Lab environment, IPSEC VPN works, but can't ping Interfaces
Hi guys
I'd appreciate a hand with a problem I have with the installation in a lab environment. I'm sure that there is something really simple, I missed... maybe you know what it is.
The fundamental problem is, since a host in "Location A" I can ping any host in the 'Place B' interface through a vpn ipsec standard except the inside of the remote pix that I am logged in via vpn. I am unable to ping/open PDM inside the interface of a host 'site A' in 'Site B', I am also unable to ping/open PDM inside 'Site B' of a host interface in"location".
Here is the structure of the network
(THE HOST'S)-(PIX501)-(HOST B) (PIX515)
If you could have a look at the configs would be great.
http://users.TPG.com.au/roblyon/501.txt
http://users.TPG.com.au/roblyon/515.txt
Thank you
Rob
In earlier versions 6.3, the behavior you report was not authorized by its design. This follows the same logic that prevents you from ping the external interface of the PIX to the location from a host inside the PIX instead of A. In general, a package needs a different input and output interface. When you try clicking a remote interface on a PIX, the package never actually gets to the buffer to send to the remote interface. Therefore, it is denied.
Now, having said that... we have a solution in version 6.3 code (as you may have guessed from my earlier statement). Take a look at the command "access management". This allows for certain functions on the inside interface of the remote PIX * if * the traffic comes through an IPSec tunnel.
http://www.Cisco.com/univercd/CC/TD/doc/product/iaabu/PIX/pix_sw/v_63/cmdref/Mr.htm#wp1137951
I hope this helps.
Scott
Tags: Cisco Security
Similar Questions
-
I ran the twice successfully system restore, but that did not help. When a window is blocked, hit CTRL-Alt-Del shows an error message "failure of Security Options. I use Vista. Open windows on the desktop were often not well closed for months, but now the computer freezes as soon as I opened the first window. Busy circle is present. Mouse still works but can't do anything for files, etc.
Hello
1. don't you make changes to your computer, after which the issue started?
Follow these steps and check if the problem persists.
Step 1:
If it works in safe mode, I suggest that you can start your computer in a clean boot State and check if the problem persists.
Note: Follow step 7 to your computer as usual.
Step 2:
You can perform disk cleanup to clean unwanted files on the computer.
Delete files using disk cleanup
http://Windows.Microsoft.com/en-us/Windows-Vista/delete-files-using-disk-cleanup
-
I created a vpn connection, but can I create a shortcut to connect every time?
I created a vpn connection, but can I create a shortcut to connect every time?
I created a vpn connection, but can I create a shortcut to connect every time?
Open network and sharing Center, go to the Edit card settings window and drag the VPN icon on your desktop.
-
Establish a IPsec VPN connection, but remote site can't ping main office
Hi, I set up connection from site to site IPsec VPN between cisco 892 (main site) router and linksys router wrv210 (remote site). My problem is that I can ping network router wrv210 lan of my main office where is cisco 892 router, but I cannot ping the main site of linksys wrv210 lan (my remote site).
My configuration on the cisco 892 router:
type of class-card inspect correspondence sdm-cls-VPNOutsideToInside-1
game group-access 103
type of class-card inspect correspondence sdm-cls-VPNOutsideToInside-3
game group-access 106
type of class-card inspect correspondence sdm-cls-VPNOutsideToInside-2
game group-access 105
type of class-card inspect correspondence sdm-cls-VPNOutsideToInside-5
game group-access 108
type of class-card inspect correspondence sdm-cls-VPNOutsideToInside-4
game group-access 107
type of class-card inspect correspondence sdm-cls-VPNOutsideToInside-7
group-access 110 match
type of class-card inspect correspondence sdm-cls-VPNOutsideToInside-6
game group-access 109
type of class-card inspect correspondence sdm-cls-VPNOutsideToInside-9
game group-access 112
type of class-card inspect correspondence sdm-cls-VPNOutsideToInside-8
game group-access 111
type of class-card inspect entire game SDM_AH
match the name of group-access SDM_AH
type of class-card inspect entire game SDM_ESP
match the name of group-access SDM_ESP
type of class-card inspect entire game SDM_VPN_TRAFFIC
match Protocol isakmp
match Protocol ipsec-msft
corresponds to the SDM_AH class-map
corresponds to the SDM_ESP class-map
type of class-card inspect the correspondence SDM_VPN_PT
game group-access 102
corresponds to the SDM_VPN_TRAFFIC class-map
type of class-card inspect entire game PAC-cls-insp-traffic
match Protocol cuseeme
dns protocol game
ftp protocol game
h323 Protocol game
https protocol game
match icmp Protocol
match the imap Protocol
pop3 Protocol game
netshow Protocol game
Protocol shell game
match Protocol realmedia
match rtsp Protocol
smtp Protocol game
sql-net Protocol game
streamworks Protocol game
tftp Protocol game
vdolive Protocol game
tcp protocol match
udp Protocol game
inspect the class-map match PAC-insp-traffic type
corresponds to the class-map PAC-cls-insp-traffic
type of class-card inspect correspondence sdm-cls-VPNOutsideToInside-10
game group-access 113
type of class-card inspect all sdm-service-ccp-inspect-1 game
http protocol game
https protocol game
type of class-card inspect entire game PAC-cls-icmp-access
match icmp Protocol
tcp protocol match
udp Protocol game
type of class-card inspect correspondence ccp-invalid-src
game group-access 100
type of class-card inspect correspondence ccp-icmp-access
corresponds to the class-ccp-cls-icmp-access card
type of class-card inspect correspondence ccp-Protocol-http
match class-map sdm-service-ccp-inspect-1
!
