Keyboard does not just after all top coffee spill

Similar Questions

• End of 2012 iMac keyboard does not respond after sleep

  I have an iMac late 2012 and my keyboard does not respond after that lay down the computer.  When I type the password box is very slowly filled with random letters that are not my password and hit enter just adds another letter.  In my view, that it is a common problem that I am many have known for a few months.  Is there a solution to this I have reset PRAM and SMC, and no work.  It's very irritating and I hoped with every update from El Capitan, this would have been fixed, but not joy.

  I don't know about "modern" Mac and OS X versions, but on my old Powerbook / Tiger awakened from his sleep, it was necessary to 'click' somewhere (I clicked on always in the password field) before the same keyboard would meet all

• Keyboard does not work after authentication on the RDS Session host

  When you connect to the RDS through the access portal or app keyboard does not work after authentication on the RDS session host. Offline authentication works very well, past will guide you to the RDS host, then when you try to reset your password, the keyboard does not work.

  Has anyone else had that... ?

  Options (some better than others!) are:

  1. move all MS applications seamless

  2. have an application named "Reset your password" (or similar) which uses MS Seamless.then you can leave other applications, as they are

  3 disable authentication carried forward and implemented our service reset password instead so people reset their password before can connect you.

  4. use the full desktop instead of transparent

• Bitmoji keyboard does not work after last update iOS 10

  My Bitmoji keyboard does not work after that I updated to iOS 10 update. I have no idea why, my friends Bitmoji keyboard works fine after that she has updated her phone and mine does not work so I was wondering why. It worked perfectly fine before I upgraded my phone. I was wondering what to do.

  the same problem. He repeats to me go to keyboard settings and make sure that it says allows full access to Bitmoji and it does. Should not have upgraded to iOS.

• Equium M50-235: the keyboard does not work after upgrde memory

  I just did an upgrade memory on my laptop using the second slot located under the keyboard.
  However, as I was putting the keyboard at the rear, the ribbon cable has pulled away from the motherboard and even if I pushed
  Reconnect and fixed with the clip, the keyboard no longer works.

  Is there a service manual I can get hold of someone know what could be the cause of the problem?

  Thank you!

  Hello

  First of all, once you unscrew the keyboard, open the clip that secures it in place and reinstall the keyboard by ensuring that it is completely down. After that, now the flat cable in place, close the clip. Then, make sure that it is not lost and that it is seated correctly. Then turn on the laptop and see if it works. If this is not the case, try an external keyboard. If an external keyboard does not work, the keyboard on your MB controller is dead and you need a new MB. If an external keyboard works then your keyboard is dead, or the connector on the MB is dead. Best way to test is to try the first solution. If it doesn't work, take it to an ASP so they can try another keyboard for your laptop. Good luck.

• Trackpad and keyboard does not work after upgrade to Windows 10

  Trackpad and keyboard do not work after the upgrade to Windows 10 in Boot Camp on a MacBook Pro in early 2011. So, I'm unable to enter password. How to connect? Can I go back to Windows 8?

  1. you can turn off your Mac and your power it back up and hold the Alt/Option key.

  2. you can also run the following procedures to restore the OS default.

  3. If you use a Mac 2010 to run W10, officially Apple does not support the combination. Older than 2012 Mac is not supported for the W10.

  4. Please see also Boot Camp: the operating system default value .

• Satellite A665-S6086 - keyboard does not work after the outpouring of fluid

  I have a Toshiba Satellite A665-S6086 laptop. A couple of months, I spilled the zeroth power and he went on the keyboard. I'm sure that some went through it as well. The computer turns now and I can use an external mouse and external keyboard. Nothing on my keyboard does not work as well as the mouse. I can't go on the internet due to not being able to use the F8 key so.

  The only key/button that works is the power button. The dvd/cd drive works.
  Help, please.

  The external key board I use has no FN key. a f1 to f12, but when I hit the button on the external key board f8 nothing. Please help me get internet light somehow.

  Thank you

  And what kind of help do you expect now? What can we do?
  Why you n t fix it and be happy with the new keyboard?
  How long you want to use your laptop in such a State?

  Contact Toshiba service, let them swap keyboard and clean your laptop. OK it's a bit chilly but you'll well workbook again.

• Keyboard does not work after installing Vista

  I loaded window vista and since my keyboard does not work, tried unistalling with no luck. who can help?

  Hi funminey,

  Please see the following article some troubleshooting on your question:

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• keyboard does not work after sleep

  I have a light keyboard Logitech model Y-UY95. When the awakening of the mode standby the keyboard does not work.  Anything can be typed. I have to restart Windows 8 and then it works again.

