Palm tx only works with the charger plugged

Similar Questions

• Is Re: Satellite A500-17 X - it allowed to do work with the charger plugged?

  Is it OK to play games / work with the charger plugged into my laptop all the time or by doing this will cause the battery becoming weaker?

  I remember having a laptop earlier and 3 hours battery lasted only 30 minutes.
  This will happen to my Toshiba A500 computer laptop X 17 too if I had to plug my charger all the time?

  Should I get out the battery if you don't use?

  > Is it OK to play games / work with the charger plugged into my laptop all the time or by doing this will cause the battery becoming weaker?
  Yes you can do it and you should not be afraid that this will affect the battery!
  After that the battery has been recharged, the grief process stops and the battery is not looping
  My cell phone is always on the AC adapter at home and the battery is still OK and it work properly!

• Satellite A210 - 10 c only works with the 800 Mhz instead of 1.6 Ghz

  Hello

  I have a very big problem. One day, I look in Vista on my resource monitor and see that the max freuquence is only 50%.

  So first of all I think that is no problem because the assets 'energy savings' energy recorded.
  I have a Satellite A210 - 10 c portable.

  So I switch to maximum power and perform a test of prime95. But hell, the max freuquence has not changed. I also installed everest and cpu z, but all programs show the same to me:

  My laptop only works with the 800 Mhz instead of 1.6 Ghz!

  I'm looking for drivers for the AMD processor, but you need not for Vista. Update all the drivers of Toshiba and Programms and BIOS (in fact, it is the 1.9).

  Nothing helps.

  As a last test, I reinstalled Vista, but also did not help.

  And now I'm at a loss what to do.

  I hope someone can help me.

  Good bye...

  Have you installed the Vista using the recovery CD or the original CD of Microsoft Vista?

  I ask because the restore CD contains all drivers for Toshiba and yellow exclamation marks should not be apparently in Device Manager.

  If you used the original CD of Vista I think that you have not installed the Package of Intel Robson.

  I found the package of Robson on the Toshiba driver-> Satellite P200 area page.

  Maybe you should check this.

  Your comments would be appreciated

• PC does not work with the charger also

  My laptop is hard to give a beep, I know I need to change the battery, but the PC does not work with the charger also

  Original title: laptop Dell Inspiron M5030

  Hello

  "beep" codes normally indicate a hardware problem / failure.

  http://www.Dell.com/support/drivers/us/en/19/ProductSelector

  Go to the Dell website and look at the specifications of your laptop to see what BIOS you have

  Then read this on the 'beep' error codes to try to see what failed:

  http://www.computerhope.com/beep.htm

  http://www.pchell.com/hardware/beepcodes.shtml

  http://pcsupport.about.com/od/nonworkingcomponent/HT/beepcodestb.htm

  If you are unable to determine the hardware problem yourself, contact the manufacturer if under warranty.

  If it is not under warranty, find a good repair shop premises to take.

  See you soon.

• BlackBerry Z10 headphone only works with the left ear

  My headphones (beats studios) only works with the left ear when connected. The helmet has never had a problem on my old iPhone 4 and currently with my rMBP so I know that's not the headphones. Any suggestions?

  There seems to be a problem with the jacket of the head. They are defective for a few pieces and the jacket cannot recognize the HP in the same case, what makes the phone to give no sounds on the notification.

  Try to use different headphones. If the problem persists try replacing the model.

• Can I use the magnetic charger shows to recharge my iPhone or it only works with the watch?

  I'm looking to see if my Watch magnetic charger will also charge my iPhone. Can someone help me understand this?

  Hello

  Non - magnetic charge cable only works for load your Apple Watch.

• Dell Inspiron 17R 5720 does not work with the charger. Charger is not recognized. No problem with charger.

  My Dell Inspiron 17R 5720 does not recognize charger. And unfortunately my warranty expired 2 months ago.
  It was plugged and work in the morning, but then in the afternoon I noticed he was running on battery only. It does not start without battery (charger just plugged).

  1 this is what I did to debug. Me and my brother, we bought the same computers Dell laptops at the same time a year and a bit ago. That's why a debugging purposes, it was good.
  I took my charger and plugged into his computer. And it works. Certainly not the charger problem I guess. And when I plug the charger my computer, green light is still on the charger. And I have the original charger provided with the laptop.

  2. now, laptop is running on battery only, so that means that this motherboard works. I think so.