!
type of policy-card inspect PCB-permits-icmpreply
class type inspect PCB-icmp-access
inspect
class class by default
Pass
type of policy-card inspect sdm-pol-VPNOutsideToInside-1
class type inspect sdm-cls-VPNOutsideToInside-1
inspect
class type inspect sdm-cls-VPNOutsideToInside-2
Pass
class type inspect sdm-cls-VPNOutsideToInside-3
Pass
class type inspect sdm-cls-VPNOutsideToInside-4
Pass
class type inspect sdm-cls-VPNOutsideToInside-5
Pass
class type inspect sdm-cls-VPNOutsideToInside-6
inspect
class type inspect sdm-cls-VPNOutsideToInside-7
Pass
class type inspect sdm-cls-VPNOutsideToInside-8
Pass
class type inspect sdm-cls-VPNOutsideToInside-9
inspect
class type inspect sdm-cls-VPNOutsideToInside-10
Pass
class class by default
drop
type of policy-map inspect PCB - inspect
class type inspect PCB-invalid-src
Drop newspaper
class type inspect PCB-Protocol-http
inspect
class type inspect PCB-insp-traffic
inspect
class class by default
drop
type of policy-card inspect PCB-enabled
class type inspect SDM_VPN_PT
Pass
class class by default
drop
!
security of the area outside the area
safety zone-to-zone
zone-pair security PAC-zp-self-out source destination outside zone auto
type of service-strategy inspect PCB-permits-icmpreply
zone-pair security PAC-zp-in-out source in the area of destination outside the area
type of service-strategy inspect PCB - inspect
source of PAC-zp-out-auto security area outside zone destination auto pair
type of service-strategy inspect PCB-enabled
sdm-zp-VPNOutsideToInside-1 zone-pair security source outside the area of destination in the area
type of service-strategy inspect sdm-pol-VPNOutsideToInside-1
!
!
crypto ISAKMP policy 1
BA 3des
md5 hash
preshared authentication
Group 2
lifetime 28800
ISAKMP crypto key address 83.xx.xx.50 xxxxxxxxxxx
!
!
Crypto ipsec transform-set ESP-3DES esp-3des esp-md5-hmac
!
map SDM_CMAP_1 1 ipsec-isakmp crypto
Description NY_NJ
the value of 83.xx.xx.50 peer
game of transformation-ESP-3DES
match address 101
!
!
!
!
!
interface BRI0
no ip address
no ip redirection
no ip unreachable
no ip proxy-arp
penetration of the IP stream
encapsulation hdlc
Shutdown
Multidrop ISDN endpoint
!
!
interface FastEthernet0
!
!
interface FastEthernet1
!
!
interface FastEthernet2
!
!
interface FastEthernet3
!
!
interface FastEthernet4
!
!
interface FastEthernet5
!
!
FastEthernet6 interface
!
!
interface FastEthernet7
!
!
interface FastEthernet8
no ip address
no ip redirection
no ip unreachable
no ip proxy-arp
penetration of the IP stream
automatic duplex
automatic speed
!
!
interface GigabitEthernet0
Description $ES_WAN$ $FW_OUTSIDE$
IP address 89.xx.xx.4 255.255.255.xx
no ip redirection
no ip unreachable
no ip proxy-arp
penetration of the IP stream
NAT outside IP
IP virtual-reassembly
outside the area of security of Member's area
automatic duplex
automatic speed
map SDM_CMAP_1 crypto
!
!
interface Vlan1
Description $ETH - SW - LAUNCH INTF-INFO-FE 1 to $$$ $ES_LAN$ $FW_INSIDE$
IP 192.168.0.253 255.255.255.0
no ip redirection
no ip unreachable
no ip proxy-arp
penetration of the IP stream
IP nat inside
IP virtual-reassembly
Security members in the box area
IP tcp adjust-mss 1452
!
!
IP forward-Protocol ND
IP http server
local IP http authentication
IP http secure server
IP http timeout policy slowed down 60 life 86400 request 10000
!
!
IP nat inside source overload map route SDM_RMAP_1 interface GigabitEthernet0
IP route 0.0.0.0 0.0.0.0 89.xx.xx.1
!
