NB200-10Z - WLan and Lan connection problems

Similar Questions

• Satellite C850-B820: WLan and LAN connection limited

  I bought satellite c850-b820 part No. PSKCEV-04P00FAR (without BONE) 3 months ago.
  I installed 8 64-bit windows and installed the drivers from the Toshiba site.
  It works perfectly.

  A week ago from the problems starts since I installed the update of the Bios via Toshiba service station.
  First of all the wireless limited connection (unable to connect to the internet).
  A day after the ethernet also limited connection (no internet connection)

  Tests to diagnose and repair failed even re installing the drivers.
  After formatting the computer and re install windows and drivers but without success.

  Automatic diagnosis and repair does not solve the problem but the computer restart again and again. I thought that the problem of the OS, it is why I installed windows 7x64bit with its pilots.

  It works since yesterday but wireless.
  Mention that I tried F12 it means wireless works but actually does not work.

  Help, please

  Now, you use the Win 7 64 bit. Right?
  WiFi does not work but the WLan card is recognized in Device Manager?

  Have you tried to install the WLan driver right?

  I guess that the WLan card isn t working because the correct driver WLan isn't installed.
  I think that the laptop supports the Realtek 802.11b/g/n Wlan / Bluetooth module drop-down list.

• Satellite L650/1MC - WiFi and LAN connection keep dropping out

  In the last two weeks, that my wifi connection dropped regularly - only a reboot solves the problem. Because it became so frequent (and boring) I returned with an ethernet cable, which worked OK for a few days, but tthat hen started making the same thing: no internet connection.

  I must emphasize that my other active wifi (android and android phone Tablet) kit continue to connect to internet via wifi etc, even when the connection of the laptop has fallen. This leads me to suspect that the problem is mobile partner no router etc. relates. The laptop is rarely used on battery, so I do not have the power as a problem management.

  I have a Satellite L650/1MC running W7 64-bit. I made no changes to my system recently which may give rise to this problem - everything works perfectly until a few weeks before.

  I checked for updated firmware updated on my router in the case where it is the question - it's not.

  Any suggestions to fix this annoying would be welcome!

  > I checked for updated firmware updated on my router in the case where it is the question - it's not.

  Have you tried to reboot the router?
  Since the two connections (LAN and WLan) stops falling, I think that the router is the problem.
  OK, two other android devices seems to work properly but the fact is that router shares automatically and possibly IP addresses, the IP address cannot be assigned correctly.

  However, you can check the WLan and LAN TCP/IP protocol settings.
  Uninstall the TCP/IP v6 and use only the v4 TCP/IP for LAN and WLan.

  Also ensure that your security programs (firewall & anti-virus software) don't affect the internet connection.

• WLAN and LAN on Satellite U500 connectivity issues

  I have a Satellite U500 laptop, the problem is that I have never connected to the internet, even if the modem works well in other devices such as mobile.
  I'm trying to connect to the internet automatically and manually. It s always saying limited connectivity or local only.
  I ve checked the driver for my wireless and LAN cards and everything works correctly. Then I plugged as the hub of LAN or Ethernet cable, sound correctly connect the laptop to the modem, but I checked the free config or a physician any link is in x.

  I followed the steps but it s not solved my problem.
  I hope someone can give me an advice.

  Somehow it seems to me that you have a problem with your router.
  Restart your router, and then try again.
  I can understand if there is a problem with the WIFI but LAN should work without any problem.
  When you connect the network cable to your laptop is green LED ON?
  Does not yellow LED flashes?

  BTW: do you use the operating system preinstalled (factory State) of origin?

• Photon: Dropped calls and network connectivity problems

  I bought my Photon August 18 and he was not long for me first to the problems with network connectivity.

  The phone displays signal on the phone, but when you try to call, send text messages or surf the web. Zilch.

  A soft reset works every time. I've had some experience with the issue of the "appeal of ghosts", but had no network connectivity so often that he was too much a problem. Restores the soft 3-4 per day.

  I took the phone to the Sprint store and they told me that my phone verified and were not hardware problems that may be found. I said at the time on the update of the software of MR5 and was anxious to see how the phone after the update.

  I received the update on Wednesday and the phone worked fine. No appeal of ghost, no network connectivity not problems, only dropped the call.

  Now, Friday morning, I lost network connectivity despite seeing the strength of the signal and had to perform a soft reset to regain connectivity. My wife and I bought this phone at the same time. She had many calls interrupted before the update and we both experienced after that update eventhough signal showing on the phone is at least two if not more bars.

