Laptop HP 15-g010nr: cannot adjust the brightness of the screen

Similar Questions

• Cannot adjust the screen resolution

  I tried to reset the setting on my resolution for my windows monitor XP WITH SP1, boots upwards in mode 4 by default bits. I'm under System 32 and before I tried to download updates for SP2, WAS in MEASURE of HAVING 16 BIT COLOR, cannot adjust the screen resolution, it is locked on 640 x 820. How can I fix it?

  Hello

  What Dell? Dimension? OptiPlex? Inspiron? Others? In the meantime, I'm looking to see if there is only a single 2300.

  I repeat...

  You just do a new installation of a Windows CD?

  If you have, you will need to install all the drivers concerned material, including graphics drivers.

  Click on start, run, then type devmgmt.msc and press ENTER. In Device Manager there devices not identified or marked as having a problem (marked with!)?

  Tricky

• Cannot adjust the brightness after display driver update on Satellite L855-118

  Hello.

  I just bought a SATELLITE L855-118, with ATI graphics card today, it was between this and another of them, but I know that you have problems updating graphics drivers on a portable Sony.

  I did a restore point.

  So I uninstalled the ATI catalyst graphics card and then did a sweeper driver and rebooted and then installed catalyst 12.6, installed fine, but my screen went to the maximum brightness and I can't adjust, BRIGHTNESS osd is displayed but the brightness of the screen does not change.

  So I used my restore point.

  This time I crushed the catalyst 8.9 with 12.6 stock, still cannot adjust the brightness.

  Someone knows how to solve this problem.

  My spec full in the link below.

  Satellite L855-118 - product specifications - Toshiba

  Thank you

  John.

  You mean that you can not use the Fn or Fn + F6, F7 button combination?
  Do other combination works properly?

  Also check this doc:
  http://APS2.toshiba-tro.de/KB0/TSB11033A0000R01.htm

  There is a brightness.zip that installs the additional registry key

• Pavilion 15-r004ne: cannot adjust the brightness of the display

  I m using the Pavilion 15-r004ne on a windows 64-bit OS 8.1 and I cannot adjust the brightness of my screen. I tried to adjust by shortcut keys F2 and F3, tried adjusting via the mobility Center, tried through Control Panel and so on, but no response until now. It shows the little pop-up when I press the keys. But nothing has changed, the brightness of the display remains the same. in order to get solution soon.

  Thank you for your support. It didn't work either. I solved the problem of roll back the driver and update again.

• Cannot adjust the brightness in Windows 7

  I have recentlly installed win 7 rc on my G530 and I cannot adjust the brightness and more. I have download the hotkey driver features that now allows me to adjust the volume and everything but the screen brightness... y at - it a specific driver, I need to download for this? Thank you.

  Nevermind I solved this isue. I have download Lenovo Hotkey features and executed the file as administrator with Vista compatibility mode:

  http://www-307.IBM.com/PC/support/site.WSS/MIGR-68000.html

  problem solved. I also updated the bios.

• Re: Satellite L855 and Windows 8 - can't adjust the screen brightness

  Hello world!

  I installed Windows 8 on my L855 Satellite and it is running pretty well except that I can not adjust the screen brightness. I have updated all drivers for win 8, but it does not solve the problem.

  Hope someone can help me! Thank you!!

  Can you do this using the settings in some diet plan?

• Trying to repair XP Home CD, but cannot access the screen where you choose to repair or install fresh.

  Trying to repair XP Home CD, but cannot access the screen where you choose to repair or install fresh.

  I get the first screen where you have the choice to configure windows or press 'r' for recovery console.

  After I press enter for the installer, do not me the usual on-screen next where it is said that if the following XP installation is damaged, you can repair it.  Instead, it leads me to a screen where it shows my partitions and asked that one I want to install windows on.  If I choose "C:" he then told me that there is already a system opperating on the partition...

  Hello

  Follow the steps of "Error Message: Setup cannot set the required Windows XP Configuration Information.
  ' http://support.microsoft.com/kb/316425 '.

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Cannot run the screen saver because it requires a newer video card or one that is compataible with Direct3D.

  Hello

  I recently rebooted my computer; (Packard Bell) and now cannot run games or screen savers because it does not start. I think my problem has something to do with a Direct3D card? When I run screensavers, I get this message:

  Cannot run the screen saver because it requires a newer video card or one that is compataible with Direct3D.

  I have the impression that sound when I run the 3D games, such as minecraft or GMOD.

  I run on Windows Vista Edition Home Premium and does not do anything but re - install my computer because it wouldn't start.

  It is not as if the graphics card is not there, so I'm really confused!

  Please help me, like playing games is my favorite thing. ;)

  Charlie

  I also ran minecraft to double check and I got this error code:

  Bad video card drivers!

  -----------------------

  Minecraft could not start because it did not find an accelerated OpenGL mode.

  Generally, this can be corrected by updating the video card drivers.