SDM_AH extended IP access list
Note the category CCP_ACL = 1
allow a whole ahp
SDM_ESP extended IP access list
Note the category CCP_ACL = 1
allow an esp
!
recording of debug trap
Note access-list 1 INSIDE_IF = Vlan1
Note category of access list 1 = 2 CCP_ACL
access-list 1 permit 192.168.0.0 0.0.0.255
Access-list 100 category CCP_ACL = 128 note
access-list 100 permit ip 255.255.255.255 host everything
access-list 100 permit ip 127.0.0.0 0.255.255.255 everything
access-list 100 permit ip 89.xx.xx.0 0.0.0.7 everything
Note access-list 101 category CCP_ACL = 4
Note access-list 101 IPSec rule
access-list 101 permit ip 192.168.0.0 0.0.0.255 192.168.7.0 0.0.0.255
Note access-list 102 CCP_ACL category = 128
access-list 102 permit ip host 83.xx.xx.50 all
Note access-list 103 CCP_ACL category = 0
Note access-list 103 IPSec rule
access-list 103 allow ip 192.168.7.0 0.0.0.255 192.168.0.0 0.0.0.255
Note access-list 104 CCP_ACL category = 2
Note access-list 104 IPSec rule
access-list 104 deny ip 192.168.0.0 0.0.0.255 192.168.7.0 0.0.0.255
access-list 104. allow ip 192.168.0.0 0.0.0.255 any
Note access-list 105 CCP_ACL category = 0
Note access-list 105 IPSec rule
access-list 105 allow ip 192.168.7.0 0.0.0.255 192.168.0.0 0.0.0.255
Note access-list 106 CCP_ACL category = 0
Note access-list 106 IPSec rule
access-list 106 allow ip 192.168.7.0 0.0.0.255 192.168.0.0 0.0.0.255
Note access-list 107 CCP_ACL category = 0
Note access-list 107 IPSec rule
access-list 107 allow ip 192.168.7.0 0.0.0.255 192.168.0.0 0.0.0.255
Note access-list 108 CCP_ACL category = 0
Note access-list 108 IPSec rule
access-list 108 allow ip 192.168.7.0 0.0.0.255 192.168.0.0 0.0.0.255
Note access-list 109 CCP_ACL category = 0
Note access-list 109 IPSec rule
access-list 109 allow ip 192.168.7.0 0.0.0.255 192.168.0.0 0.0.0.255
Note access-list 110 CCP_ACL category = 0
Note access-list 110 IPSec rule
access-list 110 permit ip 192.168.7.0 0.0.0.255 192.168.0.0 0.0.0.255
Note access-list 111 CCP_ACL category = 0
Note access-list 111 IPSec rule
access-list 111 allow ip 192.168.7.0 0.0.0.255 192.168.0.0 0.0.0.255
Note access-list 112 CCP_ACL category = 0
Note access-list 112 IPSec rule
access-list 112 allow ip 192.168.7.0 0.0.0.255 192.168.0.0 0.0.0.255
Note access-list 113 CCP_ACL category = 0
Note access-list 113 IPSec rule
access-list 113 allow ip 192.168.7.0 0.0.0.255 192.168.0.0 0.0.0.255
not run cdp
!
!
!
!
allowed SDM_RMAP_1 1 route map
corresponds to the IP 104
--------------------------------------------------------
I only give your router cisco 892 because there is nothnig much to change on linksys wrv210 router.
Hope someone can help me. See you soon
You can run a "ip inspect log drop-pkt" and see if get you any what FW-DROP session corresponding to the traffic you send Linksys to the main site. Zone based firewall could be blocking traffic initiated from outside to inside.
-
VPN work but I can not access pass
Hi everyone I have ipsec vpn to my cisco router at my work. When I connect via VPN from home everything works fine, I can access the internet. Get 10.0.0.x ip address in the same subnet as I pass with the IP 10.0.0.200. Switch can configure via http. When I put the ip address of the switch to my browser can't access home with VPN seotch. When I'm I work an i can access without problem. Thanks for your response
Sent by Cisco Support technique iPhone App
You must use a different IP subnet for VPN remote pool, for example 192.168.11.0/24 if you do that you also need to change you outside of the nat to deny 192.168.10.0 to 192.168.11.0 because you don't want NAT LAN for the traffic of the TIME.
-
ASA 5505 IPSEC VPN connected but cannot access the local network
ASA: 8.2.5
ASDM: 6.4.5
LAN: 10.1.0.0/22
Pool VPN: 172.16.10.0/24
Hi, we purcahsed a new ASA 5505 and try to configure IPSEC VPN via ASDM; I simply run the wizards, installation vpnpool, split tunnelling, etc.
I can connect to the ASA using the cisco VPN client and internet works fine on the local PC, but it can not access the local network (can not impossible. ping remote desktop). I tried the same thing on our Production ASA(those have both Remote VPN and Site-to-site VPN working), the new profile, I created worked very well.
Here is my setup, wrong set up anything?