  3. the next thing I did was charger disconnected and removed the battery from the laptop. Then I pushed and hold the "Power" button for 45 seconds to pay a royalty to the flea market. Charger plugged in but laptop will not start.

  4. then I booted the laptop on battery, went to the BIOS and check if the charger is recognized in the BIOS. No, it does not recognize charger. So, if this isn't a charger so what else can we?

  5 laptop has no strange smells so I don't know if something happened with the motherboard, but I guess that motherboard is ok because it works battery.

  6. I was thinking of updating the BIOS, but I can't do it, because it will be not be updated then the laptop runs on the battery, it needs to be plugged.

  Now I'm stuck. I don't know what I can do. I'm willing to spend a little more money on it to try to fix.

  If someone had such a problem in the past please let me know what you have done and if it fixed it.
  Or if anyone has any other ideas, I will be happy and appreciated the help.

  Hello and sorry for this late post. Just had this problem... If there is nothing wrong with the AC adapter, it's a software problem.

  Close the laptop... Unplug the AC adapter / CC... Remove the battery... Plug the power adapter... Start the laptop... Go to the control panel... Find and select the Device Manager... Batteries, left click... Uninstall Microsoft AC Adapter, uninstall Microsoft ACPI compatible with battery control method... In fact, uninstall all you can under the batteries, but that should be all there is. It will be re - install when starting... Stop cell phone... Remove the AC adapter / CC... Replace the battery... Plug the power adapter... Start the laptop... Now, everything should be good.

• HP Pavilion dv7-6c02sm USB 3.0 only works with the 2.0 speed;

  Hello

  My HP Pavilion dv7-6c02sm has 2 USB USB 3.0 ports on the left site of my laptop. Currently, I installed these "sp55102" driver - Renesas Electronics USB 3.0 host controller driver

  When I connect my WD 1 TB USB3.0 ports chip I just get the message that he could run faster if I connect through a Super speed USB3.0.

  I tried all ports and all give me the same answer. I googled for a manual and myself made sure that my USB 3.0 are on the left side. And ports give me the same notification so I think it will be a driver problem. Could not find a better then sp55102.

  When I copy files, the left USB ports work at a lower rate than normal USB 2.0 on the right side.

  On the side USB 2.0 right arround 25 Mb/s and the left a USB 3.0 starts at 25 and plunges in 13-15 Mb/s

  I formatted my drive and installed new firmware for my external hard drive, but it does not solve my problem so I'm pretty sure it's a driver issue, but I can't find a more suitable, more recent and better driver.

  Product: A9X57EA #BED

  Help, please. Thank you

  Hello

  Ok... I've solved the mystery

  After hours hours of research online I thought that it is mostly a problem of windows 7 because windows updates are not installed to the end. In the end only USB worked with 3.0 but there was an optional windows update install and atfer install the optional update (which is dealing with something) the two USB 3.0 working at a speed of 120 MB/s

  Also, you should check your chipset on the following link

  http://www.Intel.com/p/en_US/support/idyp

  If you use the latest version on the drivers to install Renesas Electronics USB 3.0 host controller driver. I found this to be the last version USB3.0_allOS_2.1.28.1_PV

  
  So if anyone has the same problems with his speed USB3.0 and make the message "this device can perform faster if you connect it to a Super speed usb 3.0" is really the solution. You need to update your system with windows update and by that I mean, you want to be rushed to insatll everything to the system and upgrade your windows to the possible limit maximum!

• Uploading to FTP host... only works with the file of the Web server root

  When I download a Muse site to the root of the Web server, everything works as expected with the obvious comparison.

  But if I want to download on a file/folder existing... it doesn't work. Muse download files but no files are added on my Web server.

  I know how to add the path if I do something wrong or there at - it a bug somewhere?

  Thank you.

  I should add that the Muse site emergency or any html Web site doesn't not any sense. Backup is only valid for cms. And this isn't just a copy of the files in the site, it has a copy of the database. Muse has no database. Backup of the Muse - is file.muse, which can be placed anywhere.

• HP Pavilion dv6-black screen only works with the external monitor

  I discovered that my screen was not turn on yesterday when I tried to turn on my laptop. Fortunately I was able to plug it into an external monitor with a VGA cable and I have a monitor in my office, but I can not really be restricted to my living room or office to use my laptop.  Y at - it easy fixes to this, or is my only option to take it to someone with experience that replace the monitor for me?

  Hello

  Given the external screen display there are so few opportunities...