  Had a similar problem on a HP Elitepad 900 go to sleep and not waking up... update the firmware/bios fixed it.  This known problem when I called HP, was not documented any wher however

• Keyboard does not work after windows update

  The keyboard of my laptop S series suddenly stopped working after that she completed an update of windows. Another strange thing is that the wireless only turns off even when the laptop is turned off. Everything else seems to work fine except for two things.

  First thing I did was to restore the system back to before the update of windows, but nothing has changed. Then I tried to uninstall the keyboard driver then by restarting the computer, after which it automatically reinstalled the driver but the keyboard still did not work.

  Then I "refreshed" system, but nothing has changed then either. And finally, I reset the factory settings and for a little while, the wireless light turns off, but then he came back even if I had not turned on the laptop. (Update: I just changed the laptop and the wireless light disappeared so... If all goes well he will not return as a sign of improvement.) There was no change to the keyboard.

  Additional details on my laptop that may or may not have something to do with the problem:

  It is currently running Windows Pro 8 on a 64 bit system and is less than a year.

  I accidentally spilled tea really diluted on the laptop a month ago, but the laptop was working again fine until windows update a few days ago. There is no significant problem caused by the spill other than a few sticky keys who take off on their overtime and that the sensors of the keyboard backlight no longer works correctly.

  Any advice on what else I might be able to try to try to again take the keyboard in a usable state would be great.

  Hi rhel!

  If the keyboard still does not work while in the BIOS, then it means that you have here a hardware failure, and the only way to solve that is to have the repaired computer. You can visit this page to start the repair process.

  -Tim

• On NEW laptop keyboard does not work after that the screen keyboard has been activated and then deactivated.

  Look at my friend got a new laptop and went through the whole upward. the on-screen keyboard has been activated which invalidates the real keyboard when the on-screen keyboard has been disabled the real keyboard has NO return. If this is a bug... Fix it. This is not a driver issue, it is not a user error. Stop giving people answers, trying to pretend like it's not not the OS when most people already know that it is.

  I'm sorry, but I didn't not new meant only one day.  And when I got my new laptop, one of the first things I did was to create a point of files, even a day later I had a restore to use - point and that was possible here as well.  I'm sorry it wasn't the case.

  If the system restore option is not available, do a startup repair, boot from the disk Installation of Windows Vista genuine (or one that you can borrow from someone) or a recovery disc.  Here is the procedure: http://www.bleepingcomputer.com/tutorials/tutorial148.html.  You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.

  If you do not have a floppy disk, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD.

  If this does not work, you can try to go into the BIOS during the startup (the key appropriate to push appear on the screen to enter the boot menu or boot installation - try them both in turn if both appear. It is possible that the BIOS contains an option to disable the keyboard (which may have been activated by the keyboard on the screen but not changed when disable you the on-screen keyboard) and you may need to re-enable manually.  There is a slight possibility, but it is an option to try.

  Another option to try is to set up a new user account that has never used the keyboard on the screen and see if the regular keyboard works when you connect to this account.  If so, you can simply treat the original as a corrupt account account and use the following procedures to complete the transfer.  To fix this use http://windows.microsoft.com/en-AU/windows-vista/Fix-a-corrupted-user-profile.

  I hope that one of these aid procedures.  I'm sorry if they seem to 'generic', but we do not really know what is the problem - especially since the system is new.  We try and identify the cause and fix the problem at the same time using the procedures available to us.  I suspect there's a registry tweak will correct this problem, but I went through the whole registry, and although I found several referencers keyboard, I could find no which seemed to control or not activate the main laptop keyboard (though it has been in one of the entries that has been encoded in binary that I couldn't read).  It's possible someone who knows more about the registry will respond to this issue with a proposal to amend (or perhaps another solution).

  I hope that one of the solutions I proposed works.  Please post back in all cases we will know whether or not to continue searching for an answer.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Keyboard does not work, after I login on the desktop.

  Original title: my keyboard appears in the devices, but must not work.i use the on-screen keyboard to type

  under devices it says it's working properly, but I can't type top .the keybord does not at all, he's dead.

  What happens when you try a different keyboard?

• line of numbers under the function keys keyboard does not work after windows upgrade

  Upgrade from Windows Vista Home Premium 64-bit window Ult 64 bit. Line of keyboard under func keys works not just if online using Windows Explorer, Firefox Safari n - numbers don't work - some type; other type letter k; with the SHIFT key, signs and symbols, type anything. I can get the numbers of t using my keypad and numlock. I have tried 3 keyboards.  One was a Microsoft USB 4000 ergonomic keyboard brand new and it had the same problems.  My keyboard USB wireless transmitter had the problem too.  All have the same problem. The keys are correct by using Word, Wordpad, etc.. Quick test repetition key online as well as the keys were all ok then.

