Kit Kat restore Image - 4400US - NULL?

Similar Questions

• How to minimize the Firefox browser in Tablet Android Kit Kat 4.4.2?

  You want to minimize Firefox on my Tablet Android Kit Kat 4.4.2 but find no way to do it. Y at - it a soft? Exactly, I want to open my email client during the race as Firefox on my PC. Tried searching Google Play Store for an application, but did not find one. Thanks for help.

  Thank you. Will certainly search for this preference. I guess that covers it all. Thanks for your help. I'll mark this as resolved.

• Atrix HD becomes Android Kit Kat 4.4 :)

  If you look here, you will find that the Atrix HD will get Kit Kat. Very exciting! What do you think?

  
  

• Kit Kat 4.4.2 - changes, tips & tricks

  Hey Droid community Ultra/Maxx! I would like to solicit your help in creating a document to help others who are considering upgrading (or who have already updated) for the new Kit Kat OS 4.4.2. I know that many of you who have taken the time to join this forum are very experienced users and are much more aware of the changes in the new OS I am. Your contribution would be very appreciated. And this is not to say that noobs like me do not have something valuable to contribute! Everyone is valued and respected in my opinion, so please don't hesitate to contribute.

  The four applications I would on the format and content would be:

  1. that the new main sub-themes posted in direct response to this first assignment
  
  
  
  2. additional information about a change that is already covered, the tip or the thing displayed in response to the first announcement on that C, T or T unless of course it's a comment that applies only to one of the existing answers and not the main theme
  
  
  
  3. Limited subthemes for issues arising from the update of Kit Kat (not just any what other Android OS or Motorola phone General questions)
  
  
  
  4. If you have found a new feature or set up a previous feature that has created a problem for you, and it has not been posted yet... the post in response to this message even if you do not have a solution. Then others who have something to help this issue can respond with their comments
  
  

  I hope that's not too FAKE.

  OK... Thanks for playing and we will make the motorcycle world a better place!

  Ultra MAXX have yet 4.4.2 and no idea when we could?

  Did you mean to post on the forum of RAZR MAXX HD by any chance? They have 4.4.2

• Kit Kat Google Dialer?

  I just read an article that said that phones nexus would have Google update dialer as part of the Kit Kat. Anyone know if there is any truth to that? I was really looking forward to this feature.

  Yes, the smart Dialer of Google is specific to the Nexus of phones line and is not included. Here are the other things that are exclusive Nexus.

• Kit Kat Update - future

  Since the upgrade Kit Kat 4.4 there were problems I noticed, and others have

  Some Include-Notification/lock screen active 'Lag', 'Remove the text' freeze on the screen when deleting an application as well as the notification bar remaining black instead of transparent and is not included in the new Dialer business search (can be an exclusive link?)

  It is going to be an update soon to solve these problems?

  There was a post by the forum manager today that they always comment KitKat conclusions to determine what should be their goal.

  And Yes, this search for the company is exclusive of N5.

• Lost restore images...

  I lost my HP Netbook restore images skillfully and now I want to remove Linux and using the machine as a WIndows computer again.

  Is there a way I can get these images of HP?  I would just buy a copy of Windows Starter, but I can't find a source, and I strongly suspect that another version of Windows won't slip into a 2GB machine.

  Thanks in advance,

  Dave

  It is true that HP provides only the recovery disc for a limited time - but you don't know until you ask the question:

  Looking for recovery disks?

  If you can not bring at HP, so you can have the chance of

  Surgeons HP Recovery Center

  ====================================================================================

  If you have your Windows key, you can download and make your own disks.

  It is a great option if you have the means to get there.

  Here's a great Post from our DavidPK Povost

  HARD drive has failed on a HP g6. How can I reinstall the operating system and the support of s/w on a new HARD drive

  Our big Paul_Tikkanen another excellent resource:

  HP Pavilion dv6-6117dx 'recovery has failed' HELP as soon as POSSIBLE

  NOTE: You must download and use the exact match to YOUR original OS type.  The key points in the post are worth for all versions.

  =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

  Click on the Star of Kudos to say thank you!

  When it "works."

  Click on this message "accept as Solution" to make it easier for others to find a Solution.

  =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

• HP Slate 7 Extreme (4.4 Kit - Kat)

  The only thing that keeps me back to buy the HP Slate 7 Extreme is the lack of support and information. Where is 4.4 Kit - Kat on the extreme 7 slate? I tried researching it, and all I see are empty promises from months before.

  @Eddy23 4.4.2 update is direct OTA now! Thanks HP!

• After restoring image system, content of the disc do not match

  I feel like every time I think I have this darn computer fixed, another problem appears...

  Okay, so after much headache, I was able to restore the Boot Camp from a virtual hard disk image... however... what OSX sees the contents of the drive BOOTCAMP and what BOOTCAMP sees self are completely different.

  According to OSX, here is the content:

  Kenz$ ~: cd/Volumes/BOOTCAMP /.

  Kenz$ ~: ls

  $Recycle.Bin / program Files / users /.

