Keyboard Windows Arc is not of type.

Similar Questions

• Can't type correctly with Japanese IME on the English English keyboard/windows 7

  Hello, I have a problem with Windows 7 Home Premium English on the English keyboard when entering Japanese with IME.

  No, I shouldn't need the Ultimate edition: with Windows Vista and XP Home Edition Premium or equivalent editions, it was not a problem.

  With Windows 7 IME, the keyboard seems to be linked to the Japanese keyboard.
  For example, if you type [Shift] + [2].
  -English keyboard return [@]
  -Japanese keyboard return [""] (double quote)

  I physically have an English keyboard with my PC, and I get ["] when I actually meant to type [@].

  As I mentioned, it was perfectly fine with XP or Vista, type with Japanese IME and the English keyboard layout. How to make the setting even with Windows 7?

  Here's how I solved the problem, but I do recommend not really - MS should distribute a fix to fix.

  1. open the registry editor.

  2. go to: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\i8042prt\Parameters

  3. change the value of LayerDriver JPN kbd101.dll to kbd106.dll

  4. change the value of OverrideKeyboardIdentifier from PCAT_106KEY to PCAT_101KEY

  5 change the value from 2 to 0 OverrideKeyboardSubtype

  6. close the registry editor and restart Windows.

  Source:
  http://blog.Heiichi.com/?Eid=792239

  As usual, please edit the registry at your own risk.

• Windows 7 does not recognize any keyboard, except the v1.0 of MS natural ergonomic Keyboard 4000 defective

  I have a very strange problem.

  I have a desktop computer Windows 7 64-bit edition, all of a sudden about a third of the keys on my Microsoft Keyboard stops working.

  So, I bought a new generic keyboard.

  The problem

  1. If I plug the natural ergonomics MS Keyboard 4000 v1.0-it recognizes the keyboard, BUT it does not recognize one of the buttons on the left and right of the keyboard.

  2. If I plug any USB keyboard or a Bluetooth keyboard on it - it does not recognize.

  However, the Bureau will recognize any wired (USB) or mouse wireless (bluetooth) connected.

  It baffles me that the bureau will recognize a usb or bluetooth mouse mouse - but that it will not recognize the bluetooth keyboard or a usb keyboard.

  I tried many things

  1. connect the USB and Bluetooth keyboards in my laptop and check that they work properly. -They are.

  2. I tried using different USB ports on the desktop. He has not made a difference.

  3. my computer allows you to access its bios using F8 - I checked that my material was grateful the Generic USB keyboard before loading Windows. (I could select F8 and bring up the desktop in mode of Bios Configuration).

  4. I tried to start Windows in safe mode. That did not help at all.

  Any help would be greatly appreciated.

  Hello Pauliw,

  Please provide detailed information about your question. I appreciate the step by step troubleshooting, and pain that you have taken to resolve your problem. However, there are a few steps more that we can try to diagnose the root cause in order to solve the problem permanently.

  You can try the steps in the following Microsoft article and see if it works for you.

  Troubleshoot keyboard

  Note: There is place for Windows 7 also.

  Troubleshoot the incidents of the response to the mouse or wireless keyboard

  If the problem persists, try to remove all of the ghosts of your computer devices and then try to use the device. You can see the steps below.

  1. Click Start

  2. In the Search box, type command prompt .

  3. In the list right click on command prompt and select run as administrator.

  4. At a command prompt, type the following command and press ENTER:
     Set devmgr_show_nonpresent_devices = 1

  5. IN the following line from the command prompt, type the following command and press ENTER:
     Start devmgmt.msc.

  6. When the Device Manager opens, click on view

  7. Now, click Show hidden devices.

  8. Remove all the entries that exist for the keyboard and the USB category.

  9. Close Device Manager , and then restart your computer.

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Thank you.

• Keyboard backlit Y500 does not work after installing Windows 7

  Got a y500, love, installed Windows 7 (experience challenging, but glad I did now that it's done). Everything works like a charm, EXCEPT the backlight on the keyboard. By pressing FN + space does nothing. The keyboard does not blink when starting upwards, either.

  After repeated calls to the line of Lenovo, the responses I get are simply: we don't know why the keyboard backlight lights with Windows 7 installed.

  I don't want to go through the hassle to put Windows 8 on just for the backlight.

  There must be a way to activate the backlight of the keyboard while running windows 7. Lenovo, can you please go to the top of the chain of command to those who are working on updates of pilot and see if there is a way to make it work? Or tell me if I do something wrong?

  TL; Dr: keyboard backlight worked while Win 8 has been installed, put win 7 on, is no longer works.