  Is this a known issue? Is it going to be/CAN this be corrected by a software update? Is this phone a lemon and he'll remember?

  I LOVE this phone. I don't want to get rid of it, but...

  Seriously. It's a phone! Making calls should be the FIRST thing that is done right.

  Please, someone, Motorola, reassure me that this isn't a lemon and that network problems are going to be fixed. I CAN wait, but I don't want to get stuck with two phones for $200 that need to be pampered just to be usable.

  Thank you

  TC

  Yes, it turns out that be was a buggy phone. Two stores tested Sprint phone for reception of the signal and they said that it spent; but as said the technician in the second store, the tests they take place the phone in ideal conditions.

  The two stores I've visited, said they were ready to replace the phone, but my first visit came just before the MR5 update software while I was willing to wait to see if the update corrects the problem. It didn't, but the replacement of the second store phone works fine with upgrading to MR5 and really no problem.

  I'll go ahead and mark this question as a response, but if you experience the same problems of chance complete loss of all network connectivity (Sprint or otherwise), I recommend getting the phone replaced. It is a bad camera.

  Oh and the technician at the second store mentioned the network problems. It has been a problem for them, but the most telling proof of the issue of network is random dropped calls. So if from time to time, you lose a call under the conditions of good network signal, it's probably not your phone and Sprint. I have almost that many abandoned calls as of late, so it could have been the wrong phone I had that really amplified the problem... or... Sprint has got some of the bugs in our region.

  Thank you for looking in. I hope that your problems are as easy to solve as mine and I hope that you are still within your 30 days so that you get a new replacement.

  Best wishes

  TC

• WLAN and LAN can not work together...

  I have a ProBook 6550 b with LAN, WLAN, WWAN...
  Control software and software packages, all and of course - BIOSupdate regularly!
  And some other user and I found BIG BUG (Limitation in work procedures)...
  In BIOS v F.20 LAN and WLAN cannot work at the same time! Work or WLAN or LAN, but not work WIFI + LAN...! ;((
  When worked tent cabe coonect LAN WLAN! - WLAN is auto turn off... When LAN cable unplugged - WLAN is coming!
  But LAN + WIFI - cannot work at the same time...
  This is case is not in the BONE, not in Utils or driver... I test in slot Win, Unix, and LiveCD...
  And always works as I describe above.

  It's LIMITATIONS of the BIOS! WHY?

  in this key WLAN worked
  

  in what I cable pluged LAN and WLAN is disabled auto-personnes ((())
  

  in this I unplug the LAN cable and WLAN came get IP by DHCP and back...
  

  P.S. in BIOS vF.07 everything works! LAN + WIFI = WORK, but in v F.20 and last v F.21 - NOT WORKED!
  And BIOS v F.20 can't downgrade! ((( Ou Posible? )))
  Make POsible NEW BIOS WORKING? (a few years ago some MSI people! and I completely reasemled BIOS for my old PC..)
  P.S. Can you say which module in 68CDE. BIN necessary to replace the old version?

  For example — 37946B 52 - EC4B - 46AF - AB83 - 76DBBE1E13C4_1_757.ROM this is a LOGO
  and 7BB28B99-61BB - 11 d 5-9A5D - 0090273FC14D_1_408.ROM too LOGO in other BIOS...

  What v F.07 ROM can get him back and everything be WORKED! In the BIOS about 400 Roma modules...

  

  ANY BODY CAN help?

  Hello:

  Take it easy...

  Go into your BIOS, then the menu of device configuration, modify the LAN/WLAN, transition from active to disabled. Save the setting it by hitting the F10 key and again when you go out.

  The two are now on at the same time.

  Paul

• WLAN on P100 connection problems

  I've just set up a Netgear router to my main computer and attempted to go wireless on my P100.
  My router signal is be picked up on the laptop, but when I try to connect, I get the message.
  "Another application of sellers is to control the wireless adapter.

  Any ideas how I can fix this problem?

  ConfigFree connectivity doctor is tool for LAN and WLAN monitoring and not for any type of setting up connectivity.

  If you want to configure WLAN settings you can do this using the WLAN Windows preinstalled OR Intel PROSet WLAN Client settings.

• Speed of the satellite - 12L - C850D slow WLAN and LAN

  Help please

  I C850D - 12L running Windows 8.1 and as far as I know, have all drivers up to date according to PC world.

