Language UltraSlim more Wireless KB & mouse GUI

Similar Questions

• Driver Wireless Laser Mouse (PA3706E-1ET1) problem software on Windows XP

  I have a Toshiba Wireless Laser Mouse PA3706E-1ET1 that gives a serious problem with the MouseDriver.EXE software provided on the CD with the mouse.

  * First release _ * _: when you install the driver on the CD I get an error message saying that they are not certified by Microsoft. The documentation that came with the mouse has an additive brochure that says about it and ignore that the software works without any problem.

  * _The issue_ *: with the mouse driver, I get a mouse icon in the windows taskbar and clicking on it will allow me to set up all the extra buttons running. Everything works very well at this point. The problem occurs when I try to shut down Windows (this is Windows XP) it will fail to finish. It seems to me close a few icons in the status bar, but then it stops. I can click on stop again and it still will not close. If I click with the right button on the mouse icon of toshiba in the windows taskbar and click EXIT in the drop-down menu, then shut down Windows and then stops. It seems that the mouse driver is to avoid a stop down. This is what is displayed in the event viewer:

  Event type: WARNING
  Event source: USER32
  Event category: no
  Event ID: 1073
  Date: 02/07/2009
  Time: 10:53:03
  User: NT AUTHORITY\SYSTEM
  Computer: PC
  Description:
  The attempt to shut down the PC

  For more information, see Help and Support Center in [http://go.microsoft.com/fwlink/events.asp].
  Data:
  0000: 00 00 00 00...

  * _Third issue_ *: it is serious, I have Microsoft Virtual PC. When I launch and run any VPC I get a blue screen of death. The error is DRIVER_IRQL_NOT_LESS_OR_EQUAL and the offending component is SysMouseFilterF3.sys.

  If I uninstall the mouse driver that disappear from all of the above questions. The mouse works but not all buttons. Scrolling the mouse left + right, vertical and the back and buttons before work, but the parchment of horizontal tilt and two additional buttons do not work.

  I can't find any mention to my model mouse on Toshiba or the Internet in general. Is there an updated driver for this mouse or in any way I can solve problems above without losing the functionality of the extra buttons?

  -Andy

  Re: Toshiba Wireless Laser Mouse PA3706E-1ET1 (which is appears as 'Sysgration USB mouse' in hardware)

  Yes, Andy, I have the same problems with this mouse. No driver updated (or even original) with a view to anywhere.

  Called Toshiba - all they could suggest "just use the drivers on the CD" and unable to offer any other suggestions!
  No drivers on PC World UK (seller) or Sysgration site or the other.

  Author of the driver (info email the driver DLL) contacted but no response until now.
  SysMouseFilterF3.sys does not seem to be the culprit because it causes a blue screen of death on the startup of the system.
  In order to get the mouse to work I just uninstalled Sysgration drivers and delete the mouse in the hardware list.

  Windows Xp then tried and it seems to work ok with driver default for Microsoft - but only right + left, scroll, front + rear, Alt + Tab appear to function.

  Colleagues, it takes up to a new driver appears!

• Re: How to uninstall software wireless optical mouse?

  Mr. / Ms.

  I bought a genius wireless optical mouse and I went back because it does not work, the problem, the mouse software remained in my programs folder. So I tried to uninstall the software for the mouse, but I get the message that says "" I should have a special authorization in order to remove the software from the mouse in the folder C: / / ""
  Any solution do you know what type of permission that I should have! to remove this software.
  I think that if I had the CD of the mouse I have uninstalled easily, but I n ' have the CD.
  But still, I don't think that you need a CD to uninstall a software on your computer.

  Any suggestion please.

  Thank you

  Hello

  Should give us a little more information than we can help so that notebook and OS make you have?
  What mouse do you have?

  Normally, you can uninstall a software application if you go into control-online adding Panel & remove programs. Select the software for the mouse then click on uninstall.

  If it doesn t work you need a special program. Therefore, I prefer CCleaner. You can also remove programs with this cold, you can clean the Windows registry and system files. It s very useful and can make your Windows faster.
  Check this box: http://www.ccleaner.com/

  Welcome them

• Wireless magic mouse

  Why my wireless magic Mouse loses connection 80% of the time?

  Hey marthac56.

  I understand that you are experiencing some connection problems with your Magic Mouse Wireless. I have an article for you with a few suggestions that may help you resolve this issue:

  Your mouse or your keyboard intermittently not responding

  Follow these steps if your mouse or your keyboard sometimes stops responding temporarily.

  Click or press a key

  • Click on the mouse or trackpad, or press a key on the keyboard to reconnect the device to the computer. It may take a while for the device to respond.

  Search for interference of signals

  • Wireless networks that operate on 2.4 GHz can cause interference. Move base stations of phone wireless, microwave ovens and other appliances of 2.4 GHz far your Mac if you suspect interference.
  • Keep devices wireless to 10 meters (30 feet) of your Mac.
  • Avoid putting metal objects between your wireless device and your Mac.

