Kuler desktop installation problems

Similar Questions

• CS6 cc: CreativeCloud desktop installation problem

  I upgraded from tot CS6 creative cloud. But I can not install CreativeCloudSet - Up.exe Windows (Vista). The installer just opened Adobe Application Manager.

  So in the end, I can't use Typekit to desktop, I'm in favor of.

  I've been busy to find a solution, but my question is similar to a new problem.

  The required configuration is described here on the page where you download the software, click on the link and then click on system requirements: https://creative.adobe.com/products/creative-cloud

• Remote Desktop having problems connecting Surface RT to Win 8 portable Pro (new installation)

  Remote Desktop/RemoteApp problems

  I was not able to connect outside of the network.

  I sprung several days trying to solve this problem by myself, then on the phone with Microsoft productivity, and some of them aren't yet familiar with Surface RT. So with the RD in network connection is quite simple and effective, I hope some people here can confirm that they have the same problems or possible solutions.

  As I see it, there are 3 interfaces where we can connect to RD on the Surface RT: Pre-installe Remote Desktop Office found via scanning and research, the metro downloadable RemoteApp and desktop remotely via the control panel).

  I see where ping command is executed on the computer and port 3389 is open and oriented to the laptop, so I will state the problems I see with each when I try to log on a Windows 8:

  (1) pre-installed RD:
  

  It's great and the name of your computer is there for you and connected to your account and network ready. You have options like "Connect and don't warn me if server authentication fails" I think has helped many people on Windows Server with certificate problems.

  Off-grid on Surface RT, however, you get «Remote desktop cannot find the computer _.» This may mean that '_' does not belong to the specified network. Check the computer name and the domain you are trying to connect to."

  (2) metro UI:

  
  

  It seems to do a ping the computer more quickly when you put: 3389 at the end of your IP address. However, no success after having tried with and without the end of the port. The messages I get are...

  RemoteApp 3):

  

  This is the solution I've seen in most tutorials,... but the reason given for not connecting, it is "the remote computer cannot be authenticated due to problems with its security certificate."

  Instead of the option to bypass (which option 1 gives you), there is no other choice, and he says "Windows is unable to continue setting up this connection. Contact the administrator of your workplace. »

  This message made me to learn more about the certificates that I always wanted to know. I tried to start MMC and ensuring that the cert listed in Remote Desktop has been copied to the folders of the confidence of the authorities certificate root (duplex as certificates on the local computer). I tried different combinations and did not really anywhere.

  If someone connects via #3, please post care on your certificate if you can find it.

  Any help on getting one of these methods to work is appreciated. It puts naked repeat that port 3389 is listed as open on my home network, the traffic is transferred to the correct PC and all firewalls are disabled until I can solve this problem.

  Hello

  Sorry for the delay in responding.

  Assistance in connection with Remote Desktop problems are handled by technicians of the TechNet Forums.

  If you are also facing problems with remote desktop on the computer Windows 7, then please post your question in the Windows 7 IT Pro TechNet Forums: http://social.technet.microsoft.com/Forums/windows/en-US/home?category=w7itpro

  Thank you.

• Problems running Kuler Desktop using Air (Mac)

  I have problems with the Kuler desktop, which runs via Adobe Air. I tried to reinstall Adobe Air and Kuler Desktop, without a bit of luck. Air and Kuler both installed without error. Once I run the application "Kuler Desktop" the color wheel rotates right in the centre of the window with the message "Sorry, no items were found" at the top of the window. I can use my widget Kuler dashboard very well and because it works, I don't think it's a connection problem.
  
  I am running 10.5.3 if it matters at all.
  
  Am I missing something? Does anyone else have this problem?
  
  d

  Hi dmane,

  Please, try the following steps:
  1. go to user > library > Preferences, delete com.adobe.kuler.Desktop. folder [variable]
  2. go to the user > library > Application Support > Adobe > AIR > ELS, delete com.adobe.kuler.Desktop. folder [variable].
  3. restart the system and then restart the kuler desktop.

  Good luck!

  -dhu

• Kuler desktop problem

  I downloaded AIR and installed but when I open it the Kuler desktop, it gives me a code/text gripload in my browser window. Any suggestions?
  
  Thanks a bunch

  Hello, if you have trouble to install the kuler desktop, see this topic for troubleshooting and reporting advice.
  Saami

• Update of new Windows 7 installation problems

  Hello

  After windows 10 road test for a few months, I decided that it wasn't going to work for me. So I used my drive of windows 7 to do a new installation, after I formatted the hard drive. I installed the operating system successfully, but when I do the 200 some setting to update and to install as failure 8 and it asks me to restart, I do. After he completes the updates I login and then the screen is black except for the cursor that I can move around. I did that only connected things are a monitor, keyboard and mouse and Ethernet and always have the same question.

  I restarted in safe mode, and I am able to do throughout, on the desktop, no problem. So that being the case I thought I could do a system restore and updates from another chance. Well, I did this 3 times now with no luck. I even downloaded the diagnosis of WindowsUpdate tool and when I run it I get the error code "0 x 80070002.