  BOOTSECT. BAK program files (x 86) / Windows /.

  Start / ProgramData / WindowsImageBackup.

  DRIVERS / RHDSetup.log* bootmgr *.

  Documents and Settings / recovery / hiberfil.sys*

  Intel / Recovery.txt* pagefile.sys*

  PerfLogs / System Volume Information.

  What the reader was like before restoring the system's yet OSX still think it's what's on the disc...

  Seen on Windows, for comparison, here is the content:

  Directory of C:\

  06/10/2015 AppleBcInstaller.log 58 14:45

  the 4 528 09:08 app_updater.log 19/04/2016

  02/02/2015 10:19 < DIR > Autodesk

  03/01/2015 19:41 < DIR > Intel

  2009-07-13 22:20 < DIR > PerfLogs

  12/11/2015 15:02 < DIR > PhSp_CS2_UE_Ret

  11/07/2016 17:44 < DIR > Program Files

  15/07/2016 15:37 < DIR > Program Files (x 86)

  15/07/2016 11:58 < DIR > regbackup

  10/15/2015 RHDSetup.log 2 058 19:13

  04/01/2015 18:47 < DIR > Sandbox

  03/01/2015 17:13 < DIR > users

  22/07/2016 15:48 < DIR > Windows

  3 file (s) on 6 644 bytes

  10 dir 66,776,281,088 bytes free

  In my view, that is a problem OSX, as I need to reset the memory of the BOOTCAMP volume or something.

  I disassembled that re-mounted disk, reset the NVRAM/PRAM memory disabilities Tuxera NTFS... but it shows again that content.

  Any ideas on how to solve this problem? While I could leave it alone since the OSX and Windows and start properly, I would create an image of WinClone of Boot Camp, and in this situation, it would probably be to create a picture of the wrong thing, then I would like to than OSX to see the disc properly. The determining factor here is I would like to take advantage of the free upgrade to Windows 10, but I want to be able to roll back to where I was in the worst case scenario.

  On the side of OS X, you disassemble and reassemble the Bootcamp partition? Tuxera can complicate and lead to corruption.

• Satellite 5100: need to restore image file

  Hello world

  I have a problem with my recovery disk1 which contains preinstall them image Satellite 5100.
  Could someone give me a copy of this image file generously?
  The path of the file is in the directory base with preinst.gho as the name.
  If there is someone willing to help me, please contact me by email at [email protected]

  Thank you

  The CD of restoration took supported and compatible, you can order the ASP in your country. The CD is not expensive. You should also know that the images are trigger designed for laptops and you cannot use different files.

• Recovery Manager does not restore image on HP Pavilion p6227uk [Windows 7]

  Hello

  Currently, I'm trying to reformat my HP Pavilion P6227uk, running Windows 7 Home Premium 64-bit.

  I reformatted this machine once before (a couple of years) using recovery disks created by the system. I saved these same recovery discs to reformat, I try now to complete.

  So far I performed the steps in the order as I did before - place the CD1 in the drive, boot from the CD, run a disk factory reset. First time I tried, she returned with the error message almost immediately, he does not reformat (or something to that effect) with this error code: 0xe0ef0002 and instructions for "contact HP support. AT 01:00. You must be kidding.

  I tried again and got exactly the same result. Decide to leave for another day, when the support would be around, I tried to boot normally (with the disc from the drive). This time, I got a black screen with white, printed on the top left text:

  BOOTMGR is missing

  CTRL-Alt-Del to restart

  Oh good God. I rebooted and tried to get to the system recovery. Nada, BOOTMGR is still missing. I put the recovery in drive and started to Recovery Manager disk and proceeds to try every single diagnostic at my disposal. Nothing's wrong, apparently, except for not being able to start Windows. Get a bit peeved (I have a disorder that leaves me open to huge bursts of anger, this did not help), I decided to try the Factory Reset. Oddly enough, it doesn't give me an error message, but seemed to be progress in the "Factory image restore. 4% and then 8% - and it's been stuck at 8% for the last 12 hours at least. I don't particularly want to turn it off for the risk of breaking something - even if Recovery Manager seems pretty broken as it is. There is a blue arrow pointing to 'Reformat the partition of your hard disk Windows' and that's all. No button is available (except the red X), nothing seems to happen anywhere. Extremely disappointed.

  Any help would be appreciated. I'll be phoning HP support tomorrow to get answers, although I don't have a particularly good story to keep my mood level when you speak with assistants and on pending emails is not my thing either - I saved important files on an internal HARD drive before you start (disconnected the motherboard HARD drive) and the hours of waiting and hours for email support is not an option.

  Thank you in advance, from the bottom of my heart. It couldn't have come at a worse time.

  -JR

  Hi, JR:

  While I can't help you with the problem of specific recovery disk (and is probably impossible anyway), I have a solution to your dilemma...

  If you can read the Microsoft windows 7 25-character product key, you can download simple Windows 7 ISO files to burn on a DVD for the version of windows that is installed on your PC, and which is listed on the Microsoft COA sticker on your PC case.