  I am not receiving the correct speeds both hard and connectivity wireless. Should get 30 + bottom and 10 upward but getting 10 down and 5 up.

  I did the usual stuff of BT and they are on the case - they say that my hub receives correct speeds and suggests that it is my drivers?

  Another laptop received very good speed of my hub. HUB is the latest issue of BT

  Happy new year

  > I did used * BT stuff * and they are on the case - they say that my hub receives correct speeds and suggest it's my drivers?

  I m really confused. You're talking about BT (I guess you mean Bluetooth), but this Toshiba laptop can't stand NOT BT's
  The device is equipped with a Realtek RTL8188CE WLan card 802.11b/g/n and with LAN Fast Ethernet 10BASE-T/100BASE-TX card.

  But he can't stand BT

  So could you please provide more details or could you clarify this misunderstanding

• Satellite Pro C665 and internet connection problems

  Hi, will try and give as much information as I can, so sorry for the long post.

  I bought this new laptop in August is so very old, I connect to the internet with modem USB 3 G telstra and a cycle of 3 weeks he began to abandon the connection within 30 seconds approximately.
  The blue LED on the identification of the USB modem still flash, it has a connection, but I would get the yellow explanation mark on the icon of internet connection in the task bar.

  Now, the only way to recover the connection must close the connection of Telstra, unplug it, plug it back in and reconnect, a few times I have to reboot and will have to go through this routine 5 - 6 times and sometimes up to 10 attempts before I get a stable connection.

  So first I thought it might be the USB modem, so I got a replacement of telstra, but made no difference, then I had a replacement sim card and still no luck.

  Then I did a new install of Windows 7 and installed all the current updates, still no go.

  I then bought a wireless router to eliminate the USB connection and still have the same question.

  Sometimes it can be very frustrating trying to get a solid connection, but once it gets a good connection, it will stay connected for hours without any problem

  I'm not an expert with computers, but can usually find a solution to problems of software, I have, but that left me speechless and I think I've covered most of the region to address this.

  Thanks for your time.

  Unfortunately I can't say anything on Telstra 3 G USB modem. Toshiba doesn't support third party hardware, software and does not offer any kind of support.

  I put t know where you got this USB modem but I m wondering you didn't visit their store and test in functionality it bring your laptop with you. The people who work there could make inspection on site.

  I also put t know why you have this problem at home. Your router is not known to us, but is there a difference when using WLAN secure or unlocked and without password?

• Satellite L300 - 20 d - need drivers Vista WLan and LAN

  Hello

  I recently have a problem with my laptop, it ran very slow.
  So I tried it pop in recovery and restore it to factory settings.
  He wouldn't have it.

  So what I need is I went out and got the Windows Vista operating system and put it on the laptop.
  He came good, but it did not find my wireless, or drivers LAN,.

  I searched the internet for drivers and still no luck.

  Can anyone suggest anything that will help me

  Thanks to tip x

  Hello

  All the drivers, tools and utilities that you can download at Toshiba download page http://www.toshiba.eu/innovation/download_drivers_bios.jsp
  Driver LAN you can find here.
  WLAN driver can be downloaded from http://aps2.toshiba-tro.de/wlan/
  I don't know exactly, but your laptop computer has Realtek or Atheros WLAN card.

  By the way: a long time ago I ve installed Win7 32 bit on friends L300 and it still works perfectly.

• Satellite L450D: Windows 7 and Netgear connection problems

  Hello

  Ive recently bought a Toshiba Satellite L450D but I can't connect to a netgear wireless account...
  It works fine on another laptop and my toshiba can connect to an account of different eircom without problem...

  What is the new Windows 7, which is not compatible with the server or do I have another problem!

  Thank you! :)

  Hello

  What you mean with Netgear wireless account exactly? Do you mean the router Netgear WLAN?

  Normally, you can connect to each WLAN router. It makes no difference which manufacturing, you have the router but factory settings are different, this means that some routers have DHCP and static IP addresses, for example. I think you should check the TCP/IP configuration and update the WLAN driver.

  Check for an update WLAN Portal: http://aps2.toshiba-tro.de/wlan/

  Good luck! :)

• Satellite A300 and wireless connection problems

  Recently, I had to use my recovery disk and restored my laptop to factory settings. Almost everything is back is the way has been, except for a small problem.

  The WiFi does not work. It is on, but when I go to connect to the wireless family network, it tells me to insert a cable.