ASA Version 8.2 (5)
!
hostname asatest
domain XXX.com
activate 8Fw1QFqthX2n4uD3 encrypted password
g9NiG6oUPjkYrHNt encrypted passwd
names of
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
interface Vlan1
nameif inside
security-level 100
IP 10.1.1.253 255.255.252.0
!
interface Vlan2
nameif outside
security-level 0
address IP XXX.XXX.XXX.XXX 255.255.255.240
!
passive FTP mode
clock timezone PST - 8
clock summer-time recurring PDT
DNS server-group DefaultDNS
domain vff.com
vpntest_splitTunnelAcl list standard access allowed 10.1.0.0 255.255.252.0
access extensive list ip 10.1.0.0 inside_nat0_outbound allow 255.255.252.0 172.16.10.0 255.255.255.0
pager lines 24
Enable logging
timestamp of the record
logging trap warnings
asdm of logging of information
logging - the id of the device hostname
host of logging inside the 10.1.1.230
Within 1500 MTU
Outside 1500 MTU
IP local pool 172.16.10.1 - 172.16.10.254 mask 255.255.255.0 vpnpool
no failover
ICMP unreachable rate-limit 1 burst-size 1
don't allow no asdm history
ARP timeout 14400
Global 1 interface (outside)
NAT (inside) 0-list of access inside_nat0_outbound
NAT (inside) 1 0.0.0.0 0.0.0.0
Route outside 0.0.0.0 0.0.0.0 XXX.XXX.XXX.XXX 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
AAA-server protocol nt AD
AAA-server host 10.1.1.108 AD (inside)
NT-auth-domain controller 10.1.1.108
Enable http server
http 10.1.0.0 255.255.252.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set
Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
outside_map interface card crypto outside
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH 10.1.0.0 255.255.252.0 inside
SSH timeout 20
Console timeout 0
dhcpd outside auto_config
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
internal group vpntest strategy
Group vpntest policy attributes
value of 10.1.1.108 WINS server
Server DNS 10.1.1.108 value
Protocol-tunnel-VPN IPSec l2tp ipsec
disable the password-storage
disable the IP-comp
Re-xauth disable
disable the PFS
IPSec-udp disable
IPSec-udp-port 10000
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list vpntest_splitTunnelAcl
value by default-domain XXX.com
disable the split-tunnel-all dns
Dungeon-client-config backup servers
the address value vpnpool pools
admin WeiepwREwT66BhE9 encrypted privilege 15 password username
username user5 encrypted password privilege 5 yIWniWfceAUz1sUb
the encrypted password privilege 3 umNHhJnO7McrLxNQ util_3 username
tunnel-group vpntest type remote access
tunnel-group vpntest General attributes
address vpnpool pool
authentication-server-group AD
authentication-server-group (inside) AD
Group Policy - by default-vpntest
band-Kingdom
vpntest group tunnel ipsec-attributes
pre-shared-key BEKey123456
NOCHECK Peer-id-validate
!
!
privilege level 3 mode exec cmd command perfmon
privilege level 3 mode exec cmd ping command
mode privileged exec command cmd level 3
logging of the privilege level 3 mode exec cmd commands
privilege level 3 exec command failover mode cmd
privilege level 3 mode exec command packet cmd - draw
privilege show import at the level 5 exec mode command
privilege level 5 see fashion exec running-config command
order of privilege show level 3 exec mode reload
privilege level 3 exec mode control fashion show
privilege see the level 3 exec firewall command mode
privilege see the level 3 exec mode command ASP.
processor mode privileged exec command to see the level 3
privilege command shell see the level 3 exec mode
privilege show level 3 exec command clock mode
privilege exec mode level 3 dns-hosts command show
privilege see the level 3 exec command access-list mode
logging of orders privilege see the level 3 exec mode
privilege, level 3 see the exec command mode vlan
privilege show level 3 exec command ip mode
privilege, level 3 see fashion exec command ipv6
privilege, level 3 see the exec command failover mode
privilege, level 3 see fashion exec command asdm
exec mode privilege see the level 3 command arp
command routing privilege see the level 3 exec mode
privilege, level 3 see fashion exec command ospf
privilege, level 3 see the exec command in aaa-server mode
AAA mode privileged exec command to see the level 3
privilege, level 3 see fashion exec command eigrp
privilege see the level 3 exec mode command crypto
privilege, level 3 see fashion exec command vpn-sessiondb
privilege level 3 exec mode command ssh show
privilege, level 3 see fashion exec command dhcpd
privilege, level 3 see the vpnclient command exec mode
privilege, level 3 see fashion exec command vpn
privilege level see the 3 blocks from exec mode command
privilege, level 3 see fashion exec command wccp
privilege see the level 3 exec command mode dynamic filters
privilege, level 3 see the exec command in webvpn mode
privilege control module see the level 3 exec mode
privilege, level 3 see fashion exec command uauth
privilege see the level 3 exec command compression mode
level 3 for the show privilege mode configure the command interface
level 3 for the show privilege mode set clock command
level 3 for the show privilege mode configure the access-list command
level 3 for the show privilege mode set up the registration of the order
level 3 for the show privilege mode configure ip command
level 3 for the show privilege mode configure command failover
level 5 mode see the privilege set up command asdm
level 3 for the show privilege mode configure arp command
level 3 for the show privilege mode configure the command routing
level 3 for the show privilege mode configure aaa-order server
level mode 3 privilege see the command configure aaa
level 3 for the show privilege mode configure command crypto
level 3 for the show privilege mode configure ssh command
level 3 for the show privilege mode configure command dhcpd
level 5 mode see the privilege set privilege to command
privilege level clear 3 mode exec command dns host
logging of the privilege clear level 3 exec mode commands
clear level 3 arp command mode privileged exec
AAA-server of privilege clear level 3 exec mode command
privilege clear level 3 exec mode command crypto
privilege clear level 3 exec command mode dynamic filters
level 3 for the privilege cmd mode configure command failover
clear level 3 privilege mode set the logging of command
privilege mode clear level 3 Configure arp command
clear level 3 privilege mode configure command crypto
clear level 3 privilege mode configure aaa-order server
context of prompt hostname
no remote anonymous reporting call
Cryptochecksum:447bbbc60fc01e9f83b32b1e0304c6b4
: end
Captures we can see packets going from the pool to the internal LAN, but we do not reply back packages.