  -Sun display-project is a flashlight on the screen and check if you can see the bottom - if background is visible while it is the backlight in the LCD screen that needs to be replaced.

  - Display dark: if it is completely black and nothing is visible when you Flash light on the screen, then it is due to the LCD screen itself might be a broken screen (a cable that connects to the motherboard screen) or could be inverter LCD.

  If the laptop is still under warranty so I recommend you call HP tech support and they will be able to get it fixed for you.

• My company says that Firefox only works with the 3.6. It seems like if I'm really going back.

  I was unable to connect to the American Greetings Web site for displays. When I called their support, they said that I had to use IE. I HATE this show. They said that if I wanted to use Firefox I needed 3.6, I downloaded, but that was the way back. Can I do so that I have the current version?

  You are better to install Firefox Portable 3.6.25 on your hard drive so that a Web site and continue to use your current version elsewhere. The Portable version will install completely separate from your current installation. otherwise, if you install a 2nd 'ordinary' version, you need to tinker with separate 'profiles' for both.

  http://PortableApps.com/apps/Internet/firefox_portable/localization#legacy36
  
  Download and install it as you would with any program.

• Qosmio F10-105 only works with the 600 MHz

  Hello

  My f10-105 run only @600 Mhz! in the bios and in power options I have select provincy.
  the verse of the bios. East of 1.20
  someone at - it an idea?

  THX

  Hello

  Usually after the replacement of the motherboard, it may happen that laptop runs just at 600 MHz. In this case you should contact the Service partner. The firmware must be written again. If the partner doesn't to do this, the machine runs at a speed fixed Service 600 MHz.

• Satellite C55: microphone does not work with the connected headphones

  Hey everybody,

  I have a Toshiba Satellite C55. I've seen other forums posted on this topic, but none of the solutions seem to work for me. I tried to uninstall the drivers and restart the computer, and configure the microphone when the headphones are connected.

  My microphone (installed on the laptop) works completely fine... until I have plug in my headphones. He stops working, but I can still hear the music or friends through my headphones. They have a regular pair of Sony headphones, not headphones, so they do not have a microphone on them or anything. My microphone has never worked with the headphones plugged in, and the computer is only a few months old. I would really appreciate a clear solution, thank you for taking the time to look!

  What Satellite C55 do you have exactly?

  This laptop does support that one socket for headset and microphone, or you have two different plugs: one for mic and one for headphones?

  Usually, you can check the playback (speakers, headphones) devices and recording devices (microphone and external microphone) in the control panel → sound → playback (or recording) tab

  If you need to check if the internal MIC is set as device by default when the headphones are connected.

  In the event that the laptop uses the Realtek audio driver
  Reach
  Control Panel → Manager Realtek HD Audio → select Mic tab → click Device avancΘs
  Then select option button separate all entries in the independent input devices.
  Click OK
  Speakers of tray right click (Volume) then the recorders (confirm the microphone is active) → select microphone → click on set default (default device)
  Then close

• Leave the charger plugged

  I heard myths on both sides. Is it bad for the battery if I leave my charger permanently connected?

  I have a aspire s3 ultrabook.

  Batteries may have a cutoff point, but with the charger plugged in, the battery is not used.

  I can also speak from experience. People who leave their always connected laptops have a reduced autonomy than those who regularly use the battery.

  To be fair, the batteries are better now that they used to be, but they still have to pay from time to time.

• PALM TX will turn on and work with power cable plugged but not when disconnected?

  Hello all-

  I have a PALM TX, who bought in 2005. It worked fine but I changed my position and my last job stop supporting. That being said, I can use now and have recently it turned on and loaded schedule, etc. However, it does work when I plugged in the power cord. It works very well with the connection, no problems. That said, once disconnected from the power source it not light?

  I finished the soft reset several times. With reconnected to the power cord it works fine. However, it still not work with the power cord?

  I was reading online in various forums and it seems like it might be my power button?

  Does anyone else have this problem?

  Any ideas or help would be greatly appreciated that now I can use and really want to use it to its full capacity.

  Thank you!

  Joe

  The connections of welding of switch on the motherboard have been a little weak on the TX line.

  It seems to me that the battery is dead.  The TX can also turn on by pressing the front buttons.  Try to press one of them and see if it lights.

  There are several online sites for repair and PDA batteries.  TX peut battery be user servicable, although it is a little intimidating for a novice.  If you Google 'Palm TX battery replacement', many hits will occur as well as how to videos!

  WyreNut