  I honestly have no idea what to do and have not found help online.

  Restart your computer and wait 30 minutes for the system to operate before you download information. When the review much, not Event Viewer log files all problems show in the period immediately after the computer has booted.

  Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download the file to your OneDrive, to share with everyone and post a link here. Normal mode preferred report. Please say if the report was obtained in safe mode. If the report is in one language other than English, please indicate the language.

  Please download and share with everybody fresh copies of your System log and journal of the Application (two files) of your event viewer on your disc one and post a link here. You can delete any previous copies of your OneDrive records.

  To access the system, log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window, expand Windows logs and select System. Place the cursor on the system, select the Action in the Menu and record all events like (the evtx default file type) and give a name to the file. Do the same for the application log. Do not offer not filtered files. Do not place the cursor in the list of reports before selecting the Action from the menu. Do not clear the logs so that you have a persistent problem.

  For assistance OneDrive see paragraph 9.3:
  http://www.gerryscomputertips.co.UK/MicrosoftCommunity1.htm

• The Adobe Desktop installation program will not load the app screen tab, all I see is the loading icon and runs continuously without ever loading. All the other tabs seem to load without any delay, only the app tab does not load. I tried to uninstall and

  The Adobe Desktop installation program will not load the app screen tab, all I see is the loading icon and runs continuously without ever loading. All the other tabs seem to load without any delay, only the app tab does not load. I tried to uninstall and reinstall the software, rebooted a couple of times and tried to activate the download of the Premier Pro via the website, but it still doesn't load in the desktop application.

  This solved the problem for me:

  Use the CC cleaning tool to resolve installation problems. CC, CS3 - CS6

• Limbo btw desktop installs

  Hi all

  I'm a long-time user palm which is having a wired installation problem I'm sure someone can help with.

  Background:

  A Treo 700 p Sprint with Palm Desktop 4.2 work very well for years on XP.  I lost the 700 p Monday and replacement who came today is a 755 p (without disks), I downloaded the Win Desktop 6.2 installation program.  After using EnditAll2 to close everything, I tried running the Setup program.  He warned me that she finds a version older office and prompted me to update.  I said yes to upgrade and then he worked for a while preparing the wizard before it gives me the message that the wizard was interrupted... .with the wording as my system is not affected.   So I tried to run the Office already installed 4.2 and gave me the Office Configuration not valid and terminated error message.  All files and modules is always in the same place in the same directory of files of program/Palm.  I tried to run the installer of 4.14 but it tells me there is a newer version already installed.  If I go to Add Remove Programs entry Palm has strangely no button change/remove Unlike everything else here I can not uninstalled.

  So, I can't installed 6.2 and the previous installation now doesn't work! I have dealt with really important contacts that I don't currently have access via phone or desktop that is troubling.

  Any help?

  TIA,

  Dan

  Hello dshep and welcome to the forums of Palm.

  I went up against a corrupted installation of Palm Desktop once and has been in the same situation as you: can't unisntall the botched copy of the software and I could not install the old software because the new software was already "installed".

  Microsoft has a tool that should be able to help to call the Windows Installer CleanUp utility.  You can download it here.

  Good luck

  Alan G

• Kuler Desktop questions

  Hello
  
  If you tried to use (or download) Kuler AIR Office today, December 11, 2008, it is likely that you encountered problems. We are aware of the problem and are working on a fix. We will soon have a solution available. We apologize for any inconvenience this may cause you.
  
  As always, thank you for your continued support.
  
  Best regards
  The Kuler team

  We have isolated the problem with the Bureau of AIR Kuler and have solved the problem. To get the application running again, you will need to uninstall your current version and then install the latest version. You can find the latest version on the homepage kuler.adobe.com. Just click on the "Kuler desktop" link on the new space and the right side of the page after uninstalling your current version.

  We apologize for the inconvenience added.

  Best regards
  The Kuler team

• Kuler desktop

  Hi, I am on Windows (XP) and use the last air Office kuler App.
  Signature, I have to use my Adobe (= my email address) ID.
  Trying to fill in the sign @, kuler Office closed unexpectedly, obviously because this key combination is the quit-shortcut on Mac ;-)
  Is it me?
  Thank you
  /Holliwell

  No, it's not just you.

  It is a known problem with the German language systems where the sign @ is typed using a special key (AltGr), who usually works as a combination of Alt and Ctrl. @ is thus a combination Alt + Ctrl and Q.

  Kuler desktop seems to omit the ALT key in this sequence and closed unexpectedly if you want to enter your email address in the login dialog box. Copy and paste is a way to get around.

  Enter your email address, and then copy (Ctrl + C) and paste (Ctrl + v).

• Toshiba G450 - Wellphone Xt installation problems

  WellPhone Xt installation problems

  Great and thank you very much!

  Maybe it could be useful for other people who are looking for such a solution.