The routing must be such that for 172.16.10.0/24 packages should reach the inside interface of the ASA.
On client machines or your internal LAN switch, you need to add route for 172.16.10.0/24 pointing to the inside interface of the ASA.
-
Cisco IPSec VPN works only one way.
I'm hitting my head against the wall for more than 2 weeks now. I can't get this figured out.
We have 2 locations and a server with an Internet service provider. Currently, we are connecting to our Internet service provider via a vpn ipsec to our headquarters. later, we will add the 1 direction.
The problem is the following. My vpn is in place, I can ping my local ip address, my IP of the tunnel, the remote tunnel interface, the vlan remote or the gateway, but I can't ping anything you wanted. The branch to the ISP I ping the router in the Internet service provider's domain controller and the server very well. but I can't ping or talk about anything either at the Office on the side of the IAF. and so I can not communicate with any host on the LAN. Can someone please help me with this?
Can I unload the configs of the two routers here someone watching?
Thanks in advance.
Exemption from the NAT on the end server must include the following reject order:
NAT extended IP access list
5 deny ip 10.1.20.0 0.0.0.255 10.178.164.128 0.0.0.127
Disable the ip nat translation before testing again.
-
I can find the Device Manager device under modems, but can't see it in my network connections. I want to make a shared service for internet, for a second computer connected to the host pc via an ad-hoc Wifi hotspot (that works).
I use IE 8 and windows XP on a Sony viao VGN-TX5XN.
Hello
I suggest you refer to the article below and check if it helps:
http://support.Microsoft.com/kb/870702
Also, check out the articles below and check if that helps:
http://www.Microsoft.com/windowsxp/using/networking/expert/bowman_02april08.mspx
The steps from the link below also applies to XP:
http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-computer-to-computer-ad-hoc-network
http://www.Microsoft.com/windowsxp/using/networking/setup/adhoc.mspx
Hope this helps,
-
Hello, after being forced to reformat my Mac, afterwards I reinstall the creativ cloud pour installer I my adobe software, adobe 19th monthly subscription, and I was charged January 7, 2016, Lun ID works, but confirms to me that I don't have any subscription adobe... How do I put my subscription on pour be able to have my software?
Thank you
Contact adobe during the time pst support by clicking here and, when available, click on "still need help," http://helpx.adobe.com/x-productkb/global/service-ccm.html
-
VPN connects but can't access internal devices
Thanks in advance for any help that can be provided.
I use AnyConnect to create a VPN with an ASA 5505. Once connected, the client needs to access a device behind a router in 1941.
Internally, (without using VPN), all my itinerary runs correctly. My VPN client can connect and when I put a route on my router from 1941, I am able to ping this particular device. But my VPN client cannot appear ping all the remaining devices on the same internal range as the ASA 5505 or whatever happened on 1941.
Device far router VPN Client ASA 5505 1941 Workstation
192.168.201.20---> outside IP x.x.x.x / / internal 192.168.101.1 192.168.101.56 192.168.101.2 / / 192.168.8.1 192.168.8.150
Client connects and get the IP address of the ASA
Cannot ping it cannot ping
Can ping the internal IP address of 1941
* (after creating a static route)
I was playing with my setup intensively to try to make this work. Split tunneling is enabled and is required.
