".
  (5) you should see a list of applications ready to be installed for your Blackberry. Press Next and finish, and that you are well on your way to get your Blackberry to life. Congratulations! Just unplug and let the process finish completely.

  NOTE: If you do not display the list of applications mentioned in step 5 and instead to see the message "the Blackberry Desktop Software has no Blackberry Device Software for the device you have connected to the computer. Contact your wireless service provider or system administrator', then you must download the Blackberry operating system for your support and your device.

  BlackBerry Device Operating System downloads: http://www.blackberryforums.com/blackberry-device-specific/
  Simply select the model of the device in the list and download the latest version. Install this download and follow the steps above again and you should be on the right track.

  *****************
  IF the above does not work or help, you need to use JL_Cmder to wipe the device and then load the operating system on the device. Follow the instructions here:

  Download JL_Cmder http://www.blackberryforums.com/rim-software/18789-jl_cmder.html
  or download BBSAK http://bbsak.org/download.php

  If JL_Cmder does not work, you can try this:
  KB10144, http://www.blackberry.com/btsc/KB10144
  and this: KB20371 http://www.blackberry.com/btsc/KB20371

  Additional information:
  http://www.BlackBerry.com/BTSC/KB24395 "Error 523", "App Error 523", or "JVM 523" is displayed on the BlackBerry smartphone

  Item number: http://www.blackberry.com/btsc/KB10144 
  KB10144 How to force detection of the smartphone BlackBerry using the Application Loader

   

  Good luck.