  -BEGIN 7fe0271 error REPORT-

  Generated 10/10/12 21:04

  -Minecraft Version: 1.3.2

  -Operating system: Windows Vista (x 86) version 6.0

  -Java Version: 1.7.0_07, Oracle Corporation

  -Version Java VM: Java hotspot Client VM (mixed mode), Oracle Corporation

  -Memory: 422585352 bytes (403 MB) / 518979584 bytes (494 MB) up to 1037959168 bytes (989 MB)

  -JVM Flags: 2 total; Xms512m-Xmx1024m

  -LWJGL: 2.4.2

  -OpenGL: ~ ERROR ~ NullPointerException: null

  -Is Modded: Probably not

  -Type: customer

  -Texture Pack: ~ ERROR ~ NullPointerException: null

  -Position profile: N/A (disabled) [can't get system (java.lang.NullPointerException) properties]

  org.lwjgl.LWJGLException: Pixel format not accelerated

  at org.lwjgl.opengl.WindowsPeerInfo.nChoosePixelFormat (Native Method)

  at org.lwjgl.opengl.WindowsPeerInfo.choosePixelFormat(WindowsPeerInfo.java:52)

  at org.lwjgl.opengl.WindowsDisplay.createWindow(WindowsDisplay.java:185)

  at org.lwjgl.opengl.Display.createWindow(Display.java:311)

  at org.lwjgl.opengl.Display.create(Display.java:856)

  at org.lwjgl.opengl.Display.create(Display.java:784)

  at org.lwjgl.opengl.Display.create(Display.java:765)

  at net.minecraft.client.Minecraft.a(SourceFile:233)

  at net.minecraft.client.Minecraft.run(SourceFile:516)

  at java.lang.Thread.run (unknown Source)

  -REPORT of ERROR END bb61788b-

  Hello

  After you reinstall the operating system, you should also go to the website of your computer manufacturer > drivers download section > put your computer model number > search for your operating system and drivers (graphics, audio, etc.) > download and install.

  See you soon.

• My laptop does not do anything on the screen

  My laptop does not appear anything just blank black screen when I start my system

  Hello

  If nothing at all, not even a motherboard brand / model or Logo of laptop manufacturer is coming up on the screen when you turn on the power to the laptop, it seems to be a hardware problem.

  If under warranty, contact the manufacturer of your laptop.

  If it is not under warranty, contact a repair shop, local.

  See you soon.

• Laptop HP Pavillion: cannot adjust the brightness

  I can't adjust the brightness on my laptop.
  
  I tried;

  01 method.

  Open Control Panel, click hardware and sound, and then in the Section of Power Options, click

  "Change the energy saving settings. There is a slider to adjust the brightness at the bottom of the window.

  Method 02.

  Open Windows Control Panel, open the Windows Mobility Center and the brightness here

  Method 03.

  On most laptops, pressing F3 and F2 key often will increase and decrease the brightness of the screen

  None of which work.

  Please, try to install the graphics driver (which is applicable) and check if it works, here is the info pilot.

  NVIDIA Graphics Driver: http://ftp.hp.com/pub/softpaq/sp72501-73000/sp72872.exe

  Graphics of AMD driver high definition (HD): http://ftp.hp.com/pub/softpaq/sp71501-72000/sp71980.exe

  or

  Intel graphics driver high definition (HD): http://ftp.hp.com/pub/softpaq/sp74501-75000/sp74697.exe

  You can also try with HP Support Assistant: http://ftp.hp.com/pub/softpaq/sp74501-75000/sp74656.exe

  Concerning
  Smail
  Hewlett-Packard

  Click on "Bravo Star" icon on the left side so resolute.

  I am an employee of HP, but the comments in this forum is of myself and is not HP

• 100 s-11IBY computer laptop (ideapad) - cannot adjust the brightness of the screen - windows 10

  Hello my f11 and f12 keys is no longer adjust my brightness. The gauge up and down, but does not change the brightness. I tried to update the graphics card in Device Manager, but he says that it is up-to-date. Same thing with 'Generic PNP Monitor' said that it is up-to-date. I wiped the computer clean and 'reset' and reinstalled windows and it still does not allow me to adjust the brightness of the screen

  I'm not incredibly intuitive with computers, but I followed the instructions as much as I could find during my research online with nothing doesn't.

  Initially, the problem occurred when I used out of ignorance a program to install the drivers it says have been exceeded. After that, my audio stop working and my keyboard stop working entirely. After resetting the computer and windows resettled, the only question that remains is the brightness of the screen not being able to be adjusted.

  This drives me crazy, can anyone help me? I would be very happy! and please let me know if you need more information regarding my laptop. Thank you!!

  I thought about it. My drivers intel had to be installed since I reinstalled windows. I used the utility of intel and updated driver to update the graphics card update

• Cannot adjust the brightness of the laptop

  Hello world!

  I have a laptop HP ProBook 4445 s, and this afternoon I noticed that my screen is small, so I tried to adjust the brightness, but it doesn't work. Last week, I update my OS Windows 8.1. I do not download drivers from other sites.