Here is my current config:
hostnameMYHOST
activate mUUvr2NINofYuSh2 encrypted password
UNDrnIuGV0tAPtz2 encrypted passwd
names of
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
switchport access vlan 7
!
interface Vlan1
nameif inside
security-level 100
192.168.101.1 IP address 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
IP x.x.x.x 255.255.0.0
!
interface Vlan7
prior to interface Vlan1
nameif DMZ
security-level 20
IP 137.57.183.1 255.255.255.0
!
passive FTP mode
clock timezone STD - 7
DNS domain-lookup outside
the obj_any_dmz object-group network
192.168.101.0 IP Access-list extended sheep 255.255.255.0 allow all
192.168.201.0 IP Access-list extended sheep 255.255.255.0 allow all
tunneling split list of permitted access standard 192.168.101.0 255.255.255.0
pager lines 24
Enable logging
debug logging in buffered memory
asdm of logging of information
Within 1500 MTU
Outside 1500 MTU
MTU 1500 DMZ
mask 192.168.101.125 - 192.168.101.130 255.255.255.0 IP local pool Internal_Range
IP local pool vpn_pool 192.168.201.20 - 192.168.201.30 mask 255.255.255.0
ICMP unreachable rate-limit 1 burst-size 1
don't allow no asdm history
ARP timeout 14400
Global interface 10 (external)
NAT (inside) 0 access-list sheep
NAT (inside) 1 0.0.0.0 0.0.0.0
NAT (DMZ) 10 137.57.183.0 255.255.255.0
Route outside 0.0.0.0 0.0.0.0 x.x.x.x 1
Route inside 192.168.8.0 255.255.255.0 192.168.101.2 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
the ssh LOCAL console AAA authentication
http server enable 64000
http 0.0.0.0 0.0.0.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
Crypto ca trustpoint ASDM_TrustPoint1
registration auto
name of the object CN = MYHOST
ClientX_cert key pair
Configure CRL
string encryption ca ASDM_TrustPoint1 certificates
certificate 0f817951
308201e7 a0030201 30820150 0202040f 0d06092a 81795130 864886f7 0d 010105
05003038 31173015 06035504 03130e41 494d452d 56504e2d 42415455 53311d 30
1b06092a 864886f7 0d 010902 160e4149 4d452d56 504e2d42 41545553 301e170d
31333036 32373137 32393335 5a170d32 33303632 35313732 3933355a 30383117
30150603 55040313 0e41494d 452-5650 4e2d4241 54555331 1d301b06 092 d has 8648
86f70d01 0902160e 41494d 45 2d56504e 424154 55533081 9f300d06 092 2d has 8648
86f70d01 01010500 03818d 30818902 00 818100c 9 ff840bf4 cfb8d394 2 c 940430
1887f25a 49038aa0 1299cf10 bda2a436 227dcdbf f1c5566b c35c2f19 8b3514d3
4e24f5b1 c8840e8c 60e2b39d bdc0082f 08cce525 97ffefba d42bb087 81b9adb9
db0a8b2f b643e651 d17cd6f8 f67297f2 d785ef46 c3acbb39 615e1ef1 23db072c
783fe112 acd6dc80 dc38e94b 6e56fe94 d59d5d02 03010001 300 d 0609 2a 864886
8181007e f70d0101 05050003 29e90ea0 e337976e 9006bc02 402fd58a a1d30fe8
b2c1ab49 a1828ee0 488d1d2f 1dc5d150 3ed85f09 54f099b2 064cd 622 dc3d3821
fca46c69 62231fd2 6e396cd1 7ef586f9 f41205af c2199174 3c5ee887 42b684c9
7f4d2045 4742adb5 d70c3805 4ad13191 8d802bbc b2bcd8c7 8eec111b 761d89f3
63ebd49d 30dd06f4 e0fa25
quit smoking
crypto ISAKMP allow outside
crypto ISAKMP policy 40
preshared authentication
aes-256 encryption
sha hash
Group 5
life 86400
Telnet timeout 5
SSH 0.0.0.0 0.0.0.0 inside
SSH 0.0.0.0 0.0.0.0 DMZ
SSH timeout 10
Console timeout 0
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
SSL encryption rc4 - md5, rc4-aes128-sha1 aes256-3des-sha1 sha1 sha1
SSL-trust outside ASDM_TrustPoint1 point
WebVPN
allow outside
SVC disk0:/anyconnect-win-2.4.1012-k9.pkg 1 image
enable SVC
internal ClientX_access group strategy
attributes of Group Policy ClientX_access
4.2.2.2 DNS server value
VPN-tunnel-Protocol svc
Split-tunnel-policy tunnelspecified
Split-tunnel-network-list value split tunneling
access.local value by default-field
the address value vpn_pool pools
IPv6 address pools no
WebVPN
SVC mtu 1406
generate a new key SVC time no
SVC generate a new method ssl key
username privilege 15 encrypted password ykAxQ227nzontdIh ClientX
ClientX username attributes
VPN-group-policy ClientX_access
type of service admin
tunnel-group ClientX type remote access
attributes global-tunnel-group ClientX
address pool Internal_Range
Group Policy - by default-ClientX_access
type tunnel-group SSLClientProfile remote access
attributes global-tunnel-group SSLClientProfile
Group Policy - by default-ClientX_access
type tunnel-group ClientX_access remote access
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
!
