laptop stuck at the break to configure windows features

Similar Questions

• Stuck at the screen 'failure of Windows update Setup.

  I have reset my laptop Windows 8 and downloaded the updates required for Windows 8.1. Then I had to reboot my computer and configure updates. Now it is stuck at the screen 'failure of Windows update Setup. He has already restarted once and is back on the same screen. It is an Asus laptop and from what Ive read, this is not exclusive to all laptops Asus. I do not have any disk installation or any way to activate Safe Mode as I have tried (in fact something that requires search or any key entry does not work). I hope you guys can find a soultion, thank you

  EDIT: I think that now it's in a forever continuous reboot, preparation configure updates, failed comfiguring cycle of windows updates.

  Hello

  What is the full error message? An error code is displayed with her?

  Why did you reset the computer? You had problems?

  This problem could be caused due to some incorrect settings or due to a compatibility issue. I suggest you try these steps in the following article and check if the problem persists.

  http://support.Microsoft.com/kb/949358/en-us

  Keep us updated on the results.

• My computer is stuck in the loop "Update Configuration". Boots only in safe mode.

  My computer is stuck in the loop "Update Configuration". Boots only in safe mode. I tried to do a system restore, but an error message appears that says:

  To perform an offline system restore, you must specify which Windows installation you want to restore. For example, if the installation is in "C:\Windows:" should be restored, enter the following command: rstrui.exe/OFFLINE:C\Windows

  I typed in the "run" command, and it didn't work either. VIsta came installed on the computer, so I don't have a disc to insert and reboot with. Help, please!

  Thanks, Ben

  OK, I found how to fix this problem.

  Go to this site download and buy the repair for Vista disc. Burn it to a disc.
  This link will guide you in burning instructions
  http://NeoSmart.NET/wiki/display/G/Burning+ISO+images+with+ImgBurn
  Start your computer with the disk and follow the instructions
  http://NeoSmart.NET/wiki/display/G/Burning+ISO+images+with+ImgBurn

• Laptop stuck on the screen to "prepare the AutoFix.

  My laptop HP a few months came pre-installed with windows 8. When I tried to start it this morning it came with the screen to "Prepare the automatic repair" and is pasted on it. It is not off or change to a different screen as "scan your computer. I'm sure that it does not start in safe mode by pressing f8 or shift + f8, Ive tried several times. I don't know what to do because it's just stuck on the same screen "prepare auto repair.

  This is not a good thing. The long test. Post the results here.

  The result of the test is indicative of a hard disk failure requiring the replacement of the hard disk.

  Contact HP for a replacement under warranty hard drive. You will need the failure status code providing for the drive test hard when you contact HP.

  It's time to find your set of recovery disks. You will need to install the operating system and the software that came with your laptop.

  Best regards
  ERICO

• Stuck on the profile screen after Windows update

  After that a windows update last night, my computer is stuck on the profile screen and I can not connect.  By clicking on the icons for different accounts does not bring to the top of the login screen where I can enter a password. The screen just flashes and the wheel spins for a while and then comes back to the profile screen. I tried to boot into the different security modes but same thing happens and I can not connect. I also tried to fix the computer and restart at the last known good configuration under boot options with the same results. Short to reset the default settings that will erase all my data, (which may or may not work) is there another fix?  It seems that windows is starting up, but just the login screen appear so I can enter my password.  I have windows 7 Home premium version.

  Hello

  Please provide detailed information about your question. I appreciate the step by step troubleshooting, and pain that you have taken to resolve your problem.

  If the Panel username and password is not displayed during logon and the problem persists even in safe mode, then the question could be if there is a corrupted file system or some third party conflicts.

  I suggest that you want to run auto repair with installation media and see if it helps you repair system files. For the execution of the task, I suggest you to try the steps below and see if it helps.