  This started happening immediately after I upgraded to windows 7 ultimate.  I use a desktop HP Pavilion a6667c with 8 GB of RAM and the latest updates available for windows ultimate.   The problem occurred before and after the upgrade to service pack 1.   I noticed other people on the web posting on this problem too.    I got no error message when using Vista Home Premium 64-bit version and had installed all the latest updates him as well.

  The only solution I found to this problem is to build me a small table of characters and symbols, I can't do it, and sticking them in when I am online using one of the three browsers I use most often.   I looked at my keyboard settings and changed back and forth between American and British English British without any result.

  I'll post my problem of keyboard on HP forums as well.   Thanks for any help anyone can give me or leads.   Somewhere, I think that it is a simple problem to solve, but I searched and searched and browsed and traveled for several days to find a lot of people who have this type of keyboard problem, but no solution yet.

  I was able to solve the problem on my computer Microsoft Vista but uninstalling constant guard I had downloaded and installed with free Norton from Comcast. I got this tip on another thread and after followinging their advice, I was free to use my line of numbers/symbols of the keys even once! I was able to close my copy of the email and the character or symbol and the last sheet in Word.

• Muse does not just after the launch of the program

  I recently bought Adobe CC, and I try to set everything up. All programs seem to work, with the exception of Adobe Muse CC 2014 on my desktop, it seems to work fine on my laptop, however.

  I run the program via a shortcut on the desktop that is related to the "Muse.exe" file in my directory of Adobe's Muse. The program launches and goes through the initial loading screen that all the programs before the interface adobe user opens without any problem. He then gets to the homepage where it says create, new features, Ect... and the Welcome screen never loads, there's just white, and moments later the program will then is unresponsive. The only way to close the program is through the Task Manager and ending the program.

  I try to run the program on Windows 7 Pro 64-bit Service Pack 1, 16 GB ram, Intel Core i7 2600K, NVidia GTX 580.

  So far, I signed out/in grace to the application cloud creative to try to reset my login. I thought that maybe it just has not activated properly, how ever when I reconnected and launched Muse he asked me to check my login and then started the program with exactly the same problem. Then, I uninstalled the program and reinstalled and rebooted the computer without success. Then, I updated all the Windows updates, verified that the firewall is not blocking the program and then restarted my computer several times, which does not solve the problem. Then, I disabled my antivirus and turned off the firewall and attempted to launch without success.

  At this point I don't know what to do, I find it strange that every other single program launches properly with the exception of the Muse. Y at - it a specific update, I'm missing somewhere? Is their some other software or update, I need to start the Muse? Does anyone else have this problem? Help...

  Gaurav.Sharma - Muse CC (2014)

  I got the program working well, how ever it was especially by accident. I left him unresponsive open the program by accident and after about 15 minutes, I received an error message of timeout of script that displayed. He asked if I wanted to stop the execution of the script and I clicked Yes. After clicking Yes, the Welcome screen again would show not do anything, but I could now close the screen of welcome and access Muse. I closed the program, then reopened to see if the problem occurs again, and he did. Once more, I waited 15 minutes, got the script timeout error, stopped the script and could then access Muse again. This time, I consulted the Preferences screen and then disabled the Welcome screen on start up. Yet once again, I closed and reopened the Muse, however this time Muse started instantly.

  The home screen is not important for me, and I honestly don't care if it appears when I run the program, how ever I am curious to know why I have a problem with the Welcome screen on only the program of Muse. All other welcome screens seem to work perfectly well.

• Keyboard does not work after automatic update

  I have a HP Pavilion g6-2293sa Notebook PC, which itself updated automatically last week and thus the keybard has stopped working completely.

  I have reset the PC to an earlier point of time, but that did not help.  Help topics in HP suggest to uninstall my River of keyboard, which I did, and then by downloading "original drivers" - but this does not come up as an option on the download page.  Similarly, there is no update available under the link of the driver - keyboard, mouse and input devices .

  It feels like this should be a relatively simple download, but maybe I just can't find the right method?  I would be extremely grateful for any help or advice!

  Thanks in advance.

  Hello

  The keyboard driver is actually provided by the operating system, no additional download is required - try the following.

  Shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Start Notepad and let Windows load completely - any changes?

  If this isn't the case, restart the laptop and tap to the ESC key, once he starts to restart to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Kind regards

  DP - K