  I would check the cable connections, the most likely problem.

  You can get a new keyboard on ebay for ~ $40... I'd rather spend than that being without my cell phone.

  http://www.eBay.com/ITM/400543129741?ssPageName=STRK:MEWAX:it & _trksid = p3984.m1423.l2649

  If the link does not work, you can search and Y500 keyboard, but others do not look right.

• Computer crash xp pro have attempted to use the console to restore windows, but im not a good enough geek to type orders correctly is a more automated way to boot from the CD to reinstall the CD?

  Computer crash xp pro have attempted to use the console to restore windows, but im not a good enough geek to type orders correctly is a more automated way to boot from the CD to reinstall the CD?  There is a lot of argument about deplacerb help pages the correct process and commands to use I don't want to do more damage.

  Thank you

  Hello

  I suggest you to visit these links and check if it helps:

  How to install and use the Recovery Console in Windows XP:
  http://support.Microsoft.com/kb/307654

  Description of the Windows XP Recovery Console for advanced users:
  http://support.Microsoft.com/kb/314058

  How to perform an upgrade on the spot (reinstallation) of Windows XP:
  http://support.Microsoft.com/kb/978788

  Check if that helps.

• Windows Vista is not activated, because time is up, asking 'another key type.

  Windows Vista was not enabled within the stipulated time, now when I try to turn it on error comes as follows
  -> product key purchase online.
  ->, type a different product key.
  -> Contact microsoft to help solve this problem.

  What should I do now that I bought a genuine software.

  How to activate Windows 7 or Vista manually (activate by phone)
  http://support.Microsoft.com/kb/950929/en-us

  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) clearly explain your problem to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  ----------------------------  Alternatives -------------------------------------

  To enable the use of the phone
  1. open Windows Activation by clicking the Start button, right-click computer, clicking Properties, and then clicking

  Activate Windows now. ?

  2. click on show me other ways to activate.

  3 type your Windows 7 product key, and then click Next.

  4. click on use the automated telephone and then click Next.
  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  5. click on the location nearest you from the drop-down list, and then click Next.

  6. call one of the available phone numbers listed. An automated system will guide you through the activation process.

  7. When prompted, enter the installation ID that is listed on your screen in your phone keypad.

  8 Note the confirmation ID the phone system gives you.

  9. under the terms of step 3, type the confirmation ID in the space provided, click Next, and then follow the instructions.

  10. If the activation is not successful, stay on the line to be transferred to a product activation agent who can help you.

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851
  Windows activation: (888) 571-2048

  J W Stuart: http://www.pagestart.com

• I changed my computer and am trying to re - install PS elements 13.0 on Windows 10. When I type my license serial number, Adobe responds "he does not recognize this serial number. When I go to the serial number recovery service, first he said he doesn'

  I changed my computer and am trying to re - install PS elements 13.0 on Windows 10. When I type my license serial number, Adobe responds "he does not recognize this serial number. When I go to the serial number recovery service, first of all it tells me it is not a product registered with my name and when I type the serial number for the old serial numbers, the system responds to that serial number is alredady registered and cannot be registered twice. What needs to be done to get out of this problem of serial number? Thank you.

  Hello Charles,

  to check this, you should take a look at the Adobe database to see what is stored/recorded on your accounts. You will find general information on your account Adobe https://accounts.adobe.com/> see My productsView all the > these products are associated with your Adobe ID > name > serial number.

  [And to find your serial number have a look here http://helpx.adobe.com/x-productkb/global/find-serial-number.html > I've lost my serial number >] see comments.

  The last time Adobe suggests so too this activation https://helpx.adobe.com/contact.html?step=ZNA_downloading-installing-setting-up_licensing-

  Hans-Günter

• My keyboard and mouse do not work. Can't click or type anything.

  Original title: keyboard and mouse

  Hello, my keyboard and mouse don't work I can get on at the office but can't click on what whatsoever as the two keyboard and mouse do not work I tried the BIOS but still couldn't have tried different keyboards and mice, and they do not work or do not know what to do please help

  Hello Shirley,

  ·         Have you checked if the same keyboard and mouse work on other computers?

  ·         Are these PS/2 or USB devices?

  ·         You did changes to the computer before the show?

  Method 1: Try to connect the keyboard and mouse even to another computer to see if they work.

  Method 2: If they are PS/2 devices, then try to connect to USB devices to check for the issue or vice versa.

  Report of the results.

• Need phone number to talk to someone on the product key of Windows Vista is not invalid. 0x004E003 error code

  Need phone number to talk to someone on the product key of Windows Vista is not invalid. The number I tried of never made me a person.