  Method 1

  When you use the recovery environment (Windows RE) to troubleshoot startup issues, first try the Startup Repair option in the System Recovery Options dialog box. If this does not resolve the problem, or if you have additional problems manually, use the Bootrec.exe tool.

  Because you cannot start the computer, you may need to create a bootable Windows installation media, and then do an auto repair, and if this does not help then you try to restore your computer to the previous date.

  Note: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  If you are using Windows 7 and you have the product key and then the link provided below might help you to download and create installation media if you do not.

  Download Windows 7 Disk Images (ISO files)

  Method 2

  If the problem persists, try to rebuild the BCD by using the Bootrec.exe tool. To run the Bootrec.exe tool, you must start Windows recovery environment (Windows RE) . To do this, follow these steps:

  1. Place the Windows 7 installation disc in the disc drive, and then start the computer.
  2. Press a key when you are prompted. Select a language, a time, a currency, a keyboard or an input method, and then click Next.
  3. Click repair your computer.
  4. Click the operating system you want to repair, and then click Next.
  5. In the System Recovery Options dialog box, click command prompt.
  6. Type Bootrec.exe, and then press ENTER.

  See the following link for more information:

  How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows

  http://support.Microsoft.com/kb/927392

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Kind regards

• Stuck to the "Mail Upgrade" status window

  

  Hello

  After upgrading to Mac OS Sierra, when I tried to open Mail.app, it shows me the upgrade message window and that's it. Nothing happens here. I've had this window for almost a day now; all buttons-'continue', 'Quit' is also grayed out. I tried to leave mail and stimulus but no difference. Also have restarted the MBP as well.

  Hope someone can get an idea.

  Thanks in advance

  Everything on this forum: suggestions about Mail.app?

  Even to this day, when I try to open, it is still stuck at the upgrade window.

• I have HP DV6-1256tx, I want driver for my laptop compatible with the next operating system Windows 8...

  Hello. I have HP DV6-1256tx, I want drivers for my laptop compatible with the next Windows 8 operating system. How to download, can somebody help me please...

  Give me the link or something where I can download the drivers...
  
  Thank you

  Edriss Dave

  HP does not currently have drivers for Windows 8. You probably won't need them. Windows 8 is not coming. It's here!

  Just do the installation on a spare hard drive and bring the original HARD drive to a safe place.

  . Windows 8 has drivers built in for most laptops and desktop computers. I did have to look for a driver in two facilities. One was an HP mini and the other was a Toshiba laptop.

• HP pavilion 17 Laptop: stuck at the loading screen

  Hello!
  
  So I did have problems with startup forever, but since yesterday my laptop often stuck after the HP logo appeared and the loading circle turned for a few seconds. While it gets stuck, it begins to make more noise and gets hotter than she usually during boot. I did a check of the system in the BIOS bit everything seems fine. Someone at - it knowa the problem or solution?
  
  Thanks in advance,
  
  Giovanni

  I'll do it every time I have to restart the laptop. A couple of times now, my laptop goes down, and whenever it starts again ot said something about the low battery beong. So maybe theres problems with my battery. I know this isn't my charger that I won't get this problem when my battery ' out. Thank you two for responding and so fast too.

• Thin Quad of HP envy 15t: order of laptop stuck in the treatment

  I ordered a Hp Envy 15t slim portable quad. I suppose that its classified as "custom", but I just ordered it with stock options. in any case, I was the status of the command for the past few days and it is stuck on the treatment. I looked around and it seems as if many other people have this problem. Someone has an answer please?

  Hi @Harold_Flower,

  Welcome to the HP forum!

  This is a wonderful place for advice and information!

  I understand you ordered a mobile stock quad slim HP Hp Envy 15 t of HP.com, after a few days when you check the status it shows always treatment.

  Clarification or an update on your order, please contact HP sales.  Have your order number ready for them.

  • 1-800-HP-direct (800-473-4732).

  To say thank you for answering please click the icon below thumbs up .

  If this gave a solution for you, please choose the solution provided to help other posters.

