L50-B-TX satellite sound does not work.

Hello

I recently bought a Satellite L50-b-1tx but for some reason, I have problems with the sound.
Usually, I can't hear any sound when playing youtube, spotify, winamp, only a slight noise clicking noise coming from the speakers, but sometimes he play her for a second and then cut. I have tried different browsers, tried reinstalling the flash plugin
updated the bios, divers and others and re installed but nothing seams to work.
any ideas?

On this virtual path, it is not easy to say what the problem is here.
Have you tested the feature using headphones?

Tags: Toshiba

Similar Questions

  • Satellite U200 - sound does not work after the installation of Win8.1

    Hello guys,.

    I have some old Satellite U200-165. I installed windows 8.1 Enterprise assessment successfully after that I changed the hard drive SSD, but the sound does not work. Windows showing that his work perfectly, but it does not come out.

    An advise please.

    Satellite U200 is a pretty old and not supported for Win8 or Win8.1 machine. I think that we have no report on this forum how this old piece of equipment works with Win8.

    If the sound card is properly installed, have you checked all the sound settings?
    I presume that the same problem is with a headset, right?

  • Satellite L30: The sound does not work on XP Sp2

    Hi, sorry but I cannot well English.

    I have a problem. I do not have CD with drivers, but I download from the toshiba site.

    Yesterday, I reinstal windows, then I install all the drivers and I have a problem with the audio drivers.
    In Device Manager is all good, his system is activated, drivers of instalation, I have no problem. But sound does not work.

    You have any ideas?

    Hello

    If the sound does not appear on your laptop, you must first check the volume control on the side of the laptop. Turn it up to the max level.
    Then check the sound devices and audio in the control panel if any controller is disabled or turned to the lower floor.

    Additional connect headphones and check if you can hear something.

    By the way: have you installed the correct drivers? On the Toshiba page, you will find two different sets of portable Satellite L30

  • Satellite A10 S203: sound does not work - just enough

    Hello!

    To my satellite A10 S203 sound does not work, I updated my sound card and the bios but nodifferents. Nothing in the system that says that I have something wrong whith my sound is just enough. I tried speakers headphones and challenging systemsounds, mp3, Auidi direct works cd... nothing.

    Any tip?
    [email protected]

    First check the status of the sound card in Device Manager.
    If there is a yellow climbing brand then you should try to reinstall the driver. (first remove it and after reboot, install a new)

    Have you checked the volume setting and the site of laptop? Eventually he s a very simple idea, but believe me, I read many comments here in the forum and a lot of guys forget this option simply.

  • Sound does not work on my Satellite A200

    Hi guys,.

    Wondering that if you can offer me any advice, the sound does not work on my laptop. I tried to update the driver, but not luck. I did all the simple things like volume control, basic etc etc settings and I tried to do a system restore, but only restore point is yesterday, (which I think can be another problem, but anyway) it is after the problem began, is not good.

    Thanks for your help,

    GR

    Hello

    Can you please tell us what A200 you exactly (A200-xxx)?
    What operating system do you use?
    Are you using the original recovery Toshiba (Toshiba pre-installed Windows) image?

    Have you checked the Device Manager? Sound card not shown here?
    Open sound please properties > playback devices and do not forget that speakers of the option is enabled.

    Can you hear anything when you use headphones or headset?

  • Satellite L655 - sound does not work on the new install of Windows 7 Pro x 64

    Howdy all,

    I bought a Newegg L655-S5111, which was on sale, put an SSD, and then installed a legitimate copy of Windows 7 Professional 64 - bit, I got from my current employer (I'm a computer scientist). I've updated to the latest revision of the BIOS (1.70), and I have all the updates installed Windows, all drivers installed, including the correct drivers Conexant HD Audio and ATI HDMI Audio. Unfortunately, the sound does not work. Sound works briefly during my first install of Windows 7, then I cut it up until I could get it set up with a helmet. When I disabled it, she had stopped working.

    This laptop is less than 3 weeks at this point, old and I get no audio on headphones or speakers, even if Windows displays clearly no problems with the drivers, they have the latest version on a new installation, and I can see the audio mixer game. The laptop built-in microphone captures sound as well. I think that's probably not a matter of the physical interconnection, but more likely a software problem, I just have trouble identifying where it is.

    I have also no related error message than any where in the case of newspapers.