  My laptop is the Satellite A300 - model psagca.

  I install the drivers of Realtech and still not get the case.

  Thank you in advance.

  Your wireless network is not visible to your laptop satellite?

• Satellite A105: External HDD USB and IPod connection problems

  Hello

  I have computer laptop toshiba satellite A105, last weekend that I have reinstalled windows on my laptop using the recovery discs, and now I had two problems.

  First problem when I connect my external hard drive, my computer show no icon of this hard drive, but when I check in the management-disk external hard drive is connected to my computer.
  Second problem is my IPod, a similar problem on the hard disk indicates when is connected to my laptop but when I checked in the device under usb controller Manager appears, but with the yellow circle and question marks.

  Could you help me to solve my problem?
  What about the Kings
  Wojtek

  Hello

  Have you tried to update the drivers of USB port?

  You should try this;
  -Disconnect all USB devices the USB ports.
  -Go to the Device Manager and remove all the USB root hub and all USB host controllers.
  -Restart the laptop

  After this procedure, the Windows operating system should recognize and should install the USB ports again. After restarting again you must connect only USB devices and must verify if they will work properly!

• WiFi for computer laptop HP ENVY 15 and Ethernet connection problem

  Hi, a few months ago, I brought a HP ENVY 15 Notebook PC running windows 8.1. It is connected to my wifi with Ralink RT3290 802.11bgn Wi - Fi adapter. My modem is a Technicolour TG582n 2 Wireless ADSL + with wireless 802.11 b/g/n compatible.

  As soon as I got there I noticed a problem of internet where I would be able to connect to my home WiFi network and get full reception bars but would have a hard time to access Web sites on web browsers such as chrome, mozilla and internet explore pages takes some time to load and eventually reached a page "this webpage is not available" (for chrome). This problem seems to occur only with my home network as it can connect to public wifi and my wifi friends and yet I have many other devices such as laptops and other smartphones connected to my wifi that did not at all have poblems with internet and it just seems to be mine. When I connect via ethernet I get good connection for about 10 minutes and then I was completely cut off. However, I can upload a file via the wifi ok if I can get it to start and I can play a game online well enough but often disconnected after an hour or two.

  I checked for new updates of pilot, but they seem to be up to date and im do not manually downloading and installing one on the hp site but I tried (I did probably wrong). I ran the diagnostic function, but it cannot detect all problems. I looked around the internet as well, but still havn't found a solution.

  Also I got the laptop sent back and received a new but the same problem persisted and as I walked through the process of the person I was talking to a admitted that I had a problem like they remote limited from my laptop for a little for the access problem.

  Please help, I've had this problem for a month or two now and is really becoming a problem since I use my laptop computer for purposes of requiring home internet work.

  Thanks in advance and I hope you guys can help!

  Hi @Eugene5 ,

  Welcome to the HP Forums!

  It's a great place to find answers and information.
  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums Learn how Post and more

  I understand that you have a problem with your connection Wireless at home. You are able to connect with full bars but are unable to access the web.   When you're lucky hours just access the Web, you can make a download if you get started in time or play games online for one or two before again declining. You ran the diagnostic function, but no problems were. You had the phone replaced for the same issue, but the replacement has the same question.

  You know your network is an 802.11 G or 802.11n.   How do I know if my WiFi connects using 802.11n (as superuser)

  Please check this setting.

  1. Open the Device Manager
  2. Click the network adapters to expand the list
  3. Right click on the Ethernet connection, and choose Properties
  4. Click the power management tab
  5. "" Please check that ' allow the computer to turn off this device to save power "is not checked.
  6. Repeat this process for all types of listed under network adapters.

  .

  What does your wireless card is supported?

  Here's a link for How to fix little or no Wi-Fi connectivity issues in Windows 8(of fixedbyvonnie) to help you.

  If you need further assistance. Please provide your exact model of HP laptop and your operating system.

  How can I find my model number or product number?

  Good luck!

• Two PC on the lan connection problem

  I wanted to connect two PCs using lan via the TCP protocol. I run a simple customer data and simple data on my PC server. But when I opened the single database server on my PC and the client of simple data on the other PC then error 63 I think it's error.tell buffer overflow series me what I'll do. is it necessary to configure listening TCP by double clicking it and give it some values? I am new to networking so can not debug the error.plz tell me what to do? Also should what changes I to VI Server? Which port number should I enter?