  Burn the ISO with the option to burn the ISO on your DVD burning program and burn it at the slowest possible speed that will allow your program. This will create a bootable DVD.

  Use 25 characters on the PC product key to activate the installation.

  The key will activate a 32 or 64 bit installation.

  Then go to the support of the PC and driver page to install the drivers you need.

  Link to downloads ISO of W7 is below.

  http://www.mydigitallife.info/official-Windows-7-SP1-ISO-from-Digital-River/

  Paul

• Psvilion 15 t n200: network adapter driver is not found after Sys restored Image

  In order to do a "Quick & clean" upgrade of a dv6 to 15 t, I restored an Image of my Dv6 to 15 t system.   Windows 7 installs and recognizes the cpu and RAM, but does not recognize the new drive size or especially the network card.    No driver available for ethernet or network or usb 3.0 controllers.   I downloaded and installed via external HARD drive all the graphics and network of the technical support site HP.com drivers.

  Still no LAN or Wireless connectivity.

  Was my Quick & clean strategy a great idea that doean can't just work technically?

  Thank you

  You are the very welcome.

  Since this is a forum for peer to peer and I am not employed by, nor do I represent HP, I wouldn't be able to answer your question about why they have not all the right drivers on a special support page.

  For your model, it seems that it is not supported by HP for W7 64 bit, since there is a very incomplete set of the drivers listed.

  If you use HDMI output or mirror of the screen of your PC, the windows update driver wrecks installed its hdmi output.

  I have the same graphics card than yours, and I leave the same windows update install the new driver.

  When I the screen mirrored by PC for my smart TV, the sound was all choppy after this update.

  I installed this new driver from Intel which also includes HDMI audio driver, and that fixed the problem of jerky noise.

  The first file listed is the automatic installation file.

  https://Downloadcenter.Intel.com/download/24870/Intel-IRIS-and-HD-graphics-driver-for-Windows-7-8-8-1-64-bit

  I suggest that to start a new post on the docking station.  I don't have any experience with those who and how to use the disk management tool.

  This link may be useful with the disk management tool.

  http://www.MakeUseOf.com/tag/shrink-extend-volumes-partitions-Windows-7/

• Model MS2394 restore image Win7 after upgrade Win10

  I'm helping a friend with a model MS2394 recover from a malware infection. Since it's not really use the laptop for anything other than the browser, I recommend a restoration to the image of the factory which is Windows 7. The OS has been upgraded to Windows 10 via the Microsoft upgrade process and want to be sure that back to W7 will not cause more problems. I would appreciate any idea that anyone can offer.

  Terry

  You must try, ALT + F10 at startup.

• Why HP only allow more big hard drives and SSD when restoring Images of original &amp; software OS system?

  8.1 Windows recently damaged my PC h8-1559 (still under warranty). All was not if badly grown f11 empty blue screen and boot BSOD loop was the only thing besides the BIOS that I could see. I must have spent days trying to get Win 8 on my SSD after you purchase this month of PC. Now I have to restore PC to original specifications and again migrate the OS back to SSD. Not really a problem I expect no support, given how much anti-'customize' computers became under software and hardware developers who blame or place the responsibility on each other for the most part.

  I just want to know:

  That HP decided smaller HDD and SSD should never be allowed to use the pre-built PCs and why? More importantly, why has it remained for many years after many complaints over the years? Thank you.

  Hey Hastatus

  I can understand your frustration, but the smaller reader that works is 160 GB. The way the image is put on the disk and extended requires a lot of partitions and each of them is created to a certain height, these sizes were decided before the SSD, and when disk space was not that great, a case, but it was arbitrary. As SSD became more popular and used in some of our systems we made some special changes in plants in order to allow a 60 GB drive to use. But the changes were not made to any other builds, there was not only considered.

  As SSD became more popular, they are also grew in size, so the decision was made to leave the requirement of 160 GB. It's not a way to go back and change to the older, but we will spend this feedback to our engineering teams.

  Bottom line - usable - more small disk 160 GB regardless of the type (HDD or SSD).

  Sorry not information just solution.

  Bill

• System restore image fails - missing Bootmgr

  Recently bought more large hard drive to my PC at home - the system Windows 7 (from my old HD) image successfully created using native Windows 7 system image utility.

  When you try to load the image on my new HD, it seems to work fine, however start fails with "Bootmgr" is missing error.

  Have tried to use the restoration of utility system Windows 7 installation disc, but that does not solve the problem.

  THX in advance for any idea / help

  Hello

  Windows 7 creates a 'Active' partition (drive Q in general) that the system boots from. You got the fine image, but probably not the Q score he needs to boot from. This partition is usually 100 mb in size and the beginning of the disc.

  Here's what I would try first.

  1) boot from the Windows 7 DVD and install it. Don't bother entering your key.
  (2) when it is finished, apply your custom image on the new installation of Windows on the C partition as you did before. This should wipe the installation we just did and replace with your image. The boot partition will be set up and you should be good to go.

  I hope that this help... is not myself, but it should work fine. Mark <> Microsoft Partner