  Your mouse or trackpad is not follow as planned

  Wireless mouse Apple Magic Mouse and Magic Mouse 2 can be used on most smooth surfaces; However, if you track problems, try these options:

  • Choose System Preferences from the Apple menu, then choose mouse. Set the tracking slider to adjust the speed of the pointer when you move the mouse.
  • Try to use another surface to see if the tracking improves.
  • Return the mouse and inspect the sensor window. Use compressed air to gently clean the window of the sensor if dust or debris.
  • If several Bluetooth wireless devices are used nearby, try to disable them one at a time to see if the problem improves. Bandwidth intensive devices could affect tracking.

  Learn more about what to do if your trackpad is not followed correctly.

  If your Apple wireless mouse, keyboard or trackpad doesn't work as expected - Apple Support

  https://support.Apple.com/en-us/HT204621

  Be vigilant and thank you for visiting the communities of Apple Support.

• Microsoft Wireless Mobile Mouse 3000 pointer doesn't move.

  My wireless mouse pointer won't move when I move the mouse. Clicking on will work to place the cursor/pointer is but the pointer does not move. Green light on the mouse turns off shortly after start. The battery is new. It happened when I unploug the mouse to move the laptopcomputer and in general he reajusts himself, but no more.

  Hello

  Thanks for posting your query in the Microsoft Community Forums.

  I understand from the description of the problem, that you have problems with Microsoft Wireless Mobile Mouse 3000.

  Help me with little information.

  -What version of windows you are using on the computer?

  I suggest you to consult the help articles and check if it helps.

  Troubleshoot a wireless mouse that does not correctly

  http://support.Microsoft.com/kb/321122

  Troubleshoot the incidents of the response to the mouse or wireless keyboard

  http://support.Microsoft.com/kb/838398

  It will be useful.

  Let us know if you encounter problems under windows in the future. We will be happy to help you.

• MS Wireless Laser Mouse 6000. When I test of arrow to scroll/bounce backwards and forwards

  I have a MS Wireless Laser Mouse 6000. For a while it was fantastic, but now, everytime I try the / arrow scrolling through columns of docs, images or e-mail items moved with the cursor (on the side or on the bottom) begins to bounce back and forward and points of view moving vertically (or left and right uncontrollable.) To increase the frustration, sometimes things work normally for a short period before the fun begins. When I change to a basic mouse (USB) there are no more problems! : O Tony

  Most often when a device does not work, it's because the driver has been corrupted.

  Try reinstalling your.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/

• Dysfunctions of the Microsoft Wireless Mobile Mouse 4000 Nano transceiver

  Microsoft Wireless Mobile Mouse 4000 Nano transceiver malfunction, overheated and burned my hand, how to contact Microsoft and get a new mouse?

  I bought it on a year ago, worked well until the transceiver overheated and did not get recognized more by any pc.

  Hello

  The reasons of the overheating of the transceiver are not known, because it was not isolated incident, please go to the link provided below for more information on how to replace Microsoft software or hardware, order service packs and replace product manuals.

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

  You can also get in touch with Microsoft hardware support for assistance.

  Contact us

  http://www.Microsoft.com/hardware/en-us/support/contact-us

   

• Microsoft wireless mobile mouse 6000 v2 2.4 ghz dongle replacement

  Is the dongle that came with the "microsoft wireless mobile mouse 6000 v2" replaceable?  If so, where would you get? URL?

  Hi Amishangel,

  You can get in contact with the center of replacement of Microsoft and are looking for the same thing.

  For more information, you can consult the following article:

  How to replace Microsoft software or hardware, order service packs and replace product manuals

• Microsoft wireless mobile mouse 4000 rubber wheels problems.

  My wheel cover Microsoft wireless mobile mouse 4000 rubber became sticky and is more tightly bound to the wheel. There were reported incidents of what happens to third parties?

  Hello

  Consult the broken / defective products section from the following link:

  http://www.Microsoft.com/hardware/en-us/support/contact-us

  I hope this helps.

• Wireless Mobile Mouse 4000 overheat

  My Microsoft Wireless Mobile Mouse 4000 is also overheating and I can't use the mouse more. It's too hot to the touch and I get an error message. I used this mouse last six months ago and it was working fine. I have not had to use one until this week. Please notify.

  Hello

  It seems that the mouse has developed a problem.

  Wireless Mobile Mouse 4000 - has a 3 year warranty
  http://www.Microsoft.com/hardware/mouseandkeyboard/ProductDetails.aspx?pid=013&active_tab=systemRequirements

  Microsoft Hardware warranties
  http://www.Microsoft.com/hardware/warranties.mspx

  These mice are delivered with 90 tech support of day of the 1st incident that was about to begin when
  contact Microsoft at the number below. If the mouse is defective, they will replace it.

  Hardware support of MS and warranty claims
  Tech Support 1-800-936-5700 for MS Hardware.

  I hope this helps.

• MS Wireless Laser Mouse 8000 charging light illuminates any

  Recently, I noticed that the witness of charing on my MS Wireless Laser Mouse 8000 is not lit at all when on the charger. Not green, not red, not flashing, not stable. Just nothing.