global service-policy global_policy
context of prompt hostname
no remote anonymous reporting call
Cryptochecksum:da38065247f7334a5408b7ada3af29ae
: end
OK, lets go on... ;-)
Split tunneling: the ACL must include all the networks you want to join via the VPN:
tunneling split list of permitted access standard 192.168.101.0 255.255.255.0
tunneling split list of permitted access standard 192.168.8.0 255.255.255.0
NAT: Do not use 'everything' in the nat exemption, but specify all the traffic that should not be natted:
IP 192.168.101.0 allow Access-list extended sheep 255.255.255.0 192.168.201.0 255.255.255.0
IP 192.168.8.0 allow Access-list extended sheep 255.255.255.0 192.168.201.0 255.255.255.0
Routing: The 1941 needs a route for the vpn-pool pointing on the SAA (just in case there is no default route to the ASA)
--
Don't stop once you have upgraded your network! Improve the world by lending money to low-income workers:
http://www.Kiva.org/invitedBy/karsteni -
Ipad Cisco ipsec VPN connects but not access to the local network
Hi guys,.
I am trying to connect our ipads to vpn to access network resources. IPSec cisco ipad connects but not lan access and cannot ping anything not even not the interfaces of the router.
If I configure the vpn from cisco on a laptop, it works perfectly, I can ping all and can access resources on the local network if my guess is that the traffic is not going in the tunnel vpn between ipad and desktop.
Cisco 877.
My config is attached.
Any ideas?
Thank you
Build-in iPad-client is not useful to your configuration.
You have three options:
(1) remove the ACL of your vpn group. Without split tunneling client will work.
2) migrate legacy config crypto-map style. Here, you can use split tunneling
3) migrate AnyConnect.
The root of the problem is that the iPad Gets the split tunneling-information. But instead of control with routing traffic should pass through the window / the tunnel and which traffic is allowed without the VPN of the iPad tries to build a set of SAs for each line in your split-tunnel-ACL. But with the model-virtual, SA only is allowed.
-
VPN connection but can't map shared drive on the Client.
Hello
I have configure RRAS by using PPTP to serve as a VPN in Windows Server 2008 Server. I can connect VPN on my Windows 7 laptop.
Internet works fine, I can ping the IP address of the server. But I can't see the shared folders on the client.
Things I already checked.
-Network discovery is running.
-J' tried to access the server using the intellectual property and to appoint the two.
Any help would be appreciated.
Hi Zubair,
I suggest that you post the application on Microsoft TechNet forum because we have experts working on these issues. You can check the link to post the same query on TechNet:
http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer
Please do not hesitate to contact us if you have other questions related to Windows.
-
VPN works, but cannot access the LAN...
I have cisco vpn client connection to a 1721 at the office. the client connects and I can access the office LAN but but not the local network. I have the box checked in client vpn to allow access to the local network. Help, please!
Thank you!
Matt
Here is the config:
Current configuration: 3901 bytes
!
version 12.2
horodateurs service debug datetime msec
Log service timestamps datetime msec
encryption password service
!
Cerberus hostname
!
start the system flash c1700-k9o3sy7 - mz.122 - 11.T10.bin
AAA new-model
!
!
RADIUS AAA server group SERVERS RADIUS
auth-port 1645 192.168.69.1 Server acct-port 1646
!
AAA authentication login LOGIN group SERVERS RADIUS local
local NETGROUPAUTH AAA authorization network
AAA - the id of the joint session
!
username mattheff password xxx
username mikeheff password xxx
clock timezone CST - 6
clock to summer time recurring CDT 2 Sun Mar 2:00 1 Sun Nov 02:00
IP subnet zero
!
!
IP domain name heffnet.net
name of the IP-server 68.94.156.1
name of the IP-server 68.94.157.1
DHCP excluded-address IP 192.168.69.1 192.168.69.99
DHCP excluded-address IP 192.168.69.111 192.168.69.254
!
dhcp HEFFNET_LAN_POOL_1 IP pool
network 192.168.69.0 255.255.255.0
router by default - 192.168.69.254
Server DNS 68.x.x.1 68.94.157.1
!
audit of IP notify Journal
Max-events of po verification IP 100
VPDN enable
!
VPDN-group pppoe
demand dial
Protocol pppoe
!
!
!
crypto ISAKMP policy 3
BA 3des
preshared authentication
Group 2
!
Configuration group VPNGROUP crypto isakmp client
8mathef8 key
68.x.x.1 DNS 68.94.157.1
heffnet.net field
pool VPN_CLIENT_POOL
ACL 102
!
!
Crypto ipsec transform-set esp-3des esp-sha-hmac VPNSET1
!
crypto dynamic-map 10 DYNMAP
game of transformation-VPNSET1
!