    Post edited by: ADMIN

    Can you please do a test and install original recovery image Toshiba, that you got with your laptop on this new SSD, just to see if it will work with the original image.

    Recovery image contains all the necessary drivers and OS is perfectly configured so each piece of hardware in your laptop should work correctly.

  • Sometimes sound does not work on Satellite A65

    I got my pc for years and never had this problem until recently.
    Most of the time the sound does not work, but sometimes when I restart (and sometimes when I'm warming up stand-by) the sound will return.

    When it works it lasts as long as the PC is on, but it the PC itself will be down due to overheating sometimes, and even if it does not, I do not leave all the time.

    When the sound does not work I can not play with the exception of windows media videos.
    Any youtube or videos of the similar site will only play for about two seconds and then pause, no noise at all.
    Same thing for my iTunes.

    When the sound does not work I can play iTunes all night, but when it isn't the songs does not play again. The cursor remains just at 0:00.

    Is there something I can do?

    Hello

    As a first step, the fact is that this laptop is pretty old. I think around 4 years. Am I right about that? There may be a lot of dust on the inside and as a result you have it sometimes overheat issue. May be time to clean the laptop.

    If is also possible through these overheating problems is something faulty now. It may be that some contacts (associated sounds) are not much more and the contact is it sporadically. To be honest, to me that sounds like hardware related issue. I really don't think you can do much alone. Maybe try to make clean OS install and see what happens. If the problem persists or you have to get an external solution or takes it to the authorized service provider.

  • Satego P100-10F: Windows XP Lan, usb slots and the sound does not work

    Hello

    I have problems with windows vista, so I checked the forum to get information on the windows xp installation.

    I downloaded the drivers windows xp since the P100 Satellite (pspa6e), my only problem is that the LAN, usb slots and my sound does not work.

    I hope someone has a good idea for drivers or to install another driver I have sound and LAN on windows xp.

    Ty and Greetz

    See European driver of Toshiba.
    Here, you can try to install several drivers of different portable Satellite P100.
    Try all series.
    Fact is that some units of the Satellite P100 and Satego P100 series were delivered with the same features.
    Therefore, it should be possible to use the unique drivers of these series.
    Check all.

  • Tecra M10 - Sound does not work on Windows XP SP3

    TECRA M10 sound does not work with Win XP SP3

    1. the drivers from the toshiba web site.
    2 chipset drivers and audio drivers were reinstalled no luck,.
    3. no mute FN + Esc
    4. feature eat that all drivers ok

    Hello

    If I understand your right all devices listed correctly in the Device Manager and you don t have yellow exclamation points?

    Normally, for high definition sound cards, you need two patches from Microsoft:
    KB835221 and KB888111.
    Normally, these patches are integrated into SP3 but it works only if you install the audio driver after SP3. So, if you have an older version of XP without SP3, you must update to SP3, all first and then install the display driver.

    So in your case, you must delete the current sound driver and restart the laptop. Then use CCleaner to clean the registry and system files. Reboot the laptop. Then download and install the driver of his newest Realtek Hompage.

    Good bye

  • Re: Sound does not work on Tecra M10

    Hi all

    I have a Tecra M10 with XP and all the drivers installed, but sound does not work.

    I checked the Device Manager and everything is fine, no red cross or whatever it is on the driver realtek audio.

    Everything on the sound properties. I even uninstalled and downloaded the audio driver from the toshiba site again but still no sound and no mistake.
    Can someone help out here?

    Thank you.

    Hello!

    The sound is turned off on your laptop? With the FN + ESC key combination you can enable/disable it.
    Check it!

    In addition to the high definition audio devices you need two patches from Microsoft to go looking for the proper functioning. Have you installed the two?
    Here are the links to the Microsoft Knowledge Base where you can download both:
    http://support.Microsoft.com/kb/835221
    http://support.Microsoft.com/kb/888111

    Good bye

  • Bluetooth on Satellite L500 does not work!

    Hey well im disappointing defetly of Pentecost suport of toshiba, they never anwser mi email, and when I call for the support that they did not fix the problem mi! After 2 monthas waiting they never remember!

    My Bluetooth on Satellite L500 does not work! I have upgraded from vista to 7 suport said that I probably had to put the Vista pc again to install the bluetooth, and upgrading them to 7. IM whit vista of Pentecost after using the restore cd.

    After that I read some post and install the drives still does not work!

    I try to install bluetooth monitor, then the battery Bt when battery is installing wask me to activate the bluetooth I use Fn + F8 and the battery does not install it!