  So far, it works again, it seems to charge, but I would like to know if there is a problem. I've done the obvious things (for me): clean the contacts taken care to what the charger is plugged at both ends.

  Any suggestions?

  Thank you.

  Ken Isaacson
  

  KJIsaacson,
  As long as the mouse still works normally and is in charge, so it's nothing to worry about.  Probably the LED went wrong but which would not affect the operation, he is only there as an indicator for you do know that the load.  If the unit stops to load then do it repaired / replaced.

  Let us know if you need more assistance.
  Thank you
  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Replacing the old Standard Wireless Optical Mouse... can new mouse- or even model work with old receiver (mouse/keyboard)?

  I have a model 1025 MS Standard Wireless Optical Mouse that has a flashing click function (it often does register any). It is part of a game that uses a keyboard with the same (office-puck-type computer) wireless receiver. I would only replace the mouse with all that is the closest current model (or maybe I can find a refurb or exact same model used, if need be).

  QUESTION: The interchangeable receivers for a given model, or that they can be used with only one unit (mouse) specific?

  I'm guessing that they refer to the receiver, otherwise with a range of 300 ft, chaos would result in an office full these. But maybe also this "overlay" is insider manually first handshake which is known later. If so, then there's a chance? My mouse: model 1025 p/n X 800127-113

  The BIGGEST QUESTION, then maybe: a current 1000 series mouse will work with the receiver old (my model is more made, apparently)? Thank you!

  It depends on the frequency that work on the mouse and the base.  I tried to find info on your old mouse and there is nothing available.  I think would be best to simply select a new wireless mouse.  It will come with a wireless receiver dongle that you can plug into a USB port.  I think you'd have a very hard time finding a new mouse that will use the same exact frequency as the old configuration.  If you're short USB ports to plug an extra dongle you can always buy a USB hub for next to no money. Locutys of Borg

  Resistance is futile

  If you don't succeed the first time skydiving probably isn't for you!

• Wireless 4000 mouse causes screens will be jerky!

  I replaced my old mouse that stop working with a mobile mouse 4000 M/S wireless and whenever I'm in any open screen, the screen jump from top down.

  Hello

  Have you installed the latest version of IntelliPoint for the new mouse?

  Microsoft Hardware - downloads
  http://www.Microsoft.com/hardware/en-us/downloads

  There might be a problem with the mouse - it solve problems you can and if necessary contact
  supported.

  Wireless Mobile Mouse 4000 - has a 3 year warranty
  http://www.Microsoft.com/hardware/mouseandkeyboard/ProductDetails.aspx?pid=013&active_tab=systemRequirements

  Microsoft Hardware warranties
  http://www.Microsoft.com/hardware/warranties.mspx

  These mice are delivered with 90 tech support of day of the 1st incident that was about to begin when
  contact Microsoft at the number below.

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ========================

  Use the startup clean and other methods to try to determine the cause of and eliminate
  the questions. (This assumes that something is intefering with the mouse.

  ---------------------------------------------------------------

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems). Norton/Symantec and other of these type programs are known to cause problems of
  with the mouse.

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Microsoft Natural Wireless Laser Mouse 7000

  Hello

  I have a 7000 Microsoft Natural wireless laser mouse that I bought as part of a package with a keyboard. The problem I have is the mouse didn't cause the Web page, I've been to zoom in 1000% without me clicking on it, I would like to get back to 100% but he would do it again, it would start then zoom in with all the way to 25%. Also, I can't click on the red x to close a window. On my desktop mouse has already made something as if I dragged something to move. It also uses the left button as if it were a right-click opening things while all the other buttons do nothing. I checked al the configuration and the buttons are assigned correctly. I'm really confused and it is difficult to explain (its like the mouse that has a mind of its own), but I tried everything from changing batteries, uninstalled the software and put it back in place and even move the receiver to another USB port wireless. I have no more ideas about what I can do to make my mouse works normally again. Please could you contact me and advise on what I can do then, as it is very frustrating and practically impossible to use the computer with the mouse behaves as it is.

  Thank you

  Hello

  Test the product on another computer:

  To help you determine if the problem is due to your computer or device, try the mouse on another computer.

  See also: http://support.microsoft.com/kb/838398/en-us

• My Wireless Mobile Mouse 3500 driver does not allow me to control the scrolling of the wheel

  My Wireless Mobile Mouse 3500 driver does not allow me to control the scrolling of the wheel. When I scroll it will only pages and no option available for the adjuments to go through all the 3 lines or more. I thought that I had downloaded the wrong driver but the mouse did not bring a CD or another. Returned to download the specific driver and still can't get in there.

  Hello

  1 have you made changes to your computer recently?

  If the mouse works well, if a setting should be changed the mouse in the intellipoint software, you can contact the manufacturer of the device for more assistance.

  http://www.Microsoft.com/hardware/en-us/support

  For more information you can check the link below.

  Troubleshoot the incidents of the response to the mouse or wireless keyboard

  http://support.Microsoft.com/kb/838398

  Concerning