  1. click on start and in the search for box type: slui.exe 4

  2. press enter on your keyboard

  3. Select your country.

  4. Select the telephone activation option and brace yourself for a real person.

• Windows XP does not install the automatic updates.

  Original title: kopieerfout

  After several years, my laptop with Windows XP does not install the automatic updates, giving only a mistake:

  "

  ER is een doing opgetreden bij het van het bestand ntoskrnl.exe copying

  Kan het bestand niet naar doelmap copying.

  Everything works OK.

  Thanks for your help

  Everything works OK.

  It seems that it is not... Why Dutch? You use or have the corresponding language version installed?

  Free translation of message:

  "An error occurred during the copy of the file ntoskrnl.exe
  Cannot copy file to destination... »

  Please note that ntoskrnl.exe is a process in the cycle of the initial startup on your computer program.

  Try to load your "last known good configuration".

  The issue is also known to be caused by a short circuit in the ground cable into the keyboard cable. Make sure that it is not the cause of your error by replacing the keyboard with another keyboard or just disconnect the keyboard from the computer. You can also look at your function "Add or remove programs" If KB2686509 <> http://support.microsoft.com/kb/2686509 > is installed.  Install manually if it is not.

  If the above doesn't help, try using the Sfc.exe tool - see here > http://support.microsoft.com/kb/310747

  Or run the Chkdsk tool - see here > http://support.microsoft.com/kb/315265

  If still no luck, you may need to restore the file ntoskrnl. exe as follows:

  1 - insert the Microsoft Windows XP CD. Note: If you have a recovery CD or a restore CD and not a Microsoft Windows XP CD is probably the procedure below does not solve your problem.

  2 - restart the computer and that the computer starts, you should see a message press any key to boot from the CD. When you see this message press any key.

  3. - in the Microsoft Windows XP setup menu, press the R key to enter the recovery console.

  4 - Select the operating system you want to set and enter the administrator password.

  5 - type expand d:\i386\ntoskrnl.ex_ c:\windows\system32

  6. - you will be asked if you want to overwrite the file, type Y and press enter to replace the file.

  7 - type exit to restart the computer.

  Hope this helps - good luck!

• keyboard laptop xp does not

  I have a toshiba laptop with windows xp and impossible to type words.  I can use my mouse and I can get on the net but cant type and any software.  My keyboard does not work. Help, please.

  Hello

  1 how long have you been faced with this problem?
  2. don't you make changes on the computer before this problem?
  3 have you checked the State of the keyboard in the Device Manager?
  4. What is the number of the model of the laptop?

  Try to run the fix it tool in the following article and check.
  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/

• Windows Installer error: Windows Installer could not be accessed

  I just Crysis and I try to install it, but when I try the Windows Installer appears and stays there for half an hour then says that Windows Installer could not be accessed. Help, please. (64-bit version of Windows Vista)

  Well, I found the solution for this:

  • Log your computer as an administrator.
  • Click Start and then click Run. (or alternatively, you can press windows + r on your keyboard)
  • In the Open box, type cmd and then click OK.
  • At the command prompt, typemsiexec.exe /unregister, and then press ENTER.
  • Type msiexec/regserver, and then press ENTER.

  It fixed for me.

• All of a sudden my Window Vista is not authentic, what to do?

  suddnaly my Windows vista is not genuine product iD 89576-OEM-7332141-00216 but I lost my cd to see the product key what do I

  You have the product key? If so, simply request a replacement from the manufacturer of the computer drive or borrow a disc of Windows Vista to friends if they have a.

  If its an OEM system builder license, well, you would be responsible for the disc because consumers are not supposed to have really.

  Have you tried to restart by phone?

  Activate Windows 7 manually:
  1. click on start and in the search for box type: slui.exe 4

  2. press enter on your keyboard

  3. Select your country.
  4. Select the telephone activation option and brace yourself for a real person.

  How to fix common activation problems Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• Windows Explorer is not responding. you want to wait, close or restart the program

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs: WINDOS VISTA
  • Error messages: WINDOWS EXPLORER IS NOT ANSWER
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Windows 7 will not be activated. With the help of a legitimate license key.

  Windows 7 will not activate... With the help of a legitimate license key.

  Have you tried to activate by phone?

  Activate Windows 7 manually:
  1. click on start and in the search for box type: slui.exe 4

  2. press enter on your keyboard

  3. Select your country.
  4. Select the telephone activation option and brace yourself for a real person.

  Please run the Microsoft Genuine Diagnostics Tool then copy and paste the results into an answer here for further analysis:
  http://go.Microsoft.com/fwlink/?LinkId=52012

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP