laptop ranging from 120 GB to 24 GB after formatting drive c
Hello.
My hp dv 2000 series, with operating system Vista notebook, went from 120 GB to 24 GB after that I formatted the c drive.
I use the cd of restoration of hp support staff, let it run by itself. When you are finished, the pc is running out with 24 GB partition.
So, I Don t even no place for updates or anything else.
How can I reinstall the bigger hard drive?
Thank you.
Hello
Please visit the following link to resolve the Incorrect Hard Drive Partition size problem appears in Vista
http://support.HP.com/us-en/document/c00870036
Please copy and paste the link into the new browser...
Thanks and greetings
miranstar
Tags: Notebooks
Similar Questions
-
How can I stop technotronic tv ranging from vga to out of reach after windows has loaded?
How can I stop technotronic tv ranging from vga to out of reach after windows has loaded?
VGA Out of range usually means that the display resolution is not properly set for television "limited." Demarrer start in safe mode, and then set the resolution to a lower setting.
-
I have Toshiba laptop running Windows XP Professional edition. I have a vertical line on screen ranging from very high to very low. It's about an inch from the right side of the screen. How can I solve this problem?
Sorry to hear that, but the screen is bad and must be replaced!
Good luck! Please rate me upward if you find my post helpful. Thank you!
-
Measurement of voltage USB 6008 ranging from 1mV
Hi, I'm doing a supply at an angle for an amplifier using the USB-6008. The ranges I look are - 0.5 to 0.5 V and 0.5 to 2.5 V. To generate negative tensions, I use the + 2, 5V for a reading of differential voltage output as a 'ground '. Voltage measures have a delay that varies with the voltage, given this by drawing these variations and set the output to data acquisition there is still a 'noise' of +/-1 mv so that it is clear from this parcel of tension against the sample number:
It seems that at some point the values are being rounded up to the nearest millivolt. I need to get to a resolution of 0.5 mV for my device, it will be possible with the USB-6008?
The AO USB-600 x has a range from 0 to + 5 V and the 12-bit resolution. 5/4096 = 1.22 mV. Absolute precision is 7 mV typical and 36.4 mV maximum full scale. The noise of the AO is not specified.
If you measure the results with THE USB-6008, you have at least 0.5 mV, similar resolution system noise and absolute accuracy of 2.5 mV or more.
It's probably as good as you will get with the box USB-6008.
Lynn
-
LR 5, no CC, with Nikon D800, trying to tie with MacBook Pro laptop; message from non-recognition of camera. Tried to download the latest updates of LR. It runs on desktop PC but not MacBook .your help please.
What version of OS are you using? If you run El Capitan, he won't work except in the latest LR6 and CC. Libraries attach Nikon used until 2015.3 or 6.3 LR LR 5 and LR CC are incompatible with El capitan. Nikon has recently updated libraries and those that are now used in the latest versions of LR.
-
Satellite L500-120 - where can I get the display driver?
Hey guys,.
I need help to find the right driver form. My graphics card is: ATI Mobility Radeon HD 4650 and I have Satellite L500 120 PSLJ3E
I need to have the driver for my ATI Mobility Radeon HD 4650, but I can't find the right...
Can someone help me maybe?Is that the right side of the driver? When is it driver wich Yes?
[URL]
http://de.computers.Toshiba-Europe.com/innovation/vista_drivers.jsp?macId=&LNG=2&mode=allMachines&us erOS = & action = & SelCategorie = 2 & selFamily = 2 & selSeries = 178 & selProduct = 857 & selShortMod = 890 & selOS = 26 & selTyp e = all & country = 12 & language = 17 & search =
[URL]hope someone could help me quickly...
Crowz
Hello!
You can get all the drivers on the Toshiba website for your laptop. I checked this and the website to show a new driver for your graphics card.
Check this box:
http://EU.computers.Toshiba-Europe.com > support & downloads > download driversIf you are looking for by Satellite L500 and PSLJ3E, you will find one that suits. ;)
-
Laptop Sony vaio computer camera works does not after having tried most of the things!
have a computer laptop vaio from Sony and the camera does not work. I did most of the things apart to take apart!
It has the standard driver that I uninstalled and reinstalled again.
I don't have a arcsoft webcam program that many people say is contributing to this problem.
Operating system is Windows 7.
You can also try uninstalling and reinstalling the driver for the webcam in compatibility mode, if you have not already done.
Here are the steps:
- Download the latest drivers from the site of VIOS of technical support.
- Press the Windows key + R, then on "devmgmt.msc".
- Go to webcam driver, then right-click on it.
- Click Properties and click the Uninstall tab.
- Click OK.
- Re install the latest driver in compatibility mode.
- Right-click on the downloaded driver.
- Click Properties , and then select the compatibility tab.
- Click the check box next to "run this program in compatibility mode for: '.
- Choose the option of Windows 7 on the menu drop-down.
- Click "Run this program as an administrator".
- Click apply and then click OK.
If it persists, you may need to contact your computer manufacturer for help with your concern.
Thank you.
-
How can I keep windows genuine in my laptop after formatting hard drive?
