LAN with WRT54G problems

Similar Questions

• NAT on Xbox Live with WRT54GS problem

  I have a WRT54GS v2 and I tried to solve the NAT problem I had whenever I have test Xbox Live.  I felt like I've done the research so much on this and I can not get it out of a moderate or strict NAT.  I did the port of release for the 88 and 3074-port, feature disabled the "block internet anonymous requests" and updated to the latest firmware and I have nothing will open the NAT.  This is the first time that I ever had a NAT problem with a Linksys router hooked up to my Xbox 360 and I want to know once and for all, what steps I must take to open the NAT.  Can someone please... Please... Please give me some instructions step by step on how to open the NAT?

  First upgrade the Firmware of the router... Download the Firmware from here , after downloading the firmware, you must update the firmware...

  Follow these steps to upgrade the firmware of the device: -.
  Open an Internet Explorer browser page. In the address bar type - 192.168.1.1
  Let the empty user name & password use admin lowercase...
  Click the 'Administration' tab - then click on the 'Upgrade Firmware' under the tab-here, click on 'Browse' and navigate the .bin firmware file and click on "Upgrade"...
  Wait a few seconds until it shows that "the update is successful," after the upgrade of the firmware, click on "Reboot" and you will be returned to the same page OR it will say 'cannot display the Page.

  Press and hold the reset for 30 seconds button.
  Then, unplug the Dungeon to be able to hold down the reset button for another Seconds.Plug 30 the power back in and hold the reset button for 30 Seconds.Release the reset button. Now, you will need to reconfigure your router...

  If your ISP is cable follow this

  If your ISP is DSL follow this

  For X - Box: click on the tab "Games and Applications" and then click the sub-tab "Port Range Forwarding"...

  (1) on the first line in the box, type Application in the Xbox, in the start box, type 88 and type of box in 88, leave the Protocol as and under type 192.168.1.20 ip address and check the box to enable...

  (2) on the second line in the box of Application in Xbox1, in the start box, type type in 3074 and end in 3074 box type, leave the Protocol as and under type 192.168.1.20 ip address and check the enable box and click on save settings...

  (3) once you return to the game to the top page, click the Security tab and uncheck block anonymous Internet requests and click on save settings...

  4) click on Setup and change the size of the MTU to 1452 and click on save settings...

  (5) now assign the IP given on your Xbox
  Go to the network settings on your X - Box, then go to the settings of IP address and select manual ip/static ip and enter in this

  IP address:-192.168.1.20 default :-255.255.255.0 gateway/gateway/router subnet mask:-192.168.1.1... Save settings...

  (6) also assign addresses dns on Xbox
  Primary DNS:-4.2.2.2... Secondary dns:-192.168.1.1... Save settings...

  (7) turn off your modem, router and Xbox... Wait a minute...

  (8) plug the power to the modem first, wait a minute and plug the router power cable, wait another minute and turn the Xbox and... test it connects...

• Help with WRT54GS on FiOS (ethernet, no coaxial cable)

  Hey guys, I'm new here and just try to get help with this insoluble problem that I started having with my Linksys WRT54GS and Verizon FiOS last week.

  To simplify my story complete and real question here, I put it all points to try to make it simpler to understand:

  -In the fall of 2007, I switch from Comcast to Verizon FiOS after getting screwed on waiting for two weeks and never get a new router, that one was fried in a storm

  -Little brother spills the first Actiontec router and it breaks

  Actiontec wireless - replacement of the router is non-existent (MI42WR)

  -After trying fill the Linksys for the Actiontec, it turns out to be a pain much more than a real solution to the lack of wireless

  -Past of the coaxial cable to the full ethernet cat5 last year to use Linksys WRT54GS
  -Fortunately directly connected to ONTARIO to Linksys WRT54GS via ethernet cat5 for a year while the wireless is perfect for other computers

  (last week)

  -Off router Linksys for a night the week last to give him a night's rest
  N ' unable to connect to Verizon with WRT54GS old or new router WRT54GL (which I'm now back)

  -HAVE ethernet light outside still has a green light indicating that it is working
  -Do not fill the Actiontec and Linksys again
  -I don't want to go back to the use of the Actiontec for what anyone, but stuck with it for now
  -A reset the router, computer connection and DHCP has published many times, but nothing helps

  -A updated my WRT54GS firmware before you type this and still nothing

  -No connection to any Linksys router, but the works of Actiontec

  I can't think of a solution except maybe try one of another company, as D-Link... (sad face) I'm already back the new router Monday, since I don't believe that my WRT54GS is broken even if it is not connected. If I don't think that maybe Verizon has done something that is not allowing one of my Linksys routers to connect, because fortunately, they started to charge me an extra $10-12 on FiOS bill without notice. Although at this stage, I have a hard time believing that even switch to another router company and use their products will do everything for me...