  I hope this has helped!

• Laptop stuck in the Windows Resume loader

  I have toshiba satellite laptop and my keyboard stops working. While I started the computer I accidentally unplugged the computer will be of that load. Now my computer is stuck in "Windows resume loader" and I have no way to push enter to skip this screen. I can't push f8 to enter safe mode either. Help, please!

  I ordered a new keyboard, but it does not work either.

  Hello

  I suggest to boot from Windows Vista DVD and run the Startup Repair tool and check.

  Startup Repair: corrects some problems, such as missing or damaged system files that may prevent Windows from starting correctly. When you run the Startup Repair, it scans your computer for the problem and then tries to fix it so that your computer can start correctly.

  Startup Repair: http://windows.microsoft.com/en-US/windows-vista/Startup-Repair-frequently-asked-questions

  What to do if Windows does not start correctly: http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly

  Diana

  Microsoft Answers Support Engineer

• laptop stuck on the spinning circle during the upgrade to windows 8.1

  Hello. I have a HP pavilion g6 and today I tried to update windows 8 to 8.1, and he spent the screen where it says put in place 1%... 2 %... Etc... Thereafter it restarted when he hit 100% and now its deadlock on the rotation circle thing. The only thing on my screen is the HP logo and the circle of rotation. His lasts four hours and I decided to just hold the power and restart. When it restarted, it went backward the same screen with the hp logo and the circle of rotation and I left it for a few hours ANDS nothings happening. I took out the battery and held down the button of power and then put the battery back in the hope that he will return to normal... but in vain her back on the same screen. Help me please

  EDIT: I can't do anything right now on my laptop. It is stuck on that screen and it's like my laptop was 'bricked' or something. All I wanted was windows 8.1 :(

  Hello

  You must disconnect external devices such as an external hard drive, printers or the webcam with the exception of your monitor, mouse and keyboard.

  Feel free to get back to us if you need further assistance.

  Thank you.

• Laptop stuck in the loop of starting

  I have a laptop that is trying to set up an update but it must connect to the internet, but as I reach the Office before I can connect to the internet-

  How to stop the system from automatically trying to do the configuration when the system tries to start?

  Hello

  You can use the solutions in this ko - 4 methods and I have listed some help for them below

  The update is not installed successfully, you receive a message, and the computer restarts
  When you try to install an update in Windows Vista and Windows 7
  http://support.Microsoft.com/kb/949358

  Method 1: start Windows Vista/Windows 7 with the Windows installation media, and then
  Use the repair feature

  How to do a startup repair in Vista and Windows 7
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  You can also do a safe mode startup repair to Access Options recovery if you
  have at their disposal, or use the DVD as described above.

  This tells you how to access the system - Vista Recovery Options
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  This tells you how to access the system - Windows 7 Recovery Options
  http://Windows.Microsoft.com/en-us/Windows7/Startup-Repair-frequently-asked-questions

  Try recovery options Startup Repair

  How to make a startup (Vista) repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  Method 2: start the system in safe mode and then use the system restore feature

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  You can also do a restore of the system of starting with a disk of Vista or Windows 7.

  Method 3: use the downloads at the end of this article - note versions for Vista x 86 32 bit
  and x 64 Vista 64-bit.

  The update is not installed successfully, you receive a message, and the computer restarts
  When you try to install an update in Windows Vista and Windows 7
  http://support.Microsoft.com/kb/949358

  Method 4: at the command prompt or Recovery Options or a Vista disk boot

  Type or copy and paste these in one at a time (not press ENTER)

  c:windows\winsxs\ in the commandprompt
  Press ENTER

  DIR pending.*
  Press ENTER and you should see the pending.xml

  Ren pending.xml pending.old
  Press ENTER.

  -------------------------------------------

  It's the most complete method 4

  Use the Vista startup disk or system recovery options to rename the Pending.xml file and
  Edit the registry:

  In the System Recovery Options page, click command prompt.