    Any tips?

    Just do so for sure:
    You have enabled your wireless switch?

  • All my sounds work very well on my iPhone more 6s except the 'duck' sound does not work

    MY iPhone, 3 week old 6 s more, 64 GB using iOS 9.2...

    for my "Mail" alert sound stopped working during the night.  The phone always vibrates when I get an email but th 'Duck' sound is no longer working.

    When I change to use any sound, new sound works fine. ONLY THE DUCK SOUND does not work.

    Any ideas on how to fix my sound 'duck '?

    In fact, my Duck sound won't work for any alert. It cannot be tested as a sound signal.  It's like my Duck sound flew. And I'm not kidding.

    its just gone!

  • HP pavilion dv9925nr sound does not work help please

    Hi I have a hp pavilion dv9925nr laptop and I spent in Windows XP pro and now the sound does not work and iv tried everything iv downloaded all the drivers on the internet and everyone simply goes on to say: no driver no has been supported in this package and its driving me crazy please can someone help before I just use it to target paratactic

    Hello:

    Then I recommend that you follow the instructions in the guide to the link I posted above.

    After you install the MS UAA driver, you may need to install the audio driver updated the posted on this link:

    Conexant High Definition SmartAudio 221 drivers (ModelC700, Vx5xx series and dvx5xx and ABOVE )

    Pilot modded by silver here

    Unzip it to a folder... Use the device, right click "Audio Device on HD" Manager, choose Update driver,
    Not to connect, install from a list or specific location,
    Select don't search, I will choose the driver to install.
    For the hardware Type select 'show all devices '.
    Remove control "Show compatible hardware" and click on 'disk '.
    Next... Navigate to the unzipped folder and choose the "WiSVHe5.inf".
    Ignore XP when he complains, Reboot.

    If none of this works, try to reinstall XP and start from scratch. If you do not see your appliance an audio controller if you reinstall XP, then more than likely it is a hardware failure of the audio chip.

    Paul

  • IdeaPad Y570 sound does not work all the time

    My laptop is Y570

    The question, the sound does not work

    When I start windows I can hear the windows startup melody plays when I start windows media player, video YouTube, VLC player or any other software that requires sound it will not work unless:

    I go to sign in-online sound-online right click test Realtek HD Audio, then the sound works.

    I tried to fix it by the installed driver and reinstall, I went got the driver from Lenovo and it did not work. My speakers are JBL

    Please help me

    uninstall both... reboot then install realtek then reboot then install the drivers of onekey theater.

    http://support.Lenovo.com/en_US/downloads/detail.page?docid=DS018489

  • Sound does not work when it is connected to the TV with HDMI

    I have a HP Pavilion Notebook PC, DV7 - 6813EV, running windows 7 Home Premium 64-bit SP1. My problem is that I have no sound when connected to my TV HDMI connection and press. Please could someone help me? Thanks in advance

    Hello gematz,

    The sound does not work when it is connected to the TV via HDMI.

    Go to start.

    Type sound.

    Click sound

    On the playback tab, click with the right button on the HDMI interface, and then select set as default device.

    If you do not see the HDMI, right click and select devices see off, then set as default.

    I would like to know how everything goes.

Maybe you are looking for

  • Deleting files is not releasing space

    A few weeks ago I noticed that my Macbook pro (mid-2010) has been slow.  I took a quick glance to the disk utility and I saw that I had only 6 GB of free space!  Oops!  So, I backed up everything on my hard drive external and put to work.  I started

  • CANopen Close VI gel when closing an ODS object

    CANopen Close.vi will not stop and is frozen when a SDO object is closed. I create an interface object, then an ODS object, read the SDO object and then close the ODS object, then the object of the interface. Any ideas?

  • LabVIEW 2012 error 7 creating executable

    I try to create an executable file to run on a machine without LabVIEW installed on it.  I'm working through the steps of creating the project and to define the source of VI and build specifications.  When I say to build it makes almost all the way t

  • How to open the sounds and audio properties by using Labview

    Hi all How to open the sounds and audio properties of the control panel using the exe from system Labview vi. Y at - it all dll also open this property. If there is some dll which is which and how to program the dll to achieve my goal.

  • Having problems connecting via Hyper Terminal

    Try to connect to a video conference bridge Codian through Hyper Terminal, and can't enter the system to set IP address and gateway