  What should do?

  Thank you!

  Hello

  Try to use Recovery Manager to reinstall your original graphics driver (Intel, Nvidia, AMD etc.) - the procedure to use the Recovery Manager to reinstall the drivers and software is detailed in the document in question on the link below.

  Recovery Manager - Windows 8.

  Recovery Manager - Windows 7

  Recovery Manager - Windows Vista

  After reinstalling, restart the laptop.

  Kind regards

  DP - K

• Cannot adjust the brightness of the laptop monitor

  I'm not sure when this problem started, but I'm guessing it's when I've updated my graphics driver (Nvidia) or software of the chipset (Intel).

  After a while, I noticed that my brightness keyboard shortcuts were not working, but other hotkeys (touchpad, volume, sleep, wi - fi, bluetooth, etc.) were still working.

  Since I use my laptop for most on my desk with the max brightness settings, I ignored it for a while.

  When I happened to use up the outside of the battery, the monitor went automatically minimum brightness settings.

  I tried to find the brightness slider in the control panel or the mobility Center, but they have been missing.

  The options for the Adaptive brightness disappeared as well.

  Now I don't see a way to adjust the brightness of my.

  I tried a variety of suggestions available on the web, including:

  create a new user account,

  validation of account information,

  Remove and reinstall the driver for the monitor,

  search for 'brilliance' in the start menu,

  re-installation of software hotkey,

  rolling back the graphics drivers and chipset (from those provided by the manufacturer).

  I spoke with a Microsoft support for topic a couple of hours, still no luck (he was very nice anyway).

  If anyone is suggesting the control panel Windows or Nvidia color grading, I don't mean for those, since I need to adjust the brightness of the backlight of the screen, not software-ish of calibration of the colours on the screen.

  I use Windows 7 Ultimate on CLEVO M860TU with monitor Chi Mei N154Z1-L02

  I am looking for a way to restore the brightness sliders, or at least to adjust the brightness manually.

  When I had to happen, I was able to restore by doing this:

  (1) open Device Manager

  (2) right click and uninstall the monitor (not the graphics driver, but the monitor specifically)

  3) click on the "Scan for new hardware" button on the toolbar above

  (4) try to use the brightness slider functions once again (either in Center of energy or mobility settings).

  Has worked for me, I would like to know if it helps you too.

• I cannot adjust the brightness of my screen on my dell laptop 1510

  I installed windows 7 me and now when I try to adjust the brightness with the fn key or thrown windows Mobility Center, or power options it does not work, I tried many different things and it still does not work

  I just installed the driver nividia nb8m-gs for windows vista from the website of dell http://support.dell.com/support/downloads/driverslist.aspx?c=us&cs=08W&l=en&s=bsdv&ServiceTag=91QKVF1&SystemID=VOS_N_1510&os=WLH&osl=en&catid=&impid= and so far it works like a champ thanks to God, I can even adjust brightness threw the fn key!

• 15 - r254nu:. Cannot adjust the brightness on Windows 8.1

  So I tried different ways to resolve this issue, but again the light cannot be turned on/off. Help, please!

  

  Hello:

  There are two Intel driver links to the choices on your laptop support page.

  I explored the folder of the driver of this driver file to support your laptop and driver page, and it is suitable to use driver.

  This package provides the driver that allows graphics Intel high definition (HD) in the notebook models that are running an operating system supported. If the video output high-definition multimedia interface (HDMI) is supported, this package also installs the HDMI Audio Driver.

  File name: sp69589.exe

  The hardware ID for the Intel graphics card in your laptop must be one of these...

  ;=====================================================================
  ;    Windows 8.1 install
  ;=====================================================================
  [IntelGfx.NTamd64.6.3]

  % iVLVGMT0% = iVLV2M_w81, PCI VEN_8086 & DEV_0F31 & SUBSYS_220F103C
  % iVLVGMT0% = iVLV2M_w81, PCI VEN_8086 & DEV_0F31 & SUBSYS_2213103C
  % iVLVGMT0% = iVLV2M_w81, PCI VEN_8086 & DEV_0F31 & SUBSYS_2210103C
  % iVLVGMT0% = iVLV2M_w81, PCI VEN_8086 & DEV_0F31 & SUBSYS_2214103C

  You should see a device from Intel HD graphics instead of the graphics card base of Microsoft, and unless you can get the graphics driver to install you will not be able to adjust the brightness of the screen.

  Is the above driver do not install the Intel graphics card automatically, try to install the driver manually by navigating to the folder of the driver that is created after running the above file.

  Confirm that the hardware for the Intel graphics card ID matches one of the above since the driver installation information file that I posted.

  To find the ID of the hardware, Device Manager, click the graphics card Microsoft Basic.

  Then click on the Details tab in the upper part of the window Microsoft Basic graphics card.

  Now you should see a drop-down list of property and it is set by default to the Description of the unit.

  On this list and select the 3rd point (Hardware ID).

  Confirm that the hardware ID, you see there is one of those listed that I posted.