  Type cd C:\windows\winsxs, and then press ENTER.

  Type ren pending.xml pending.old, and then press ENTER.

  Type regedit and press ENTER.

  Select HKEY_LOCAL_MACHINE.

  On the file menu, click on load the hive.

  Look for the following folder:

  C:\windows\system32\config\components

  When you are prompted for a name, type Offline_Components.

  In the registry editor, locate and then delete the following registry
  subkey:

  HLKM\Offline Components\AdvancedInstallersNeedResolving

  HKLM\Offline Components\PendingXmlIdentifier

  Exit the Registry Editor:

  At the command prompt, type exit to quit the registry editor.

  Press ENTER.

  Restart the system

  ------------------------------------------------------

  Once you are in Windows I was running once again reset here as a precaution.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  Hope this helps sort it out for you.

  Rob Brown - MS MVP: Bike - Mark Twain said it right.

• New Satellite Pro stuck in the cycle of configuration

  I'm not computer savvy, so that makes me NUTS!

  I just got a new satellite Pro through insurance. I turned it on and it says to its implementation for the first use. Then there are a variety of options for me to click, but does not give me enough time to read what they are still in front of a "System Configuration" screen comes up and takes over. When this is done, it is said do not press the button of the mouse and then log off and stops. Then it restarts and the foregoing goes everywhere again... its repetition on! and keep it doing so again and again and again for well over an hour now! I can't do anything with it!

  What should I do?

  Hi anotherhopeful,

  To be honest, I think that no one here can say something, if you put the model of cell four t post. There are many Satellite Pro models on the market so that it says nothing

  From my own experience, I can say that Windows 7 installation takes a long time and your computer will reboot 10 times or more. Then, you may need to wait a little longer until the installation is finished.

• HP 15.6 laptop "touch screen: laptop stuck in the loop of continuous factory reset

  I brought a laptop that has been the view at Sam model yesterday.  I tried to do a factory reset, but once he gets to "Windows Setup" it makes a continuous loop.  It will start at 64% go to 100%, then restart.  When it turns on, it is always 'Windows Installer' and goes right to 64% and then 100%, then restart.  I started at 22:45 (28/07/2016) last night and it's always the same.

  What can I do to stop the program?

  Hey @GwenC,

  Please try the steps prescribed by my colleague. The path to resolution would play a HP System Recovery. You can learn more about this process here. If you have not already created a recovery media, I advise you to contact our technical support team here: (contact) / 10282847/model https://support.hp.com/us-en/contact-hp/product/HP-Pavilion-Gaming-15-ak100-Notebook-/10402445

  The alternative who get the computers at the point of purchase for a trade (if you are still in their chronology of return).

  I hope this helps. Good luck!

• Pavilion 15-P008TX: laptop stuck in the loop of continuous reset

  Please someone help me. My phone was messed up since I've updated.

  This all started when I got a notification of update to windows 8.1. It was all good until the next day when I started it up and it wouldn't pick up any Internet connection, even though I knew that my router was working as I could get Internet access on my mobile. I went to the network and sharing Center and he said he was disabled so I right click on it to enable. After I clicked it, my laptop has a blue screen and came up with the following message will appear something like this: we had a problem, we collect some error information, and we will restart your device.

  So, it restarted and I tried to re activate the network again and it's the same thing. After about 5 tries the occurrence of thing kept rebooting. I didn't know what to do so I thought to just restore the laptop. I did it and now it's just in this reboot loop continuous blue screen. I can't even log in window, it just keeps going to the blue window, then restarting.

  This is a new laptop, not even 6 months and he was going well until I was told to update. I think just taking in the repair center that I have warranty and I feel as if I can't fix it myself that I can't in my real desk.

  Yes. After the resumption, if the problem persists, call our technical support at 800-474-6836. If you do not live in the United States / Canada region, please click on the following link to get help from your region number: phone help around the world.