  Right now, I am suffering with this router Verizon terrible stock and my parents and aunt are complained about these last two weeks. I hope that someone here knows what may be the real problem that can sound with little assistance.

  Ah, found the solution work for a guy who had exactly the same problem as me, but with a D-Link router.

  "The best solution is to go to the ethernet connections and click Cancel, the green light on the actiontec to go yellow, unplug it in this State." Disconnect the battery power and the BBU. Put the new router in place, reconnect battery and BBU, then taken power for the new router.

  Just releasing and switching router should work but if it is not these steps work. »

  Thank you for at least trying to help me to abandoned.

• Wireless Internet does not work. I get the error: "no operations can be performed on the LAN with its media disconnected in CMD".

  Hello, I followed the steps in the previous thread... Thank you.

  Im getting the message "no operation can be performed on LAN with its media disconnected in CMD"... help.

  My wireless will open any Web pages, although it seems to be connected and trouble shooter saying "DNS does not.

  original title: "DNS does not.

  Hello

  1. don't you make changes on the computer before this problem?

  Step 1: Make sure that switch WLAN is not turned off. To do this, you may need to consult the manual of the computer.

  Step 2: Reset the TCP/IP and WINSOCK stack.

  1. Click Start and type cmd in the box start the search.

  2. right click on cmd in the list programs and then click Run as administrator.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue

  3. at the command prompt, the following line, and then press ENTER:

  netsh winsock reset catalog

  netsh int ipv4 reset reset.log

  netsh int ipv6 reset reset.log

• Cannot access a remote LAN with Cisco Client

  Hello

  IAM using an ASA 5505 and connect with the Cisco Client 5.0.02.0090. The Client connects to the Remote LAN and get an IP of the SAA.

  But I can't access the Remote LAN or ping the Interface of the ASA trainee.

  Can someone help me with this problem?

  If the client computer is in the same subnet as the other PC, then its dislikes a question ASA.

  Just make sure that the client computer is in the subnet, default gateway of 192.168.20.100 192.168.20./24 and connected to a switchport on vlan 1.

  Finally, check whether the DNS resolution works, or if you can browse the internet with the ip address.

• Computer format Microtour HP Pro 3010: Hp Support Assistant and LAN with Proxy authentication

  Dear friends,

  I would only know if and how I can 'use' Hp Support Assistant in my office desktop pc, because my desktop pc itself works in the breast of a LAN with proxy authentication.

  Thank you, Paolo ([Personal Information Removed)

  Hello

  Welcome to the HP Support forum!

  Yes, you can use it as long as the desktop PC is HP branded.

• Verizon said I can be faced with one problem with my browser and don't charge but ATT, gmail and other

  Tried loading Verizon homepage, but it says I can be faced with a problem with my browser. ATT, gmail between other fine load and Verizon was very well for some time now, what should I do? I'm not tech savvy so please keep it simple for me, thank you.

  Try to clear your browser's cache.

  Firefox button or tools > clear recent history... - details and of course Cache hit only is selected, and then select all and click the clear now button.

• Presario SR1463CL with drivers problems

  Please be tolerant of beginners.

  I purchased a SR1463CL to add to a DELL Dimension - old but never fails. -the HARD drive was crushed. I replaced the HDD Samsung with Western Digital. I have replace the dial-up modem. All this without problems. I installed Windows XP Pro and SP2 update. My system detects "New hardware" drivers VGA Compatible and multimedia controller. I have had no success finding the right drivers and their installation. My monitor works find, but I have no sound.

  Poster 'sounds, video controllers' Device Manager with the problems. Initial device showed sound and audio by default to the Modem. I removed which and at this point no device is indicated.

  Device Manager shows no driver found for new hardware and online search has failed. Windows Update detects any is available. I checked on the resource one manufacturing line have failed in my downloadsfrom RealTek and Nvidia.Dial - up has had major periods and material has been identified as there's no way for the system. Previous owner had made the back-ups-DVD-but they went "purple haze" and could not be read. That's why I installed XP Pro.

  My modem does not work on and additional time. It will connect and funtion but after a few minutes I'll get "Page not found" displayed.

  So, I use my Dell Dimension for internet troubleshooting. Any help is greatly appreciated.

  Respectfully.

  "Submariners do it deeper."

  Thanks for the information. Due to serious conflicts resulting from auto-updates from microsoft, which I had to reformat the HARD drive and have located since the necessary drivers to the www.sis.com for VGA and www.realtek.com for audio AC 97 readers to be precise. Manually review and choose downloads in the future.

  "Greens, all councils prepare to dive."

  Thanks again for your help. It is greatly appreciated.

  Bamabubblehead went to the abyss.

• My macbook air running hot and the battery drains quickly can help you with this problem?

  My macbook air running hot and the battery drains fast is a 13 ", at the beginning of 2014.  Processor 1.4 GHz intel core 15Can you help with this problem?