Hello
I have a dell laptop l502 with a premium windows home instlled in hard drive 7. now I need to format the hard drive, but how can I keep my windows 7? is it possible to save or I loss my windows genuine?New computers coming often pre-installed with Windows 7 have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.
This is how the recovery partition is available for the most popular brands
For Dell, press CTRL + F11 directly after switching on the device
This will allow that you reinstall Windows 7 while maintaining a true.
Make sure that you back up your data before reinstalling:
http://notebooks.com/2010/12/27/how-to-backup-to-an-external-hard-drive/
http://notebooks.com/2011/02/25/how-to-restore-a-backup-from-an-external-hard-drive-in-Windows-7/ -
Hello
I desperately need HELP! I formatted my laptop Dell Inspiron N5110 and reinstall a copy of windows 7 after noticing several virus on my pc. But I doesn't not delete or format the Partition recovery. The recovery partition is intact. I now have to recover my pc to the factory of origin of windows settings , but I don't know if it's possible and how. I didn't know I could just use the Dell Datasafe from the beginning before formatting my pc (stupid I am). I handed a letter to the recovery partition (f) and know I can see all the files included in it. After searching for a while, some people suggesting to run the cmd following under 'Tools' dir (ED I can't find):
imagex /apply f:\dell\image\factory.wim 1 c:\
Can someone help me please? I really need help with that! Can someone give me instructions what to do?
Thank you
Chris.
Hello
Don't need you to worry, by making use of the formatted partition recovery software you can easily recover files after formatting the hard disk partition. Few days back, I spent the same similar problem where in lost some important files due to the installation of the OS. Then I tried this recovery software which really helped me to recover files after the installation of the operating system. So, you can download this software by following the below mentioned links.
Page link: www.recoverformattedpartition.com/file-recovery-after-formatting-during-os-re-installation.html
Download link: www.recoverformattedpartition.com/.../recoverformattedpartition-windows.exe
Good luck
Seley
-
My laptop still give me a version track even after the connection
I downloaded CC on 2 Mac 1 desktop and 1 laptop. My laptop still give me a version track even after the connection
If it please try to disconnect from the creative cloud and reconnect. Try to follow:
-
Delete photos from my camera do not roll after the update to 9.3.1 IOS iPhone 4s, also the photo has not saved when taken by camera
Mhefzi86 wrote:
Delete photos from my camera do not roll after the update to 9.3.1 IOS iPhone 4s, also the photo has not saved when taken by camera
OK, thanks for sharing.
Maybe you can provide clarification comments on what happens when you try and what troubleshooting steps you did.
-
Hello
I bought the HP ENVY 15-as032nr with only 512 GB SSD laptop. I want to add additional 1 to hard drive. Can it be done?
Yes, you have the 512 m2 NVME PCI - e (lucky) drive gig and that goes into a slot and then there is also a slot open for a standard hard disk 2.5 thumbs or SATA SSD. See pages 30-33 of the manual here:
It is likely that your laptop does not contain the HDD mounting kit and cable as shown on page 30 and 31 and this note is in the Manual:
The disk spare parts kit hard does not include the rubber hard drive support or cable hard drive. The hard disk rubber support is available using the spare part number 857797-001. The hard drive cable is available by using the spare part number 857806-001
An extra $ 66 for the housing and the cable seems a bit strong, but I couldn't find their sale anywhere other than HP Store.
This isn't a simple upgrade; If you need assistance.
If it's 'the Answer' please click on 'Accept as Solution' to help others find it.
-
I accidently deleted pictures from the camera chip while it was in drive d:, but before that I copied them to the hard drive. Is there a way to recover?
Hello
What version of Windows are you using?
If it is deleted from the memory card, it can not be recovered. However, there are some third-party applications or the tool that will help you recover photos. If you have saved the pictures on the hard drive and deleted, so you can check in the trash.
See also:
Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.
-
How can I remove old updates from windows to prevent their fill my hard drive?
How can I remove old updates from windows to prevent their fill my hard drive?
You don't want to. Otherwise, why would have installed their in the first place? They are updated for security. Thema alone.
-
How can I copy files from my top of counter to my flash drive
I do not remember how can I copy files from my top of counter to my flash drive. can someone remind me of the process. thanx
Plug it in, select the file/s and then to the right of the mouse / send to
Maybe you are looking for
-
not a function valid file Toolbox labwindows7.1
Hello I have a problem on labwindows 7.1. When I run the labwindows 7.1 software, I get this failure: not a file function group invalid c:/... Toolbox.h How can I fix it please? Thank you!! Adeline
-
help solve the problem: error code 646 when trying to install updates
I get an error code every time I try to install 3 updates inportant code is 646
-
MICRÓFONO BUILT-IN TENGO Y NO WORKS. THAT HAGO?
I have integrated the microphone on my sony vaio VGN-TZ35, but it does not work,
-
STOP BAR TREND FROM THE BEGINNING UP TO
How to stop the boot at startup language bar?
-
Computer runs slowly and fraud calls
Original title: computer running slow. Clean. Hello My problem now is my slow computer at startup upward and the frezzing up from time to time. I received a call in June a company in India that my computer had some questions and what not and they had