!
list of authentication of card crypto VPNCLIENTMAP customer LOGIN
list of crypto isakmp NETGROUPAUTH VPNCLIENTMAP card authorization
crypto card for the VPNCLIENTMAP client configuration address respond
card crypto VPNCLIENTMAP 10-isakmp dynamic ipsec DYNMAP
!
!
!
!
interface Loopback0
IP address 1.1.x.x.255.255.252
!
ATM0 interface
Heffnet WAN/SBC DSL Interface Description
no ip address
No atm ilmi-keepalive
PVC 0/35
PPPoE-client dial-pool-number 69
!
DSL-automatic operation mode
no fair queue
!
interface FastEthernet0
Heffnet LAN Interface Description
IP 192.168.69.254 255.255.255.0
IP nat inside
IP tcp adjust-mss 1452
route VPN_ROUTE_MAP card intellectual property policy
automatic speed
!
interface Dialer69
MTU 1492
the negotiated IP address
NAT outside IP
encapsulation ppp
Dialer pool 69
PPP chap hostname cerberus
PPP chap password xxx
PPP pap sent-username [email protected] / * / password xxx
card crypto VPNCLIENTMAP
!
local IP VPN_CLIENT_POOL 192.168.70.200 pool 192.168.70.253
IP nat inside source list interface INTERNALLY Dialer69 overload
!
IP classless
IP route 0.0.0.0 0.0.0.0 Dialer69
no ip address of the http server
!
!
INTERNAL extended IP access list
deny ip 192.168.69.0 0.0.0.255 192.168.70.0 0.0.0.255
IP 192.168.69.0 allow 0.0.0.255 any
!
record 192.168.69.1
access-list 101 permit ip 192.168.69.0 0.0.0.255 192.168.70.0 0.0.0.255
access-list 102 permit ip 192.168.69.0 0.0.0.255 any
!
VPN_ROUTE_MAP allowed 10 route map
corresponds to the IP 101
set ip next-hop 1.1.1.2
!
alias exec s show ip interface brief
alias exec sr show running-config
!
Line con 0
privilege level 15
Synchronous recording
line to 0
privilege level 15
Synchronous recording
line vty 0 4
privilege level 15
Synchronous recording
line vty 5 15
privilege level 15
Synchronous recording
!
Scheduler allocate 4000 1000
end
Hi Matt,
The config looks good. Please make sure that you get a route to 192.168.69.0 255.255.255.0 network only after the connection to the VPN client. Please also correspond to the exit "route print" before and after the connection. One last thing, I hope that the local network is not 192.168.69.0.
HTH,
Please rate if this helps,
Kind regards
Kamal
-
Thunderbird does not work, but can not be uninstalled to allow the re-setup
I have recently updated Win10 but now back to win8.1 Thunderbird does not work (the version is 24.5.0) size of the program is 48 MB. I can't access to the program and it does not uninstall using the uninstall feature. Any helpful suggestions would be welcome.
Make a backup of your e-mail using Mozbackup data or simply make a copy of % appdata%\thunderbird\profiles.
Reinstall the Tbird. The last of them is Thunderbird 38.2
But if you prefer to use a former -
XP, re - install works but can not reach active state
Hello. I have two computers - 1 desktop and 1 laptop with genuine COA for Windows XP and Windows XP Home Edition. They run Ubuntu Linux for the last year or two, but now I want to reload XP on them. However, the WGA download does not work and now the key associated with the laptop is "invalid". Anyone can shed light on what do I do here?
You need to install from the original installation media provided with each computer. Key codes work with specific versions and are not interhangeable... Mike Hall MVP - Windows Desktop Experience http://msmvps.com/blogs/mikehall/
Maybe you are looking for
-
Black screen on Satellite Pro C870-1CJ
Good night I have a portable Satellite PRO 1CJ C870. A few days ago I got a blue screen showing display problems and since then, the laptop screen is black and there is no picture shown in it. I am entered mode secure and tried to connect it to a VGA
-
My watch connects the cloud. How to solve the problem
I associated with my new iPhone 6 s more the iWatch after reset. He was previously associated with my iPhone 5s and worked perfectly. The software on all phones are up-to-date and Bluetooth is on. My problem is that the watch disconnects from the pho
-
Windows 8 or 8.1 update? HP ENVY TouchSmart all-in - One desktop PC 23-d260qd
I just bought the HP ENVY TouchSmart all-in-One desktop PC 23-d260qd and it happens today. I wonder if it is better to upgrade to Windows 8.1 instead of windows 8. It seems that several people had problems with the upgrade. I just got my computer tod
-
To access the/sdcard-ext applications that allow only access /sdcard or/mnt/sdcard
Hello... I use a few applications that are their resources in the SD card, but I like to store my files in the external SD card. I am a user coming from the Samsung Captivate, so he has never been a problem for me, because the Samsung phones access t
-
HP Photosmart B109n - where will all of the ink?
This morning I changed my ink black and yellow with parts in expectation of some images of high quality printing on the map. After changing the ink cartridges, I find I have very poor quality; no black print. Then, I searched this forum for the bett