  Apps can affect the performance of Mac, battery, temperature and fan activity - Apple Support

• just installed new update for itunes. When I go to the page stoe it flashes really hurt. anyone with this problem. is there a solution?

  just installed new update of itune. When I go to store the page, it's really bad flicker.  anyone with this problem. is there a solution?

  Widely not reported, no known resolution until Apple release a new version of iTunes that affects it.

• two drivers of PXI chassis with Configuration problem

  Hello

  I have two PXI chassis. One is PXI 1033 and works perfectly with the NI PXI-5404, 5105, 6509, 1409, installed 8336. The other is 1036 PXI with the PXI-5404 NI, 8366 installed. When I was trying wreath connect, as master 1033, 1036 as slave, I found several problems.

  1. in the Measurement & Automation Explorer, does not have my good guys in 1033. Instead, there is a sign of the Red Cross in bottom right with 6509, 5105, 5404.

  2. I can't find an another 5404 of the 1036. In fact, I can't find 1036 in MAX.

  Update BIOS. My PXI system is already identified under the name 'NOR PXI - 1033 Embedded MXI Express' and Chassis1 is identified as 'NOR PXI 1033'.

  So I made several tests as below:

  1. unscrew the 5404 1036 slave. MAX can configure 2 1036 chassis. Ok. But when I reconnect 5404 in 1036, same result happened as stated above.

  2 uninstall the driver of 5404, so the 5404 in 1033 does not either now. And then reboot again, same result happens again. Cannot detect the 1033 chassis. Other vouchers in 1036 don't work either.

  Please, any suggestion is highly appreciated.

  Sincerely,

  Bin

  Hi Ben,

  This happens sometimes with MXI-Express:

  Error code 12 with MXI-Express

  http://forums.NI.com/T5/PXI/two-PXI-chassis-connection-with-configuration-problem/m-p/1475876#M9033

  In general, you can read this error 12 means on Device Manager:

  Explanation of error codes generated by Device Manager in Windows XP Professional

  http://support.Microsoft.com/kb/310123

  If it was a problem of bandwidth, PCI or PXI side, you could pull a few cards to see if that alleviates the problem, or that the link from Microsoft over the States, you can disable the driver for other cards.

• When you install the 2007 Microsoft Office Suite Service Pack 2 (SP2), I still received the error code 646... I tried to download the RegCure as advised, but the problem still exists... Please help me with this problem... Thank you

  Ideas:

  • When you install the 2007 Microsoft Office Suite Service Pack 2 (SP2), I still received the error code 646... I tried to download the RegCure as advised, but the problem still exists... Please help me with this problem... Thank you

  I tried to download the RegCure as advised, but the problem still exists...

  Who advised you to 'download... '. RegCure? Doing so could only worse issues! If you ever think that your registry database must be cleaned, repaired, boosted or optimized (it isn't), read http://aumha.net/viewtopic.php?t=28099 and draw your own conclusions.

  See http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/6e716883-7af4-4a9f-8665-2f4dd57eee8d ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I have a frozen screen of Active recovery of white desk with a mouse. I think that the computer is frozen upward with a problem of recovery? Right?

  I have a frozen screen of Active recovery of white desk with a mouse.  I think that the computer is frozen upward with a problem of recovery? Right?

  How can I fix?

  Hello
  • What were the changes made before the problem occurred?

  You can try to restart the computer and check if it helps.

  If above does not help, you can read the following steps to disable the active desktop on the computer and check:

  a. to disable Active Desktop.
  b. right click on an area empty office, point to Active Desktop, and then click view as Web Page to clear the check box.
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/ie4_turnon_active_desktop.mspx?mfr=true

• I need a list send me Windows based utility of magnification for XP, am a MSN user with vision problems and cannot zoom in easily on what I have.

  I need a list, sent me to my XP Windows-based magnification utilities, am a user of MSN base with vision problems and cannot zoom in with what I have, and the work of the "Magnifier" somewhat well but could use something better.

  Any ideas?

  Hello

  Please refer to the links and check if it helps.

  How to set accessibility features for people who are blind or who have low vision in Windows XP

  http://support.Microsoft.com/kb/308978

   

  Windows XP accessibility tutorials

  http://www.Microsoft.com/enable/training/windowsxp/default.aspx

  Overview of the magnifying glass

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/magnify_about.mspx?mfr=true

  I hope the information is useful!

• I am also having the same problem with the same updates. I have Windows XP SP3 and it's updates with the problem.

  I am also having the same problem with the same updates. I have Windows XP SP3 and it's updates with the problem.

  Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2572073)
  A security update for .NET Framework 2.0 SP2 and 3.5 SP1 on Windows Server 2003 and Windows XP x 86 (KB2518864)
  Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2633880)

  They all install properly but switches back to windows update to install. It's some kind of loop.

  Hi billy73,

  In addition, if you still have questions, please take a look at the thread similar here with a solution as possible.

  I hope this helps!