• HP 802. 11b / g wireless network: HP 802. 11b / g wireless network adapter driver installation problems

  After installation of Windows 10 does not work me wi - fi, I can not find a compatible driver. The search I found one, but it gives me driver installation problems

  Hello @fede95,

  Thanks for posting on the Forum of HP and welcome!

  I'd be happy to help you with wireless driver problems you encounter since the upgrade to Windows 10.

  I will need to know your product number. You can follow the steps here - http://ow.ly/XnZL300dhzo - to find.

  I'm looking forward to hear back and work towards the resolution of this problem.

  If these steps solved your problem, please click "Accept as a Solution." You can also click on the "congratulations, Thumbs Up" on the right to say "thank you!"

• Streets & trips 2013 details download installation problems...

  The installation seems to work, but the program may not be running.  Control Panel verifies that the software is installed (1.8 GB) while the installer has not created an S & T normal ICON and the software cannot be loaded even by clicking on the executable file in the program directory files. I have installed/uninstalled the program several times.  Turned off Norton antivirus and firewall and Windows Firewall protection. Restarted again and again. Nothing has worked...

  -Error message: "cannot find a network share or removable device, the DVD is not in the drive or installing this application is damaged.  Make sure that the drive you installed is attached, the DVD is in the drive, your network is connected, or run the installation again from its original installed location. (5-40003-6) ".

  ANYONE KNOW IF THERE IS A FIX FOR THIS PROBLEM YET?

  Hello

  Looks like you've already discovered the streets and travel Forum.

  Streets & trips 2013 details download installation problems:
  http://social.Microsoft.com/forums/en-us/streetsandtrips/thread/a3c90cf2-ab59-4f82-9404-a8cc0a9b9a05

  Concerning

• Displays the error message when download itunes and other updates, not microsoft... says mode without failure or installer problem

  Error code is displayed. indicates the mode without failure or installation problem, contact shop etc. where purchased.

  Hi PeterLloyd,

  (1) what is the complete error message you receive?

  (2) what version of Windows you are using on the computer?

  (3) updates are you referring?

  Method 1: Try to install the program as an administrator do a right click on the program installation files and select run as administrator, click on continue if you are prompted to confirm.

  Method 2:  Select the boot and then check if the problem persists

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

• Installation problems Thrones and Patriots

  Hey everybody. I have installation problems with elevation of the thrones of nations with the Patriots. I installed rise of nations but the installation successfully Thrones and Patriots he wins in a file called CTW_New_World_Map_01_info_text.xml.18 and then says check to see if I have available disk space, or if the file is in use. It's a brand new model with no other games on it.

  Hi Riseofjohn,
   
  1. have you checked the disk installation for scratches or damage?
  2. don't you try to install the game in the other computer?
  3. What is the operating system that is currently installed on your computer?
   
  First of all I suggest to perform a disk cleanup and check whether the problem is resolved.
   
  The disk cleanup tool helps you free up space on your hard disk to improve your computer's performance. The tool identifies files that you can safely remove, and then allows you to choose if you want to remove some or all of the files identified.
  
  To use disk cleanup in Windows 7 follow these steps below.
   
  a. Click Start, click programs, accessories principally made, click System Tools and then click on disk cleanup. If several readers are available, you may be asked to specify which drive you want to clean.
  b. when disk cleanup has calculated how much space you can free of charge, in the dialog cleaning disc, scroll through the content of the files to delete list.
   
  

  Disk Cleanup dialog box

  c. clear the check boxes for files that you do not want to delete, and then click OK.

  For more options, such as cleaning of system restore and files copy of Shadow, under Description, click on clean up the system files, and then click the other Options tab.
  d. When you are prompted to confirm that you want to remove the files specified, click Yes.
   
  After a few minutes, the process is completed, and close the Disk Cleanup dialog box, leaving your computer more efficient and clean better.
   
  I also suggest you to run chkdsk.
  Follow these steps:
   
  a. click on start
  b. Type "cmd" in the start search box
  c. right-click on cmd.exe list programs and then select the run as Administrator option. If you are prompted for an administrator password or for confirmation, type your password, or click on continue
  d. in the command prompt window, type the following command and press enter Chkdsk/r X:
   Note: in this command, x is a placeholder that represents the drive letter of the volume you want to check.
  a. press y when you are prompted to check the drive the next time the system restarts.
  b. close all applications and restart the computer.
   
  Note: upon reboot, Windows checks the drive for errors, and then Windows starts
  
  After the computer restarts, repeat steps 1 through 4 for the other volume and then check if the disk cleanup works.
   
  If the steps provided above does not resolve the problem then I suggest to install the game using the cleanboot and check for the issue.
  Put your system to the clean boot state helps determine if third-party applications or startup items
  the origin of the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and re-
  install the program.
  See KB Microsoft article below for more information on how to resolve a problem by doing a
  clean boot in Windows Vista or Windows 7:
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  
  http://support.Microsoft.com/kb/929135  
  Note: after a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above KB
  article.
  I suggest also allows you to check the compatibility of the game with the Windows 7 operating system.

   

  To do this, you can visit this link below.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/         

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.